Alarm Sherkhan Magikar and instructions for use. Sherkhan alarm: overview and operating instructions. Motor protection in automatic start mode

One of the most popular anti-theft systems is Sherkhan Magikar 5. This is a versatile piece of equipment. It is compatible with all types of gearboxes. One of the advantages of the Sherkhan Magikar 5 system is its reliability and high efficiency. It uses two-way communication with the car and displays information about its condition on a key fob with a display.

"Sherkhan Magikar 5", the instruction manual for which is included with the purchase, is recognized as one of the best options anti-theft devices. What are the main points to pay attention to? This will help the advice of experienced drivers.

Key Features

The Sherkhan Magikar 5 car alarm, the operating instructions for which should be well studied by the driver before starting its operation, is installed in the engine compartment of the car. This system is compatible with diesel and petrol engines. It is considered universal.

The limitation set by the manufacturer concerns the mains voltage. The wiring must supply 12 V for power.

The message between the vehicle's systems and the user's key fob is transmitted via a two-way radio link. Moreover, the engine starts when a special signal is transmitted from the remote control. You can program a timer.

The signal transmission range is 1.5 km. However, the car should be parked in an open area where it will be clearly visible. In the presence of obstacles, the signal range is reduced.

Advantages

The Sherkhan Magikar 5 alarm, the operating instructions for which must be studied in detail by the driver, has a number of advantages. This explains its high popularity.

System reliability will be ensured by protection high level for all sensors, processor and antenna. Its installation is quite fast. Each owner will cope with this if desired. vehicle.

A powerful siren is installed in the engine department. It is quite loud and has almost no failures in operation. The advantage of the presented system is also the application of high standards in development. The creators of this alarm tested the equipment, which made it possible to bring its reliability to a high level.

The control panel with a display allows the owner of the machine to fully control all functions, as well as easily navigate the system readings. To take full advantage of the alarm, you must carefully study all the recommendations of the manufacturer.

Where to begin?

"Sherkhan Magikar 5", the instruction of which describes in detail the operation process, requires the implementation of all the manufacturer's recommendations. Installation must be carried out by a qualified mechanic. Otherwise, if installed incorrectly, the protective functions of the alarm may be impaired.

To get started with installed system you need to insert the battery into the key fob. It is included in the package, but is not installed in the remote control. This allows you to keep its charge at a high level.

After turning on the key fob, you can start working. To do this, information about the state of the car is displayed. You can manage commands, program the key fob using 4 buttons. Signals are transmitted in a certain encoding. It is unique, so no other remote can control the system. During the operation of the key fob, you can bind it again to the control unit, if for some reason the alarm system has stopped responding to its commands.

Guard mode

Compliance with the rules of work and a responsible attitude of the driver requires "Sherkhan Magikar 5". The instruction manual (autostart and other important modes which are described in detail) allows you to increase the comfort of using the machine.

To begin with, the driver must put the car in security mode. To do this, it is necessary to tightly close all the doors of the car, raise the windows. The trunk is also checked. After that, the driver presses the first button on the key fob. The locks are blocked, the starter will not work.

If the command is completed, the key fob will emit a characteristic sound. The alarm will also sound signal, the headlights will flash 5 times. The indicator will flicker. This indicates that the system is working. Flickering will occur at a frequency of once per minute. The doors are not hermetically closed, the key fob will emit 3 beeps, as well as the alarm itself. You need to monitor the inclusion of the security mode.

Creating a PIN 1 code

If for some reason the driver cannot use the key fob, the system can be disarmed using PIN 1. It is set by the vehicle owner independently from 2 or 4 digits. Each code element can be set from 1 to 4.

"Sherkhan Magikar 5", the instruction manual of which is studied by the driver, has a certain sequence of setting PIN 1. The equipment is removed from the blocking mode and the car is opened. The ignition key must be turned to the "ON" position, but the engine does not need to be started. Buttons II and IV are pressed on the key fob. A siren will sound once, and headlights will flash.

Within 4 seconds, you need to press any of the buttons. Her number will be registered to the first digit of the code. The same number of beeps will sound. The remaining digits of the code are programmed in the same way. After the procedure is completed, the system will exit this mode. The siren will sound 2 times, followed by 2 headlight flashes.

Disarming

If you turn off the security mode in a standard way does not work (the key fob is lost, not recognized by the system, etc.), it can be removed using the PIN 1 code. This is a simple procedure that was provided by the developers of the Sherkhan Magicar 5 system. The instruction manual describes this process in detail.

The driver opens the car. At the same time, an alarm siren sounds. It is necessary to turn the ignition key three times from the "Off" position. to the "On" position. The sound will stop.

Within 4 seconds, you need to turn the key as many times as the PIN 1 digit the driver programmed earlier. After entering the first code number, the headlights will flash once. Then the second number is entered. When all the code is entered into the system, the lock will be released. Otherwise, the siren will turn on again.

autostart

The driver, if desired, sets up the autorun function, which is embedded in the Sherkhan Magikar 5 system. The operating instructions for the key fob allow you to configure this mode. To do this, you need to be near the car, close all doors, turn off the security function.

The driver activates autostart. This feature will arm the machine on its own. If the driver forgets to do this in manual mode, after 30 seconds with auto start on, the alarm will block all systems.

Information about the transition to this mode will be sent to the driver's key fob. To do this, the word Passive must be on the screen.

Every 10 seconds, the device transmits a signal to arm the system. This is very convenient if the driver sometimes forgets to block the car.

Other Useful Features

A bunch of useful features has an alarm "Sherkhan Magikar 5". The instruction manual will allow the driver to select useful modes for himself.

Silent armed mode transmits an alarm signal only to the key fob of the owner of the car. The burglar thinks there is no alarm in the car. This allows you to take it red-handed.

If the driver has small children, you can turn on the safe ride mode. When the car starts moving, all doors are locked.

There is a turbo timer function. This mode allows the engine to run for some more time even when the ignition key is off and the machine is armed. This is necessary for cars with a turbine. This mode increases the duration of the equipment.

Possible malfunctions

The presented alarm system is recognized as one of the most reliable. Its popularity is explained by the mass of useful functions, which are described in detail by the documentation for the Sherkhan Magikar 5 system - the instruction manual. Malfunctions in this equipment are not excluded.

Signaling scher khan magicar a is a device for protection against unauthorized access, and is equipped with a key fob with an LCD display. The range of the system is about 800 meters.

Automatic start provided power plant both according to the timer data and commands from the key fob.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

The scher khan magicar a alarm is capable of working on cars with any type of engine, both gasoline direct injection and diesel, while the voltage of the on-board network should be 12V.

Protection of the head unit, shock sensor, call sensor, antenna unit is implemented according to IP-40 class and is designed for installation inside the car. The alarm siren unit is IP-65 protected and can be mounted under the hood of the vehicle, away from the exhaust tract and other heating elements.

The functionality of the keychain scher khan

head unit functionality

autostart of the power plant, both in tandem with automatic transmission and mechanical;
interfacing the starting system with both gasoline and diesel power units;
support for turbocharged engines;
remote start of the motor from the key fob;
autostart of the power plant every couple of hours;
programming the motor for daily start;
monitoring the launch of the sludge plant, taking into account the data of the generator and the value of the onboard network;
personal password to access the car in case of loss/damage of the key;
power output of the lock;
power output of the luggage compartment lock;
two power circuits for alarm control;
setting the type of blocking relay;
programming the automatic arming mode;
notification before turning on the security system;
in the absence of open doors, the security mode is activated automatically;
silent security mode;
two additional programmable type channels for connecting additional devices;
support for negative and positive door sensors;
negative input for luggage compartment sensor;
when the engine stops, automatic opening and closing of doors;
activation of the protective mode with warning signals and without them;
programmable notification function about one of the open doors;
Panic mode (Jack Stop);
Sensitive shock sensor of two-level type;
Signal about not turned off dimensions;

Keychain - communicator

Before you start using the scher khan magicar a key fob, you need to bring it into working position. During storage, as well as transportation, in order to avoid battery discharge, an insulating pad is installed between it and the contact block, it is this that allows the battery not to sit down.

It is necessary to remove the insulator from the battery compartment of the alarm. Bend the leash that fixes the cover of the key fob body, move the cover away from the antenna. Remove the battery.

Remove the insulator between it and the contact block. Replace the battery, strictly observing the polarity indicated on the bottom of the battery compartment. Now you can close the battery cover, the key fob is ready for use.

Important! You need to install exact time scher khan alarm key fob. This is needed for correct operation autostart of the power plant.

Sensor activation:

as soon as the central alarm LED starts to flicker, the system will protect all security zones, trunk lids of the engine compartment, doors and call sensor;
after the expiration of the 30 second period, the shock sensor is also activated;

Important! If during the installation of the scher khan alarm protection mode, a sound notification sounded three times, and an icon appeared on the key fob screen, in the form of a car with open door, then one of the security zones is not in order (trunk, engine compartment, one of the doors, trunk lid).

As soon as secured territory will be in order, the system will automatically arm it. The engine compartment is notified separately on the key fob screen, the hood sensor must be connected to the trunk lock.

To disable the security mode of the alarm, you need to press the key I of the key fob once. The scher khan system will disarm, all locks will open, once the starter and ignition system are blocked.

When disarming:

To start the engine, you must press key II on the key fob for 2 seconds. The security mode will turn on, all locks will close, the engine will turn on. When the power plant starts to work, the key fob display will notify the owner of how much time the engine will run in automatic mode. This indicator is programmable, and it can have a value: 15,25,45.5 minutes (function 2-4).

In order for the car to move, you need to open the driver's door, insert the key into the lock and activate the ignition system. This must be done within 20 seconds, if you do not have time during this time, the alarm will switch control to the ignition switch, if it is not turned on, the engine will stop.

If it was not possible to start the alarm power plant the first time, the security system will make another attempt. In the event that it fails to start the engine after three attempts, the alarm will go into standby mode. You need to contact service center to fix engine problems.

On startup:

The engine will not start if:

Important! If the engine was started automatically, then the indicator on the scher khan key fob screen will display information about the remaining operating time. The format of the displayed time will be as follows: [- min: - sec.]

To open the trunk, you must hold the button III of the remote control for two seconds, the trunk is unlocked. If at that moment the car was armed (the central lock is locked), the lock will be released and the doors will open.

In order for this function to work, you must install the trunk lid lock solenoid, and connect it to the desired output of the head unit. For more information, see the operating instructions for the security system.

In order to get information about the status of the scher khan alarm, briefly press the IV key on the key fob - communicator. All data will be displayed on the LCD screen, as will sound and visual notifications.

The temperature indicator will display cabin data. The temperature display can be set in Celsius or Fluorenheit.

Pressing the IV key of the scher khan key fob a second time within 6 seconds will show the state of the on-board electrical network (voltage). Normal voltage with the engine running should be 13.9V.

Setting the panic mode

When the N key of the scher khan keyfob is pressed for 2 seconds. the Panic mode or the Jack Stop mode (capture prevention) is activated - function 1-4 (can be programmed). If security system was turned off, it will turn on, all doors, the engine compartment and the trunk lid will work and lock. An alarm siren will be heard for 90 seconds, and the car lights will also flash.

The "Panic" mode prevents the autostart mode of the motor. When 90 seconds have passed, the security system will be activated and will remain on until the owner disables it. The Panic mode is turned off by briefly pressing the I key. The Panic and Jac kStop modes are needed to draw attention to the machine in case of danger.

Important! The Jack Stop mode should only be used in emergency cases. It cannot be classified as a standard, universally used mode, since it provides for stopping the power plant while driving, which is very dangerous. .

A short press of the I + II keys on the scher khan key fob turns on or off the sound of the alarm siren. At the same time, the key fob continues to notify the owner in the normal mode. To indicate this mode, there is special character on the communicator screen.

Valet Mode

This mode is provided for transferring the car to third parties, for example, employees of the station Maintenance. Switching on is done by briefly pressing the buttons I + III of the key fob.

VALET mode regulates the opening and closing of door locks. This can be done by pressing the I key on the portable key fob (more detailed information is in the operating instructions).

The key fob screen notifies you about the enabled Valet mode with a special symbol. To turn off VALET, hold down the keys I + III of the keyfob at the same time.

Deactivation of the two-level type shock sensor

The two-level shock sensor scher khan can be disabled. To do this, you need to press and hold the corresponding keys together for two seconds. After that, the sensor will turn off, and a corresponding notification will appear on the TFT screen of the key fob.

You need to disable this sensor when the car is placed in noisy places that can provoke it. false alarm (tram rails, a passenger inside the car, etc.).

This shock sensor is called two-level, because it works on two levels at once, which achieves a higher accuracy of operation.

When the signal received by the sensor is not too strong, the scher khan alarm siren is activated in the form of four short warning signals. The corresponding indicator is also displayed on the keyfob screen, a buzzer sound is heard. When the signal received by the sensor is strong enough, the alarm siren turns on for thirty seconds.

Note: For more information about the shock sensor, see the instruction manual.

Work with the central lock of the car when the ignition is turned on and its deactivation

A short press of the buttons I + IV of the key fob activates or, accordingly, turns off the central lock control mode, together with the ignition system. When this function is active, all doors are locked in asthmatic mode for thirty seconds after the ignition is switched off.

All doors close, just like the hood and trunk lid. Once the ignition is turned off, the protection system will turn off after a programmed interval. At this time, the keyfob screen displays the corresponding symbol.

Disabling and enabling the scher khan passive arming mode is performed by simultaneously pressing two keys II + III of the key fob. When this mode is active, the system will activate protection automatically 30 seconds after all doors are closed.

Before arming in passive mode, the scher khan system emits warning tones. After any manipulation with the door, trunk or hood, the system will start counting 30 seconds again and after the countdown is completed, it will be armed.

Setting the automatic start of the engine by timer

A short simultaneous press of the keys II + IV of the key fob activates or deactivates the engine start by timer. At the same time, a special symbol is displayed on the TFT screen of the key fob. There are two modes of automatic start of the power plant by timer.

The first of them turns on the engine every day at the same time, the other starts the engine every two hours to warm it up (or vice versa, cool the interior). Both modes cannot be used at the same time. The choice of one of them is carried out by the programmable function 2-3.

Instruction

The instruction manual contains more detailed information. Before use, it is recommended that you read the installation manual carefully.

Feedback in the alarm system allows the owner to quickly receive information about the car when intruders commit any illegal actions. Read about how to install a Sherkhan alarm in a car.

Consider a real situation: your car has sensors installed all over the area, and someone hit the fender of the car badly. The result of this incident will be an instant message to the keychain. If it also has an LCD display, you will see what part of the car is affected.

Important! Simple alarm without feedback, it would simply turn on the siren.

However, the feedback properties are not limited to this. The most advanced models constantly exchange messages between the controller on the key fob and the control unit in the car. The result is that any code grabber is useless in such a situation.

Naturally, most models of Sherkhan alarms have feedback. Due to the increased activity of car thieves, developers have to come up with more and more new ways of protection.

Separately, you need to talk about the autorun system present in the Sherkhan alarms. It allows you to warm up the engine before you get behind the wheel. While at home with a cup of tea, you can instruct the car to autostart and even turn on the air conditioner.

Alarm Sherkhan Magikar

This series is one of the most popular on the market, now the 14th model is gaining popularity, but SCHER-KHAN MAGICAR 10 still holds the palm of spectator sympathy. At one time it was a real breakthrough in the world of alarms. Even now, this Sherkhan alarm system has an impressive list of features, here are the main ones:

Slave mode - allows you to control the Sherkhan alarm from a distance.
Ability to control two cars with one key fob.
Tachometer sensor.
Connectivity additional sensors.
Improved energy saving.
Parking timer.
Possibility of blocking buttons.
Alarm.

Certainly, this is far from full list those opportunities that the Sherkhan signaling can give. One of its main advantages is its low price.. Also, one cannot ignore such a function as connecting to the CAN bus.

An adapter is built into the processor unit. It allows you to quickly and without any difficulties install the Sherkhan alarm. Modern technical solutions greatly simplify the installation process. Therefore, every driver can install an anti-theft system. True, for this you will have to spend at least a day.

As a result, it is possible to install the Sherkhan alarm even in the most difficult places of the car. Not surprisingly, it is extremely difficult for car thieves to cope with the detection of this brand's anti-theft system. At correct installation search the right wires will take so long that any intruder will simply run away.

Speaking of others specifications signaling "Sherkhan", then the range of the transmitter cannot be ignored - it is as much as 2 kilometers. In addition, a reliable encryption system is implemented here, which guarantees the stability of the signal within the city.

Attention! The coding algorithm varies from signal to signal. As a result, intellectual hacking is useless.

With each new version alarm systems "Sherkhan" of the "Magikar" series receive new functions that allow you to manage with great convenience anti-theft system. The tenth version of the key fob has such functions as:

Displays the status of the sensors installed on the machine.
Two channels of information transmission - one to remove the protective mode, the other to turn it on.
Commands are confirmed by sound and visual signals.
There is a vibration mode.
Screen backlight.
Determining the temperature inside the cabin.
The key fob also shows the status of the vehicle's battery and accumulator.

Of course, this list of functions cannot be called impressive, but it is more than enough to ensure that the car is properly protected. Much more interesting opportunities for the driver are provided by the processor unit, more precisely, it is he who is the brain of the car. The device is capable of performing functions such as:

The shock sensors included are two-level and are considered one of the most sensitive in their series. But in order for them to be able to adequately recognize the danger, it is necessary to configure them.

Alarm setting Sherkhan Magikar 10

It all starts with programming the CAN module, perhaps this is the most milestone work. First, determine the firmware number. This information is located on the end of the central unit. If you want to climate system worked together with the Sherkhan alarm - connect CN11 to the orange wire of the car network.

Attention! Some machines do not have the ability to connect to the CAN port. To remove this limitation, you will need a repair cable.

A special role in setting up the Sherkhan alarm is played by programming functions. Let's start by setting the settings for automatically closing the windows when switching to armed mode. To do this, you need to reprogram function 2-4 to position 3. After you do this, you no longer have to think about whether you closed all windows before setting the protective mode.

Be sure to take a few minutes and set the windows to close automatically. According to statistics, most car thieves use this oversight of drivers to get inside.

There are also a number of other important functions with which you can start programming the Sherkhan alarm:

To activate SLAVE mode, set function 2-14 to 2.
To disable the return to armed mode, you will need to set f1-8 to position 3. This will allow you to forget about the constant return of the system to the protected mode after disabling.
Ф 1-1 transfer to position 3. This will avoid triggering the Sherkhan alarm when you open the trunk with a command from the key fob even when the security mode is on.
An important advantage of the Sherkhan alarm system is that it can be trained. Therefore, one of the first things you should do is to start the engine on idling. In this case, you need to hold the VALET button for about two seconds. The hazard warning light should turn on and off. After that, you need to release the key, wait 5 seconds, and press it again for 4 seconds. One siren signal will announce the successful completion.

Of course, there are a number of other instructions in the manual. important points, but it is these points that will help you use the purchased device with maximum comfort.

Operation of the alarm system Sherkhan Magikar 10

Let's start with the simplest, namely arming the car, for this you will need to perform the following actions:

Turn off the engine and close all doors, including the trunk, hood, and so on.
Find the button with number 1 on the key fob, click on it. After that door locks should be locked up. This activates the starter lock.
If the installation is successful, the siren will sound, the alarm lamp will flash, the headlights will flash, the key fob will respond.

The sensors will turn on 30 seconds after the mode is activated.

Alarm Sherkhan Logicar

The Sherkhan company produces many alarms of different specifications. At the same time, she is famous for two well-known series: "Magicar" and "Logicar". There is also a UNIVERSE series, but it is not yet so popular on domestic market.

A series of car alarms "Magikar" from the company "Sherkhan" on this moment has 14 models. The lineup Logicar is more modest. There are only 6 full-fledged products and two special editions. The latest and most advanced in technical terms considered a Logicar 6i alarm. Nevertheless, the most popular version is the one in the abbreviation of which there is a unit, which will be discussed further.

Alarm "Logicar 1" from the company "Sherkhan" has similar technical properties with the device "Magikar 10". But there are, of course, some differences. For example, the radius of the transmitter is one and a half kilometers.

The loss of 500 meters affected the price, you can buy the Sherkhan Logicar 1 alarm for 5,000 rubles. The AES-128 encryption system is used to protect the signal. This makes the system immune to intellectual hacking.

The display has a high contrast, thanks to which you can easily track all the processes that occur with the car. Additionally, this device from the Sherkhan company is able to display the following parameters:

engine temperature,
battery charge,
the time the engine has been running during automatic start.

The Sherkhan alarm keychain has an ultraviolet coating and is not afraid of scratches. High-strength plastic avoids cracks and chips even when dropped. To manage there are four function keys. Programming can be carried out directly from the key fob.

By carrying out each command, the driver will receive audiovisual confirmation. There is also a function to control two cars at once. It is worth saying that this Sherkhan alarm, despite its low cost, has a number of significant advantages, including:

personal code,
disabling protection in two steps,
Turbo mode and JackStop,
work with petrol and diesel engines,
installation both on cars with automatic transmission and manual transmission.

You can set the automatic start time for the Sherkhan alarm. It will automatically run every few hours. But to make it possible this function must be activated once every 24 hours.

If we talk about the rules of operation, then they are similar to the Magikar 10 alarm. It is worth noting that all Sherkhan alarms have a similar tuning algorithm. Except for some technical nuances. If we talk about the rules of operation, then they are almost the same.

Results

The Sherkhan company has been producing multifunctional alarms for many years. affordable price. For 5-7 thousand, you can purchase a system that will be equipped with autorun and feedback. Installation is carried out both independently and in a service center.

Sherkhan car alarm from MEGA-F is very popular among car owners. Instructions for the operation and configuration of each model will be presented below.

Car alarm models Sherkhan

Car owners especially note the reliability and noise immunity of the alarms of this brand. When developing devices, we used our own software and technical developments. Combine matching high quality standards With low price succeeded thanks to cooperation with South Korean manufacturers.

Schemes and designs of this car alarm are being developed in Russia, and components are manufactured factories in South Korea.

The engine autostart function has such models as Magicar 7S, Magicar 7H, Logicar 3i, Logicar 4i, Logicar 5i, Mobicar 11, Mobicar A v. 1.0 and Mobicar A v. 2.0.

List of instructions for Sherkhan (Scher-Khan)

Instructions for Scher-Khan Logicar

Manual for Scher-Khan Mobicar

Manual for Scher-Khan Universe

Instructions for Scher-Khan Canyon

Manual for Scher-Khan Media One

Manual for Scher-Khan Taiga

Instructions for Scher-Khan Vegas

Instructions for Scher-Khan Jungle

Overview of the system by model range

Scher-Khan Magicar Series

The Sherkhan Magikar alarm line is represented by several models.

Scher Khan 7 Magicar- reliable practical alarm system equipped with two-way communication and function autorun motor. Keychain, the range of which is 2 kilometers, combines the functions of management and informing about unforeseen situations. An abundance of auxiliary functions, multi-level protection, thoughtful ergonomics and Beautiful design allow us to call it a real breakthrough in the industry. Block stream ciphers, which encode access keys, do not allow attackers to decrypt the intercepted signals. Additional protection from substitution of control codes provides time alarm function on the stopwatch of the ECU and the control key fob.

Signaling Sherkhan 10 Magikar received an updated encryption system. Crypto-resistant algorithm all information sent by the key fob to the air is encoded. Therefore, hacking the alarm by intercepting the control signal will not work. The alarm has an additional protective function. When it is turned on, protection is removed only if the time on the stopwatch of the main unit and the key fob exactly match. The device has the ability to connect to CAN-buses, which allows it to be used on modern cars without interfering with the "native" wiring.

Signaling Scher-Khan Magicar 11 has advanced software and hardware protection, capable of withstanding high-tech equipment in the service of intruders.

Auto start timer and temperature control allow you to comfortably use the machine in the most severe frosts.

Scher-Khan Logicar Series

Several models available Sherkhan Logicar. Manager signal encoded on them according to a unique algorithm Magic Code Pro 3. This allows the system to resist a common hacking method by intercepting commands.

Key fobs have contrast display, which is convenient to use in bright sunlight and at night. Bidirectional communication channel allows you to receive information about the status of security functions, engine temperature, battery charge, the state of the engine start timer.

The module for coordinating the control unit with K-Line and CAN buses ensures the compatibility of the car alarm with the on-board electronics of modern cars.

Sherkhan Logicar models have a factory code for emergency disarming. Function JackStop, which top models are equipped with, is able to resist intruders even when the car is forcibly seized. Step-by-step ignition lock is activated as soon as the car moves away from the owner.

The developers took care of the owners of cars with a turbocharged internal combustion engine - the alarm has a function "Turbotimer".

Alarms of this series have low power consumption, allowing you to use one AAA battery for 4 months.

Scher-Khan Mobicar Series

Alarm embodies everything current achievements industries that protect the car and make it difficult to hack:

compact control unit;
many control zones;
built-in shock, movement and tilt sensors;
signal encryption.

The radio exchange between the ECU and the alarm key fob is carried out at a frequency of 868 MHz, which ensures the noise immunity of the channel with a long communication range.

Manufacturers equipped Mobicar function for accident prevention. If the accelerometer of the control unit detects a sharp deceleration of the car (more than 20 km / h per second), it turns on the car alarm. This allows other road users to react to the situation and take action to prevent an accident.

Autostart system adapted for engines of any type and mounted on a car with ignition keys and a start-stop button. The control unit is equipped with an adapter for connecting to the K-Line and CAN buses of modern cars. Engine auto start works by timer or by cooling motor to the set temperature. This takes into account the voltage of the on-board network.

Scher-Khan Universe Series

Alarms "Sherkhan" Universe 1, 2 and 3 able to protect the car from intruders, regardless of the distance to the owner. They are equipped with a GPS module that transmits the location of the car and registers the movement of the car with the log stored on a remote server.

Additional level of protection in the form immobilizer on Scher-Khan Universe 2 is able to prevent car theft even when taking possession of the keys. If there is no key fob signal, the engine dies after 20 seconds after launch. This will not allow intruders to escape, but will allow them to drive off to a distance that is safe for the owner.

Universe alarms have six control methods: alarm key fob, mobile app, Personal Area on the website, a call to the service number and the cabin module "Commander".

Scher-Khan Canyon Series

An alarm that has not lost its relevance, which appeared on the market in 2009. Two-way communication with a key fob-communicator, radio signal encryption and audiovisual confirmation of commands is also used on all modern models.

Scher-Khan Media One Series

Alarm 2010, which was first among domestic systems was radio module installed working at 868 MHz. The color OLED display installed in the key fob made it possible to visually demonstrate the execution of commands and the state of the armed mode using animated images. The alarm key fob is equipped lithium battery, which can be charged from the mains or the car's on-board network using adapters.

Scher-Khan Taiga Series

Two way alarm designed for commercial transport. It can be installed on buses, trucks and other equipment with an onboard voltage 24 volts. Sherkhan Taiga entered the market in 2010. It has all the security functions that were relevant at that time: protection against robbery with imitation of an engine malfunction, an accelerometer, signal coding, automatic control vehicle locks.

Security system capabilities

Car alarms "Sherkhan" are controlled via secure radio channel 868 MHz, which ensures the connection of the main module with key fobs at a distance up to 2 kilometers. Model management with GSM modules carried out via radio and the Internet. In the latter case, the remoteness of the car from the owner does not matter.

Alarms are compatible with modern K-Line and CAN buses, which allows you to install them on the most latest models cars. The control module, located in the cabin, controls the door locks, the ignition system and the fuel supply.

The second level of protection is provided by a siren, which is located in the engine compartment. It is able to scare away intruders, drawing the attention of passers-by to an attempt to enter the salon.

The alarm key fob is a multifunctional unit with 4 buttons and display. Regardless of the device model, key fobs have the following basic functions:

protection against interception of radio codes;
synchronization of readings between devices;
two-channel control;
battery level indicator;
battery charge icon;
talkback signal strength indicator;
programming alarm functions by pressing buttons.

Alarm Sherkhan principle of operation

Functionally, the alarm system is divided for security and control units. The security unit is mounted in the car interior and reacts to unauthorized attempts to enter the interior and start the engine. For this, it is equipped shock and displacement sensors and a channel for receiving data with ECU and door opening sensors.

The alarm module is connected to the on-board computer, engine control unit and central locking by wires or via CAN and K-LINE buses (if any).

The control block is presented in the form of a keychain and in some models "Sherkhan" can be duplicated by a cabin control module. The alarm key fob performs radio exchange with the control unit. Teams are sent in encrypted form, which excludes the possibility of their substitution and interception.

Instructions for use

The instructions supplied with the Sherkhan car alarms describe in detail the procedure for installing and configuring the control module.

Do-it-yourself Sherkhan alarm connection

Before connecting the car alarm, you must decide on a location main parts of the kit.

CPU is placed in a hidden place in the cabin and fastened with plastic clamps or self-tapping screws. It must not be installed under the hood where it will be affected high temperature and the external environment.
Antenna needs to be fixed at the top. windshield at a distance of at least 5 cm from metal parts body. The wire from it can be hidden under the rack trim.
Siren must be placed under the hood so that dirt and water do not get into its socket. The place of its installation must be such that it cannot be reached without opening the hood.
limit switches on the hood and trunk must be protected from water and positioned so that in the closed position they have 5 mm of free play.
shock sensor rigidly attached to the body in the cabin. It should be mounted so as to leave access for adjusting the sensitivity.

Wires are laid in places where regular wiring passes. Special attention should pay attention to the reliability of the power supply.

The performance of the car alarm and the safety of the car depend on the quality of the contacts and the integrity of the wires.

Step by step installation process

An example of installing Scher-Khan on a car is given in
video.

You can learn how to turn off the alarm and download instructions for installing and configuring Sherkhan at the following links:

Setting up the Sherkhan alarm

After connecting Sherkhan, the owner can adjust her modes in accordance with own preferences. Sensitivity setting shock sensor carried out with the control knob. Clockwise rotation increases sensitivity, counterclockwise decreases sensitivity.

On a car with a manual transmission, it is imperative to turn on the “backup” mode, which prevents the engine from starting automatically when the speed is turned on.

Keychain binding

To write the key fob code it is necessary to remove the security mode and open the salon door. The factory settings of Sherkhan do not require a PIN code to bind the key fob. If desired protection can be improved by including a four- or two-digit code request.

Setting the key fob using the cursor method

To bind a device you need to do the following:

turn the ignition on/off three times within 4 seconds (success is signaled by a single flash of light external devices);
press within 4 seconds I button on a keychain;
successively prescribe the second and third key chains not exceeding a four second interval.

Instructions for turning on the timer

Engine start timer switched on with a short press buttons 1+4. At the same time, the display shows timer label. The start time is set by pressing the buttons in accordance with the instructions for Sherkhan. If you do not set a specific start time, the motor will start at 2 hour intervals.

Alarm modes

Car alarm "Sherkhan" provides several operating modes:

Automatic and manual arming with a request for a personal code to disable and without it.
Guard with engine running(winter mode with engine warm-up).
Autorun mode with automatic starting of the engine after a certain interval or a predetermined time.
Robbery protection with simulated engine failures.

The meaning of the key fob keys and icons

Button 1

Arming, searching for a car, blocking the engine start and disabling the alarm mode.

Button 2

Disabling the security mode, opening door locks, duplicating the commands of the first button. If you do not know how to turn off the alarm - press the second button.

Button 3

The button responsible for activating the key fob display.

Button 4

Pressing this button starts diagnostics of the state of the security system.

Instructions for setting up autorun

To start the engine it is necessary to hold button 2 on the control panel for at least 2 seconds. Using the buttons on the control panel, the frequency of starting the motor is adjusted. Auto restart is possible after 2, 4 or 8 hours.

Also possible temperature dependent engine start in the cabin. If in winter the temperature drops below -15 or -25 degrees, and in summer it rises to +60, the Sherkhan alarm module will automatically start the engine.

The order and number of button presses for different alarm models is different.

Video on setting up an alarm

The details of setting up the Sherkhan car alarm can be found in
video.

Sensitivity adjustment

You can adjust the sensitivity of the sensor using the regulators installed on it. The first is responsible for setting the warning zone, the second - the alarm zone.

How to decrease the sensitivity level

To reduce sensitivity encoder rotate adjustment knobs counterclock-wise. You can determine the result by lightly hitting the body pillar. If necessary, you can turn the knob one more turn. After completing the adjustment, be sure to check the operation of both control zones.

Car alarm faults Sherkhan

Sensor failure due to damaged wires.
Impossibility of remote control due to low battery or reset.
Disabling the alarm due to an open circuit in the power supply.
Continuous turning on of the siren due to a break in the power supply wires of the unit.

If the key fob does not respond

When the alarm does not respond to key fob key presses, it is necessary to perform the following actions:

check charge battery;
check work alarm from a spare key fob.

If the battery is in order and the control unit responds to the second alarm key fob, you must contact the service to repair or flash the faulty key fob.

Advantages and disadvantages of car alarm Sherkhan

The advantages of Sherkhan alarms are high reliability and a wide range of functions at an affordable price. Additional channels in the control unit allow you to implement remote control seat heating and engine start. The disadvantage of Sherkhan car alarms without an immobilizer is that they cannot block the engine when the hood is broken. Therefore, when installing such devices, it is necessary to install separate block immobilizer.

Author

For 15 years I have been repairing various types of cars, including brands such as VAZ, UAZ, Chevrolet, Mazda, Kia and many others. Everything related to the box, engine or chassis. You can write me your question below in the comments and I will try to answer it in detail.