Detailed instructions for assembling beds with a lifting mechanism, video tips from professionals. Detailed instructions for assembling beds with a lifting mechanism, video tips from professionals Assembling a Sherlock bed with a lifting mechanism

Free within the Moscow Ring Road for orders over 10,000 rubles, up to 3,000 - 800 rubles, up to 10,000 rubles. – 500 rub. Outside the Moscow Ring Road: up to 15 km - free, over 15 km (starting from the 1st kilometer of the Moscow Ring Road) - 30 rubles. / km. Furniture available in warehouse. Terms – 2-3 days. Pickup is not possible. Delivery to shopping center – 1000 rub. with obligatory lathing. Delivery on weekdays from 10.00 to 18.00. Evening delivery from 18.00 to 20.00 on weekdays and Saturday +1000 rub. to the basic delivery conditions. Manufacturer: Glazovskaya MF.

Lifting conditions

On the freight elevator - free, on the passenger elevator - 2% of the cost (at least 200 rubles), on hand - 0.8% of the cost per floor (at least 200 rubles).

Assembly conditions

Assembly cost - 10% of the order amount (excluding additional services), but not less than 1200 rubles. The cost of assembling a KITCHEN is 10% of the order amount (excluding additional services), but not less than 2000 rubles. The minimum travel fee for an assembler within the Moscow Ring Road is 1,200 rubles. Departure of the collector outside the Moscow Ring Road - 20 rubles. for each km, but not less than 200 rubles.

Have a comfortable and beautiful bed everyone dreams, but for small-sized housing it is difficult to choose a model that would simultaneously meet all these requirements. It is important to use rationally limited area rooms, so you should pay attention to the option with lifting mechanism. Self-assembly of a bed with a lifting mechanism according to the instructions in the video is a completely accessible process.

Availability comfortable bed allows a person to get enough sleep and regain strength before a new day. If the bedroom is no different large sizes, don't be upset. It is enough to choose a bed with a lifting mechanism, which is characterized by compact dimensions, high comfort and original design. Moreover, the cost of such furniture can vary, so you can choose an option to suit any budget. And to save even more, it’s worth analyzing how professionals assemble such structures and doing the same.

The assembly diagram of a bed with a lifting mechanism is quite simple, but first you should know the main advantages of such furniture. Products of this type provide a person with comfort during rest and sleep, but do not take up much free space in the room. The lifting mechanism is attached to a spacious box, inside of which you can store bed linen and bedspreads. Thus, with a small area you can solve the storage problem bedding. For these reasons, beds with a lifting mechanism are so popular among owners of small city apartments.

For self-assembly For such a design you will need the following tools and materials:

hardware;
screwdriver set, socket wrench, screwdriver;
wrench;
yardstick;
building level;
hammer;
a sheet of paper, a simple pencil.

Thus, the work will not require expensive equipment or rare tools, which greatly facilitates the preparatory stage.

Assembly steps

The entire assembly process consists of several important steps:

installation of the box and base;
fastening legs if necessary;
installation of corner ties;
installation of a lifting mechanism;
installation of a traverse;
installation of frame and mattress holders.

The instructions for assembling a bed with a lifting mechanism indicate all the work processes. At the first stage you will need:

extract all elements of the future design from packaging film, inspect them for defects. If one of the elements is defective, it will need to be replaced. A frame with cracks is unlikely to be reliable and safe for sleeping;
lay out the drawers according to their intended purpose on the floor, with the side with the holes facing up;

connect the drawers to each other using fasteners, and then hang the head of the bed on the box you assembled with your own hands;
for fixing individual elements You will need to use a screwdriver and screws to assemble the structure into a single whole.

Note that some models may use longitudinal strength elements. For example, solid longitudinal ties, as well as corners or brackets that are fixed to the frame with screws. It is important to take this into account during the work process.

Housing assembly

For ease of assembly, the Selena bed frame is made of semi-assembled blocks:
1 - Front part, 2 - Headboard, 3 - Left strip, 4 - Right strip, 5 - Crossbar, 6 - Longitudinal strip.

Installation of legs

The supports of the structure are fixed to the frame using special platforms located on the longitudinal elements themselves, or screwed separately onto the frames. Then shelves and corners are attached in the upper part of the drawers. Some bed models do not have free-standing supports, instead of which a solid side frame is used.

Experts insist that you should not tighten the screws right away, because in the future you will need to align the drawers, shelves, and corners in a perpendicular plane. The lifting mechanism is secured at the next stage of work.

Installation of corner ties

This process is performed after attaching the supports to the bed and is necessary to make the structure more reliable and stable. Each corner tie consists of 5 parts:

the screed itself;
2 footers;
2 countersunk bolts.

To work, you will need to use a 10 mm drill, screwdriver, hexagon or hammer. If it is necessary to disassemble the structure, the presence of a tie will allow you to easily disconnect the parts from one another.

Corner screed

Mounting the lifting mechanism

The next stage of work is to install and secure the lifting mechanism to the bed. It is extremely important not to make a mistake when placing it and determining the sides, because otherwise the smooth operation of the mechanism will be disrupted. To do this you will need:

fix the bed frame on the lifting mechanism. Use screws for these purposes. Before tightening the fastenings completely, be sure to even out the gaps between the frame and the base;
Clarify the required level of force to control the model. Installation of the unit into the lifting mechanism should be done with your own hands with the cylinder facing up, using nuts with a locking ring and fluoroplastic washers;
tighten the nuts until they stop, and then loosen the fastening slightly, leaving minimal play. The operation of the lifting mechanism should be checked several times.

Mounting the lifting mechanism

Installation of frame and mattress holders

It is worth installing comfortable-to-use handles on the bed frame for trouble-free control of the structure, as well as a mattress limiter. All work must be completed by installing the bottom of the bed and putting the cover on its perimeter.

If the base consists of lamellas (from 15 to 25 pieces depending on the model), they will need to be hammered into special holders with a hammer. Each lamella is fixed on both sides, so the process may take some time. Now you know how to assemble a bed with a lifting mechanism, so this task will not be difficult.

Installation of slats

Possible difficulties

Of course, professionals with extensive experience in assembling various types of furniture can easily handle assembling beds with a lifting mechanism. But beginners in this matter may encounter some difficulties, which can be found in the table.

Possible difficulties	Solution
Need for drilling holes	Holes for fasteners will need to be made in different parts designs. It is especially important to properly organize them in the headboard for its secure fixation on the frame. A screwdriver is required to create the holes, and the headboard is secured with screws.
Assembly and installation of gas lift	The installation process itself is quite complex, so the work must be done without haste, carefully, and consistently. It is important to maintain symmetry in work and adhere to safety measures.
Mistakes in marking the bed frame	An error at this stage will negate all efforts, so it is worth reading the assembly instructions from the manufacturer of this model in advance. You can also ask the opinion of experienced furniture makers.

Remember a few more important points.

Double lift bed - rational decision for a small apartment. The recommended mattress height is up to 23 cm, weight is up to 70 kg. The mattress “sinks” into the body of the bed by 7 cm. The upper shaped bar on the headboard is made of a thick laminated chipboard 7 cm wide.

This bed is equipped with a base with a lifting mechanism with improved gas springs. The distributed load on such a bed is 300 kg, taking into account the weight of the mattress. The base rests on a central frame made of laminated chipboard and metal brackets On the sides. HDFO sheets are placed loosely on the bottom of the box, protecting things from dust.

Attention: Until the mattress is placed on the base, it does not go down!

The bed frame is made of laminated chipboard 16 mm, 22 mm, PVC edge 0.45 mm. The bottom of the linen drawer is HDFO 3 mm. The head of the bed is framed with an MDF profile. MDF supports.

Colors:Sonoma Oak, Dark Anchor Ash

Size:(W*H*D) 1500*983*2120 mm

Base: orthopedic, with lifting mechanism

Material: laminated chipboard

Legs: MDF

Size sleeping place(mm): 1400*2000

Possible mattress height (mm): up to 230

300

Set contents:

The mattress is not included in the price of the bed and must be purchased separately.

Number of packages: 5

Weight, kg): 89