How to clean floors after renovation? How to clean a floor after renovation - cleaning various floor coverings What product to wash floors after renovation

Ceramic tiles are the most popular material for covering walls and floors in bathrooms, kitchens or hallways due to many advantages. This facing material not only has an attractive appearance, but is also resistant to moisture and other influences.

But even a material such as ceramics can become dirty and lose its original shine and appearance, so in some cases it is very difficult to wash the floor.

note

It is better to remove dirt or stains immediately so that they do not have time to dry and be absorbed into the coating!

How to clean a tiled floor after renovation?

After the long-awaited renovation, first of all it is necessary to remove all construction waste and put the apartment in order, but the question arises of how to clean the floor after renovation and other contaminants. And if the floor is made of tiles, then how to wash the tiles on the floor so that they do not lose their original appearance and shine.

First of all, it is worth noting that cleaning must be carried out consistently, and before you grab a rag to wash the floors after renovation, you should think about the seams between the tiles, which are much more difficult to clean.

note

To clean seams from old stains, you need to use citric acid. But, only if they are not covered with a protective layer, such as varnish. Then the use of aggressive substances can only cause harm.

How to clean floors after renovation if the coating is not protected with a special film? First of all, you need to remove debris and sweep or vacuum all dust, since small grains of sand can damage the glossy surface of the tile.

How to clean grout from tiles - grandma's video tips

After dry cleaning, remove large particles of dirt or stuck pieces of plaster using a sharp blade so as not to damage the coating. If some contaminants cannot be removed, treat them with a special solution. Cleaning glossy tiles is much more difficult, since cleaning will require special care and delicacy on your part so as not to damage the surface.

note

Do not use abrasive or aggressive products to clean marble floors.

If paint stains get on the tiles, wash them with a special solvent. How to wash floor tiles if there is cement, putty or other similar contaminants on the surface or between the tiles?

At home, they are removed with a damp plastic spatula. If you have treated the walls or ceiling with lime, the task arises of how to wash whitewash from the floor? This solution can harm the tiles, so it must be removed as quickly as possible using vinegar or vegetable oil. Then rinse the coating with a non-abrasive dishwashing detergent, Dosya will do.

How to properly clean porcelain tiles from grout

How to wash tiles if construction dirt, glue or lime is stuck between the tiles? In this case, you can use sandpaper, but the seams should be handled carefully so as not to scratch the glossy tile.

And to the question: how to clean construction dust from tiles after renovation? The answer is: if you need to clean a glossy finish from dust, use a regular tile floor cleaner or any non-abrasive detergent. To clean grooved floor tiles, use a soft brush and detergent.

How to remove fungus and mold from tiles?

In order for the tile coating to have its original shine and aesthetic appearance, it is necessary not only to wash the tiles and joints frequently, but also to treat them with special antifungal agents, for example, the antiseptic “Antifungal” copes with this problem remarkably well.

In the kitchen or bathroom, the problem of fungus or mold worries every housewife, since these rooms have high humidity. That is why you can often hear the question, how to clean mold and mildew from tiles, as well as how to prevent their occurrence?

You can completely get rid of this scourge only if you eliminate the causes of mold, and this, as everyone knows, is high humidity in the apartment. Therefore, industrial antiseptics cope with this problem only partially, removing the fungus only for a while.

New or old tiles are most often washed or treated with special antifungal agents. But there are also many other ways that skillful housewives use, for example:

• dirt, fungus or mold can be removed using liquid bleach; to do this, dilute the product with water in a ratio of 1:10 and apply to the tiles and grout and rinse off after 15-20 minutes;
• Using borax, you can also clean joints from fungus and mold by diluting a glass of borax in a three-liter jar of water;
• baking soda can remove not only unwanted dirt, but also an unpleasant odor; to do this, treat the desired area with a damp sponge and baking soda and rinse with water.

note

If the seams are treated with colored grout, do not use bleach or bleach to clean them!

If fungus or mold has deeply affected an area of ​​the tile covering, you need to completely replace it. To do this, treat the affected area with a special antifungal solution, for example, Ceresit CT10 antifungal water-repellent impregnation for tile joints

Afterwards, wash the tiles from the grout and use a spatula to remove the grout from the joint. Saturate the joints again with antifungal agent and let it dry before covering the joints with new grout.

note

After frequent cleaning of the seams, they begin to wear out, so the grout should be renewed from time to time.

How to care for a tiled floor?

How to clean tiles on the floor so that they always look like new and do not lose their shine? Cleaning the floor after renovation or from daily dirt will require you not only to be patient, but also to be careful, especially if the tiles are glossy. To clean floors without streaks, you should use special cleaning products for glossy tile floors.

How to wash tiles from stubborn stains so as not to damage the tiles and clean the grout? First of all, spilled tea or coffee should be cleaned up immediately with a damp cloth so that the dirt does not penetrate deeply. After this, you can wash the tiles with detergent and clean the seams with a soft brush.

Advice from experts on washing glossy tiles without streaks that remain even from whitewashing

If you don’t know how to clean the floor after repairs, since your floor tiles have a rough structure, use a special protective film to cover the floor before starting repairs.

There is a lot of housework, one of the rather difficult stages is washing the floors. But no matter how hard you try, there are often contaminants on the floor that are not so easy to remove with a wet cloth; stronger products are needed here.

So, all floors are different, as are the methods for cleaning stains from the floor. We'll figure out.

Dirt on a wooden floor

To ensure effective cleaning of a wooden floor, prepare everything you need, namely:

• soda;
• vinegar;
• sandpaper;
• stain;
• cotton swabs.

The procedure for cleaning a wooden floor from contamination consists of the following steps.

1. Rub off stains with sandpaper and remove debris.
2. Prepare a mixture for cleaning (it includes 1 liter of water and 3 tablespoons of soda).
3. Wipe the stained area with the prepared mixture, wait 1-2 hours and wipe again, and so on until the stains disappear.
4. Wait until completely dry.
5. Wipe the now uncontaminated area with a cotton swab soaked in vinegar.
6. Select the required stain or paint.
7. Apply it to the floor.

The mixture considered is good, but still not ideal. Sometimes you have to use a special chemical composition, which is freely available in hardware stores.

Before treating the floor with such a solution, you need to perform the following manipulations:

• open the windows;
• cover furniture;
• wear goggles, gloves and a respirator.

When all necessary preparations have been made, lubricate the contaminated area with the chemical composition using a brush. If parts of the coating are swollen, simply scrape them off. Just do it carefully and carefully.

The last step to complete the floor cleaning procedure is to rinse the area being treated.

If necessary, the process can be repeated, only using oxalic acid.

Secrets of parquet beauty

Before you decide on what means to clean stains on parquet, you need to know how to properly care for it.

Caring for parquet floors is simple and includes several points.

• Sweep the floor with a soft brush every day.
• Vacuum at least once a week.
• If there is excess moisture, wipe immediately with a towel or damp cloth.

If the floor has been varnished relatively recently, for two weeks after this procedure you can only clean the parquet with a vacuum cleaner, and forget about wet mops for a while.

But pollution that cannot be dealt with so easily cannot be avoided. Insidious spots appear and haunt you. The process of dealing with them is difficult, and if it does not bring the desired result, it is also not very pleasant.

But, knowing the main secrets, removing even the most “harmful” stains will not be difficult.

Grease stains can be easily removed using:

• warm water with dishwashing detergent added to it;
• denatured alcohol.

But paint stains can only be removed with a water-alcohol solution in a ratio of 1:3.

Wax on hardwood floors is not uncommon and will require an ice pack to remove it. After freezing, it will come off easily, all that remains is to scrape it off with a non-sharp object to avoid damage. This procedure is ideal for removing chewing gum and stains caused by tar or tar. And the chemical solution will deal with all remaining traces.

Many parents are faced with pencil drawings on the parquet floor. Creative children are, of course, nice, but painting on the floor does not evoke such positive emotions. There is no need to worry or worry: “White spirit” will save the parquet from children’s pranks. If you don’t have it at hand, you can try to erase the art with toothpaste.

There is an opinion that blood leaves stains that are difficult to remove. Nothing like this. If the marks are fresh, they can be easily wiped off with plain water, but to remove old marks, ammonia must be added to the water.

Accidentally spilled nail polish is no reason to panic. The stain must be moistened with acetone, and then cleaned well with the rough side of the sponge moistened with alcohol.

Fruit stains are removed using two products that are found in every home - water and detergent. The second component, if necessary, can be replaced with oxalic acid.

If the problem with your parquet floor is traces from rubber soles, a regular eraser will come to the rescue.

Dealing with stains on the floor is easy; the main thing is to know what needs to be applied and in what situation. And then the procedure for cleaning the floor from dirt will be effective.

No repair is complete without dirt and dust. Regardless of what exactly is being repaired (ceiling, walls, etc.), most of the unpleasant dirt remains on the floor. Even if you try to carry out all the work carefully, whitewash, paint, plaster or simply construction dirt and debris may get on it. That is why, when starting cleaning work after renovation, you should pay special attention to the floor. The choice of product in this case will depend on what exactly it was contaminated with and what kind of flooring was smeared during the repair process. It should be borne in mind that not all remedies are suitable for a particular case.

Most of the dirt after repair remains on the floor, even if repair work is carried out with the utmost care.

Sometimes it can be very difficult to clean the floors from accumulated dirt. You can't do it all at once. You will have to at least wash the floor in several stages. First, a soap solution is used, with which the surface is well wetted and left for some time. After this, special detergents are used. At the same time, you need to try to wipe off all the dirt. Now the floor is washed clean with warm water without any solutions or products. In order to clean the floor faster, you need to wash the rag as often as possible. Do not spread dirt over the entire surface.

Warm water with salt is perfect for cleaning whitewash or plaster floors.

In the event that there is only stubborn dirt on the floor, formed during the process of walking on it during work, you can use the folk method. To do this, you need to add a small amount of kerosene to the water. With its help, even the most stubborn dirt can be washed off without difficulty. Some will refuse this method because of the sharp and unpleasant smell of kerosene, but there is a way out. You just need to pour 200 ml of vinegar into a bucket of water and just wipe the floor clean. There will be no smell left at all.

If after repair there is whitewash or plaster left on the surface, you need to act differently. First of all, it is necessary to sweep and remove all remnants of whitewash. What remains must be washed with concentrated dishwashing detergent. All the whitewash will not be washed off in any case, so the next step is to use warm water with added salt. This will help quickly get rid of stubborn plaster stains. If the whitewash has been washed off, but stains from it still remain, you can try adding ordinary potassium permanganate to the water. She will quickly eat away all the stains. Its color should be bright pink.

Cleaning various floor coverings after renovation

Washing the parquet

The process of washing after parquet repair will entirely depend on the nature of the contamination. If these are water-soluble materials, such as dirt, putty, whitewash, etc. Then you can deal with it using plain water with the addition of detergent. In this case, no serious action will be required. Parquet tolerates wet cleaning very well, so you don’t have to worry about damaging it.

During repairs, substances such as paint, glue, etc. may get onto the parquet. They are resistant to water, and in order to remove such stains, you need to try hard. You will have to use solvents. You should be very careful here, because some of them can damage the varnish layer and seriously damage the parquet. Therefore, it is necessary to choose substances that have only mild compositions. White spirit, methyl alcohol or kerosene are suitable for this. You need to pour a little product onto the stain and rub it well. It is best to do this with fresh paint that has not had time to dry. Such stains can also be cleaned with products designed to care for stoves. In order not to spoil the coating, it is better to first check how a particular substance will affect it, on an inconspicuous piece in the corner. Then everything will be preserved in its original form.

Regardless of how dirty the parquet is, it should never be rubbed with rough brushes or metal scrapers. This can only scratch the coating, thereby ruining it. In addition, you should remember that you do not need to wet it too much. Also, when cleaning, do not use cleaning products that contain abrasive particles or strong solvents. They will also have a negative impact on the parquet.

Cleaning laminate floors

Whitespirit is an ideal cleaning agent for laminate flooring after renovation.

No matter how carefully builders try to carry out repair work, even stains and dirt remain on laminate floors. Not all remedies will help in this case to cope with the problem. If paint gets on the laminate and small stains remain, it is best to use white spirit. It will most gently help remove this kind of contamination. In this case, you can also use auto chemicals, which serve as a means for removing bitumen stains. It is necessary to wipe off the paint only with a soft cloth, which will not damage the top protective layer of the laminate. It is simply unacceptable to use abrasive products here.

If there are black marks left on the laminate from shoes that cannot be washed off with plain water, you can wipe them off with a regular eraser. In addition, polyurethane foam may end up on the floor after repairs. The drug Dimexide, which is sold at the pharmacy, will help remove it. It is applied to the stain and left for a while, and then carefully removed with a spatula and sponge. This must be done with extreme caution. After removing all dirty and stubborn stains, all that remains is to wash the floor. To do this, you can use special laminate cleaning products and a well-wrung out cloth. In this case, there will be no divorces.

We wash linoleum after repair

Linoleum must be washed with clean water. In addition, it should be warm. After repairs, very unpleasant traces of dust, dirt, shoe prints, etc. remain on the linoleum. You can finally get rid of them only if you constantly change the cleaning cloth. Otherwise, there will be stains on the floor that will be difficult to get rid of. You can add soap to the water, but under no circumstances should you use soda, as many housewives do. It can have a negative effect on the surface, which will subsequently lead to their rapid burnout.

If the stains cannot be removed with such wet cleaning, you can use turpentine. It removes many types of dirt well. For larger stains, you can try scrubbing with damp chalk powder. If after cleaning there are still matte stains, they must be rubbed with mastic. It is sold in construction stores and will do its job perfectly. In addition to the fact that the stains will not be visible, the linoleum will acquire its original shine. Linseed oil, which is specially used to lubricate such floor coverings, is also suitable for this purpose.

Thus, it is quite possible to cope with stains of various origins.

Any floor covering can be washed without damaging it if you know what to use for it.

Of course, in order to avoid having to use strong means and rack your brains over what to do, it is best to simply cover the floor with something while the repair work is being carried out.

Apartment renovation is worse than a nuclear war. This expression occurs in the conversations of people who have started a major renovation of their apartment, deciding to change the wallpaper, update the ceilings, fix the plumbing and other things. Indeed, even at the final stage of the renovation, when everything has already been pasted over/painted/whitewashed, there are still a lot of little things that will require you to spend both time and effort. This type of work also includes cleaning the house. How to clean floors after renovation from white deposits? This question is asked by those who have decided to resort to one of the old but reliable methods of finishing the ceiling - whitewashing.

Cleaning up after renovation is not an easy task. Fine and nasty dust generated as a result of construction work will have to be raked out from everywhere in large quantities. It gets clogged up in upholstered furniture, settles on cabinets, and sometimes gets clogged up in the most inaccessible places.

Important! Fine construction dust has a negative impact on human health. It settles in the respiratory system and often causes the development of respiratory diseases. Coughing and pain in the lungs are common companions for those who do repairs and do not follow safety precautions, that is, do not use personal protective equipment.

That is why it is important to remove as much debris and dust as possible after completing the repair. And also, before starting this large-scale operation, it is recommended to make some preparations that will protect the interior from dust and whitewash.

It is advisable not to leave anything in the room where the work will be carried out - all the furniture is taken out, it is best to pack things in boxes or bags so that dust does not penetrate to them even through small cracks. It is recommended to wrap the furniture itself with plastic film, because even if it is standing in another room, it will be “attacked” by the smallest particles of building mixtures. It is recommended to wrap anything that cannot be taken out with cling film, as it will not allow dust to get to the interior item.

If a procedure such as whitewashing a ceiling is being carried out, and there is already a new floor covering on the floor or it is not being replaced at all, since it will be used further, then the floors need to be protected as much as possible. To do this, the base is covered with a thick film, which is then fixed along the baseboards using masking tape.

Important! If you neglect fixation, the film will become crumpled and will be of no use. It is also important to seal all joints of individual panels with tape.

Some people use regular old newspapers instead of film, but this method is not the most reliable. When wet, paper loses its strength and tears easily. To maximize the safety of the base, it is recommended to lay newspapers in at least two layers. It is not recommended to use a cloth to cover the surface, as it will still allow all the fine dust to pass through.

It is worth remembering that it is easier to prevent contamination, and especially whitewash, than to later wash off all the consequences of your negligence. Sometimes some coatings become hopelessly damaged when exposed to white dust.

Features of whitewashing as a finishing material

Whitewashing is one of the cheapest and most affordable options for finishing the ceiling, and it is also time-tested. Despite the fact that now this technology has been partially replaced by more modern design methods, it is still in demand, and all thanks to its special advantages:

• accessibility and low cost of the method;
• the ability to do the work with your own hands without the involvement of craftsmen;
• environmental friendliness and purity of the materials used;
• strength, reliability, stability of the applied decorative layer;
• a classic design option for a regular white ceiling.

Whitewashing can be done either with chalk or lime - these materials are available and always on sale, and are inexpensive.

Advice! If the ceiling has previously been whitewashed, it is recommended to use the same material that was used previously to update the layer. That is, if the upper part of the room was covered with lime, then it is important to use a lime composition.

Whitewash is precisely the material that most often leaves a white coating on the floor surface after repairs. It is sometimes very difficult to wash off, especially if it ends up in the wrong place, for example, on the floor. And during repairs, it is unlikely that it will be possible to completely avoid contamination of the base, even if you cover the entire room with film. The fact is that the protective coating can be easily damaged and all the dirt will fall onto the floor through the resulting hole. It is unlikely that anyone will pay attention to a small hole in polyethylene and immediately repair it during the work process. That is why, when deciding to whitewash the ceiling, it is worth finding out how the process of washing the floors takes place.

In general, cleaning the floor after finishing renovation work is not much different from regular cleaning. But it is often necessary to use special solutions or components to deal with white spots on the base. Before we talk about floor cleaning products, we will share a few useful tips for cleaning the base:

• You can't use baking soda to clean linoleum.– its impact will have a bad effect on the appearance of the coating;
• It is best to remove paint and other similar liquids from the coating immediately– then it will be more difficult to wash them. The same goes for whitewash stains;
• laminate and other similar coatings should not be rubbed with abrasive materials– the top protective layer can be damaged;

• Potassium permanganate cannot be used to treat varnished surfaces– stains will appear on the floor;
• It is best to wash all stains after the initial treatment of the floor– sweeping and wet cleaning;
• It is better to start washing the floors from the wall farthest from the door, moving towards the exit so as not to trample on the newly washed surface;
• It is recommended to change the water as often as possible when washing floors after repairs– this way you will be able to quickly deal with corrosive stains and avoid stains, which especially often appear during whitewashing.

How to clean the floor after whitewashing?

To remove white deposits from the floor, you will have to be patient and purchase several products that make the job easier. You will also need plain water, a couple of rags, and a mop.

Methods for removing white deposits and stains from the floor differ depending on the type of floor covering. Let's take a closer look at each option.

How to clean parquet after renovation?

– the coating, although reliable, is very delicate. It does not like to come into contact with water - due to its exposure, the coating loses its beautiful and noble appearance and may swell. That is why it is not recommended to wet it abundantly. Let's look at the easiest way to remove whitewash and white deposits from parquet.

Table. Means for combating whitewash on parquet.

Important! Parquet does not like the effects of aggressive chemicals, so you can only work on it with soft compounds. This can be methyl alcohol, white spirit, kerosene. But still, before using them, it is better to check on an inconspicuous area of ​​the parquet how the material will react to contact with the chosen product.

Parquet should not be rubbed with coarse abrasive materials. Neither metal brushes nor rough scrapers are suitable for processing it. They will simply ruin the coating by scratching the protective top layer.

How to remove whitewash from laminate flooring?

Laminate is a coating that, like parquet, really does not like water. Excessive moisture will negatively affect this type of coating, so you cannot use large quantities of water for washing. Although in general, this type of finishing material for finishing the floor is quite durable and reliable. But you still need to clean it carefully, otherwise you can damage the outer protective layer. And without it, the material will become susceptible to all types of mechanical and physical stress, as a result of which its service life will be dramatically reduced.

A vinegar solution of 1 - tbsp will help with whitewash stains on laminate flooring. l. dissolves in a 5 liter bucket of water. After this, a soft cloth (preferably microfiber) is moistened with the resulting solution and wrung out thoroughly - no liquid should flow from it. The floors are then treated with a damp cloth. The final stage is washing the laminate with plain water.

Important! The rag should be rinsed in a vinegar solution as often as possible. The cleaner it is, the easier it will be to remove dirt.

Just like parquet, laminate can be treated with vegetable oil. It is diluted in warm water in a ratio of 1:100. After treating the laminate with this composition, it is wiped with vinegar diluted in water (2 tablespoons per 5-liter bucket).

On a note! Vinegar can be replaced with citric acid.

Another remedy for removing white plaque from laminate flooring is a solution of ordinary table salt. The main thing is not to dilute it in water in large quantities, otherwise stains may remain on the floor. The optimal consumption is 0.5 cups of salt per bucket of water. After treating with this composition, the floor is wiped with a clean hoe moistened with plain water.

Linoleum is a less capricious material than parquet or laminate, but it also deserves careful care and handling. For example, you should never rub it with a hard brush - it can be damaged. But whitewash stains from such a coating are easiest to remove.

Linoleum is not afraid of water, so any white stains and deposits can be washed off with a well-moistened cloth. The main thing is that the water is clean and warm. It is always better to rinse the cloth thoroughly with water to avoid streaks. It’s even better to change the water in the bucket with fresh water as often as possible.

If stains from linoleum cannot be wiped off with water and a rag, then you can use a little turpentine or add laundry soap to a bucket of water. Perhaps the last option is the best.

Removes whitewash stains from linoleum and salt well. It is used in exactly the same way as with laminate.

It is worth remembering that you should not try to clean linoleum with gasoline, ammonia and similar compounds. Due to such improper processing, the coating will quickly fade.

Ceramic tiles are a material that has, one might say, been proven over the centuries. It has been used in construction and decoration for many years and has won the love of craftsmen for good reason. It is durable, reliable, resistant to moisture and practically does not react to chemicals, remaining inert. That is why it is so often used for finishing floors, especially in the bathroom, kitchen, toilet - that is, where the humidity is always high and the floors are treated using various chemical compounds.

It will not be difficult to wash off the white coating from such a coating - you can use absolutely any of the above methods, since they will not cause harm to the tiles. The tiles can also be washed with any amount of water.

How to clean the floor after renovation

Step 1. It is recommended to clear the floor surface of foreign objects before starting cleaning. Interior items are removed (it is recommended to completely remove them from the room), film and newspapers that protected it from dirt but were damaged, as well as all construction waste. Before cleaning, it is recommended to clean the things in the room before washing the floor. Otherwise, the surface of the floor covering will have to be washed again.

Step 2. Large debris is removed from the floor surface - the floors can be swept with a broom or brush. If you don't sweep the floors first, cleaning will be quite a difficult task.

Step 3. 5 liters of water are poured into the bucket. It should be warm or cool, depending on the type of flooring. However, you should not use hot water - rinsing a rag or mop in it will be uncomfortable. Next, the agent selected from the above is added to the water.

Step 4. The mop is well wetted in the prepared solution. Excess water is squeezed out.

Step 5. The floor is mopped. Visually, it can be divided into several sectors and each section can be washed separately. Corners, joints near walls and heavily soiled areas are washed especially thoroughly.

Step 6. It is important to rinse the rag as often as possible and change the water to fresh water. This will reduce the risk of divorce. Also, after treating the floor with a detergent, it is recommended to rinse its surface with clean water.

Video - Cleaning the floor after renovation

Prices for popular cleaning products

FLAT Linoleum cleaner

Video - How to remove grout from tiles

Cleaning after renovation is a rather complicated and time-consuming procedure. But with the use of various compounds and folk remedies, things will go faster. And if you choose the right method, then the white plaque can be removed without difficulty.