Corner hinged cabinets - varieties, drawings and tips for DIY assembly. Do-it-yourself corner wardrobe: diagrams, important tips Corner sliding wardrobe diagram with dimensions

The sliding wardrobe, invented in the USA, has become widely used as the main type of storage for household items and clothing. In our country, this type of furniture appeared only in the middle of the last century. This is surprising because many of us have lived in small apartments where its benefits are obvious.

Domestic craftsmen were in no hurry to make a wardrobe with their own hands. The reason is that the cabinet version, except for sliding doors instead of casement ones, has no other advantages over the usual wardrobe.

It is much easier to make a built-in wardrobe with your own hands. Its manufacture will require significantly less material, and even an inexperienced carpenter can make such a compartment on his own. With a smaller footprint, this storage option will have a larger volume than a cabinet storage option.

Sliding wardrobe design: distinctive features

The sliding doors of the first wardrobes produced by our industry did not have rollers for movement. At the bottom there was a longitudinal tenon along which the door moved, which had a groove along the lower end.

This simple design was quite reliable. Its disadvantage was that moving the doors required great effort, because the cabinet itself and the doors were made of heavy material, which was chipboard at that time.

You can make a sliding wardrobe with your own hands, built-in or in a regular mobile version. You can also make a corner cabinet yourself, either built-in or cabinet-mounted.

A corner wardrobe with your own hands must be made in relation to a specific place.

In plan, it can have the shape of a triangle, trapezoid, L or U-shape. Among other types, five-walled can be distinguished. This design has the shape of a pentagon with 3 right and 2 obtuse angles.

This diversity is the versatility of a corner wardrobe. If everything is clear with other forms, then the five-wall requires clarity. This version of the sliding wardrobe, occupying a slightly larger area, is much more spacious than, for example, a triangular analogue.

Stages of preparation for making a five-wall

When making a wardrobe with your own hands, do not try to saw the sheet material from which the side walls and doors will be made at home. It is almost impossible to manually achieve the required dimensional accuracy, especially for a corner wardrobe. Having decided on the dimensions of its sides and doors, it is advisable to use the services of a workshop where it is possible to ensure the required cutting accuracy. It is also advisable to process the ends that will be visible from the outside. The elements located inside the cabinet can be made independently.

Before making a corner compartment with your own hands, check the installation location. This is especially important for the built-in option. Any unevenness in the floor or ceiling where the doors will move must be corrected. Otherwise, there will be problems with installing guides for moving doors.

Make sure that there are no electrical outlets or other elements that could affect the installation of the wardrobe yourself. Consider the size of the baseboards and, if any, moldings on the walls under the ceiling.

It is not advisable to save on a sliding door system. More expensive Italian or German designs will pay for themselves due to reliability and long-term operation.

There is no point in showing the specific design of the carriages. There are quite a lot of them, and each of them has its own installation characteristics. First you need to figure out how to install: the dimensions of the cabinet elements will depend on this. A more reliable option is a door with an upper running carriage. At the bottom of the door there will be a roller moving along a guide.

Before you start making a sliding wardrobe with your own hands, you should have the appropriate tools. When making a built-in version, a hammer drill is required. You will need a power tool to screw in the screws. It is advisable to have a hand-held circular saw with a guide fence. A hand saw will also work.

You will need an angle clamp, a tape measure, a stapler, a soft and hard hammer, a drill with a set of drills, and a hex key for screwing in confirmations. To drill confirmation holes to a given depth, you will need confirmation drills. For simple drills, a stopper can be used.

It is necessary to purchase dowels, supports for shelves and screws.

Drilling holes in chipboard is the main operation when assembling furniture

To fasten panels made for furniture from chipboard, confirmats are used. Typically, confirmats with dimensions D×L = 6.4×50 mm are used for furniture. This mount has d=4.4 mm. The hole diameter for it should be in the range of 4.5-5 mm. With a larger diameter, the fastening will not be reliable; with a smaller diameter, the confirmat can destroy the fiberboard material.

To drill holes, special drills are used, which drill to a depth L and provide the appropriate dimensions in the upper part of the confirmat (H and h). Then the surface of the slab is countersunk to fit the cap. Screw in the confirmation without putting much effort, using a special hex key.

3 drilling options:

drilling through the entire thickness;
drilling in the end;
drilling in 2 parts at the same time.

Another, most difficult option is drilling for dowels. The general condition for all types of drilling is the perpendicular position of the drill to the surface.

Let's consider the option of drilling in 2 parts. The parts are placed next to each other and secured using an angle clamp or other device. After this, marking and drilling are performed. This option is the fastest and most accurate. To determine the mark based on the thickness of the chipboard, it is advisable to make a template from wood or aluminum corner. If the chipboard thickness is 16 mm, then the center of the hole in the template should be exactly in the middle.

If the parts are connected in such a way that the holes are drilled separately, then the strength of the fastening depends on the accuracy of the markings. This is how you have to drill when connecting parts to dowels. For example, to install a cabinet lid on dowels, holes are first made in it using a drill with a diameter of 8 mm with a limiter that does not allow drilling through it. Holes from the edge of the cover are drilled taking into account the indentation of the sidewalls, if provided. Using the same drill, holes are made in the sidewalls to a depth of 20 mm. The accuracy of the marking determines whether the dowels will fit into the holes. The ends of the dowels are placed on glue. When assembling, craftsmen do not recommend pouring glue into the holes on the lid; you may have to disassemble the cabinet.

It is especially easy to assemble a built-in wardrobe, which will have only 2 sides, fixed perpendicular to the wall. These parts are securely attached to the ceiling, floor and wall using corners. The corner is secured to the base using plastic dowels and self-tapping screws. The sidewall is secured to the corners with self-tapping screws. It is between these elements that the door movement system must be secured.

With proper preparation, there should be no problems with assembling the cabinet.

Corner wardrobes are extremely ergonomic: due to their beveled shape, they do not appear bulky and, at the same time, are extremely spacious. Let's look at examples of how to make a corner cabinet with your own hands - what models can be implemented, what the typical dimensions and contents may be, and how to calculate the details using the example of ready-made drawings and diagrams.

Designs, drawings and photos of corner cabinets

Conventionally, corner cabinets can be divided into two categories: beveled trapezoidal and strictly rectangular, with diagonally and perpendicularly located facades. In both cases, the cabinet can be:

Symmetrical and asymmetrical.
With separate mezzanines and without mezzanines.
Combined filling and allocated exclusively for shelves or hangers.
With internal or external drawers.
With a different number of facades (one-door, two-door, three-door).
In the form of display cases, open shelving and designed for storing clothes.

We will only consider do-it-yourself wardrobe (dressing) corner wardrobe plans.

Corner cabinets with perpendicular doors, most often, represent an attached composition of two ordinary cabinets of a slightly modified design. In rare cases, there may be cast structures, especially if the front part is sliding, like an accordion.

The advantage of trapezoidal corner cabinets is their large capacity and functionality. For example, the width of the outer sides can be reduced to a minimum and this will not interfere with placing hangers with bulky clothes - after all, the inner part expands towards the center.

Do-it-yourself corner cabinet: deciding on the dimensions

Before wondering how to make a corner cabinet with your own hands, you need to decide on the overall dimensions. Ergonomic shapes attract many, but it is not always possible to achieve what you want if the allotted space for placement is too small.

The smallest dimensions of a corner cabinet with your own hands can be compared to the typical dimensions of a kitchen wall unit. It occupies 600x600mm from the corner. In order for the facade to be of sufficient width (400 mm minimum), the depth of the pillars (sidewalls) is set to no more than 300 mm. Naturally, with such dimensions there is no question of placing the barbell under the hangers. Only shelves or hooks for clothes.

For a corner wardrobe with a compartment for hanging clothes, the distance from the corner, at least on one side, must be at least 800 mm. Then the depth of the stand can be set at 450mm, which is quite enough for hangers with light clothes (for “men’s” and outerwear, 500mm is required). Do-it-yourself corner cabinet diagrams are approximately the same, in the ratio of the depth of the stand and the remaining space for the facade.

With asymmetrical options, it is quite possible to implement your plan with dimensions ranging from an angle of 850x650mm, 800x700mm, etc.

How to make a corner cabinet with your own hands using the example of a drawing

Let's consider a typical symmetrical model, with overall dimensions 2100x900x900mm. A do-it-yourself drawing of a corner cabinet will look like this.

Along one of the sides, the width of the body allows for the placement of shelves; they must be made taking into account the required space for hanging the rod - from 500mm minimum. Drawers can be built into the section with shelves. The only nuance that should be taken into account in the future is the placement of hinges on the facade. The loop should not “get” into either the drawer or the shelf!

The height of the cabinet allows for the placement of two rods under clothes. A distance of 900-1100 mm is sufficient for short jackets and shirts, and the hem of long dresses can simply be “thrown” over the lower rod. Or you can make a shelf at the top or bottom, for hats or shoes.

How to calculate the details of a corner cabinet with your own hands

Once you have decided on the dimensions of the corner cabinet with your own hands and the internal contents, you can begin to calculate the details. The simplest option is in the form of a table in the Excel office program.

We write down all the details in strict accordance with the texture of the drawing, first the length, then the width. If you enter the formula into a tabular form for calculating the square footage of each part, you can sum it up and roughly estimate how much volume the cabinet will “flow into.”
At the same time, we designate the visible sides that will need to be rolled up with an edge in units. Formulas will also help you pre-calculate the footage of the end tape.
I recommend highlighting irregularly shaped parts so as not to lose sight of them (for example, as in the table below, in yellow). And also clearly show along which side they will be rolled with an edge.
You can see how to calculate the size of the fronts for a corner cabinet. Strictly speaking, the facade part can be made of another material - for example, MDF or solid wood.
A similar method is considered to be detailing fiberboard.

DIY corner cabinet cutting cards

The calculated dimensions of parts from Excel are transferred to a special cutting program. Parts for which the direction of the pattern is unimportant (for example, stiffeners, plinths, internal shelves) can be rotated to minimize waste. In our case, there is a reason to make the front part from a different material - the body of the corner cabinet with your own hands economically “lays” on two sheets.

The cutting can be ordered from a third party along with PVC seaming. Typically, such services are provided by all companies selling chipboards. At home, rolling up PVC is quite labor-intensive and is unlikely to be possible accurately. You will have to be content with melamine tape, the only advantage of which is its low cost. The table shows that 28.83 linear meters will be needed. But it’s better to take it with a reserve, + 10-15%.

How to mark cabinet parts for drilling

If you correctly mark and drill all the parts for the corner cabinet with your own hands, then in the end it will be assembled very simply, like a construction set. The most convenient way to do this is in special furniture programs, for example, Basis Furniture Maker.

The principles are simple:

Furniture is assembled using Euroscrews (confirmats).
The parts are drilled into the end and from the front side.
The distance from the edge of the front side part should be the same. For example, 50 mm. Or in the center.

After the fasteners are placed, we number the parts. If there are parts of the same size, but with different fastening principles, we use additional markings (a, b, etc.).

In Basis Furniture Maker you can get specifications for drilling in this form.

But here you need to be careful, clearly understand where the “face” of the corner cabinet part is, and where the “wrong side” is, along the edge-rolled sides. The program does not see this nuance; it places the fasteners from left to right. And during the drilling process, you may come across parts that need to be mirrored. In principle, it is not difficult. Anyway, with the drilling specifications, the whole process will go much faster.

How much will it cost to make a corner cabinet with your own hands?

By correctly drawing up the drawings of a corner cabinet with your own hands, all the design stages, the risks of errors that lead to inevitable additional expenses are reduced to zero. If you make any furniture with your own hands, it always costs less. Actually, nothing prevents you from predicting costs before starting all work. Find out all the prices for materials, fittings and hardware in your city that will be required when making a cabinet with your own hands, and enter it into a simple excel sheet.

The most significant costs will be for the purchase of chipboard and cutting. We took a standard model - changes up or down by 100-200mm will not change the material consumption significantly. It will also take approximately 2-3 sheets depending on the number of shelves and fronts (whether they will be ordered separately or not).

The design of the corner cabinet is very diverse and therefore this model occupies a leading position in popularity. The furniture is very multifunctional, which means it is necessary in almost every home. No matter what kind of room you have, a corner cabinet can easily help revive your interior.

Convenient and compact corner cabinet

When wondering how to make a corner cabinet with your own hands, you should understand that this is a painstaking and not quick task. Moreover, if in the end you want to see a product that is in no way inferior to the store version.

Before you start work, make all the necessary dimensions, draw up drawings, prepare material and tools, and the information presented below will help you with this.

A do-it-yourself corner wardrobe will easily help you solve the problem of storing your wardrobe, personal belongings, shoes, cutlery and much more. It is practical and roomy, but does not take up much space, freeing up space for more necessary uses. The dimensions of corner cabinets directly depend on the geometry of the room, how many corners it has, and how much space there is to install the cabinet. Even uneven walls can be easily eliminated if you make the correct calculation of the corner cabinet and give the room a noble look, adding bright notes.

Large and spacious wardrobe

The dimensions of the corner cabinet directly depend on the wishes of the master. But in general, it is always made under the ceiling or built-in, so it will become more spacious. Undoubtedly, the drawing of the corner cabinet shows that it has plenty of advantages (spaciousness and small dimensions), but there is also one significant disadvantage - inaccessibility to the farthest point of the cabinet, especially not the upper shelves.

Drawers will also not be a convenient option, since they can only be placed on one square of the cabinet. The instructions for assembling a corner cabinet show that this option is not popular and is very rarely used in practice.

Often, a custom-made corner cabinet is installed in the kitchen, and this is not just like that:

with its help it is easy to hide pipes, wiring, drains and other plumbing fixtures that are unpleasant to the eye;
You can put away dishes that you rarely use in the back of the cabinet.

Before assembling a corner cabinet, check its dimensions in advance. This is the main point in the work.

Dimensions and shapes of corner cabinets

Buying a ready-made model in a store can be cheaper than ordering it to your own specifications. But at the same time, it will not become so practical and suitable. Any design, ready-made or assembled independently, has its own appearance:

triangle - the drawing of a triangular corner wardrobe is quite simple and clear. In apartments where there are regular shapes and impressive dimensions, installing such a model will not be difficult. It is located in any corner, it can be convex, smooth, wavy, with various doors;
diagonal - outwardly appears the same as a triangle, but one of the sides is noticeably longer than the other. This option is installed in places where there are window and door openings;
trapezoid is an excellent office option, also suitable for children's rooms and living rooms. It is distinguished by its spaciousness, but at the same time by its minimal dimensions. Installation is possible even in the smallest room.

Triangular Diagonal Trapezoid

Custom cabinet sizes

Assembling a corner cabinet of a non-standard size is no less interesting than a regular one. Drawings of corner cabinets are drawn up in advance, taking into account all the features and nuances. Most often this becomes necessary when:

minimal room area, where every centimeter is important;
non-standard room layout;
large room area.

1 2 3

It is almost impossible to choose the design of such a corner wardrobe in a store; you will have to rely entirely on your imagination. In some cases, this is even good; you can create a unique model, excluding similar options.

1 2 3 4

Remember that for assembling any corner wardrobe there are cliches that should not be violated. The service life of the product and its strength depend on them. Each corner cabinet has its own dimensions, which can be changed, but not completely ignored.

Knowing how to make a modern wardrobe in a corner with your own hands, you can save a lot of money. Don't limit yourself to anything, use additional materials such as plastic, wood, processed glass and mirror surfaces. For example, a corner cabinet with photo printing has become a real feature of our time, so why not use this idea in your work? There are no restrictions in this area. A corner wardrobe with an original photo print will surprise both adults and children, and the mirror surface will delight you with its functionality. Don't waste time, get started as soon as possible.

have recently become one of the most common pieces of furniture. This design provides convenient. Most often, they are not purchased ready-made, but made to order. But if you have the opportunity and the necessary materials, you can make a furniture set yourself. Before you begin, you need to decide on the number/location of shelves and drawers. It is also important to plan the design taking into account the dimensions of the room. In any case, all these points need to be studied before making a wardrobe with your own hands. In this case, the drawings are a kind of starting point, and our review today will help you cope with this rather difficult task with a minimum of errors.

A feature of this type of furniture designs is that they allow you to save usable space in the room. At the same time, sliding doors for a wardrobe can be glass, mirror, rattan, plastic or bamboo.

So, let's look at the main advantages of furniture sets:

variety of designs: built-in, rectilinear, cabinet and;
furniture sets allow you to effectively use even a small space. This is an ideal solution for small spaces. At the same time, mirror surfaces allow you to visually increase the space;
brevity of designs;
filling wardrobes. Such furniture sets allow you to hide everything unnecessary. They are used not only for clothing, but also for various household items and small appliances;
models can be built-in, cabinet and with mezzanines;
the wall of the room, as well as the floor or ceiling can be used as the walls of the cabinet;
wardrobes are made to order;
possibility of independent design.

It is worth noting some disadvantages:

rapid wear of the sliding system;
high-quality internal filling of the cabinet is required;
the aluminum profile may be deformed;
Careful maintenance is required: cleaning all surfaces and guides.

For your information! To prevent the door from coming off the rail, Schlegel for sliding wardrobes is used at the joints and ends. It needs to be glued, which will create shock absorption when the doors are opened suddenly.

Types of wardrobes

Let's look at the main types of wardrobes:

built-in models that do not have a floor, back wall and ceiling. Such headsets cannot be moved or rearranged. They consist of side walls, shelves and internal partitions. Built-in models are made to order, but you can also purchase separate elements for self-assembly;
free-standing sliding wardrobes are equipped with doors that move on a rail. This design has a floor, a back wall and a ceiling;
corner headsets are suitable for small spaces. It is compact in size but very spacious inside. Corner design is suitable for a small rectangular room or square hallway;
diagonal corner completely occupy the entire corner. Such designs are more spacious and look stylish. Inside you can hide not only a wardrobe, but also bed linen and blankets.

Wardrobe materials

Before you start making a corner cabinet or any other with your own hands, decide on the material.

Tree

For durable sets, you should choose solid wood. This is a prestigious material for furniture. It is worth considering that wood is not the best option for a built-in wardrobe. The humidity level is higher in the niche. For a wooden cabinet, you must carefully select wood that is free from cracks and knots. The frames of the doors are also made of wood. In this case, it is necessary to glue them together.

Wooden sets have the following advantages:

environmental friendliness of the material. The tree does not contain toxic components;
increased level of wear resistance;
aesthetics of products. Wood furniture is distinguished by natural colors and unique patterns;
naturalness of the material;
possibility of carrying out restoration work;
ergonomic use of space;
variety of styles.

Drywall

One of the popular materials is, which is made from pressed wood chips. To create a dense composition, a thermoactive synthetic resin is used. This material is easy to process.

When working with plywood, it is necessary to take into account the softness of the material. Products may become deformed when twisted. It is recommended to use washers for such connections.

Laminated plywood is also popular. At the same time, plastic reduces the influence of formaldehyde in resins.

Furniture panels

The best material for homemade structures is furniture panels. This material is known for its durability, environmental friendliness and reliability.

It is worth noting the following advantages of using this material:

does not require significant funds;
you can bring unusual design ideas to life;
the product can have different shapes and designs;
For a furniture set, you can choose functional fittings.

Location of the wardrobe in the room

Before you start creating a wardrobe with your own hands in the hallway or in another room, it is worth considering its location.

If you place the set along a solid wall, then the furniture itself will be perceived as a wall. It would be better if the closet reached the ceiling. Doors can be mirrored, which allows you to visually enlarge the room.

If you place two identical cabinets along the wall and leave a distance between them, you will get an alcove. You can put or in the resulting niche. In the living room, an alcove can be used to create an area with a false fireplace.

A practical solution would be to install the headset along the edges of door and window openings. A mezzanine can be installed above the opening. The cabinet can be recessed into specially created niches. If the size of the room allows, then small sizes can be used.

Depending on the specific design style of the room, it is not necessary to build built-in wardrobes or disguise them. For retro or glam vintage style, bulky furniture will only complement the colorful design.

It is also necessary to choose the right drawer mechanism for the wardrobe. It shouldn't be noisy.

Hallway

Children's

There are many things that need to be placed in a child's room. These include seasonal clothing and shoes, children's toys, board games and sports equipment. In addition, you need to find a place for books, notebooks and bedding.

The sliding wardrobe is a spacious set in which you can place all your things and objects. The doors of this piece of furniture move apart to the sides, which does not take up much space.

Keep in mind that cabinet furniture is selected for children, so the shelves must be at the required height. It is important that there are no sharp corners at the ends of shelves and racks. Each thing must have a specific place, so the child will quickly learn order.

Note! When ordering externally, as a rule, it is not possible to control the consumption of material.

It is important to choose high-quality fittings; the correct adjustment of wardrobe doors depends on this. Doors should not jam or slide. Sliding systems consist of a profile and a sliding support. Roller mechanisms can be axial or bearing-based.

Choosing cabinet filling

The internal content helps decide what the layout will be. You should not place the section for outerwear in the center, as moisture from it can spread to the sides. It is better to place this compartment on the side. Boxes for bed linen are not recommended to be placed directly above the floor.

How to correctly arrange the elements and how to assemble a wardrobe with your own hands can be seen in the video below:

Number and sizes of doors, guides, rollers for wardrobes

When choosing guides for a sliding wardrobe, pay special attention to the material they are made of. The plastic profile has the lowest cost, but it is characterized by low reliability and short service life. The best solution would be to use combined rail guides, in which the supporting surface for the rollers is made of metal.

The steel profile for sliding doors has increased reliability. Rail supports for furniture of famous brands are made from aluminum.

The rollers are made of metal, since plastic is not durable. The roller contains a ball-bearing internal mechanism that allows the door to move freely in the horizontal direction.

Do-it-yourself wardrobe and compartment door assembly

We invite you to familiarize yourself with the process of assembling a sliding wardrobe with your own hands in the table below:

Photo	Description of work
	To assemble the wardrobe, you need to apply markings. It is necessary to note the dimensions of the cabinet in width and the location of the vertical rack. The heights at which the shelves will be fixed are noted.
	Drill holes for dowels.
	The profile is put on before installation.
	Install a vertical stand.
	We mark the mezzanine shelf and install it.
	The side wall is installed.
	The shelves are marked and installed.
	The clothes rail is marked by size and installed.
	False panels are installed.
	One panel is fixed at the bottom.
	The supporting upper part is attached.
	The bottom guide is secured with a screw.
	The top guide is attached in the same way.
	Doors are being installed.

The process is presented more clearly in this video:

Interesting solutions for sliding wardrobes: photo examples

Don’t forget about the decor of the furniture set. Pilasters can be used as decoration. These elements are made from solid wood or MDF. You can install a furniture cornice on the roof. Interior baguette is used for decoration. You can choose a baguette of different shades. Furniture with photo printing also looks stylish.

Article

A sliding wardrobe saves space on its own, and if it is made in a corner, then this is the most successful option. It doesn’t attract too much attention to itself, leaves a lot of free space in the apartment, and there’s so much you can put in it! It’s quite possible to make a comfortable corner wardrobe with your own hands.

Design Features

Unlike its ordinary counterparts, the corner wardrobe is always designed to be stationary. It is created to fit the dimensions of a specific angle and does not imply its movement.

First you need to decide what kind of corner cabinet you need. Main types of construction:

triangular;
trapezoidal;
L-shaped;
"five-walled"

In addition, cabinets can be built-in or cabinet. A built-in closet is essentially a small storage room. The shelves in it are mounted directly on the walls, and the space is enclosed by a door. The cabinet cabinet has a base, top cover and back wall, at least made of thin fiberboard sheets.

The most space-efficient one is a triangular cabinet: it has no side walls. Its depth will be determined only by the width of the walls that you are willing to “give up”. The remaining cabinets are a little more difficult to manufacture and will have additional depth.

If you decide to make a corner wardrobe with your own hands, it makes sense to use the entire space from floor to ceiling to ensure maximum capacity.

It is very important to take into account the features of the angle itself. If there are unevenness on the floor or walls, they must be leveled, because they may affect the operation of the sliding door mechanism. In addition, experts recommend doing all preliminary measurements only after leveling the walls and floor! Pay attention to the plinth near the floor or under the ceiling - will it allow you to install a cabinet?

Today, it is popular to manufacture a radius cabinet, the facade of which is made in the form of a semicircle or wave. Such furniture fits harmoniously into a variety of interiors. This type of cabinet is especially good for a large hallway and bedroom. For the kitchen, a corner version made of plasterboard is very popular - it is simple to implement and takes up very little space.

When you make drawings of the interior of such a cabinet, you need to take into account its purpose. If this is a hallway closet, it should have a rod for outerwear, shelves for shoes (possibly high ones for boots), shelves for hats and accessories, space for umbrellas, gloves, etc. In the living room, a wardrobe can serve as storage for books, documents, blankets and bedspreads, and beautiful dishes. Accordingly, the main thing in it is the shelves. A small safe can also be provided. A wardrobe for a bedroom usually holds clothes, linen, and bed linen. It contains a bar, drawers, shelves, and cells.

Step-by-step instruction

Once the cabinet diagrams and sketches have been created and approved by your household, you can begin making the cabinet. You will need the following materials and tools (sample list):

furniture board;
metal profile and roller mechanism for doors;
fiberboard sheets for the back wall (if it is intended);
drawers, doors, rods, hooks;
accessories;
false panels (if necessary);
perforator;
screwdriver;
"hexagon";
“level” (to assess the evenness of the shelves);
glue, ruler, tape measure, pencil;
triangle;
screwdrivers, hammer;
fasteners (bolts, confirmations, supports for shelves, etc.)

According to the experience of many men who have already created cabinets with their own hands, cutting the boards and their external edging is best left to professionals: take the material to a workshop where there is a special tool for precise cutting. They can also do original milling on the facades. You can “cut” shelves and parts for drawers yourself – i.e. interior filling of the cabinet.

If your closet is built-in, first of all you need to mark the boundaries on the floor where the doors will be. The same lines need to be applied to the ceiling. Then shelves and rods are screwed to the walls using a hammer drill and other tools. The final touch is to install the door guides and the doors themselves.

For a cabinet with back walls and a bottom, the cabinet base or podium is first assembled and installed. Then the long and important process of drilling holes begins. You must first carefully mark all attachment points. Then you can drill. If the hole is made on a plane, an 8mm drill will be required. For end holes - 5 mm, and its depth should not exceed 60 mm.

Each cabinet created by yourself is unique, so it is impossible to create a universal description that would suit everyone. But there are some general principles for assembling furniture of this type.

First, the frame of the cabinet is assembled - that is, its vertical walls and partitions, which are fastened together by horizontals - the base, the top cover, etc. Then shelves and rods are screwed to the side walls. Carriages for drawers are attached. A metal sliding door mechanism is attached to the top and bottom. After this, the back wall is attached (usually it consists of several sheets of fiberboard, cut to fit the sections of the cabinet). Then the drawers and doors are installed.

Ideally, the cabinet should be assembled “lying down” - i.e. laying out the parts on the floor. This gives you a better chance of completing the assembly accurately. But this is not always possible due to limited space. Additionally, a tall cabinet that almost reaches the ceiling can be very difficult to lift. The main rule for assembling “standing up” is to assemble all the parts from the bottom up - the base, side walls and partitions, then the shelves, etc.

A carefully thought out sketch, a good diagram, a little patience and precision - and your own corner wardrobe will delight you for many years!