home · Installation · Technical characteristics of Vetonit plaster. Weber Vetonit “Profi Gips” Gypsum superplastic white plaster (30 kg) Vetonit plaster profi gypsum 30 kg

Technical characteristics of Vetonit plaster. Weber Vetonit “Profi Gips” Gypsum superplastic white plaster (30 kg) Vetonit plaster profi gypsum 30 kg

Profi Gips plaster is the most modern gypsum plaster today. The advantages of plaster include a smooth surface after drying due to the fine grain, high strength due to the reinforcing fiber in the mixture, plasticity during application, as well as low consumption due to the use of modern fillers.

We are a representative of the manufacturer and are ready to deliver Weber plaster Vetonit "Profi Gips" to your facility, as well as reduce the price of gypsum plaster "Profi Gips" when purchasing a batch of 10 tons or more.

Purpose

  • Basic leveling of walls and ceilings in dry rooms with normal humidity, as well as the kitchen, corridor, bathroom (except bathrooms);
  • Leveling walls with a layer of up to 50 mm (locally up to 100 mm);
  • Manual and mechanized application;

Suitable bases:

  1. concrete, foam concrete;
  2. brick;
  3. plastered surfaces;
  4. gypsum surfaces.

Specifications

Colorwhite*
Bindergypsum
Aggregateperlite
Recommended layer thickness, one application, mm5-50 (locally up to 100)
Mixture consumption, kg/m2/10 mm9-10
Water consumption, l/kg0,45-0,55
Water consumption, l/30 kg bag13,5-16,5
Solution application time, minutes30
Trimming time, minutes40
Drying time (one layer 10 mm), days1-3
Compressive strength, not less, MPa (28 days, +23C, relative humidity 50%)3
Strength of adhesion to concrete, not less, MPa (28 days, +23C, relative humidity 50%)0.4
Storage6 months from the date of production, if stored in original packaging in a dry place

Thanks to the use of modern microfiber in the production, weber.vetonit PROFI GYPS has high strength characteristics and special elasticity, which ultimately allows for high quality finishing surface.

  • Basic leveling of walls and ceilings in dry rooms with normal humidity, as well as the kitchen, corridor, bathroom (except bathrooms);
  • Leveling walls with a layer of up to 50 mm (locally up to 100 mm);
  • Manual and mechanized application;
  • Suitable bases:
    • concrete, foam concrete;
    • brick;
    • plastered surfaces;
    • gypsum surfaces.

SPECIFICATIONS

Color white*
Binder gypsum
Aggregate perlite
Recommended layer thickness, one application, mm 5-50 (locally up to 100)
Mixture consumption, kg/m2/10 mm 9-10
Water consumption, l/kg 0,45-0,55
Water consumption, l/30 kg bag 13,5-16,5
Solution application time, minutes 40
Trimming time, minutes 60
Drying time (one layer 10 mm), days 1-3
Compressive strength, not less, MPa (28 days, +23C, relative humidity 50%) 3
Strength of adhesion to concrete, not less, MPa (28 days, +23C, relative humidity 50%) 0.4
Storage 6 months from the date of production, if stored in original packaging in a dry place

*Gypsum dry mixes can be of different types white. It depends on the natural impurities in gypsum stone. The color of the mixture does not affect its characteristics.

COLOR

Weight of packing: 30kg

INSTRUCTIONS FOR USE

Preparing the base

The base must be solid, clean, free from dust and dirt. Substances that weaken adhesion such as grease, dust, etc. must be removed.

Windows and other untreated surfaces must be carefully protected.

To improve adhesion strength plaster mixture with the base it is necessary to treat the surface with a primer weber.prim contact. After applying the primer, you must allow it to dry completely (drying time 24 hours). Avoid dusting the primed surface.

Preparation of plaster

Gradually pour a bag (30 kg) of dry mixture into a container with 13.5-16.5 liters clean water while stirring. Recommended water temperature + 20°C.

Mix using a drill with an attachment for 1-3 minutes until a homogeneous consistency is obtained.

During the process of applying the solution to the surface to be plastered, you cannot add water or dry mixture!

It is not allowed to add other components to the solution.

Application

Cooked plaster mortar within 40 minutes after mixing, apply a layer of 5-50 mm to the surface with a trowel, locally up to 100 mm. Then level it using a zigzag motion.

When applying several layers, the second layer of plaster is applied without waiting for the first layer to completely dry (after 2-3 hours). Plaster ceilings only in one layer with a thickness of no more than 15 mm.

As soon as the plaster solution begins to set (approximately 60 minutes after mixing), level the surface with a metal trapezoidal lath or wide spatula, cutting off the excess and filling the recesses.

To get more smooth surface under decorative finishing(wallpapering, painting) the surface must be treated using finishing and super-finishing putties: weber.vetonit KR, weber.vetonit LR+, weber.vetonit LR Pasta.

CLEANING THE INSTRUMENT

For work, use clean tools and containers (contaminated tools and containers reduce the time of use of the plaster solution). After use, wash the tool with water.

Careful planning is necessary to achieve the best results. plastering work, taking into account the curing time gypsum plaster.

During work, the temperature must be above +10°C.

The water temperature for mixing the dry mixture should be in the range from +5°C to +30°C.

PRECAUTIONARY MEASURES

When working, you must use rubber gloves; avoid contact with skin and eyes; In case of contact with eyes, rinse big amount water; keep away from children.

DISPOSAL INSTRUCTIONS

The dry mixture and hardened material must be disposed of as construction waste. The material must not be discharged into the sewer. Dispose of the paper bag as regular waste.

GYPSUM PLASTER WEBER.VETONIT PROFI GYPS

White gypsum superplastic plaster.

PURPOSE:

Basic leveling of walls and ceilings in dry rooms with normal humidity, as well as in the kitchen, hallway, and bathroom. node (except bathrooms);

Leveling walls with a layer of up to 50 mm (locally up to 100 mm);

Manual and mechanized application;

Suitable substrates: concrete, foam concrete, brick, plastered surfaces, gypsum surfaces.

ADVANTAGES:

Reinforced with microfiber - up to 50 mm without cracks;

High quality finishing surface;

Easy to throw on and level;

Crack-resistant;

Superplastic when applied manually or mechanically.

INSTRUCTIONS FOR USE:

Preparation of plaster:

Mix using a drill with an attachment for 1-3 minutes until a homogeneous consistency is obtained.

During the process of applying the solution to the surface to be plastered, you cannot add water or dry mixture! It is not allowed to add other components to the solution.

Foundation requirements:

The base must be solid, clean, free from dust and dirt. Substances that weaken adhesion such as grease, dust, etc. must be removed. Windows and other untreated surfaces must be carefully protected.

To increase the adhesion strength of the plaster mixture to the base, it is necessary to treat the surface using weber.prim contact primer. After applying the primer, you must allow it to dry completely (drying time 24 hours). Avoid dusting the primed surface.

Application:

Within 30 minutes after mixing, spread the prepared plaster mortar onto the surface with a trowel in a layer of 5-50 mm, locally up to 100 mm. Then level it using a zigzag motion.

When applying several layers, the second layer of plaster is applied without waiting for the first layer to completely dry (after 1-1.5 hours). Plaster ceilings only in one layer with a thickness of no more than 15 mm.

As soon as the plaster solution begins to set (approximately 40 minutes after mixing), level the surface with a metal trapezoidal lath or wide spatula, cutting off excess and filling the recesses.

To obtain a smoother surface for decorative finishing (wallpapering, painting), the surface must be treated using finishing and super-finishing putties: weber.vetonit KR, weber.vetonit LR+, weber.vetonit LR Pasta.

To achieve the best result, it is necessary to carefully plan the plastering work, taking into account the curing time of the gypsum plaster. During work, the temperature must be above +10 °C. The water temperature for mixing the dry mixture should be in the range from +5 °C to +30 °C.

PRECAUTIONARY MEASURES:

When working, you must use rubber gloves;

Avoid contact with skin and eyes;

In case of contact with eyes, rinse with plenty of water;

Weber gypsum plaster. Vetonit Profi Gypsum is used for basic alignment walls and ceilings in dry rooms with normal humidity, as well as the kitchen, corridor, bathroom (except bathrooms); for leveling walls with a layer of up to 50 mm (locally up to 100 mm). It allows you to create solid foundation under finishing due to the high strength of the composition. Plaster can be applied both manually and mechanically.

Used for application on the following substrates:

    concrete, foam concrete;

  • plastered surfaces;

    gypsum surfaces.

Gypsum plaster Weber.Vetonit Profi Gyps contains microfiber, which guarantees high strength, gives super plasticity by improving the viscosity and consistency of the solution, promotes uniform drying over the entire plastered surface and guarantees the absence of cracks. Due to finely ground gypsum, superplastic plaster is easier to level and smooth. The quality of the final surface is smooth and uniform.

Weber.Vetonit Profi Gyps plaster has increased adhesion to various reasons. It is easy to apply, does not slip, and minimizes the possibility of peeling in a thick layer.

Features of gypsum plaster Weber.Vetonit Profi Gyps:

    Reinforced with microfiber - up to 50 mm without cracks.

    High quality finishing surface.

    Easy to throw on and level out.

    Crack-resistant.

    Superplastic when applied manually or mechanically.

Attention! Gypsum dry mixes can be of different white colors. It depends on the natural impurities in the gypsum stone. The color of the mixture does not affect its characteristics.

During work, the temperature must be above +10°C. The water temperature for mixing the dry mixture should be in the range from +5°C to +30°C.