How to properly glue meter-wide wallpaper. How to glue meter-long wallpaper: everyone should know this. Step-by-step instructions for covering walls with wide wallpaper

Carrying out independent repairs and finishing of an apartment is fraught with not only the complexity of the work, but also the lack of certain skills on the part of the performer. Many owners are interested in how to glue meter-long wallpaper so that the pattern fits correctly and there are no visible joints left on the wall. The process of gluing wide wallpaper needs to be considered in more detail.

How to hang wallpaper alone (click to enlarge)

What types of wide wallpaper rolls are there?

Pasting any type of wallpaper is always an entertaining and responsible activity. Professionals glue products alone, but in the case of wide canvases you may encounter difficulties. To solve the problem and glue meter-long wallpaper, one needs to find out the nuances of preparing the walls, choosing materials and appropriate tools.

The proposed options themselves can be of two types:

vinyl on non-woven fabric;
non-woven for painting.

Non-woven fabric is a thin non-woven base that is stronger than paper wallpaper. The advantage of non-woven products is their reliable gluing to the wall. In the future, gluing wide wallpaper on non-woven fabric without properly preparing the walls will lead to problems arising at the stage of changing the finish.

Non-woven wallpaper is designed for further painting, while another type - vinyl, is produced with a pattern using polyvinyl chloride. Images can be textured and perfectly hide uneven walls. High-quality wide vinyl wallpaper is very dense and when smoothing the canvas, you can be sure that it will not be erased, which cannot be said about ordinary paper analogues.

You can select wallpaper from the table (click to enlarge)

Domestic and foreign manufacturers produce wallpaper 100 cm wide in order to make gluing the surface of walls indoors faster.

The importance of wall preparation: working with drywall

Before gluing wide wallpaper, it is necessary to thoroughly prepare the walls. All surfaces can be divided according to the base material:

drywall;
concrete wall.

In the case of gypsum board, if we are talking about the construction of new cardboard walls, it is important to carry out the preparatory work once and in the future, during repeated repairs, the owner will only need to remove the old wallpaper in order to stick a new one. Before gluing wide wallpaper onto drywall, first putty it with the starting mixture, then with the finishing mixture. It is necessary to wait until the first layer dries, and then apply the second. First, the drywall seams are glued with sickle tape, and all protruding screw heads and gaps are carefully covered.

The final stage of working with drywall is cleaning the surface using fine sandpaper. After this, non-woven wallpaper is glued in compliance with all the rules.

Watch the video to understand better:

Wall with concrete base: how to prepare

If the base is a concrete wall that was previously covered or painted, you must perform the following steps:

completely remove old wallpaper or paint. If difficulties arise at this stage, you can use special chemical compounds that allow you to quickly and effectively remove old paint and putty;
the next stage contains the main rule: seal all visible holes on the surface, as well as solve the problem with wall defects. This can be achieved using a good putty mixture;
The third phase of the work will be covering the entire wall with putty, and it is not necessary to achieve a perfectly flat plane: when gluing high-quality meter-long wallpaper, all irregularities will be hidden under the structure of the pattern. After the putty has completely dried, lightly sand the walls;
The final step will be to treat the wall with a deep penetration primer. Thanks to this substance, the wallpaper will not absorb much glue, but will dry out gradually. Using a wide brush, apply primer to all walls and wait until dry. Next, you can begin to resolve the issue of how to properly glue meter-long wallpaper.

Some craftsmen, when working with unprepared walls, use an additional color scheme that matches the color of the wallpaper. They add it to the primer and go over it with a second coat to give the walls a background before gluing.

Find out more from the video:

Meter-long wallpaper on non-woven fabric - how to glue

In order for the glued products to adhere firmly to the wall, it is necessary to follow a certain technology when working. To get started, prepare your tools:

roulette;
construction knife or scissors;
a bucket for diluting glue;
container for pouring and convenient use of glue;
wallpaper adhesive composition;
wide brush;
plastic spatula;
simple pencil.

Use special tools for wide wallpapers (click to enlarge)

Before gluing wide wallpaper correctly, you need to mark a cut on the wall in order to know where to apply the canvas. We take a tape measure and measure from the beginning of the wall exactly as much as the width of the wallpaper. We draw a line from the ceiling to the floor with a simple pencil. There is no need to mark the entire wall at once; it is optimal to make marks immediately before gluing the wallpaper.

The next step will be diluting the adhesive: pay attention to the manufacturer's instructions on the ratio of water and powder - the main thing here is to maintain the proportions and not make the glue too liquid or thick. As a rule, after dilution, the manufacturer recommends letting the solution sit for 5 minutes and then start working.

By watching the video you will learn even more:

Pour the finished mixture from the bucket into a flat container for convenience. Before you begin, cut the fabric from the roll. The length of the canvas should be 10 cm greater than the height of the wall. Lay the wallpaper on the floor and use a utility knife to make a cut.

Important: if gluing occurs on a floor where there is already finishing, use plastic film to prevent glue from getting on the floor.

Using a wide brush, apply glue to the section of wall that was previously marked with a pencil. It is advisable to do this quickly to prevent the glue from drying out. Many experts also recommend applying glue to the non-woven base for better adhesion.

We apply a piece of canvas to the wall coated with glue. This is done in this order:

bring the canvas to the ceiling itself and carefully apply it, pressing;
Gradually press the entire surface of the cut against the wall with your hands;
when the cut stays on the wall on its own, take a plastic spatula and start removing bubbles and wrinkles;
It is possible for one person to glue meter-long wallpaper, but it will be difficult, so involve your household in the action: have an assistant hold the canvas from below, lifting it slightly to expel the air. Another person smoothes the cut from the center to the edges, carefully straightening it.

Having dealt with the first glued sheet, move on to the next one, following the steps in the same order.

In addition to the basic process of pasting walls, there is also a list of nuances and useful tips that you need to listen to in order to achieve a positive result:

Avoid drafts in the room and try to ensure optimal temperature conditions during operation;
if the procedure is carried out in winter, make sure to glue the cuts in these areas before the radiator begins to heat up;
Most adhesives are universal, but if you are interested in the question of how to glue meter-long non-woven wallpaper correctly, then it is best to choose a special glue for such a base;

Useful advice for gluing in the kitchen:

Important: It would be appropriate to use stepladders or stools in order to more accurately apply the canvases to the wall.

If you make a mistake in the case of uneven placement of the cut on the surface, the situation can be corrected within 10 minutes, while the glue has not yet set. To do this, you need to use a spatula on the glued canvases, slowly straightening the wallpaper along the wall, avoiding tears and abrasion;
To glue meter-long wallpaper end-to-end, place the next cut overlapping the previous one. After pressing, run the knife along the seam, retreating the number of centimeters that was covered by the new cut. This way, the extra strip of wallpaper will be removed, and the canvases themselves will not have a visible seam.

The main advantage in deciding how to glue wide wallpaper is the fast pasting of the surface, compared to standard products. To finish a space 10 m long, you need to cut and glue a meter roll of canvas the same number of times. In the case of narrow-width paper wallpaper, the time and effort required increase by one and a half times.

Show your imagination when decorating the walls and involve all family members in the process - the result will please everyone, and the process will unite the family and speed up the work.

Recently, on the shelves of construction hypermarkets and in the virtual windows of specialized online stores, you can increasingly see wide meter-long wallpaper for sale. They differ from rolls of standard sizes by almost 2 times, having a width of 1 meter, or more precisely, 106 cm.

What are their main advantages when compared with their usual analogues and how to choose them correctly? And most importantly, how to properly glue wide wallpaper? After all, over the years, many of us have become accustomed to gluing standard rolls half a meter wide. So let's move on to look at these interesting questions.

Unlike standard ones, it is better to glue wide wallpaper together

Detailed instructions: how to glue meter-long non-woven wallpaper

The process of gluing meter-wide non-woven wallpaper includes several main stages. Let's look at each of them in more detail and find out how to glue meter-long wallpaper:

Preliminary preparation of the wall. We remove the old wallpaper and remove any remaining unevenness in the form of paper and other residues. The advantage is the fact that wallpaper with a non-woven base is not afraid of minor surface irregularities, chips and scratches on the walls and partitions of the room. In addition, if the prepared working surface is slightly rough, this will be rather a plus before starting work.
Then you need to close all windows, vents and other sources of drafts. It is recommended to close even technical ventilation openings. Moreover, opening vents and windows is allowed only after the glue has completely dried, which can take from 24 to 72 hours. It is also recommended to turn off the power for a while, dismantle the sockets, remove various fasteners from the walls: nails, screws, etc.
Preparation of adhesive solution and wall surfaces. Be especially careful when purchasing adhesive as it must match the type of wallpaper. The process of preparing the solution itself is not complicated and even a non-professional can easily do it with their own hands. Pour water into a pre-prepared container and gradually add dry glue, while stirring with a small stick or other available means. Read the glue instructions: it says how long it will take for the solution to harden sufficiently and be ready to start work. As a rule, you will not have to wait more than 10-20 minutes. Once the glue is ready, you need to mark the wall. Considering that this is non-woven, and, moreover, meter-long wallpaper, it is necessary to take into account that they will need to be glued at the joint - this is exactly what will be correct. As reviews and expert advice say, it is better to start gluing from the window, moving deeper into the room. As for the first sheet, align it vertically with a plumb line, and draw a line with a regular pencil using a long meter ruler.
The next stage is cutting wallpaper for gluing. Leave 10 cm at the top and bottom as a margin. After completing the work and completely drying, you can remove excess (left in reserve) sections of wallpaper using a previously prepared sharp knife.
Let's start gluing. Having successfully completed all the previous instructions, you need to move on to the next stage of work - directly to gluing. Before applying the glue itself, you need to mix it again. After this, we proceed to applying the adhesive layer. This is done using a wide wallpaper paste brush. As you know, non-woven wallpaper is not coated with a layer of glue. It is enough just to apply it to the surface of the wall. After applying a layer of adhesive solution, carefully smooth the wallpaper. This stage must be performed efficiently and conscientiously, taking into account that you are gluing wide meter-long wallpaper. If necessary, straighten the wallpaper, level it and get rid of air bubbles using a special plastic spatula for leveling wallpaper. Smoothing can also be done using a plastic comb or roller, downwards and away from the middle of the wallpaper sheet. Remove excess glue with a small sponge or rag.
We continue gluing the remaining cut sheets. This needs to be done at the joint. If necessary, you need to accurately select the pattern so that it matches the adjacent sheet of wallpaper.

Related article: Empire style in the interior

Due to the larger width of the roll, gluing work is done faster

Advice from the experts! Since meter-long wallpaper is much wider than standard wallpaper, it is recommended that two people hang it together. Therefore, before starting work, find yourself an assistant - it will be much easier to work with him.

Pros and cons of gluing meter-wide wallpaper

Before gluing 1-meter wallpaper, it will be useful to learn about their advantages, as well as some disadvantages. The fact is that only after a detailed study of the pros and cons of gluing wide canvases, you will have a more or less accurate idea regarding the choice in favor of one or another option.

Advantages

The advantages certainly include the following points:

After the repair, fewer joints remain on the wall.
The time for preparation and execution of work is reduced. After all, even despite the fact that meter-long wallpaper has O The thicker thickness compared to standard analogues is still easier to measure and glue 15 sheets than 30.
You can save additional money, since the price of one tube of wide meter-long wallpaper, although slightly, is still lower than that of two tubes of standard-width wallpaper.

Despite the apparent complexity, it is quite possible to do all the work yourself

Disadvantages of wide canvases

Of course, one cannot fail to mention some disadvantages:

Difficulties in adjusting the canvas of both vinyl and non-woven wide wallpaper to the adjacent, already pasted canvas, in contrast to traditional analogues.
Difficulties with gluing alone. Unlike rolls of regular 53 cm width, working with wide rolls requires an assistant.
The need for better preparation of the wall surface before gluing, in order to better fit one sheet to another.

Today, non-woven wallpaper is extremely popular among finishing materials. This is explained by the fact that they are reliable, comfortable, and have a variety of textures. There are 2 types of them: non-woven based and made from pure non-woven fabric. They also come with or without a pattern, intended for further painting.

Non-woven wallpaper is very easy to glue; it does not stretch, tear, or shrink.

The advantage of this wallpaper is that it is a fairly easy pasting process that does not require special skills; it does not stretch, tear or shrink.
They hide all the unevenness of the walls well and do not crack when cracks appear in them. All this is achieved thanks to the non-woven base; it glides easily over the surface, and all the work can be done even without assistants. An undoubted advantage is that wallpaper without a pattern can be painted quite often (up to 10 times), thereby updating the interior of the room.

Read also:
Right.

Manufacturing Features.

How to quickly and correctly assemble a bed - read.
How to glue non-woven wallpaper

Return to contents

Preliminary stage - surface preparation

First, count the rolls of wallpaper. To determine their number, measure the width and height of each wall. When calculating, add a few centimeters to the length of the sheets as a reserve. You can draw a plan on a piece of paper.

Please note that you need to buy rolls with the same batch number on each package. If the wallpaper has a pattern, make sure it is identical everywhere.

Wallpaper is carefully glued only to smooth walls.

Be sure to level the walls. Wide wallpaper does not fit well on rough walls, this can affect the quality of the joints;

remove all sockets. Insulate the wires to prevent moisture from penetrating into the boxes. Treat the surface of the walls well with a primer and dry.

For gluing you will need the following set of devices:

roulette;

level;

roller with long pile;

containers for diluting glue and water;

a narrow metal spatula and a plastic spatula with a soft edge for rolling sheets;

brush for smoothing glued panels;

cutting knife;

special mesh for removing glue from the roller;

foam sponge;

pencil;

film.

Return to contents

Gluing non-woven wallpaper

Before gluing meter-long non-woven wallpaper, make markings. This wallpaper has a good edge, so they are glued end to end. You need to mark the walls from the corner. In them, the sheets are glued overlapping. If the width of the wallpaper is 1.06 m, leave 1 m on both sides of the corner.

Draw a vertical line at your height level. Mark 1.06 m from the drawn line with a tape measure. All walls should be marked in this way.

Place the film on the floor and lay the roll face down on it. If the sheets have a pattern, take it into account when cutting.

If the sheets are without patterns, measure the height in the place where you will glue the sheet, adding 10 cm. Bend the roll onto the rolled out part so that the edges coincide, then the bend will be even. Run your hand along the bend, then cut. Prepare wallpaper for all walls in the same way.

Wrap the wallpaper loosely in rolls, with the front side on the inside. Following the instructions on the package, dilute the glue in the required amount. You need to use glue intended for non-woven wallpaper. First, pour water into the container, and then add glue little by little, mix well so that lumps do not form, which will not work. Leave the glue to swell for a while. Use a special mesh to remove excess glue; it is inserted into the container.

Dip the roller, roll it over the mesh, and then apply it to the wall surface, designed for one panel. The peculiarity of non-woven wallpaper is that they are glued on top.

Take the wallpaper by the edge and apply it to the surface. Gradually lower the canvas down and smooth the wallpaper with a brush or roller, starting from the middle to the edges. If you use a plastic spatula, be very careful not to damage the canvas.

Make sure that the wallpaper is pressed well to the surface without forming bubbles or folds.

After gluing 2 or more sheets, roll each subsequent seam with a roller. Carefully cut off the part that remains below. It is advisable to do this when everything is dry. Please note that the baseboard will have to completely cover the wallpaper. You can install a border at the top to suit your taste.

Return to contents

How to glue wide (meter-long) non-woven wallpaper

Meter wallpaper is very popular due to several of its features. Compared to regular wallpaper, the advantage of meter-long wallpaper is easy gluing, a small number of seams, and reduced costs when purchasing it. In terms of price, meter-long wallpaper is cheaper than 2 small ones.

Return to contents

Pasting corners with non-woven wallpaper

First you need to prepare the corner. This is done during the putty process: the corners are equipped with plastic corners, they are attached to the walls with putty. When everything is dry, the surface of the walls will be ready for further gluing.
When gluing wallpaper to a corner, coat the wall and plastic corner well with glue.

It is better not to glue the whole canvas into a corner, because the wallpaper will overlap. Most often, the corners are not ideal, so the wallpaper wrinkles there. To avoid this, try to make a slight overlap on the nearest wall. Best of all - up to 2 cm. The next panel is glued on the adjacent wall, gluing it to the corner with an overlap. Then cut off this “tail” with a knife, focusing on the vertical angle.

That is, under this strip, up to 2 cm of strip from the adjacent wall will be glued, and this sheet will rest against the edge of the corner.

Meter wallpaper remains a curiosity for most domestic users, although they differ from ordinary roll products only in their width of 1 meter. Thanks to this feature, finishing work takes less time and effort, but the task becomes more difficult if you have to work alone. In this case, it is important to know how to glue meter-long wallpaper for one person.

If we talk about the positive aspects of this material, the following especially stand out:

A small number of joints. To finish one room, you will need half as many strips, so you will have to worry less about the correctness of the joints. It also gives the impression of a monolithic coating.
Speed of work. Wide fragments cover a large area; it is easy to calculate that it is easier to glue three strips than six.

But there are also some disadvantages:

The material requires a perfectly prepared base.
High consumption. Wide wallpapers are more expensive, so if a small strip is not enough, you will have to pay for a whole additional roll.

On a note! Typically, wide wallpaper is applied by two or three people, but you can do it yourself if you work quickly.

If a person has already had to glue ordinary half-meter wallpaper, then he can cope with meter-long canvases

Preparatory work

Before gluing wide wallpaper, you need to carry out a number of procedures, which include preparing tools and surfaces, as well as calculating the required amount of material.

How to calculate wallpaper footage

Correctly carried out calculations will save money and also save you from making a second trip to the store or ordering additional material at home. The first step is to calculate the perimeter of the room. To do this, you need to measure the length of adjacent surfaces and multiply the result by 2. Let's say one wall is 3 m long and the other 4 m. This means that the perimeter of the room is 14 m. Since we are talking about meter-long wallpaper, it will take 14 strips to cover the wall.

Now you need to find the largest distance from the floor to the ceiling and multiply it by 14. For example, the height is 2.5 m, multiply by 14, it turns out 35 meters. This is the minimum amount of material. If the room has windows, doors, a balcony, etc., it is better not to subtract their dimensions during calculations, this way there will be a supply of material left.

Some people think that it is not necessary to tape off the area behind the furniture, since the wallpaper will not be visible there. Here the decision is only up to the home owner, but it is important to remember that when rearranging, bald spots will appear on the wall. A bulky cabinet that won’t move until it’s renovated doesn’t need to be covered with paper.

When calculating the amount of material, it is recommended to take into account 1-2 rolls of stock. They may be required not only during pasting, but also after. If there are children or animals in the house, then damage to the wallpaper is a matter of time. So that later you don’t have to look for the same ones to replace the area or completely re-glue, it is better to immediately purchase a supply.

Surface preparation

When gluing meter-long wallpaper, the most difficult stage is the preparatory stage, as is the case with any other types of these products. If the apartment is undergoing major repairs or finishing after the object is put into operation, then all of the following measures must be carried out while working on the ceiling. So, you need to do the following:

Wallpapering should only be done on clean and well-primed walls.

Remove the front panels from all sockets and switches and carefully seal the resulting holes.
Remove all fasteners from the walls: screws, nails, dowels, and so on.
If there is coating on the walls, you need to remove it. As a result, not even a small fragment of finishing material should remain.
Check if the walls are level. To do this, apply a building level to them at different points.
For minor distortions, it is enough to use finishing putty; for serious distortions, plastering may be required.
Wait for the material to dry and sand the area.
Before gluing wallpaper on the walls, it is necessary to treat the coating with a primer. This material will increase adhesion and save on glue. The drying time for the compositions varies, but usually it is several hours.

Required Tools

To carry out the work you will need:

wide brush, roller or brush for applying glue;
container and construction mixer for preparing the composition;
ruler, level, stationery knife, marker or pencil;
rubber spatula and roller for ironing wallpaper;
a rag to remove glue residue.

To paste walls with wide canvases, a generally accepted wallpaper tool is used.

Pasting

Step-by-step instructions on how to glue wallpaper alone:

Prepare the adhesive according to the instructions on the package.
Use a level and a pencil to mark the top border.
Fold a small part of the strip to form a corner.
Place the material against the wall and press firmly.
Iron the glued wallpaper with a rubber spatula, moving from the center to the edges. You can also use a roller to get the air out.
Using a metal spatula and a utility knife, trim off the excess.
Inspect the strip and make sure it is completely stuck to the base.

Damp wallpaper is difficult to cut, so in some cases you will have to wait.

Regardless of the width of the canvas, the room is covered according to the same pattern

Docking

The glued sheet must be butted against the adjacent one. If there are pictures on the wallpaper, then it is important to adjust their height. During gluing, the strip must be smoothed at the same time and ensure that it does not move away from the previous one. In this case, it is forbidden to stretch the material to achieve joining; after drying, it will shrink back and there will be a gap.

The joints are rolled with a special roller; an attempt to forcefully pull the sheets together at the seam will lead to the appearance of a gap after drying

On a note! If you need to glue non-woven wallpaper, you can move it along the surface for 10 minutes after pasting. If you use another type of wallpaper, then you should choose an adhesive without additives that accelerate drying.

If the joint does not work, you can overlap the wallpaper and then cut off the excess using a utility knife. The remaining unglued side should be coated with glue and ironed with a rubber roller.

Wallpaper joining with overlap and trimming

Pasting in hard-to-reach places

Now let’s talk about how to hang wallpaper for one person in the corners, behind the radiator, above the doorway. It is better to arrange them at the main stage of pasting. To do this, leave a small overlap (about 2 cm), which will overlap the adjacent wall. To hang wallpaper behind and under the radiator, you need to cut the material into small pieces and select a pattern. After this, the pieces are glued to the wall, as described above.

A simple way to cover the wall behind a radiator

Another difficulty that you will have to face is covering the area with sockets. If at the preliminary stage the front panel was removed and the voltage was turned off, then you just need to glue the strip, not paying attention to the hole, and then use a knife to cut through the wallpaper. If you get uneven edges, that’s okay, the front panel will hide these imperfections. In the case of door jambs, it is necessary to glue the sheet with a margin of 5 mm. After smoothing, the excess length is trimmed or covered with a casing.

It is advisable to cut holes for sockets and switches after the canvas has dried

Before working with meter-long wallpaper alone, it is recommended that you familiarize yourself with some expert advice:

There should be no drafts in the room, a suitable temperature range is from +5 to +25 C. In addition, it is also quite difficult to work in damp rooms, so at the preparatory stage it is necessary to ventilate and carefully close the room.
If gluing is planned in the cold season, then it is better to turn off the radiator. If it is not possible to do this, it is recommended to reschedule the work while the central heating is turned off.
Most adhesives are universal, but when choosing, it is better to ask the seller what type of products this composition is suitable for. This will help fix the wallpaper on the surface better.
If immediately after pasting, defects are noticed, in particular uneven joints, it is necessary to lift the canvas with a spatula and correct the problem. It is very important not to pull the stripes.
After gluing, sometimes difficulties arise with cutting the material. To do this, use a stationery knife or scissors. You need to press the excess part with a spatula and run a knife along the markings. In the case of scissors, you need to bend the edge along the markings and cut it off.
If there are uneven cuts at the top or bottom of the wall, you should not try to fix it. As practice shows, this will lead to bad consequences. It is better to purchase skirting boards that will hide imperfections.

If ceiling fillets are not provided, then the perimeter can be cultivated using a frieze

“Repairs cannot be completed, they can only be stopped!” wrote M. Zhvanetsky in one of his miniatures. Is it really that bad? How to glue meter-long wallpaper on your own so that neither the quality of work nor family relationships are affected, and the repair does not take centuries? Let's figure it out.

Meter wallpaper - a sign of the new time

In our family, replacing wallpaper has always been a common task. Everyone took part: someone took out excess furniture, someone cleared the walls of old paper panels, someone marked and cut what should replace them. Then they started spreading the paste, pasting, combining patterns, etc. This is where the fun began. Not without mutual complaints: sometimes the leaves and flowers don’t fit together, sometimes the overlap is small, sometimes large, or even too short in length. It’s no joke, with the standard width of Soviet wallpaper being 53 cm, on the walls of an 18-meter room it was necessary to cut and glue more than 30 pieces of 2.5 m in length.

Today, a lot has changed, including in the field of apartment renovation. Foreign manufacturers, whose products are now abundantly represented on our market, offer many options for wallpaper, and this applies not only to colors, patterns, materials from which they are made, but also to the length and width of the panels. For example, the Italians today produce rolls of 106 cm and 70 cm, the Belgians - 90, 100, 140, the French - 70 and 90 cm. Our enterprises still maintain the standard of 53 cm.

Specialists involved in the wallpaper business have long dubbed overseas specimens non-standard, wide or simply meter-long wallpaper. Neither give nor take, a kind of sign of a new time.

Most wide wallpapers have a non-woven base. However, there are also paper, bamboo, and fabric ones. Meter sheets can be light or heavy; for each type you need to select the required type of glue indicated by the manufacturer on the packaging. Please note that if you have not achieved perfection in gluing walls, then you should not purchase glue that hardens within a few minutes; this is only for professional craftsmen.

The site’s site masters have prepared a special calculator for you. You can easily calculate the required amount of wallpaper.

How to glue meter-long wallpaper - pros and cons

If you decide to update the wallpaper in the room, then, first of all, try to approach the choice of new home design as responsibly as possible. Of course, there are now a huge number of retail outlets, but it would be better to go somewhere where you will have the opportunity to examine the banner at a special stand, unfolded and from a great distance. It’s no secret that on a roll and on the wall, as they say in Odessa, these are two big differences!

By the way, remember that vertical stripes will visually increase the height of your room, and horizontal ones will seem to push the walls apart. Therefore, attentiveness and attentiveness again! It’s better to weigh and count everything again before purchasing this or that type of wallpaper.

If we talk about the positive aspects of wide rolls, the main one is a significant reduction in the number of seams, which creates the so-called “seamless” effect. How is it achieved, you ask? The answer is simple: if the mentioned 18-meter room required 30 or so standard half-meter canvases, then the wide ones will need half as many - there will also be fewer joints, which means they will not be so conspicuous.

It is probably unnecessary to say that applying glue to 15-16 tapes will take significantly less time than the same operation with three dozen. And in terms of physical effort, it is incomparable. And the procedure for pasting walls with such panels is generally no different. And, by the way, many who decide to make repairs will probably be attracted by the fact that meter-long wallpaper, as it turned out, can save money on your budget. The fact is that in most cases, one wide roll is still cheaper than two standard 50-centimeter rolls. In addition, non-woven wallpaper will also be the most durable.

It would be dishonest to you, having talked about the advantages, to remain silent about the difficulties of working with meter-long canvases. But they still exist. So, wide wallpapers assume that they are glued to perfectly flat surfaces, since any flaws or unevenness will not allow you to achieve a perfect fit between adjacent panels. Let me remind you that this is their main “seamless” advantage. But in principle this can be solved, fortunately there are more than enough options.

The large width of the roll is fraught with another danger - you may not have enough of the last full tape, just a couple of centimeters wide. Collecting a fragment from pieces? This is hardly a solution. You'll have to buy a whole roll. With standard rolls it is easier to adjust the number of panels to the width of the walls. Well, and one more point, which, however, can only be called a minus with a stretch. It’s quite difficult to hang meter-long wallpaper alone. You will definitely need an assistant. I don’t know about you, but for our family this is not a question - we even glued Soviet standard wallpaper with four hands, so we have worked out this point.

How to glue meter-long non-woven wallpaper - step-by-step instructions

If the choice of material for gluing the walls has already been made, then let's get to work. Let's repeat it again: Before gluing meter-wide non-woven wallpaper, you must carefully level the surface, because the flaws in the walls will not allow the canvases to be joined together properly.

How to glue meter-long non-woven wallpaper - step-by-step diagram

Step 1: Surface Preparation

However, we note that non-woven fabric, thanks to its characteristics (thickness and softness), can still hide the smallest irregularities. Old wallpaper, even from perfect walls, needs to be removed; if it doesn’t give in, then wet it and the paper will give in. If after treatment the wall is rough, this is even good - the connection between the wall, glue and canvas will be better.

Step 2: Eliminate drafts

Remember that when covering walls with any wallpaper, the temperature regime is important, and the absence of drafts before complete drying is a guarantee that the joints will not separate, the canvases will not “bubble” and will not “sag”. This may take a day, or it may take three.

Step 3: Turn off the lights, remove everything unnecessary

Before starting work, do not forget to turn off the electricity in the room being repaired and remove the top covers of sockets and switches. When the wallpaper is dry, you will cut the canvas in the right places crosswise and return the covers to their original places. You should also temporarily remove all fasteners, screws, nails, and dowels from the walls.

Step 4: Prepare the glue

Let's start preparing the glue, which, as you remember, must correspond to the type of wallpaper you have chosen. Pour water into the vessel in which you are going to dilute it and, shaking in a circle, pour out the glue in a thin stream. After thoroughly mixing the mixture, let it brew - the required time and other features will be indicated on the packaging. Usually it's 15 minutes.

Step 5: Marking the Wall

As with any wallpaper, experts recommend starting to cover the walls from the window. Although in the case of meter rolls and non-woven ones, in particular, due to the fact that they are glued end-to-end, you can start from where it will be more convenient and economical for you in terms of material consumption. To glue the first fragment evenly, using a plumb line, a ruler and a pencil, draw a perfectly vertical line, from which you will begin gluing.

Step 6: Cutting the canvas

Are you ready to cut the required length of web from the roll? Leave a reserve on the ceiling and floor sides - 10 cm is enough. When the wallpaper is dry, you can cut off any excess with a sharp utility knife. And when pasting, if it suddenly turns out that you need to move the canvas up or down, you will have this opportunity, since non-woven wallpaper allows you to do this within 10 minutes.

Step 7: Let's start gluing

If all the preparatory stages have been completed, let’s get started! Mix the glue thoroughly again and apply it with a wide brush to the part of the wall where, according to the markings, the first tape will go. As you know, non-woven fabrics are not smeared with glue, so together with your partner, carefully apply the dry wallpaper to the right place and begin smoothing the fabric. This work is traditionally done from top to bottom and from the center to the edges. It is convenient to use a special roller for this, and pick up excess glue around the edges with a damp cloth. We glue the second canvas as close as possible and attach it with an edge. If necessary, we connect the drawing. Repeat this operation the required number of times, and the job will be done.

Step 8: Taping off awkward areas

Particular attention should be paid to pasting the so-called inconvenient places. We're talking about corners, openings and behind radiators. There is nothing complicated, it just takes a little more time. The canvas is glued so that it rests slightly on the corner wall. On the other wall, do the same with the second tape. Then, using a ruler and a sharp knife, a vertical cut is made through these sheets. Having raised the edges, remove the excess parts of the wallpaper, and, having coated the joint with additional glue, put the sheets back. To paste the areas behind the battery, you will have to cut convenient small pieces.

By the way, don’t forget that when covering the walls of a room with new wallpaper, you can show your imagination. Moreover, we can talk about experiments with both color and shapes. It will definitely make your home completely unique.