Handmade bookshelves made of chipboard. DIY wooden bookcase. What to make shelves from

Bookshelves: drawings, photos. How to make bookshelves: step-by-step DIY

Modern bookshelves not only fulfill their intended purpose, but are also part of the interior, adding zest and emphasizing the design of the room.

You can make bookshelves with your own hands from scrap materials; you just need to use your imagination and have minimal skills in working with wood.

How to make bookshelves.

To make a wooden shelf you will need the following materials and tools:

• Chipboard, board or MDF.
• Fiberboard or plywood (if the shelf has a back wall).
• Furniture screws.
• Plastic plugs for furniture screws.
• Edge tape (if chipboard or MDF is used).
• Sandpaper.
• Drill with drill (the diameter of the drill is slightly smaller than the thickness of the screws).
• Knob key for furniture screws.
• Square, tape measure, pencil.
• Fine-toothed hacksaw.

Furniture screws, plugs and key.

Drawing of a bookshelf.

The photo shows several drawings of bookshelves.

Making a bookshelf step by step.

The first step is to make a sketch of the future bookshelf and make drawings. Next, the shelf manufacturing process is as follows:

According to the drawings, you need to cut the material; this can be done with an ordinary wood hacksaw with fine teeth. If boards are used as the material, then sawing them will not be difficult; if the shelves are made of chipboard or MDF, then sawing such material is much more difficult. Things will go faster if you cut with an electric jigsaw, but if you have never held a jigsaw in your hands, it will be quite difficult to saw off smoothly.

Using a tape measure and a square, we measure and mark the cutting lines with a pencil, sawing off strictly along the line. The ends of the cuts must be even.

When all the parts of the shelf are ready, you need to make holes in the side boards for fastening with furniture screws. From the ends of the side parts you need to measure a distance of half the thickness of the board and draw a line with a pencil.

Now you need to make marks on the lines for the holes, retreating 50 mm from the edges of the board for screws. We apply the ends of the boards to the joints, take a drill with a drill, the diameter of the drill should be slightly less than the thickness of the furniture screw, and make holes the length of the furniture screw. We attach the ends of the main boards and drill.

We assemble the shelves with furniture screws, screw in the screws with a multi-faceted wrench, and cover the screw heads with plastic covers to match the color of the wood.

If you used chipboard to make the shelves, then the edges need to be sealed with self-adhesive edge tape to match the color of the chipboard.

If you need to make a back wall for a bookshelf, you will need a piece of chipboard or thin plywood. You need to attach the shelf to a sheet of chipboard, outline the contours of the shelf, cut out the chipboard with a hacksaw and secure it to the shelf with small nails.

As you can see, making bookshelves with your own hands is not at all difficult, and with a creative approach you can make a truly exclusive thing for your interior.

The modern world with future technologies and high-speed Internet allows us to devote less and less time to such an important activity as reading books. If you consider yourself to be a fan of real paper publications, you have probably thought more than once about setting up a space where you could store all your books. And it’s much nicer when this shelf is created by you personally. Making a bookshelf with your own hands is a simple task, but it requires minimal tool skills. We will give you some tips on how you can create such a stand for your collection.

Where to begin

Many will say that the easiest way is to go and buy a ready-made book shelf for yourself. But this way you lose part of its exclusivity, because you yourself will become a designer. If you are immediately stumped when choosing a shape or color, answer yourself a few questions:

• what do you need the shelf for? To change the interior? To fit all your books? To list only books of a certain series or author? Or just to let your guests see the entire collection?
• How many “floors” will the book shelf have? Here you need to carefully consider the size of the floors and the thickness of the base itself.
• How many books do you plan to place on the shelf? The answer to this question determines the material from which you will create the shelf. After all, if you plan to pile a lot of publications on it, you need to create a solid foundation.
• Where will the shelf be attached? There are two options - against the wall or. Will you need additional accessories and mechanisms?
• And the last thing is the final design of the shelf. You've probably already imagined it more than once, so you can confidently make a choice.

As in any business, here you will need materials and tools. As for the source materials, it all depends on what kind of shelf you decide to make.

Fabric shelf

To have such a wall shelf in your apartment, you will need:

• a pair of small radius pipes (useful);
• mounting brackets;
• textile;
• seamstress tools.

First, sew the edges of the fabric using a sewing machine. Install brackets on the wall and attach pipes to them. All you have to do is roll the ends of the fabric into a ring, the diameter of which will be sufficient to thread the pipe into it. You put the fabric on the pipes and that’s it - the shelf is ready.

For such an unusual shelf you will need:

• thick rope or rope (several pieces of different lengths);
• wooden boards;
• fastenings with which installation will be carried out;
• drill, drill bits;
• paint, varnish or polish.

Take your boards that will later become wall shelves and make holes at equal distances from the edges. Secure a rope or thick rope to the ceiling, then thread the ends through the holes in the board. Fix the board temporarily and tie a knot under each hole. That's all. Make a few more and you will have original exclusive decorative elements.

Classic wooden shelf

Let's take a closer look at the process of creating a standard book shelf. To do this you will need:

• board (width - 20 cm, thickness - 2 cm);
• plywood (fibreboard, thickness - up to 5 mm);
• drill, drill bits;
• jigsaw (preferably electric);
• hacksaw;
• screwdriver, self-tapping screws;
• level or square;
• screws for furniture, plugs for them.

As you understand, instead of wooden boards, you can use any materials, such as chipboard or plastic.

Let's get started

First of all, clear your workspace of all unnecessary things. It is better that there is nothing left in the work area except tools and material.

Take the necessary measurements and sketch out a drawing of the future shelf. Try to be as accurate as possible in your calculations. After this, you can begin sawing the base material. Here you will need a jigsaw. If you are not sure that you will do everything correctly with your own hands, you can order such a service at places where wood is sold. If you decide, then use a square to outline the cut line. First, attach it to one side of the board and draw a perpendicular line to the opposite end. This procedure must be done on all sides of the board.

Make sure that the jigsaw or hacksaw moves strictly along the line, since this part will be the end of the shelf. Next, measure a distance from it equal to the height of the shelf - this will be its side wall. All cuts must be cleaned with sandpaper. This way you will eliminate their roughness and unevenness.

Next you need to make holes to attach the side boards to the base. To do this, measure a distance from the edge of the side board that is equal to half its thickness, step back 5 cm from the perpendicular edge and drill a through hole. Do the same on the other side. Use a drill bit that has a smaller diameter than the screws.

To determine the hole depth for the top and bottom bookshelves, subtract the thickness of the board from the length of the screw. Now measure the centers of the holes on these boards and follow the procedure. Next, it’s just a matter of small things - using a screwdriver, assemble all the parts of the shelf into one structure.

If you want to create a shelf with a back wall, use plywood or fiberboard for this. For aesthetic reasons, it is better to cover it from the inside with film or self-adhesive paper. You can install such a book shelf on the wall using self-tapping screws or small nails.

Treat your new shelf with mastic or varnish. Try making decoupage or craquelure. You can also decorate the shelf with doors. They are usually made of wood, plastic or glass. They will also protect books from moisture and dust.

After the first attempt, try to make a more complex shelf - a large multi-tiered, corner or asymmetrical shelf will become an original element of the interior of any room.

You should not buy into the low cost of modern chipboards. When they are created, toxic elements are used that are harmful to the human body. If you have no other choice, then treat the ends of the shelf with melamine edge. To do this, warm up the wood, apply an edge to it and run a hot iron over it. After this, excess parts of the edge can be easily removed with scissors or a knife. This way you will save yourself from the harmful effects of toxins, and the shelf will become more neat in appearance.

If you are making a book shelf in, choose only natural wood, as it is environmentally friendly. The finished design can be decorated with animal figures or cartoon characters. This process can be a great leisure time for you and your baby. Try decorating a shelf together. To do this, take cardboard, acrylic paints and double-sided tape.

From all of the above, we can conclude how to make a bookshelf with your own hands. To do this you only need to have imagination and desire. If you have ever tried to create such a shelf yourself, share your comments under this article.

Wall shelves are an excellent option for saving space, as well as an opportunity to add some zest to the room. On bookshelves you can store not only books, but also many different trinkets. Today, manufacturers offer a large variety of ready-made shelves, but if you want to create a unique interior, try making this piece of furniture yourself. In this article you will find ideas for bookshelves and learn how they can be made at minimal cost.

Bookshelf Ideas

Shelves made from ladders

Shelves made from old things

Country style interiors can be decorated with a shelf made from a wooden ladder. It can be mounted on the wall using hooks. This shelf will accommodate not only books, but also souvenirs.

Even corners in the room can be turned into convenient bookshelves. To do this you will have to buy chipboard and fastenings. For corner shelves you will need to cut out sectors that resemble a triangle with a rounded base. Such shelves are secured using corners, and you can make them of different sizes.

We hope these ideas give you some ideas how to make a bookshelf with your own hands. Now you can decorate the interior to your taste and emphasize its individuality.

Books can be compactly placed on shelves, where it is much more convenient to find and pull out the desired instance if necessary. As a rule, bookshelves for multi-tiered structures are made of wood or chipboard, but you can order all-metal structures or choose glass shelves - airy, transparent and seemingly weightless. When choosing a floor or wall model of a bookcase, it is advisable to take into account the interior design so that a row of shelves in several tiers fits harmoniously into the overall style.

The design of a wooden or glass shelving is based on a metal rod, to which brackets are attached for installing shelves on them. When assembled, the structure resembles a sail. It can be easily hung on the wall or mounted as a spacer between the floor and ceiling. There are very simple, but very functional models of bookcases for home use that you can quickly make and assemble with your own hands. Next you will find step-by-step master classes with photos and visual video lessons on making wooden (or chipboard, MDF) shelves and assembled on metal rods in several tiers for beautiful placement of books.

♦ STEP-BY-STEP MASTER CLASSES:

VERY A SIMPLE WAY TO MAKE A FLOOR OR WALL RACK FOR BOOKS FROM MDF WITH SHELVES-FRAMES .

HOW MAKE A FLOOR RACK WITH LEGS FROM WOODEN BOARDS.

LEARNING MAKING A MULTI-TIER ROW OF SHELVES FOR A HOME LIBRARY .

CLASSICAL OPTION OF A BOOK RACK MADE OF WOODEN BOARDS AND METAL TUBES .

Another new product is mobile metal shelving on wheels for the home. They can be easily and freely moved around the apartment, quickly installing where there is a need. This is very comfortable and multifunctional furniture. A home shelving unit can be used as a partition that divides a room into zones. You can place not only books on it, but also install equipment. Such mobile racks can have different shapes. For example, a round wheel cabinet was released, the frame of which is made of aluminum, and the other parts are made of transparent plastic. Shelves in mobile racks have a variety of shapes and colors. There are models with round, rectangular, curved shelves, as well as shelves in the form of drawers or boxes. These convenient multi-tiered structures are made of glass, metal, wood or plastic.

♦ OPTIONS FOR FLOOR AND WALL (HANGING) RACKS FOR BOOKS:

Many metal and wood corner book shelving designs include lighting. Small lamps can be inserted into the shelves, and the glass display cases will be lit from below or from above. Often the shelves are illuminated from behind, which creates an unusual fairy tale effect in the room.

Furniture manufacturers have taken into account the interests of book and periodical lovers. For them, special shelves covering the entire wall are produced, on the shelves of which it is possible to place the entire home library.

Multi-tier systems with shelves of different sizes, developed by the Italian designer Bianchi, are particularly convenient and highly practical. These metal racks can be successfully placed in the corners of rooms. Bedside tables and wardrobes fit easily into the corner of the living space, since the only component of this furniture is a front panel with a revolving door. The lightweight structure can be mounted on walls that form a corner, which will also serve as cabinet walls.

Another interesting detail of such a cabinet or bedside table: the outer side of the door can be made internal, and vice versa. If necessary, it can be left in a position where both sides are visible. Such furniture will be especially convenient in the hallway, as it can be used as a hanger. In the bedroom
it will serve as a chest of drawers, and in the office as furniture that organizes the workplace. In addition, you can hide toys and bedding in closets. And a low cabinet can easily be turned into a bar or TV stand.

♦ VIDEO LESSONS

In a new review, the author has collected examples of racks and shelves that you can make with your own hands. They must, of course, be used for their intended purpose. Having looked at the photographs collected here, you can easily make sure that there is nothing fundamentally complicated in the proposed option.

1. Circle shaped

An original round shelf, the edging of which is made of thin fiberboard, and the shelves themselves are made of ordinary boards, painted white. Of course, this design is not suitable for storing the entire home library, but it can accommodate several educational books, a small indoor plant and a couple of framed photographs.

2. Wall shelf

3. Arrow

4. Practical and unusual

5. Charming shelving

6. Narrow slats

7. Stylish copper

8. Old pallet

9. Industrial style

10. Bright honeycomb

11. Stylish transformation

Drawers from an old discarded table can be used to create original shelves. Carefully painted and modified at your discretion, the drawers can be attached to the wall, both vertically and horizontally, and used to store a wide variety of things.

12. Rough design

13. Abundance of cells

A huge wall-length shelving unit made from a variety of wooden boxes painted in bright colors can be a stylish and budget-friendly alternative to a massive store-bought cabinet.

14. Wicker basket

MDF shelves.

17. Rustic style