Making a corner cabinet with your own hands, useful tips. Do-it-yourself corner cabinet: secrets, tips, diagrams, assembly steps. How to make a corner cabinet with your own hands? DIY corner wardrobe diagram

Corner kitchen cabinets are quite popular furnishing items. They do not take up too much space due to the unique location. Corner cabinets can be made at home from various materials. Of course, you can cope with the task by doing as indicated in the instructions below.

The positive aspects that distinguish a corner wall cabinet for the kitchen include:

• increasing the usable area of ​​the room due to proper placement of furniture. Installation is carried out in places where it is difficult to install other options;
• high capacity and functionality. At first glance, it may seem that corner floor cabinets are not so large, however, inside them you can install a variety of shelves and arrange compartments for organized storage of food and utensils;
• the ability to choose optimal sizes, since floor-standing cabinets are varied in size. Almost every person is able to understand how to assemble comfortable cabinets for the kitchen, giving them the necessary parameters;
• variety of methods that can be used to decorate front panels. If desired, the kitchen floor cabinet can be decorated with glass inserts or patterns. This will make the finished product more attractive. However, Leroy Merlin kitchens already look aesthetically pleasing and do not require any additions;
• Possibility of combination with other items in the kitchen.

Main features of corner models

The list of the most important differences includes:

• doors are not required. The open top cabinet is great for storing beautiful crockery sets;
• variety of forms. The design can be triangular, L-shaped, or even trapezoidal (by the way, triangular variations have become very widespread in our time). Choosing the right varieties depends on the people who will be using the cabinets and their preferences;
• the lower part of the structure, located on the floor, is often used to create sinks. The sink placed on top will be convenient to use;
• it is possible to integrate large types of household appliances for their more efficient operation;
• Various methods are used to decorate the facade. The most common options are applying a pattern to wall cabinets or upholstering them with some material;
• the lower cabinet under the sink is often equipped with legs, which makes cleaning the room easier;
• The upper corner cabinet can be equipped with carousel shelves to store dishes and other accessories.

Corner kitchen cabinet dimensions

The dimensions of kitchen furniture can vary widely. If they are included in the kitchen set, then they have optimal sizes for combining with other components of the set. If the cabinet is selected separately or designed independently, then it must match the other elements.

For a person who is going to create a corner kitchen cabinet with his own hands, it is very important to determine the dimensions of the future product. They are poured depending on whether the new piece of furniture will be located on the floor or on the wall.

The corner-type hanging cabinet has standard dimensions. The width is 15-80 cm, and this parameter must correspond to the shape of the cabinet and its width. The standard depth is 35 cm, however, the calculation must take into account the depth of the drawers that will be located below. It is recommended to install the finished product at a distance of 50 cm from the cabinets located below. These are the standard dimensions of any wall cabinet. Those people who are interested in how to calculate the corner option without making a mistake need to know this.

If we are talking about creating floor furniture, then it will have other standard sizes. They need to be taken into account when planning to make a kitchen drawing. For a compact room, a cabinet with a depth of 50 cm, no more, is better suited. The typical height is 85 cm (however, this can be varied in individual cases). The width can be 15-80 cm, with the optimal figure being 60 cm.

As a rule, the lower element is installed after the installation of the upper one has been completely completed. The owner has the right to choose furniture with or without legs.

Corner cabinet for sink

A cabinet under the sink is a very common option. Its dimensions can vary widely, as they depend on the washing parameters. You also need to take into account the method by which the structure will be secured. For such cabinets, standard sizes are calculated individually. The width can be more than 60 cm, and the depth can reach 80 cm (the downside is that such an interior element will be very difficult to use). As a rule, for large products a pair of facades is chosen. However, if necessary, assemble models with one door.

Taking measurements and drawings

The assembly of a corner cabinet cannot begin without creating a diagram. In turn, to carry out drawing work, you need to take measurements, and then create a kitchen diagram so as not to make a mistake. When performing this work, you need to take into account some nuances:

• The thickness of the walls should be chosen taking into account what objects will be placed on them. It is important to show on the diagram whether the finished structure will accommodate household appliances or not. The thickness of typical shelves is 18 mm. If you plan to store something heavy on them, it is better to choose blanks with a thickness of 21 mm or more;
• the depth of the finished products should not be more than 40 cm;
• You should not place the hanging cabinet too low if there is a stove directly underneath it, as the material will deteriorate under the influence of elevated temperatures.

According to the standards, the size of a corner cabinet is 60x60 cm, while the width of the front panel is 42 cm and the depth is 30 cm. A corner kitchen is an excellent option for small apartments where it is difficult to implement another arrangement option. Look at the photos presented on our website to find the perfect option.

1 2 3

How to make a corner cabinet for the kitchen?

1. Choose the right material and purchase it in the right quantity. Calculating the purchase volume is very simple if you follow the previously drawn up diagram.
2. Prepare the tools necessary for the job. Their list includes: fasteners, hangers, sealing compound, furniture screed, drill, sandpaper, fittings and some other devices. It all depends on what model you plan to create.
3. Prepare the basic details for the future cabinet. It is most convenient to cut them from solid slabs. Be extremely careful when performing this work and use power tools to achieve the best results. Alternatively, you can contact a specialized company that will make blanks at a professional level.
4. Make through holes to insert dowels into them and fasten the individual elements that make up the furniture. Lubricate the chopsticks with adhesive to increase the reliability of the structure.
5. Check the evenness of individual parts of the structure using a level.
6. Screw the confirmations into the dowels using a hex wrench for this purpose.
7. Install the legs and adjust the height. If the design does not require legs, this step can be skipped.
8. Make holes in the side elements and place cross-shaped fastenings for the doors in them.
9. On the walls located on the sides, attach elements for rails, due to which the boxes will roll out. Secure the rails.
10. Attach the back wall.
11. Secure the fittings.

Corner cabinet diagram Corner cabinet drawing

The presented instructions will help every person understand how to make a corner cabinet for the kitchen with their own hands; the various diagrams and drawings presented here will simplify the solution of this problem. If you complete all the work correctly, you will enjoy the finished cabinet installed in the corner for a long time.

A drawing of a corner cabinet will help you assemble it yourself.

If the room area is small, then each cabinet takes up a lot of space. There is a way out of this situation: instead of several bulky cabinets, you need to install one corner cabinet.

It is very roomy and takes up little space. You can learn how to make a corner cabinet with your own hands from this article.

In contact with

Classmates

Types of corner cabinets

Before you start work, you need to figure out what shape the future cabinet will be. He can be:

• trapezoidal;
• in the form of the letter “G”;
• triangular;
• 5-wall.

Each option is interesting in its own way; when choosing, you need to take into account the place where it will be located. Before work, be sure to make a sketch or drawing of the planned cabinet and make detailed drawings.

When performing calculations, it is necessary to carefully measure the dimensions of all walls and shelves. How to make a standard small cabinet with dimensions of 900 by 900 mm, a height from floor to ceiling of 2,500 mm, will be discussed in more detail below. Calculations of materials and a detailed assembly diagram will be presented.

Manufacturing process

Any construction work begins with the preparatory stage.

1. 1. A diagram of a corner cabinet is being drawn up.

1. 1. It is necessary to calculate how much and what material will be needed for the work. To make the calculation more accurate, an assembly diagram is also first drawn up.

1. Prepare the necessary tools and materials.

• self-tapping screws;
• glue;
• dowels;
• mirrors;
• accessories;
• rollers, there is no need to save money here, it is better to take high-quality ones so that they last a long time;
• profile, preference is given to steel.

Immediately check the set of tools so that there is no downtime in work later. You will need:

• level;
• roulette;
• hacksaw;
• hammer.

In order for the work to be done more accurately and quickly, it is better to entrust the cutting of the boards to the craftsmen and do this work in the workshop. You can do the assembly yourself.

Specification of sizes

1. The width of the compartment where outerwear is stored cannot be less than 0.8 m.
2. The height of the compartment for storing outerwear cannot be less than 1.4 m.

Pre-planned diagrams will help you avoid making mistakes in sizes.

Assembly

• first, steel corners are mounted where later it will be necessary to attach the side walls to the floor and ceiling;
• assemble a frame from ready-made parts;
• attach rollers to the door;
• install guides;
• install doors.

Good to know: When assembling a corner cabinet, it is imperative to use a level, otherwise distortions at the doors may occur.

When the main work is done, you need to assemble the cabinet inside. Install the brackets and arrange all the shelves in their places. After this, all that remains is to install the fittings.

The work is carried out in the following sequence:

• install partitions;
• secure shelves, hangers, mirrors;
• screw the handles.

Using the same scheme, you can assemble your own cabinet from plasterboard. The operating principle will be slightly different.

Corner cabinet made of plasterboard

To manufacture, you will first need to carefully work on the drawings. The quality and speed of work will depend on how they are made. The drawings are made as follows:

1. We need to decide on the location of the future cabinet.
2. Make a sketch, sketch out a detailed diagram, and indicate the dimensions of all shelves, brackets, and parts.
3. All calculations should be carried out indicating the thickness of the material.

Note: When making a drawing, it is necessary to take into account every detail, the slightest inconsistency, and there will be difficulties during assembly.

Assembling a cabinet begins with installing the frame. First, markings are made on the floor and ceiling. For convenience, you should use a rubber shock-absorbing tape.

Sheathing

1. Pre-cut blanks are placed in the designated places and screwed with self-tapping screws.
2. The sheets are finally attached; the screws are placed at a distance of about 200 mm. The caps of hardware should be recessed by 1 mm.
3. In the places where the shelves will be attached, you need to install corners. Next, the shelves themselves are laid on them.

Take note: There is no need to order cabinet doors in advance; it often happens that after installation work, the dimensions change slightly.

Now all that remains is to mount the lamps and rods. When the main frame is ready, you need to measure everything again and order the doors.

Finishing

• prime the surface both inside and outside;
• carefully seal all joints with gypsum plaster;
• stick the crescent tape;
• install paint corners at all corners;
• apply a thin layer of putty, dry, sand and putty again;
• prime everything again, and after complete drying, finish it. This could be painting or finishing with tiles or other materials. Here the owner chooses at his discretion.

The entire closet is ready and will delight all household members for a long time.

How to make a corner cabinet with your own hands, see the following video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Despite their apparent compactness, corner cabinets are very spacious. Their ergonomic design is also valued because it allows you to beautifully and functionally create a whole modular complex of cabinets, pencil cases, mirrors, cabinets and arrange them into a single composition. Drawings of corner cabinets with dimensions will help you create your own project for the bedroom, hallway, nursery or living room.

This article discusses various options for internal filling for a corner cabinet with a height of 2200 mm and dimensions from a corner of 900x900 mm. With a side depth of 450 mm, a doorway 613.8 mm wide is formed, which is usually closed with two leaves.

You can easily adapt the proposed options “to suit yourself” by stretching or narrowing the drawing to the desired size. We will also consider how to do this correctly from the point of view of the rules for designing cabinet furniture.

Drawing of a corner cabinet with shelves

The typical internal content of a corner closet involves a rack with shelves on one side and a rod for clothes on the other. But you don't always need a wardrobe. For example, for a living room or children's room, a drawing of a corner cabinet with dimensions, filled with only shelves, is more relevant. By the way, if the kitchen is quite spacious, you can also install such a module in it.

The internal design assumes the presence of an internal partition. Thus, the space is “split” into two zones - with long shelves going deep and an independent pencil case. It is quite possible to build drawers into one of the niches of the resulting pencil case if you need a place to store some small items.

Drawing of a corner wardrobe with rods for short clothes

For a boy’s teenage room or a “men’s” bedroom, there is a reason to design a corner wardrobe with shelves and two-level rods for short clothes.

If there are not so many clothes on hangers (shirts, jackets, jackets, trousers), then you can remove the top bar, replacing it with three shelves. By analogy with the previous option.

Drawing of a corner cabinet with a mezzanine shelf

This scheme for the internal filling of a corner cabinet is quite universal. A lot of ready-made modules are made using it; they can be found in serial furniture from various manufacturers.

The drawing of a corner cabinet with a deep mezzanine shelf, a section for hangers and a shelving unit can be used to create a project anywhere: in the hallway, bedroom, office, nursery.

Drawing of a wardrobe with hangers for clothes

It’s a good idea to use the corner closet space completely for clothes on hangers.

This option is quite appropriate in a spacious hallway if the shelves are placed in a separate pencil case. A shoe rack, an open hanger for seasonal clothes, a chest of drawers for accessories and other small items will help expand the functionality of a furniture set for the hallway. Still, it’s more convenient to store all your outerwear in a separate place where there is simply nothing else (well, maybe a couple of shelves for shoes, in a section designed for long clothes).

How to change the dimensions of a corner cabinet according to the drawings provided

Regardless of the overall dimensions of the corner cabinet, the internal content of the design will remain the same as discussed above. It is possible that drawers and baskets, hooks and trousers, and other storage systems will be added. But the structure itself, the internal frame remains the basis.

There are two ways to change the overall dimensions of corner cabinets according to the drawings discussed.

The simplest and most understandable way is to leave the facade unchanged, narrowing or expanding the depth of the sidewalls.

In this case, the internal filling will also shrink or expand, according to the drawing. This method is suitable if the standard dimensions need to be changed slightly, within the range of 50-150 mm. For example, if you need to make a corner cabinet with your own hands measuring 750x900 mm, 1000x800 mm, 1000x1000 mm, and so on.

With all other options, it is necessary to change the facade part, expand it or narrow it.

A striking example of the minimum dimensions of a corner cabinet is a wall kitchen cabinet. With dimensions of 600x600 mm and a side depth of 300 mm, the doorway is about 400 mm.

For corner wardrobes, the width of the doorway is practically unlimited. After all, instead of two sliding doors, you can install three, if the opening allows it.

The main nuances when drawing up drawings of corner wardrobes

When designing such cabinets, they tend to use built-in and semi-built-in structures. The bottom of the corner wardrobe is almost always removed. Internal partitions and shelves are attached to the floor and walls. The roof of the corner wardrobe is also optional. Usually they refuse it altogether.

In fact, a large corner wardrobe is a dressing room, an enclosed part of the room into which you can go.

The smallest corner dimensions are limited only by the width of the doorway. The compartment door should not be narrower than 600 mm, otherwise it will be unstable on the track. Basic standards for design can be read in the article "".

For example, with dimensions of 1200x1200 mm from the corner and a sidewall width of 400 mm, the opening for the compartment doors will be about 1200 mm in the center of the track.

At the same time, the width of the guides will “eat” about 150 mm from the functional depth of the sidewalls. This also needs to be taken into account when designing the internal content of a corner wardrobe. Nothing should interfere with the doors when moving.

As an option, you can place niches for hooks (if you are drawing up a drawing of a corner wardrobe in the hallway), an ironing board or shallow shelves.

The closet plays an important role in any interior. It is not surprising that strict requirements are imposed on it: not to take up too much space, to be spacious, to have a sufficient number of shelves and drawers. The models on the market do not always fully satisfy individual wishes.

But the online store has both ready-made cabinet options and custom-made ones. So experienced craftsmen will assemble the future owner’s closet to suit any of his whims and desires.

Owners of apartments with non-standard layouts find it even more difficult to choose an option that fits into the room. In this case, you can order a cabinet from specialists who will take into account all your wishes regarding the design and internal contents.

Unfortunately, this option is not affordable for everyone. Then the best solution to the problem will be to use your own hands and ingenuity, because assembling a cabinet yourself is not at all difficult!

Preparatory stage

Each room has its own type of construction, so it’s worth familiarizing yourself with the main ones.

A cabinet with a closed front is a straight model with hinged doors. To open them, you need to provide additional space; do not forget about this if you are making a closet for the hallway.

A cabinet with an open front has no doors, and its contents are in plain sight. It makes certain demands on order.

The wardrobe doors are mounted on a rail mechanism and open, moving to the sides. There are designs with top and bottom rails; which one to choose is a matter of taste.

Ideal design for built-in wardrobes

A corner cabinet fills a corner. Suitable for any size room, as long as it is square or similar in shape.

Having chosen a suitable design, you can begin to create a project for the future cabinet. Since this piece of furniture lasts for many years, it is worth considering what functionality may be required from it. It is better to build a drawing on whatman paper, recording all measurements there.

Decide on the location and dimensions of the cabinet. If there is a niche in the room - ideal, but if it is not possible to build it in, choose a place where nothing will interfere with it.

Consider the internal content: the location and number of shelves and drawers, their sizes, additional elements such as mezzanines or interior lighting.

Do not forget about the choice of external decoration and decorations. The colors “oak”, “alder”, “beech” are the most popular today. Or you can choose wood with an interesting pattern and leave the original pattern. Get creative and decorate the doors with a carved pattern.

Materials

The material can be natural wood, plywood, MDF or chipboard - all of them are used by furniture manufacturers.

Wood is environmentally friendly, does not require additional decorations, and is convenient to work with. A wooden cabinet will last for many years and will look solid and impressive. An ideal choice for an interior in a classic style.

Plywood consists of glued veneer sheets (birch or coniferous trees are used). This cheap, practical material is suitable for making almost any furniture. It is best to choose laminated plywood (FOF brand).

Chipboard (chipboard) is the cheapest and most common option. When assembling your own closet, this is usually what you use. Short-lived.

Self-adhesive melamine film is also useful for processing the side edges.

The diameter of the rod must be at least 22 mm. The easiest way is to buy it in a specialized store. You can also buy pens there.

Tools

• Ruler, tape measure, pencil and others for taking measurements and drawing.
• Level.
• Jigsaw or hacksaw for cutting.
• Screwdriver or drill and screwdriver.
• Glue.
• Ratchet key.
• Iron for gluing the edging film.
• Accessories. Each door opening mechanism has its own kit.
• It is better to buy confirmations for a cabinet made of chipboard that are 7 cm long and have a diameter of 0.5 cm.

Progress

First of all, measurements are taken and a drawing of the future cabinet is constructed. The final result depends on a correctly drawn up drawing, so approach it with all seriousness.

It’s not difficult to make cabinet doors with your own hands, the main thing is to correctly calculate the dimensions. If its vertical height is less than the height of the opening, the door will not completely close it, and if it is more, it will not fit. When finding the horizontal dimension, we must not forget about the fastening elements: they will add a few millimeters to it. The width of the doors should be ~3 mm less than the opening.

Now you need to mark the placement of the fastening bolts on the sawn parts and drill all the holes.

Assembly begins with installing the bottom and attaching the walls to it. Make sure that the assembled cabinet fits into the allocated space and that other furniture will not interfere with the opening of the doors. If you are making a wardrobe, the guides are installed at this stage.

The location of drawers and shelves is outlined, shelf supports and guides are installed. They must be strictly parallel to avoid distortion.

It's time to install the top shelves and roof. A gap of ~7 cm is left between the ceiling and roof for the installation of confirmations. Fastening is done manually and finally tightened with a ratchet wrench.

The side shelves are attached to 4 confirmata (two on each side); in some cases, dowels (small wooden cylinders) are used. One end of the dowel is inserted into the cabinet wall, and a shelf is put on the other.

The last step is to install the doors. Before installation, attach the handles with the curve outward. For sliding doors, proper installation of the mechanism is especially important. Take your time, act carefully.

It's time to start the finishing touches. Treat the sections with decorative film and decorate the facade. Install mirrors, interior lighting and other elements.

Tricks and nuances

Rely on existing cabinet designs when designing yours.

A corner cabinet requires more care in design and assembly than a straight cabinet, so it may be too complicated for an inexperienced person.

If you lack experience, it is better to entrust cutting out the parts to a master. His hand will not tremble, and the cuts will be smooth and neat.

To avoid getting a part smaller than needed, consider the thickness of the saw. The wall thickness must be at least 18 mm. Otherwise, the strength of the structure will be insufficient.

While working on the drawing, pay attention to the curvature of the floor. If the floor is not level, gaps may appear between the doors. To avoid this, adjust the installation awnings for a swing mechanism, and change the height of the wheels for a sliding mechanism.

Guides for sliding doors should be parallel. Be extremely careful when marking and installing guides for drawers and shelves.

Drill holes for confirmations symmetrically. Use the correct size drill bit. The exact number of confirmations depends on the number of parts. The confirmations are covered with plugs matching the color of the structure.

Installing a mirror begins with installing a seal around the perimeter. The film is glued to the chipboard sections using an iron. Iron it with a cloth, pressing it as tightly as possible. The edges can be trimmed with a regular knife.

Study photos of handmade cabinets: you will get a charge of inspiration and note interesting ideas for yourself.

We hope our tips helped answer the question of how to make a cabinet with your own hands.

Photos of do-it-yourself cabinets

It’s difficult to make a drawing of a corner cabinet yourself; our article will tell you the solution.

You can assemble a corner cabinet with your own hands if you try.

From our article you will learn about all the features of cabinets designed for corners and openings.

In contact with

Classmates

Peculiarities

A sliding wardrobe is the same wardrobe with hinged doors, but they are sliding. This saves up to 600 mm. space in front of him. By design they can be:

1. Built-in.

At the same time, the structural elements of such furniture are the ceiling, floor, as well as the walls of the room. The most economical in terms of using living space.

Labor-intensive to manufacture due to poor-quality construction work. The installation of fasteners causes defects on walls and ceilings. It is no longer possible to move it.

1. Hull.

They differ from built-in cabinets in their mobility and installation time. Protect the wall decoration from contact with the internal contents and doors.

Depending on where they are located inside the home, they can be straight, angular or radial. In turn, corner structures can be created:

• with a beveled corner facade with a hinged door;
• with elements located at an angle relative to each other;
• like two independent pieces of furniture installed in the corner.
• Radial.

Only a real understanding of the technical advantages and functionality of the chosen design will give a tangible economic and aesthetic effect.

Creativity

The issue of coordinating and budgeting an event with stakeholders is not idle. Not only the technical and economic indicators of the designed furniture, but also the social aspects of family life directly depend on its solution.

Preparing a preliminary design is not as labor-intensive as the main process of creating cabinet or built-in furniture. But it is the accuracy of the developed drawings and diagrams that will be the fundamental stone of the entire event.

• roulette;
• plumb line, levels (not bad if laser);
• squares of various sizes;
• a flat wooden lath or metal profile for drywall.

First of all, we decide on the depth of the furniture. In practice, this size is taken to be 50 cm. Taking into account that 8-12 cm of them will be occupied by doors.

We carefully check the geometry of the location of the future furniture. We especially accurately measure:

• the size of the angle between the walls;
• curvilinearity and defects of walls;
• distance and parallelism of floor and ceiling;
• we take into account the minimum distance between them;
• horizontality, evenness, rigidity of the floor.

Note: To eliminate unnecessary material costs and increase labor intensity, even without taking into account moral damages, it is necessary to once again check the accuracy of all measurements and the performance of all accessories.

Based on the existing preliminary design and the obtained dimensions, we prepare the project itself, taking into account:

1. Assembly sequences carried out on site.
2. Ensuring the greatest strength and reliability of the structure.
3. In terms of its internal content it must be functional.
4. Ensure ease of installation and further use of built-in fittings.
5. Between the shelves, a distance of no more than 40 cm will be rational.
6. The height of the outerwear compartment is equal to the length of the clothing itself + 10 cm.
7. The practical height for attaching the hanger rod is at shoulder level.
8. The maximum height of the mezzanine shelf is 50cm.
9. The layout of the racks of the lower compartment is carried out depending on the position of the doors, for ease of use.
10. The same applies to drawers and baskets.

Material

Here, both decorative and technological aspects of the aspect should be taken into account. The financial side of the issue is also important. What to choose:

1. Tree.

Traditional, and now even prestigious material. Its disadvantage is the possibility of warping when humidity changes. Alternatively, it may have a right to exist.

1. Drywall.

It is difficult to classify it as a furniture material, but it can still be done. Can only be used in combination with a metal frame, this way you can build. The doors will be made of a different material. It is more of a building structure than furniture.

• Chipboard laminated or cached with decorative film;
• particle board of various densities and moisture resistance.

Children's furniture is made from grade E-1 boards.

• MDF (fine fraction) made of wood impregnated with a binder. It has found its greatest application in furniture making.
• Fiberboard (fibreboard), the same hardboard.

MDF boards and high-density laminated chipboard are the most suitable materials for furniture construction. The most responsible approach should be taken when calculating the width of the sashes.

Expert advice: The calculation is as follows: choose the largest door width. Determine the number of overlaps (1 less than the number of doors). Check the resulting width. If it doesn’t converge, we increase the number of doors. It is possible to change the internal layout.

1. You can't make too many of them. It will just be inconvenient.
2. You can't make it too wide - it will jam if it moves poorly. The most practical width is no more than 700 mm.
3. The overlap of doors must be done within 50-70 millimeters. If there is more, it will be inconvenient to use the internal shelves. If it is less, cracks will appear and you will need to use the sashes with caution.
4. The narrowest shelf should be wider than the door, otherwise it will be inaccessible.

The eyes are afraid

Each of its technological transitions demonstrates real results of work. Of course, we check the availability of the required tool:

• - with drills (for confirmation - 4.5 mm);
• screwdriver;
• circular saw with ruler;
• hand saw;
• corner clamp;
• roulette;
• stapler;
• regular and soft hammer;
• hex key for confirmat (furniture screw).

You will also need confirmations D×L = 6.4×50 mm, self-tapping screws, furniture corners for shelves and wooden dowels. Technological points:

1. Pre-cut and edged sheets of MDF or chipboard are marked for drilling holes for dowels and confirmats. The quality of assembly and the overall appearance of the product depend on the accuracy of the markings.
2. Clamping and drilling of mutually perpendicular parts is carried out using an angle clamp.
3. Drilling for confirmation is performed with a special confirmation drill. It is possible to drill with two drills of different diameters followed by countersinking.
4. The confirmations are tightened with a little force using a hex wrench.

Take note: It is convenient to assemble and fasten the cabinet to the wall using a U-shaped profile.

1. The choice of hangers for sashes is quite large, but the most practical among them are double-rail systems with a bottom support. The best is imported.
2. At the same time, one should keep in mind the possibility of using both a two-rail system with an upper support and a monorail version.

Note from experts: With the top support, it is possible for the sashes to fall out, making their adjustment difficult. With a monorail support, the design and installation are complicated. Care is required during operation.

A cleverly designed and well-executed built-in corner cabinet will make the most inaccessible and neglected space attractive and comfortable. Made with your own hands, it will be a source of pride for a long time.

How to make a corner wardrobe with your own hands, see the following video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!