How to connect cable internet to a laptop. How to set up wired Internet

Good mood to you all! In this publication we will talk about how set up internet on your computer via cable. Moreover, friends, once upon a time, this topic was already discussed on this blog.

But since a lot of water has passed under the bridge since then, and Windows 10 is widely used on new computers, there was an urgent need to update the information. Although, to be honest, nothing much has changed in this matter.

So, since unlimited technology is advancing by leaps and bounds across the expanses of our vast homeland, within the framework of this publication we will consider connecting via a modem that is configured in router mode.

Therefore, if someone else does not know where to plug in the network cable correctly or why you need the login and password that you were given at the subscriber point, be sure to read the following material:

After the computer is connected to a properly configured modem using a cable, there is little work left to do. You just need to configure the network card. This is done very simply, there will be no problems.

In the future, everything will be shown using Win 10 as an example, although in previous versions of this operating system everything is done by analogy. So, let's get started. Right-click on the “Start” button, and then select the “Network Connections” section:

A window will open in which you need to select a wired connection, because we are connecting via cable. It is usually called “Ethernet” or “Local Area Connection”:

Now right-click on it again and go to “Properties”. At the next stage, you need to select “IP version 4” and click the “Properties” button at the bottom:

1. IP Address: When using dynamic IP, this is any value in the range from 192.168.1.2 to 192.168.1.254. If you have a permanent IP address, you should specify it;
2. Subnet mask: determined automatically, do not touch anything;
3. Default gateway: you should specify the IP address of the modem, which distributes the Internet to the computer via a cable.

After that, go to the item “Use the following DNS server addresses.” Here you need to specify the values ​​that are recommended. If you don’t know them, you can use universal ones. Here they are:

At this point, it is important to understand the fact that it is thanks to these addresses that sites open in the computer browser. Therefore, they can be used to block certain resources. Look at the third row of the table above.

In short, after all the manipulations, click the “OK” button and begin to enjoy the Internet. If suddenly the sites still do not load, then it is strongly recommended to check the settings again, and then study this article:

And with this, the article on how to set up the Internet on a computer via cable has come to an end. If you have questions, be sure to ask them in the comments. And at the end, watch an interesting video about Russian people on the Internet.

As you know, a computer without access to the World Wide Web is not of particular interest. Almost everyone needs the Internet, but not everyone knows how to set it up. The procedure for connecting a laptop to the Internet is practically no different from a similar operation on a desktop PC. There are only a few methods that will be discussed in detail.

Connecting a laptop to wired Internet

1. In the control panel, go to the “Network and Internet” tab.

2. Select “Manage networks...”.

3. Click the “Set up a new connection...” button.

4. Select “New connection”, then click on the 2nd option.

5. Now you will need to enter the information provided by the provider (login, password). Here you can set a name and attempt to connect. If everything is configured correctly, then the Internet should appear on the laptop.

Connecting a laptop to Wi-fi

Procedure:
1. Activate the wireless module on the laptop.
2. Open the “Network Connections” tab in the control panel.
3. Now you need to find a wireless connection and activate it through the menu (the “Enable” item).
4. All that remains is to select a specific point from the list and try to connect with it.

If you previously set an access password, you need to enter it. If the network is open, then you do not need to enter anything. However, you should definitely set up a combination to secure the connection so that no one can connect to it.

Connecting to the Internet using a modem

1. Go to the control panel, find “Network Center...”.

2. You need to “Set up a new connection”, then click on “Internet Connection”.

3. A list of three options will appear, you need to click “Dial-up”.

4. Now you need to enter the information that was provided by your service provider and complete the setup process.

Setting up a connection on a laptop is very simple, but you must first decide on the connection method. It is very convenient to use a Wi-Fi router, as you can connect not only a computer, but also a smartphone.

Having the Internet on your computer is no longer a luxury, but a necessity. For many, the World Wide Web is study and work, cinema and gaming, communication and storage of important files. Therefore, the question of how to connect the Internet via a computer is very relevant for all users.

If you do not yet have access to the World Wide Web, it’s time to think about it and first find out how to connect your computer to the Internet in Yekaterinburg. Deciding on is the first thing to do. There are a lot of options: cable networks, satellite communications, mobile networks or telephone lines. It all depends on the technical capabilities and desires of the user.

Not very convenient, but quite simple and available is the option of high-speed connection through a cable stretched into the room, which is connected to a network card. The setup depends on the provider and the technologies they use. Most often, authorization is required.

For an internal network connecting home or office stations, the optimal solution would be to connect the Internet via cable and router. This method easily and simply connects several computers, providing the opportunity for everyone to access the Internet and freely exchange information between them.

Connecting the Internet to two computers via cable, modem or router

The above describes how to connect your computer to the Internet. But it often happens that there are other devices that need access to the global network. It is inconvenient to constantly re-plug the cable or cord from the modem. In addition, sometimes you need network access from all devices simultaneously. So let's see how to connect two computers to the Internet. There are three options for making such a connection.

• First option. The second computer is connected to the World Wide Web via a modem using a wire. The modem connected to your chosen provider must be configured correctly. A network cable is pulled from the modem to the computer and inserted into any free Lan socket. If the system does not detect the modem and the Internet connection is not established, you may need to update your computer's network card driver. You can find drivers on the Internet or on the disk that came with your computer. This is one of the simplest methods, but it requires laying additional wires throughout the apartment, which is not always suitable for users.
• Second option. We connect the computer to the global network using a router and a Wi-Fi network. Connecting a second machine to the Internet in this way requires a router that distributes Wi-Fi. It is connected to the provider’s modem or cable, and the second computer receives the Internet via Wi-Fi. A stationary machine will require an adapter, internal or external.
• Third option. The second machine is connected through the main computer using a cable or Wi-Fi. In this case, you will have to purchase a Wi-Fi module that connects to the first computer. A wireless network is created through which Internet traffic is distributed to a second computer. Alternatively, it is possible to connect computers by wire. In this case, a local network is formed, where the first computer acts as a server that distributes information from the Internet.

It's up to you to decide how to connect two computers via the Internet. Much depends on technical and financial capabilities, on the location of computers, on the number of devices that will connect to the Internet.

Laptop owners need an Internet connection to their laptop. A laptop without the Internet loses more than half of its advantages over desktop computers. In addition, a laptop without the Internet does not have the full functionality provided by the manufacturer. How to connect the Internet to a laptop so that you can access the World Wide Web everywhere and always? What connection methods are there? What are the advantages of wired and wireless Internet?

Connecting a laptop to the Internet via Wi-Fi

Today, Wi-Fi is one of the most accessible and widespread methods of connecting to the network. All modern laptops are equipped with wireless network adapters, and public places and service facilities give visitors the opportunity to connect to a Wi-Fi network for free. If your laptop has a Wi-Fi adapter, then the sequence of steps to connect to the Internet is very simple:

1. activate the Wi-Fi module;
2. Go to “Start” - “Connection” or “Control Panel” - “Network and Sharing Center”.
3. Select from the available connections “Wireless network connection”
4. We decide on the Wi-Fi network we want to connect to. If the network is protected, then specify the network password.

We wait a few minutes until the computer connects to the network. Voila, we have wireless internet available.

If your laptop is old and does not have a Wi-Fi network adapter, you can buy an external wireless network card that plugs into the USB port.

Connecting the Internet to a laptop using a USB modem

To access the network in rural areas, outside the city, in places where there is no Wi-Fi, a very popular way is to use 3G modems connected to the USB port of a computer or laptop.

Such a connection is possible if there is network coverage from the provider. Many operators offer promotional USB 3G modems with Internet access. The connection procedure may vary depending on your service provider. Some providers provide free settings with access to the user's personal account. In some cases, the modem contains special programs for connecting to the Internet. In most cases, the setup and connection procedure is as follows:

1. We insert the USB modem into the laptop connector.
2. Launch the software installation program. Or a browser will automatically open with a window indicating the connection status.
3. Launch the installed program and click the “Connect” button (if necessary, specify your login and password).

We use the Internet on a laptop.

Network connection of a laptop using a cable

All laptops, without exception, are equipped with network adapters with an RJ-45 connector. This is a standard that has been used in computer networks for more than 10 years. A wired connection provides significantly higher Internet access speeds compared to wireless connections. This connection is no different from connecting a desktop PC. The operating system will automatically detect the local network.

With one click of the mouse, a connection is created (if necessary, enter your login and password). The settings for the IP address, gateway, and DNS servers will either be determined automatically or will need to be set manually (depending on the recommendations of the provider).

Connecting a laptop to the Internet using a computer connected to the Internet

This is an alternative to the usual connections if you do not have a wireless router or the opportunity to buy a USB modem. In this case, the computer acts as a modem or distributes the Internet.

Method 1. Wired connection of the laptop to the computer. The provider's cable is connected to the network card of 1 computer. The second network card of the computer is connected by a cable to the network adapter of the laptop. In your computer’s network connection settings, check the box next to “Allow other network users to use this computer’s Internet connection.” In this case, your computer acts as a router or modem and must be turned on for the Internet to work on the laptop.

Method 2. Connect wired Internet to the computer, and distribute the Internet to the laptop via the computer’s Wi-Fi adapter. This does not require an additional network cable and the laptop does not lose its mobility.

In order to connect to wired Internet you need to do the following:

Go to “Start – Control Panel”.

Then “Network and Sharing Center”.

In the window that opens, find the item “Change network settings”.

In it, select the “Set up a new connection or network” section.

In the next step, you must choose how to connect, select “High-speed with PPPoE”.

On the page for setting up a new connection, you need to enter the information that your Internet provider should have provided you with, namely your login and access password. If the provider has provided you with such data, then you must enter this data in the appropriate fields. You can also specify the name of the new connection in the “Connection name” field. After this, you can try to connect to the Internet by clicking on the “Connect” button.

kompogolik.ru

Connecting a laptop to the Internet via cable

A laptop is often used as a home computer, as a result of which the problem of access to inexpensive Internet, which also has high speed, is relevant for it. These qualities today are more closely matched by an Ethernet connection, so below we will tell you how to make the correct Internet settings on a laptop.

Ways to connect a laptop to the Internet

There are several ways to connect your laptop to wired Internet:

• via a USB modem, which is convenient, for example, in the country, but such a connection often does not provide sufficient speed and usually costs more;
• using Wi-Fi if there is an access point, for example, when a Wi-Fi router can be connected to a desktop computer with the Internet;
• This can be done via a wired Ethernet network, which provides the highest speed, connection to which will be discussed later.

Cable Internet for a laptop is the fastest, but also the most inconvenient, since in fact it can turn a mobile computer into a stationary one. At the dacha, for example, it is better to turn on a simple USB modem. A Wi-Fi router is very useful for use in an apartment.

Preparing for cable internet connection

To set up an Ethernet connection, first connect the network cable to your laptop. You can also connect a router to it, which, after configuration, will be able to distribute Wi-Fi to any other devices, providing fairly decent speed.

The twisted pair wire is laid from the switch in the entrance to the place where you plan to make an access point to the Network. Using a special tool, a plug with an RJ-45 connector is mounted on the cable, which must be plugged into the corresponding socket on the panel on the side of your laptop.

Connecting to the Network will not be possible without the necessary drivers for the network card. To check that they are installed correctly, do the following:

1. windows XP. Go to the control panel by clicking “Start”, select the network connections section.
2. For windows 7 and older versions. Go from the control window to the network and sharing settings section, then select the option to change settings for the adapter.

If the window that opens is empty, the driver is probably not installed.

General rules for connecting high-speed Internet

The data required for connection is specified in a special agreement. If you want to turn on the router, you will need to make other settings described in the specifications for the device. If automatic network detection does not occur, you will have to configure the TCP/IP protocol yourself.

In Windows 7 and 8, the connection is made in the following order:

In Windows 10, the connection is made as follows:

1. From the Settings section of the Start menu, go to Network and Internet.
2. Next, you will need to open the adapter settings settings.
3. Next, follow all steps, starting from 3, described for Windows 7 and 8 systems.

No further actions are required - the connection should work at full speed automatically. If you connect via a router, the procedure may vary for different providers, so to set up the Internet, first find out the full information on the corporate website of the provider providing this service.

Alternative Internet for a summer residence

Note that in a country house where it is not possible to connect to the Internet via cable, the best choice would be to use a USB modem. As a rule, there are no problems with its connection:

1. Insert a SIM card into the modem, then connect the device to the laptop;
2. The system will detect a new device and offer to install a program that allows you to use a modem on your device;
3. You may then have to enter the PIN code indicated on the card, after which the modem will automatically connect the laptop to the Internet.

In a word, you can connect to the Internet, which would have high speed even in the country, through a cable or router, and the procedure for setting up the connection can sometimes differ slightly.

LookForNotebook.ru

How to properly connect wired Internet to a laptop

Nowadays it is already difficult to find the owner of a laptop that is not connected to the Internet. Despite the increasing development and spread of communications via Wi-Fi connections, access to the Internet via cable attracts with its undeniable advantages, since it is more reliable and at the same time the lowest cost. Below are detailed guides on how to properly connect stable wired Internet to your laptop, as well as how to set it up for subsequent work.

Connection procedure

There are 2 connection types:

1. Wirelessly
2. Via a network cable.

The settings process after connecting via a network cable differs slightly depending on the version of Windows running on the PC. But the procedure itself is very simple, since you only need to insert the cord from the provider into the socket of the laptop’s network card. All laptops have a connector on the side of the case.

You need to install a wire coming from the distribution device installed in the house into the connector.

Preliminary activities

But if the user has a question about how to connect the Internet to a laptop, then first they need to decide on the choice of provider. To do this, it is recommended to analyze the following conditions:

1. Possibility of cable connection to the system of the communication service provider;
2. Price for services provided;
3. Providing by the provider a data transfer speed that is acceptable to the subscriber’s requirements at an optimal cost;
4. Availability and speed of response of the provider’s technical support service;
5. Additional criteria (promotions, special discounts, etc.).

Next, in order to connect to the wired Internet, you need to fill out an application on the official resource of the selected provider or by phone. Also, if possible, it is recommended to simply personally visit a nearby office of the communication service provider to draw up an agreement.

Setup procedure

Simply connecting the PC to the cable is not enough, because you also need to set up the Internet. First, let's look at the entire setup process step by step using the example of a laptop with Windows 7 installed.

Windows XP

In the case when a user solves the problem of how to connect a laptop to the Internet on which good old Windows XP is installed, then only a few steps should be taken:

1. Through “Start” open “Control Panel”;
2. Next, go to the “Network Connections” section;
3. Then right-click on “Local Network Connection”, click on the “Properties” line;
4. Click once on the line “Internet Protocol (TCP/IP)” and then click “Properties”;
5. Next, in the window that appears, select the “Use the following IP” item, indicate the data specified in the subscriber’s agreement with the provider;
6. Ready! Internet configured.

Windows 8

The following sequential steps must be performed:

1. Log in to the “Control Panel”;
2. Go to the “Network and Internet” section;
3. Next, open “Network and Sharing Center”;
4. Check the box “Set up a new connection.” or networks";
5. Specify the “Internet Connection” section, click “Next”;
6. Then it is recommended to install “High-speed (with PPPoE)”;
7. Type the name and access code specified in the agreement with the service provider, and check the “Remember this password” option;
8. Click “Connect”.

Note: after entering the parameters, sometimes you need to restart the laptop for correct operation.

nastrojkin.ru

How to set up an Internet connection on Windows 7

A computer or laptop running Windows 7, of course, can work without Internet access, but in this case its functionality will not be used to its full potential. In addition, the World Wide Web in its current state is the main supplier of information, software, entertainment content, etc. Therefore, the question of how to set up the Internet on Windows 7 requires a comprehensive analysis and successful resolution.

Preparatory stage

Before you start creating an Internet connection, make sure your computer has all the necessary software and hardware.

1. Connect the network card if it is not integrated into the motherboard or is not previously installed as an extension. The same applies to other devices through which you want to establish a connection to the Internet (USB modem, router, etc.).
2. Install drivers for the connected equipment. Without software, devices will not work correctly. Drivers are usually supplied on a disk, but if there is no media, they can be found on the official website of the manufacturer of your network equipment.

Connection setup

The instructions below will cover the wired connection. If you want to create a wireless network at home, find out how to connect a router and configure its operating parameters correctly.

Be careful! The system will offer you several connection types and you will have to choose the right one depending on the type of equipment you are using.

When using a 3G modem, you usually do not need to create a new connection, since all the necessary software is installed automatically when you connect a network device to the USB port.

If you use wired Internet, which is delivered via a cable laid by your provider in your apartment, select the first type - “Internet Connection”.

In the next window, the wizard will ask you to choose which technology the connection will be used. Click on the "High Speed ​​(with PPPoE)" button. Below it says that for identification you will need the login and password provided to you by your provider. This data must be entered in the next window.

The name of the new connection is also indicated here, which can be anything.

If you specified everything correctly, the following window will appear on the screen:

Network card settings

In some cases, providers require users to specify the IP address and DNS server address in the connection properties. To meet these requirements:

If you see error message No. 651 when trying to connect to the Internet, check that the network card drivers are installed correctly.

Create a connection shortcut

The connection has been created and now you can use it to access the Internet or, for example, connect a remote desktop. Now, for convenience, let’s place a shortcut to the created connection on the desktop, so that immediately upon logging in you can connect to the Internet without launching the “Control Panel”.

A shortcut to your connection is available on your desktop - you can use it to access the World Wide Web.

mysettings.ru

How to connect wired Internet to a laptop?

In total, there are only two options for connecting to the global Internet network to your laptop: wireless method and via a network cable. Moreover, one procedure is very different from another based on the OS version. Now we will learn how to connect wired Internet to a laptop.

Let's start setting up

Before you start setting up, you must make sure that the network cable has been connected to the computer, the network card has all the necessary drivers, and the Internet provider has started providing Internet service.

Using the example of one of the most popular operating systems, Windows 7, the principle of connecting to the Internet will be considered. So, in order to become a member of the “global web”, you need to do the following:

The user should go to the “Control Panel”. This transition can be done from the Start menu.

We find the point that is responsible for the global network and enter it. Even on different versions of operating systems, this item looks approximately the same.

At this point, go to the “Network and Sharing Center”, where the main manipulations will take place.