Universal router from Rostelecom

This article is dedicated to the Sagemcom f@st 2804 device. In the recent past, Rostelecom and MTS began to actively promote it. The latter supplies it under the name “MTS Universal Router”.

Upon closer examination, it turns out that this device combines the functions of a 3G, ADSL, and Ethernet router. In addition, it can work as a wi-fi access point that supports 802.11 n/g/b. Additional bonus: supported IPTV. The router's equipment is not very rich, but, nevertheless, everything you need is there.

Please note that MTS offers two models that differ in appearance and software (V1 and V3). The latest firmware versions of the MTS universal router allow you to connect more than 13 modem models to it.

By the way, download latest version Software, installation and recovery instructions can be found on the official website.

Rostelecom offers a V7 version of the device. But their website, unfortunately, cannot boast of the presence of fresh software. There is only a brief specification of the device universal router f st 2804, and instructions.

The router, manufactured by Sagemcom, allows you to connect to the Internet via a high-speed connection.

The most notable characteristics of this router:

high-speed connection via telephone cable, the phone itself is free;
support for IPTV transmission to digital set-top box;
accessing and managing multimedia content.

The device is equipped with a modern, powerful processor that allows you to connect to the Internet at maximum speed, in addition, it is possible to view several high-definition IPTV channels at the same time.

Wireless device interface router fast 2804 V7

The Sagemcom router supports the 801.11b/g/n WFA specification. It also has a 2x2 transmit/receive configuration, thanks to which the actual connection speed reaches 80 Mbps. The following modern security protocols are supported: MAC address filtering, WPA, WPA2, WEP. The router is equipped with a function for automatically selecting a radio channel and a separate button, which provides convenience and simplicity wireless connection according to the WPS protocol. There is an additional button on the case that turns on the wireless interface.

Multimedia content

The device is capable of operating as a DLNA server version 1.5, supporting the Webdav, Samba, UPnP protocols, which allows access to multimedia content from any device. There are two USB ports through which access to a printer or external storage can be provided.

Router functions

The router supports a large number of IP services applicable to double-play routers:

IGMP proxy/snooping
DNS dynamic/server/relay
DHCP relay/server/client
Full speed IP routing

Firewall

The 2804 v7 router has a firewall with the following functions:

Complete address/protocol filtering/port
Stateful Packet Inspection

Configuring traffic through the application firewall:

VoIP services based on H.323 and SIP
a large number of WEB applications

Connection using the example of a device from MTS

Router 2804 makes it possible to implement it in an office or home network broadband connection to the Internet through channel reservation:

3G modem, Wimax, Fon;
on PC and TV IP television;
wireless Wi Fi connection (802.11 n\b\g)

The modem is connected in the following order. We connect the cable to the RJ-11 connector via a splitter. The universal router is connected to the computer using Ethernet cable, for this there are four connectors on the back of the router. The external modem is connected to the USB port, then the router itself is connected to the network.

An external modem can be used to reserve an Internet channel. If the main channel is interrupted, the device will automatically switch to a connection via an external modem.

Setting up the router

Having established an Ethernet connection, open the browser and enter the IP address of the device. The default address is set to: 192.168.1.1. After this, the system will require authorization. We enter your username and password, or leave the default one, then in the window that opens all the settings necessary for working with the Internet appear: universal router settings, connection parameters, channel configuration, wireless connection.

A separate tab provides advanced configuration of the f st 2804 router, which is required for experienced users. Once you enter and save the required data, the connection setup is complete.

It was mentioned above about the possible reservation of a channel for those cases when the main connection is lost. This is done in the following tab: “3G channel configuration”. We put a tick in the inclusion point, and after 15 seconds. the device will automatically switch to the connection via the backup channel. When the main connection is restored, the router will automatically switch back.

Setting up a wireless connection, in basic parameters contains: enabling the WLAN module, the function of not detecting an access point, the Mac address of the wireless connection, network authentication and selecting the channel through which the router communicates with clients.

In the “Management” tab, you can back up setup data, update or restore the system. After update software devices, previously used settings are retained. The update takes place in a couple of minutes.

Let's summarize the above

The fast 2804 universal router is quite large, but working with it is very simple. The functionality of the device is high, it is possible to implement all the necessary resources, including backup switching from the main connection to an additional one. Everything described gives reason to believe that the universal router from Sagemcom will be one of the most convenient options implementation of office or home communications.

Many owners of the Rostelecom Sagemcom f st 2804 v7 router prefer to configure the Internet and IP-TV themselves, since modern firmware versions allow even an ordinary user to do this. If you also wondered how to configure the Rostelecom fast 2804 v7 router, then this article is just for you. In it we will analyze in detail the process of setting up the connection itself and the parameters of the future wireless network.

Preparing the router

First of all, we need to correctly connect the Rostelecom Sagemcom f st 2804 v7 router. To do this, connect the power cord to the rear panel. Then if used telephone connection, insert the Internet cable into the first slot. If your home has fiber optics or any other connection using a standard Ethernet cable, insert it into the first of the next four ports.

After that, turn the router front side and look at the indicators that light up:

“Power” - lights up in any case if the router is connected to the network;
“DSL-link” - shows us that the fast 2804 Rostelecom router receives a signal from the provider’s servers, so it should be on;
“WiFi” - enabled by default in all Rostelecom modems;
“LAN” - lights up if the cable is connected correctly.

Important: as you understand, even with factory settings, the router can “distribute” a WiFi signal. So there is no need to configure it separately. But, if you want to change the network name or the set password, you can find instructions for this later in the article.

I would also like to note that while setting up the Rostelecom f st 2804 v7 router, you may have a question: what is this USB port on the back of the case? Answer: This is a standard USB for connecting your portable Internet (connect) in case of a loss of connection with the main provider or the need to use this type repeater on several devices at once.

Setting up a Rostelecom fast 2804 v7 router

The first stage of setup is entering the main interface. It is done through the browser:

launch an internet browser that is convenient for you;
In the address bar field, enter the IP of your router: 192.168.1.1;
In the Login and Password fields, enter the keyword “admin” in lower case.

If everything is done correctly, you will be redirected to a new page in the same tab, where the main menu will be located on the left on a blue background. We will work with him.

Resetting basic settings

If you are setting up a Rostelecom fast 2804 router that has already been used in another place or because the settings have been lost, then all settings must be returned to the factory values. You can do this as follows:

go to the last menu item “Management”;
open the first subsection “Settings”;
find and click on the submenu item “Reset”;
in the middle of the page we see a button “Restore default settings”;
click on it;
Click OK in the confirmation window that pops up;
We wait until the reset operation is completed and we will be transferred again to the main page of the web interface.

All is ready! Now the Rostelecom fast 2804 v7 router can be configured.

Removing unnecessary factory connections

Since after resetting all parameters the router creates several initial non-working connections, the first thing you need to do is delete them so that there are no errors during operation. This is done in several steps.

in the main menu on the left we find “Advanced settings”;
in the submenu that pops up, open “WAN service”;
in the updated window we see a table of three points (three connections), on the left side of which there is a “Delete” column, put a checkmark in all of them;
under the table we find the “Delete” button, click on it;
in the updated window we see an empty table.

Still there, in “Advanced settings”, open the item “Second level interface”;
the first section of the submenu is “ATM PVC Interface”;
delete the only table item in the same way as in the previous step;
waiting for the page to update;
open the last item of the submenu that pops up – “ETH Interface”;
delete the existing row in the table in the same way;
We observe a page reload and the disappearance of the remote configuration;

Direct setup by Rostelecom Sagemcom f st 2804

After the cleaning is completed, the Rostelecom fast 2804 router is deeply configured:

return to the “ATM PVC Interface” and click on the “Add” button;
on the page that opens, indicate the Internet connection data: VCI and VPI;
We leave all other points unchanged;
scroll down the page - “Apply/Save” button;
in the same way, we add a connection for IP-TV by clicking on “Add” (only the VCI will change, in most cases).

The Rostelecom f st 2804 v7 router is connected on the “WAN service” tab:

click “Add”;
select the created configuration – “Next”;
indicate the type of service used (in most cases PPPoE);
on the page that opens, enter the user data (login/password) specified in the Internet service agreement;
In the same place, select the desired name for the connection (“PPPoE Service Name”);
check that there is a checkmark next to the item “PPP repeat...”;
click “Next”;
Move the “ppp1” route you created to the left column if it is in the right. then move the USB connection in the opposite direction;
We perform the same operation and “Next” again.

We see the list of final settings and make sure that in the second line opposite “NAT” the “Enabled” option is indicated. If this is not the case, we return to the stage of specifying the connection login and password and check the boxes on this page that include NAT and Firewall. Apply the changes made.

How to configure the fast 2804 v7 Rostelecom router for IP-TV? Very simple! We repeat the first three points from the algorithm above, only we select the second created configuration (in the second step) and the Bridge connection type instead of PPPoE (in the third). Move on, save the settings and voila! There is Internet!

How to connect the Rostelecom f st 2804 router to WiFi

The firmware of the Rostelecom f st 2804 v7 router implies initial settings for a wireless connection. To change them, you need to do the following:

main menu item “WLAN Settings”;
go to the “Main” submenu;
check the box to enable wireless communications;
change the SSID to any network name you like and save the changes;
go to the “Security” submenu;
disable WPS (the weak point of the wireless connection, which is easy to hack);
we check that our network name is selected and change the standard password to the one we created (the field after the “Authentication” item);
We save the adjustments made.

That's all, we figured out how to configure the Rostelecom Sagemcom f st 2804 router on our own.

Summarizing the above material, we can say that connecting a router to the Internet comes down to four steps:

reset;
removing standard connections;
creating a new PPPoE port;
changing WiFi settings.

Having mastered these steps, you yourself will be able to configure and tell others how to connect the Rostelecom f st 2804 router to the network.

Important: the VPI and VCI values discussed in the article are unique for each region of Russia. Therefore, they must first be clarified with the provider, or found on the Internet.

The entire algorithm described above is clearly demonstrated in this video:

What other questions did you have during setup?

Using a router Sagemcom Fast 2804 v7 it is possible to connect to the Internet via Ethernet technology (eight- or four-wire twisted pair) or ADSL (thin telephone cable). In addition, this device allows you to create wireless network and connect an IPTV set-top box from Rostelecom. In this article you will find a description of the process of setting up the Sagemcom Fast 2804 router to work on the Rostelecom network.

Connecting the router to the computer

Before you begin configuring your router, you need to connect it. To do this, connect your computer to one of the LAN ports (LAN2-LAN4) of the router using the patch cord that comes with the device.

If your Internet is via a telephone cable, connect it to your router using the ADSL port. If you have Internet access via Ethernet technology, connect the cable to the LAN1 connector. Then, plug the router into a power outlet.

How to update the firmware and run automatic router setup

A router purchased at a Rostelecom showroom comes with a special DVD required to automatically configure the device. Using the same disk, the subscriber is asked to update the Sagemcom Fast 2804 firmware version from v5 to v7. This is necessary for a more stable connection with servers, because... This version was developed and adapted specifically for Rostelecom.

After you insert the disc into your computer's drive, the Rostelecom Setup Wizard will launch automatically. Using the Setup Wizard, you can set all the necessary parameters without connecting to the router’s web interface. To do this, select " Full customization" and follow the program instructions.

If you want to do without the Wizard and make all the changes yourself, select "Update". Wait until firmware v7 is installed on the router, after which you can close the program.

Login to the router admin panel

After updating the firmware, you can begin directly configuring the device in the Web interface:

Open an Internet browser (browser) on your computer.
In the address bar, enter the address of your router, which you can find on the label on the bottom cover of the device. If this data is missing, go to properties local connection and find the "Default gateway" option. This is the address of your router.
In the window that opens, the system will ask you to enter your login and password to access the router configurations. This data is also indicated on the router label. The most common combination is "admin" and "admin".

If the data is entered correctly, it will open home page web interface Sagemcom Fast 2804 v7.

Setting up a network connection

Select the "Advanced" tab from the menu on the left.
Enter the "WAN service" section. Check all existing connections and click the Remove button.
In the Second Layer Interface section, also delete all content.
Click the "Add" button.
Now you need to specify the values of the VCI and VPI parameters. These data are individual for each region of Russia. You can find out the values of these parameters by contacting .

Click "Apply and Save".
Go to the "WAN service" section and click "Add".
Select the connection you just created from the list and proceed further.
Now you need to specify the connection type. As a rule, Rostelecom provides Internet via a PPPoE connection.

Specify the username and key for the PPP connection. This information is usually provided in about the provision of services. If a copy of the agreement is lost, you can contact Rostelecom customer support. You can specify any name for the service.

Check the "Retry PPP on error" checkbox.
You don't need to change anything in the following steps. When finished, click "Apply and Save".

Setting up a router to work with Rostelecom television

To connect a TV set-top box via the Sagemcom Fast 2804 v7 router, you must do the following:

In the “Second-level interface” section, you need to create another connection and enter the VCI and VPI values, which will differ from the values entered when setting up the Internet.
In the "WAN service" section, create a new object and select the created connection.
Select the service type "Bridge" and click "Apply".

Open the "LAN" tab.
Here you need to check the “Disable DHCP server” checkbox.
Check the "IGMP Snooping" and "IGMP Proxy on Bridge" options.

Wi-Fi setup

In the "WLAN" category, select the "Basic" section.
Activate the "Enable wireless network" and "Enable multicast transmission" options.
In the "SSID" line, write the name of your access point.
Then go to the "Security" category.
Select authentication using "WPA-PSK", encryption using "TKIP and AES".

Set your password (at least 8 characters).
Click "Save".

When finished setting up your router, reboot it. To do this, use the "Reboot" button in the "Management" section or simply disconnect the router from the power supply for a few seconds.

One of the largest providers of telecommunications services, PJSC Rostelecom, is constantly expanding the range of offers for users. In this regard, a need arose for a universal device with which the user can connect to the Internet, use interactive television and wireless mobile communications. To do this, you will have to buy and figure out how to configure a router from Rostelecom Sagemcom f st 2804 v7 rev 1. This is not difficult to do using our tips.

The main task of routers is to distribute traffic between Internet users and those who use the services interactive television(IPTV). The Rostelecom Sagemcom f st 2804 v7 rev 1 router, in addition, is capable of performing other equally important tasks, including:

The ability to create a backup Internet channel, which is extremely important given the possibility of an unexpected power outage.
Use as a network server, for which it is possible to connect a hard drive.
A router can be used to connect multiple devices to a network printer.

The device has a classic appearance and standard settings, while you can learn a lot about the status of its operation by looking at the front panel of the device. Here you will find an on/off indicator, a DSL indicator indicating the presence of an ADSL connection, an Internet connection indicator, a WLAN indicator indicating readiness for Wi-Fi work module. There are also indicators indicating that one or more devices are connected to the Ethernet port, as well as the presence of a connection via WPS. If portable Internet was connected to the router, the USB indicator will give a signal.

On the back of the device you will find a power connector, an on/off button, and a hidden RESET button that allows you to return to factory settings, if necessary. There is also an ADSL connector and several LAN connectors. Several functional buttons and a USB connector are located on the right side panel, and their purpose can be found in the instructions for the Rostelecom Sagemcom f st 2804 v7 rev 1 modem, supplied with each device.

Connecting wires

Before proceeding to connecting the device, you must remove it from the packaging and install it in Right place. Let's move on to the connection, for which we take it out of the package and connect the power cord. If you are using a telephone connection, you must insert a telephone cable connected through a splitter to telephone line. If you use fiber optic Internet, insert the Internet cable into one of the four LAN connectors.

Let's start studying the status of the indicators on the front panel. The POWER button will indicate that the device is connected to the network, while the DSL-Link indicator will indicate that the router is receiving a signal from the service provider. As for the LAN indicator, its signal indicates correct connection cable. After making sure that the device is working, you can proceed to the basic settings of the Sagemcom f st 2804 v7 rev 1 router from PJSC Rostelecom.

Login to the WEB interface and reset all settings

Before you start working, you will have to log in and enter the online interface, for which you just need to launch one of the installed browsers. In the address bar of the browser, enter the address of the router for subsequent configuration of the Sagemcom f st 2804 v7 rev 1 router under Rostelecom, which can be found on the bottom cover of the device, although quite often you have to use a used router, which means that the sticker with the address may be missing . You can find it by examining the connection properties, but you will need the “Main Gateway” data. After entering the address, you will have to log in, and the authorization data is also on the sticker. Now that you were able to enter the settings of the Sagemcom router, let's proceed to the network connection settings and other necessary settings.

Important! The router manufactured by RTK comes with a disk that allows you to configure the device in automatic mode, but experts do not recommend doing this, since in this case a large number of “junk” connections will appear.

Direct Internet setup

To complete the setup process, connect to the Internet and final Wi-Fi settings router f st 2804 v7 rev 1, go to the “Advanced” tab, where in the WAN service section you will have to get rid of all existing connections. In a similar way, unnecessary information from the “2nd Level Interface” section is also deleted. After clicking on the “Add” button, the Sagemcom f st 2804 equipment setup wizard will prompt you to enter VCI and VPI data, and they differ depending on your location. Effective assistance will always be provided by the RTK technical support service. We apply and save the settings, then in the WAN service tab we add the newly created connection and indicate its type (standard PPPoE).

Click to enlarge

Remember! At the next stage of setting up fast 2804 v7, you will be asked to enter the user login and the key for the PPP connection. You can find them in the agreement with PJSC Rostelecom.

After entering your registration data, don’t forget to check the box next to “Repeat PPP”. Confirm the final settings of the main parameters installed router you can by clicking the apply and save button, after which you can move on to other settings. Next we will tell you how to install and configure Wi-Fi fast router 2804 v7 is for dummies, and this is also not difficult to do.

Setting up a Wi-Fi connection

To configure the configuration and universal setup of the Sagemcom Wi-Fi router from Rostelecom, you need to go to the “Main” section of the WLAN category, where you will have to enable the wireless network and multicast transmission (you will find these items without problems). In the “Security” category, it remains to specify the authentication options (WPA-PSK) and encryption method (TKIP and AES). After entering an access key consisting of at least eight characters, the settings can be saved by pressing the button of the same name. At this point, setting up the router can be considered complete, but to make sure that you have completed the simple task of setting up the Sagemcom f st 2804 v7 rev 1 router from Rostelecom, you need to reboot - in the “Management” section, click the appropriate button. After the reboot, you can start working.

Click to enlarge

Setting up for working with a TV set-top box

In conclusion, I would like to talk about how to configure a router if you want to work with a TV set-top box. This is also easy to do - just find the “Second-level interface” tab in the settings where you will have to create additional connection with new VPI and VCI values. Traditionally, a new object is created in the WAN service (a new connection is selected). In the LAN tab, the DHCP server is disabled, after which the “IGMP Snooping” and “IGMP Proxy on the Bridge” parameters are activated.