Painting a fur coat at home. How to dye natural fur at home

Unfortunately, even the most expensive products made from natural fur lose their original appeal over time due to simple wear and tear. However, it is still possible to restore them to their former attractiveness. And, by the way, for this it is absolutely not necessary to contact specialized dry cleaners and workshops. In this article we will look at everything about how to dye fur at home, what features this process contains, as well as the nuances, subtleties and features of work to restore lost color and shade on various furs.

It’s worth noting right away that despite the apparent ease and simplicity, the dyeing process requires maximum concentration of attention, because even the slightest mistake can render the item completely unusable. Moreover, before dyeing yellowed fur at home, you should take care to pre-prepare the product by cleaning it from dirt and dust, as well as carrying out a simple degreasing procedure. Ignoring this requirement may result in the paint not being distributed evenly and not being absorbed into the structure of the product, as a result of which various stains and unpleasant stains will remain on its surface.

Used for processing fur items an alkali solution containing:

Dishwashing liquid or washing powder - 1 tsp;
Ammonia - 5 grams;
Table salt – 15 grams;
Soda – 10 g.

This amount will be enough to prepare 1 liter of cleaning solution. The resulting liquid is applied to the fur area using a regular brush, after which it is washed off with warm running water. As an alternative to this recipe, you can use a mixture consisting of alcohol, vinegar and distilled water in equal proportions. On the reverse side, it is recommended to lubricate the skin of the product with a rich hand cream. This is done to prevent drying out.

An important point that you should pay attention to before dyeing fur at home with paint is the choice of dye. The structure of the pile in natural furs is similar to human hair, which is why ordinary hair dyes, which can be found in almost any store (including supermarkets), are suitable for coloring fur products. But it’s worth remembering that the quality of the final result depends on how durable the dye you choose is. It is worth noting that depending on the type and size of the product, you may need from 1 to 3 packages.

A small life hack: before starting the procedure, it is better to test the purchased paint on a small and barely noticeable piece of the product: this way you can make sure that you have chosen the right shade, and also make sure that the dye applies evenly to the material.

Raccoon fur

To ensure that dyeing raccoon fur at home does not cause problems or difficulties, you should familiarize yourself with the characteristics of the material. Compared to other furs, raccoon has a denser pile, which is why dyeing will take much more time. At the same time, the number of consumables also increases: practice shows that to uniformly paint one hat you may need 1.5-2 packs of paint.

The paint is applied evenly; for this you can use a brush, often included with the purchased product. The time specified in the instructions for use will be sufficient for the paint

“grabbed” and penetrated into the structure of the pile. At the end of the procedure, the product is washed under warm running water and hung to dry. ATTENTION! Do not use a hair dryer or other drying devices under any circumstances, as there is a possibility of damage to the product.

Astrakhan fur

Dyeing astrakhan fur at home does not require special knowledge, skills and abilities. Astrakhan fur can (and should) be dyed black. The paint is applied to damp pile and kneaded with hands to ensure even distribution, after which the product can be set aside for the time specified in the manufacturer’s instructions. After the period during which the paint should “set” has expired, the product is washed under warm running water, laid out on a flat, slightly inclined surface and, using simple manipulations, is cleaned of excess moisture. After complete drying, the pile is combed with a regular comb in the desired direction.

Rabbit fur

To prevent dyeing rabbit fur at home from leading to the “destruction” of your favorite item, you should remember several nuances. In particular:

The dye should be one tone darker than the original color of the item being dyed;
To evenly distribute the paint, in addition to standard cleaning procedures, the rabbit should be immersed in a solution of washing powder for fur with water heated to 30-35 degrees Celsius and kept in it for 1 hour, then rinsed under warm running water;
When performing the procedures directly, it is recommended to use the instructions included with the purchased paint.

Practice shows that the dyes “Henna”, “Basma” and “Gamma”, in which the main substance penetrates into the deep structure of the pile, are suitable for coloring rabbit fur. Drying occurs in the same way as previous products.

Fox fur

Due to the similar structure of the pile, dyeing fox fur at home is similar to that of a rabbit. Particular attention should be paid to the choice of shade: the most common mistake of people who take on the task of dyeing expensive furs on their own is failure to follow the rules for choosing the required tone. As last time, the substance should be a tone lower than the original color.

After the procedure, you can use the balm (included with the dye): it will give the product a special shine and silkiness. Dry naturally, without hair dryers, radiators or heaters. Preferably on a horizontal surface, securing the edges of the product with pins.

Mink fur

Contrary to the common misconception that dyeing mink fur at home is impossible, the dyeing procedure is no different from everything described above. However, it is important to remember that coloring of mink products is used purely to return them to their original appearance: when trying to change the color, you can get the most unexpected and, at times, quite frustrating results!

Sheepskin fur

Unlike previous methods, dyeing sheepskin at home is a little different. To distribute the paint evenly over the surface, the product is placed in a solution consisting of aniline dye and chemicals and heated at 40-50 degrees until the material acquires the desired color. But due to certain difficulties, this method is not very popular among ordinary people. Fortunately, nowadays people who want to dye sheepskin are offered an alternative in the form of aerosol dyes.

The process is carried out outdoors. Do not neglect personal protective equipment, because... in some cases, the coloring matter contains elements that can cause harm to human health (after drying, under the influence of UV rays, their harmful effects are neutralized).

Arctic fox fur

Dyeing Arctic fox fur at home takes place in several stages:

Pre-cleaning;
Applying paint with a brush;
Rinse under warm running water;
Drying.

It is important to remember that the product should be dried away from fans and heating appliances. It is strictly forbidden to use a hair dryer or other drying equipment: otherwise, the structure of the material may be damaged and you will have to contact specialists to restore it.

Silver fox fur

Dyeing silver fox fur at home is extremely rare: the thing is that products made from this material are resistant to wear and tear and are able to retain their color throughout the entire period of use. Another thing is yellowing, which occurs in 8 out of 10 cases. Dealing with it is quite easy. To do this, you can use both dry and wet methods. In the first case, a mixture of chalk powder, talc, semolina, starch or wheat flour is rubbed into the fur. Since the main cause of yellowing is the fat that accumulates on the surface of the fur, these substances help to effectively remove it.

In the second case, a wet solution of liquid soap and shampoo is applied to the surface of the item. 5 minutes is enough for the active ingredients to penetrate the hair structure and cleanse it of dirt and dust. The solution should be washed off carefully, without catching the inner layer (bottom layer). Before sending for drying, the fur should be combed with a fine-toothed comb.

Conclusion

Summarizing all of the above, you might think that dyeing natural furs is not as difficult as it might seem at first glance. However, if you doubt that you can do this yourself, it is better to trust the specialists: most companies engaged in such activities can guarantee a 100% effective result!

A fur product is purchased taking into account the fact that it will last for many years. Unfortunately, even expensive things can fade. The fur coat or vest itself is still in good condition, but its appearance leaves much to be desired. What to do with such a thing? A fur product that has lost its color should be dyed. That is why women need to figure out how to update their fur coat.

Having discovered their favorite fur coat without the original color, many ladies are very worried. Don't be upset, because the situation can be corrected, dyeing the fur. To cope with the task, you first need to decide on the color, and then on the painting method.

It is important to follow the painting instructions. If you don't do this, you can simply ruin your fur coat. In addition, it is worth remembering that before starting the painting process, the product is prepared.

Methods for dyeing fur

Modern means allow you to dye fur in any color.

Currently, there are four popular ways to dye a fur product, these include:

Namaz method. The method involves applying paint using a brush or a bunch of feathers. Excess paint is removed by centrifugation.
Fur gilding. A similar method involves bleaching the pile. It is best to use this method if you want to paint a raccoon, arctic fox, mink or fox.
Dipping method. This is the most common method of dyeing fur coats. The product is completely immersed in paint and remains in place until it is painted.
Combined method. In this way you can imitate the fur of a wild animal.

Regardless of the method chosen, the housewife must follow the instructions. Only consistent adherence to the steps will allow the product to be painted correctly.

You can create your own image

Coloring stages

Women who decide to dye a fur product should immediately understand that the dyeing process consists of several stages. If one of the steps is performed incorrectly or completely missed, the fur coat will not be painted accurately.

The painting process consists of preparation and painting. Each stage should be given special attention. Only in this case can we hope for a positive result.

Fur cleaning

Despite the fact that you can dye a fur product yourself, you cannot immediately proceed to the dyeing process. You must first prepare your fur coat.

To do this, the fur product is cleaned of contamination. This can be done using an alkaline solution. To prepare the solution, you need to mix 3 teaspoons of table salt, 1 teaspoon of dishwashing detergent, 2 teaspoons of baking soda, 1 teaspoon of ammonia solution with 1 liter. water. The resulting solution is applied to the fur product using brushes. After this, the product is washed and dried.

At the next stage of cleaning, it is necessary to process the inside of the fur. To do this, it is recommended to use glycerin or fatty cream. This treatment will protect the fur from drying out.

Coloring

Painting a fur product usually takes no more than 50 minutes. The owner just needs

Piece of art

decide on the method of painting the product. Some ladies prefer to dye their fur coats with hair dyes, while others prefer sprays for dyeing fur products. Each coloring method has its own characteristics.

Spray for painting fur

You can dye a fur product using a special spray. Thanks to this product, you can give color to long ends. The spray cannot stain the undercoat and undercoat.

When spraying, the can of paint must be kept at a distance of 65 centimeters from the fur coat. In this case, the can moves slowly, without sudden movements. If you make chaotic movements, the product will be painted unevenly. Immediately after dyeing, the fur is combed. This way, excess paint can be removed.

You can also use a simple aerosol can. This method may be cheaper, but more effective. It is also worth remembering that you do not need to paint the entire product, but only those places that have lost their original appearance.

The same case when both a fur coat and hair are dyed with hair dye

Paint for painting

The most popular way to dye fur is to use hair dyes. It should be noted that the dyeing process is carried out only on treated fur. When painting, you should pay attention to all layers of fur. Don't forget about the meat.

To distribute the paint evenly over the product, you need to knead the fur with your hands. The paint acts on the product for 40 minutes. After this, the fur must be held under running warm water. To consolidate the effect, the fur coat can be placed in a saline solution for 10 minutes. When the dyeing process is completed, the fur coat must be dried by laying it on a horizontal surface.

How to dye arctic fox fur at home

Some women are interested in the question of how to dye a fur coat at home if it is made from Arctic fox? Like any other fur, the Arctic fox must first be processed. It should be noted that it is better to paint the white Arctic fox in light colors. If desired, dark furs can be dyed in light colors, but then they will first need to be decolorize with hydrogen peroxide.

Before you start dyeing, you need to test the fur. To do this, a little paint is applied to the pile of the product. If nothing serious happens to it, you can start painting.

It is best to buy 2 more packs of paint. You should paint your fur coat with a brush, after wearing rubber gloves. After painting, warm water is poured onto the product. The last stage of painting is drying. The product is placed on a horizontal surface away from heating devices.

How to dye mink fur at home

Many women are interested in the question of how to dye mink fur? In fact, there is nothing complicated. To dye mink, you can use both hair dye and sprays. If paint is used, then it can be applied to the product with a brush or toothbrush. You can evenly distribute the paint with your hands. After 40 minutes, the paint must be washed off under the pressure of warm water.

Drying is carried out in the same way as when painting other things. A mink vest or fur coat is stretched on a horizontal surface, away from heating appliances. You can use a hair dryer for quick drying. However, remember that first of all, you should dye fur precisely in order to return the product to its original appearance, and not to change it.

The fur fades in the sun. Precipitation also affects its brightness. As a result, even the most expensive and high-quality fur coat begins to look shabby and old over time. Painting will help get rid of signs of wear.

First, clean the fur: comb it, remove dust and other small debris. If you do not do this, foreign particles will not allow the paint to lay down evenly. Then choose the product you will work with. Remember that even the most durable options will only maintain a given color for 1 season. By the time the next one begins, there will be no trace left of the painting.

How can you dye fur?

Most often, housewives turn to either professional dyes designed for use on fur products, or regular hair dye. The latter will have to be purchased in large quantities. Especially if the pile is long, thick, and the fur coat is not a shortened model.

Also It is definitely worth conducting a compatibility test. Apply the purchased dye to an inconspicuous area of fur. Follow the allotted time. Rinse it off. Wait a couple of days. If nothing bad happens to the item during this period and you are satisfied with the resulting shade, proceed with full-scale painting.

What is needed for the job?

List of items and materials that will be needed in the process:

salt, soda;
glycerin, ammonia;
specialized product for washing fur items;
water.

Self-painting algorithm

So, you need:

Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.

Important nuances

When applying, try to cover all areas, don't miss anything, but move quickly. Otherwise, one part of the product will be painted better than the other. This will happen due to the different duration of exposure to pigments. If you have problems with the speed of completing tasks or have no experience, you should resort to a spray gun. Just don't bring it too close to the item of clothing. You need to spray from a distance (about 50 cm).

Important! If you use specialized paint sold in cans, you should spray it from a distance of 60–70 cm.

After application is complete, let the paint sit for the required time. The waiting time depends on the active dyes, but usually the instructions say 30–45 minutes. After the allotted time has passed, rinse the fur coat in a vinegar solution and blot the pile with paper towels. This will remove any remaining paint.

Squeezing by hand, twisting, running sponges over the product or performing other manipulations aimed at speedy drying is prohibited. For this purpose, you can only use napkins.

The next step is optional, but recommended. Experienced housewives advise immediately after removing any remaining dye, apply a mask for colored hair to the undercoat. The best products are professional products that not only protect the color from being washed off, but also take care of the hair structure. Their effect will be noticeable within 2–5 minutes. After this time, rinse the clothes again.

How to dry it properly?

After all the work, the fur coat is placed on wide hangers that fit perfectly in size. It is also worth paying attention to what material the item is made of. Thin steel simply cannot withstand it and will bend from the weight of a damp fur coat, if it is, say, mink or sable fur. That is, there is no point in relying on the fact that the hanger has never been deformed under a fur item before, because up to this point the outerwear has always been dry.

Best option: durable wooden hangers. Place them together with a short fur coat in a warm room. Try to ensure that heating devices, if they are working, are as far away from the fur as possible. If you don’t have good hangers at hand, you can resort to another drying method.

Algorithm of actions:

let the water drain;
apply glycerin and set the direction of the pile, if necessary;
fold in half;
place on a hard, flat surface (fur should be on top);
place a well-absorbent cloth;
Periodically replace the absorbent cloth with a dry one.

At first you will have to do this every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.

If bald spots, deformation or other defects appear, immediately seek help from a dry cleaner. Perhaps the fur can still be saved.

Arctic fox fur products, just like diamonds, are girls' best friends. Spectacular arctic fox fur coats and coats, original vests are liked by all ladies without exception. They not only keep you warm in the harsh Russian winters, but also look royal.

Despite the fact that the wear resistance of the Arctic fox is very high, its color gradually loses its intensity. The colored Arctic fox becomes dull over time, and the white one turns yellow. The good news is that it is quite easy to restore the presentable appearance of arctic fox products by painting them. You can resort to the services of a studio, but it is much more economical to dye arctic fox fur at home.

Features of self-dying

Furriers believe that, unlike others, the fluffy and dense Arctic fox is the most practical to work with. The dyes apply smoothly and last a long time. The main thing is to strictly follow the instructions that we have compiled taking into account the recommendations of expert furriers.

Important nuance! Don't paint a new and expensive item at home just to get a different color. Paint products that you won’t mind if something happens: yellowed, faded, out of fashion, etc.

The process of updating the fur of the Arctic fox can be divided into several stages:

Preparation;
pre-cleaning;
painting;
consolidation;
drying.

Let's look at each stage in detail.

Preparation

If you want to dye a collar that is sewn onto a coat or jacket, you need to carefully tear it off and sew it in place after all the manipulations. The lining of fur hats needs to be removed.

As for fur coats, it is quite difficult to dye large items well at home. To do this, you will have to separate it into separate skins, and then sew it back together. If a fur coat is valuable to you, it is better not to take risks. As a last resort, use a tinting spray.

Arctic fox fur cleaning

Existing dirt and greasy deposits must be removed, as they interfere with high-quality, uniform coloring. If you neglect this advice, the color in contaminated areas will turn out paler. A solution made from a mixture of the following components will help you clean natural fur at home:

table salt - 2 tbsp. l.;
mild detergent - 1 tbsp. l.;
soda - 2 tbsp. l.;
a few drops of ammonia.

Combine all ingredients, dilute in two liters of warm water. Treat pre-combed fur with the resulting composition.

Apply it with a brush, trying to distribute it evenly over the entire surface. Make sure to clean both the top and bottom of the fur, including the undercoat. Then wipe the pile with a damp sponge several times to remove the alkaline solution.

Light stains can be easily removed by pet shampoo, which can be purchased at a veterinary store. Dilute it with warm water, apply it to the product with a damp sponge and carefully clean. Then rinse off the soap mixture with a clean sponge.

The skin from the underside of the fur is called mezdra. It should not be wetted at this stage to avoid deformation. Before cleaning, lubricate the inside with glycerin to prevent it from getting wet.

Cleaning can be done much faster with the help of professional cleaning sprays, for example, the FURASOL brand.

How to dye arctic fox fur at home?

It is correct to start dyeing immediately after cleaning, since the dye adheres more softly to wet fibers.

Choosing paint

Dyes for natural fur are sold in leather goods, hardware or fur stores. If it is difficult to purchase a special dye, we recommend using regular hair dye of the desired shade. At the same time, color possibilities expand almost unlimitedly.

The Arctic fox's fur is quite dense. To get a rich color, you will need at least two packs of paint.

The basic rule is that fur should be dyed several shades darker than the existing one. We advise fans of colored fur items to pay attention to the fashionable wine, dark blue palette of shades.

Experts note that such fur dyeing at home will last from 6 to 12 months. Therefore, after one or two seasons the process will have to be repeated.

Attempt at writing

If you want to dye arctic fox fur for the first time, then to ensure a guaranteed result, it is advisable to conduct a test. This can be done on a small piece or in an inconspicuous place, such as inside pockets or on the hem of a sleeve. Don't forget to protect your hands with rubber gloves.

If you are satisfied with the result, proceed to coloring the entire product. It is best to apply the coloring composition to the fur with a hairdressing brush. Distribute it, evenly coloring each strand. Exposure time may vary, follow package instructions.

Having analyzed the reviews of fans of fur dyeing at home, we can conclude that a stable result is obtained when using inexpensive hair dyes. Domestic coloring compositions are more variable in color range. Such paints provide a wide field for experimentation: you can hold them until the desired shade is achieved. Then the paint must be carefully washed off with water at a temperature of 30-40 °C.

Lock color

To fix the resulting shade, dilute 5 tablespoons of ordinary table 9% vinegar in 2 liters of water, and rinse the dyed fur in the resulting solution.

If you want to make your Arctic fox's fur fluffier and silkier, apply a balm for colored hair. Some manufacturers already have this balm in their packaging. Leave for a few minutes and rinse again with running water. Then blot the product thoroughly with a dry terry towel.

Drying

Do not forget to periodically comb the pile so that it does not bunch up in one direction. A downy cat brush is ideal for brushing.

If you are working with individual skins or a collar, then before drying they should be stretched on a wooden board, secured with pins. This is done so that the flesh does not shrink after getting wet.

The drying process will be completed when not only the pile is dry, but also the core. This usually takes 2-3 days. If you did everything correctly, the item will look like new.

Creative transformation of fur

After practicing with monochromatic coloring, experiment and paint the fur in a more original way. Let's look at how to get a spectacular leopard color that won't leave the fashion pedestal.

For coloring you will need two types of paint: black and brown. Additionally, you need to make a stencil from thick cardboard. Cut a pattern of asymmetrical holes in it. Place the stencil on the fur and paint the cut out areas brown as described above. The next step is to apply black highlights in the center of the brown spots.

If you want to get a spotted color, use hairdressing techniques for highlighting. For example, pre-wrap small strands of fur in foil.

Another effective option is to paint only the tips of the fibers. A rich shade will be obtained if you choose a tone lighter than the main one.

How to lighten arctic fox fur

This method is great for whitening yellowed Arctic fox items or making a dark Arctic fox lighter. To do this, you will need a hair bleaching compound or simple hydrogen peroxide. When using clarifiers, follow the instructions included with them.

Dissolve peroxide tablets in water, apply the solution to the fur and leave to act for 15 minutes. It is not advisable to leave it for more than a quarter of an hour, as the pile may thin out and become brittle.

Rinse the product and dry it. Then you can tint it to your desired shade. You should not lighten the fur of an arctic fox more than once, otherwise you risk damaging it irrevocably.

Grandma's recipe

Our grandmothers used this method to bleach yellowed fur when there were no ready-made dyes on sale. Its effect is based not on chemical reactions, but on an optical illusion and lasts “until the first snow.” Dilute a small amount of blue in warm water, wet the sponge and lightly walk over the pile. The result will appear after complete drying.

Express method

Specially designed fur dyes, which are available in aerosol form, will help you quickly refresh your fur product.

Using this spray can is quite simple. Keep it at a distance of 20-25 cm and spray one by one on individual strands. To prevent the pile from sticking together, periodically comb it with a comb.

Manufacturers position this treatment as tinting. Deep coloring cannot be achieved using this method. It is good when you do not want drastic changes, but want to disguise minor defects. For example, yellowed tips or spots. This can is also convenient for stenciling. The color range of coloring aerosols is classic: white, black, shades of brown and gray.

How to paint the interior at home?

It happens that the fur is so worn out in places that the light flesh is visible through it. In such cases, its color can also be adjusted. When it comes to leather, bald spots can be tinted with leather dyes. Don't forget to lubricate it with glycerin first. It is better to use special markers of the desired shade on the finished fur product.

You probably already realized that, with the exception of some details, dyeing arctic fox fur is no more difficult than dyeing hair. The same techniques are used: uniform application, holding, fixing, rinsing with balm.

In addition, you can control the shade yourself using a preliminary test. The color obtained after dyeing in the studio may pleasantly surprise you.

Numerous reviews from owners of “revived” furs indicate that you can update your winter wardrobe at home. Don’t rush to give up on faded or boring items made from Arctic fox. Imagination and skillful hands will extend the life of expensive clothes and make your friends congratulate you on your new thing. Experiment and enjoy the warmth and beauty of your favorite things!

Often a favorite fur coat or vest loses its appearance, although other characteristics are still quite excellent. The fibers fade, become dull and give the product a very worn look. If you want to enjoy the warmth and comfort of your favorite thing, then you can shade it a little. But not everyone knows how to dye arctic fox fur at home.

You don’t have to bother with painting it yourself, but rather take the product to a special workshop, where everything will be done quickly and professionally. But the cost of such a service is often prohibitively high. It will be much cheaper to learn how to dye natural fur at home and do this work yourself.

Important: Please note that if the product is still new, it is strictly not recommended to dye it simply to change the color, since any dyeing of fur shortens its service life.

Each type of fur is beautiful and original in its own way. The painting of each of them also has its own characteristics:

White rabbit, chinchilla or mink fur is the easiest and simplest to dye, because it does not require pre-lightening. You can use any color that can cover the yellowness that appears.

Tip: Keep in mind that rabbit fur is very sensitive to chemicals, so it must be dyed with extreme caution.

Preparation

In order for you to get a very good effect, the fur product must be prepared for painting. Then the paint will apply much more evenly and there will be no bald spots. The most important thing is to thoroughly clean your fur coat or vest. To do this, you need to prepare a mixture of the following substances:

2 tbsp. l. salt;
1 tbsp. l. ammonia;
2 tbsp. l. soda;
1 tbsp. l. washing powder;
2 liters of warm (not hot) water.

All components must be mixed and the resulting mixture carefully applied to the fur. Lightly brush the bristles so that not only the top, but also the bottom part is cleaned. Then moisten a clean cloth with water and wipe the fur from the composition.

After such cleaning, the fur must be dried naturally, without using heaters or a hair dryer. It is also not recommended to leave the product exposed to direct sunlight.

How to paint?

How can you dye fur? This is a completely natural question that arises among many people who are puzzled by the question of how to dye mink, rabbit or arctic fox fur at home. Of course, there are several very realistic home dyeing technologies.

Professional product

You can use special paint for fur, which is sold in hardware stores. It lies very naturally on the fibers, as it is designed taking into account the characteristics of animal fur.

Hair dye

A more affordable option is hair dye. This is also the most popular coloring method, because you can choose any color from a huge palette.

Important: Keep in mind that fur should always be dyed in a darker shade. Over time, the fiery red color will turn to “rusty” or red, and the black color will fade to a dirty brown.

So, how to dye fur at home using hair dye:

mix all paint components according to instructions.
put on gloves.
treat the inner skin (skin) with baby cream, glycerin or petroleum jelly to prevent it from drying out;
wet the fur so that the paint is distributed more evenly;
apply paint with a brush to the entire fur surface;
remember the fur a little with your hands;
wait 35-45 minutes;
wash off the paint with water;
lay the item on a horizontal plane, squeeze out excess moisture with your hands, and leave to dry;
After drying, comb the fur.

You can not dye the entire fur, but only the tips of the fibers. Typically, they are lightened to give the product a richer appearance.

Suede paint

You can treat the faded tips of the fibers with suede paint, which is sold in aerosol cans. To do this, place the spray can at a distance of at least 0.5 meters from the item and evenly paint the entire surface. Leave the fur to dry for a while and then rinse it thoroughly. After this, prepare a fixing solution: 5 tbsp. l. vinegar per 2 liters of water. Wipe the pile with this liquid and leave it to dry.

If a fur item is already dark, but you would like to dye it a bright and rich shade, then you can bleach the fur. Hydrogen peroxide tablets or hair lightener will help with this.

Peroxide is diluted with water in a ratio of 1:3. If you use clarifier, dilute it as written in the instructions. Different manufacturers may make different concentrations of clarifiers. Apply the prepared mixture to the fur and leave for 10-15 minutes. You cannot keep the composition on the pile longer, as the hairs can become brittle. After treatment, rinse the fur with water and dry naturally. It can be painted only after it has completely dried.

When deciding to lighten and dye fur, carefully select the color, because it will be undesirable to carry out these procedures again. Not a single piece of fur, even the highest quality, can withstand repeated dyeing.

When dyeing fur, it is important to know some nuances:

The fur you decide to dye should not be too shabby.
Only clean fur will dye well, so it must be cleaned first.
The yellowed white fur of the Arctic fox can be simply lightened.
Before using any dye, be sure to test it on an inconspicuous area of fur.
When painting, you can hide some flaws and defects.
Instead of full-fledged paints, sometimes you can use small folk tricks. For example: the fur of a red or steppe fox can be quickly and painlessly renewed using a strong solution of potassium permanganate. In this case, use a small sponge. It needs to be dipped into the solution and passed over the villi, being careful not to touch the core.
After dyeing and drying, the fur must be combed so that it becomes fluffy again.
Using tinting shampoo, you can create a unique decor on your fur product. You just need to show a little imagination.

Now you know whether it is possible to dye the fur of the Arctic fox and other fur-bearing animals, and you can also imagine the technology of this process. The main thing is to strictly follow all instructions. And your favorite and cozy fur coat will delight you with its warmth and impeccable appearance for some time to come. If you do not dare to take such an important step as dyeing fur, then contact specialists at a dry cleaner or workshop for repairing fur products.