Gas boiler with boiler. Gas boiler with boiler Floor-standing gas boilers protherm double-circuit with boiler

Protherm is a leading manufacturer of heating and water heating equipment. It is this company that produces some of the most reliable floor-standing boilers. They are used to heat buildings and rooms for various purposes- from private homes to commercial and industrial buildings. Protherm floor standing boilers are characterized by:

It is impossible not to note the high-quality service available throughout Russia.

Protherm floor-standing boilers are available in two varieties - with steel and cast iron heat exchangers. The first ones are different affordable price and ease of installation. Boilers with cast iron heat exchangers are more resistant to corrosion and thermal loads and have an extended service life. Certain models of cast iron boilers are distinguished by increased power, heating buildings and large areas.

Boilers are also divided into single-circuit and double-circuit. Single-circuit models are simple and serve to supply heat to heated rooms. For production hot water answers optional equipment- boilers indirect heating and water heaters of all systems. Dual-circuit models include a circuit for preparing hot water with a capacity sufficient for one or two water points. Some models provide storage tanks for storing hot water - they are characterized by increased productivity, working with many consumers.

Protherm floor-standing boilers are equipped with numerous safety systems that monitor the presence of draft and flame. They also prevent equipment from overheating and freezing. For more convenient temperature control, room thermostats are offered for them - they independently maintain the set temperature regime. Most boilers need to be connected to the electrical network, but some models are non-volatile - they can operate in buildings located away from gas mains. Separately, we offer models designed for heating large buildings - up to 1500 square meters. m. Also in the range of Protherm products there are boilers that operate on several types of fuel - they are equipped with replaceable burners for working on gas, fuel oil or diesel fuel.

Buy floor standing boilers from the Protherm company you can in the Teplodvor online store. Pick up suitable model, focusing on thermal power, type of heat exchanger and number of circuits - we will provide prompt delivery throughout the Russian Federation, offer pickup, and provide the equipment with a factory warranty.

Protherm BearKLZ is a floor-standing gas boiler that is designed to heat water located in a storage tank. A 26 kW gas boiler includes not only the function of heating water, but also other qualities. For example, there is a room heating function, automatic diagnostics, automatic control of the removal of combustion products, and many other positive functions.
Gas boiler company ProthermKLZ has many advantages over other boilers. Since in the company's boiler Proterm KLZ a special outlet for hot water circulation is built in, there is an expansion tank that holds a sufficient amount of water, and there are also 2 circulation pumps. Boilers Protherm Bear KLZ made of material that protects the boiler from freezing. When making a boiler ProthermKLZ All safety measures were observed, so it was made according to all international standards. This equipment is easy to operate using push-button controls. A couple of presses of special buttons and your gas boiler is from the company Proterm KLZ will be able to work in the mode you need.
Another positive plus is that you can purchase this boiler in the color you need. After all, equipment is often selected to match the interior of the room, and in this case, the boiler can be purchased in almost any color scheme. Basically, of course, this White color, a standard shade suitable for any interior.
Gas boiler being installed ProthermKLZ on the floor in any free corner. The width of the cauldron is 50.5 cm, depth 89.2 cm, height 138.5 cm. In general, the cauldron is not bulky and will not take up much space.
Consumes electrical energy gas boiler approximately 0.13 kW. The standard voltage is 220 V.

An increasing number of consumers are striving to organize an autonomous heating system. Funds spent on purchase and installation heating equipment, will soon pay off thanks to savings on energy resources and the ability to independently regulate the power of the system.

The optimal way to heat private houses and apartments at the same time as the ability to obtain hot water at any time and in the required quantity is to use gas boiler, equipped with a built-in boiler.

Design and principle of operation of a boiler with a built-in boiler

An integral part of such a heating unit is a container designed to accumulate hot water. Its volume can vary from 10 to 100 liters. A secondary heat exchanger is built inside the tank. The method of installing such a boiler largely depends on the volume of the boiler. Boilers with a capacity of up to 60 liters are usually wall-mounted, and those with a capacity of more than 60 liters are floor-mounted.

These units may have open or closed chamber combustion. In the first case, heating equipment operates using traditional chimneys, in the second, combustion products are removed through coaxial chimneys.

Attention! The power range of boilers with a built-in boiler usually starts from 28 kW.

To get hot water, simply open the tap. While hot water is being consumed, the boiler heats up its new supply.

Advantages of heating units with built-in water storage

A gas boiler with a boiler is ideal solution when using several water points (2-4) and provides the following advantages:

• A significant positive point is the ability to heat water even during peak hours, when the pressure in the pipeline is very weak.

Attention! In this case, double-circuit conventional boilers may simply not switch on to the water heating mode in the DHW circuit.

• To put into operation a unit with a built-in hot water storage tank, a separate installation of water supply and heating systems is not required. It is enough to connect energy carriers to the boiler - gas and electricity (for automatic operation), as well as water.
• The units are compact, so they do not require much space for their placement. All components of the equipment are assembled in a single housing.

Among the boiler equipment equipped storage tanks, units of the Beretta and Protherm brands can be distinguished.

Beretta boiler with built-in boiler

The Italian company Beretta produces all types of heating equipment. The products of this company belong to the economy class, but only high-quality materials are used for their production.

Beretta Boiler 28 BAI is a wall-mounted turbocharged boiler with a 60-liter boiler made of stainless steel. The power of the unit is 28 kW.

Features of the model that ensure its comfortable and safe operation:

• Automatic electric ignition, ionization control function of the burner flame.
• The modulating burner provides the ability to smoothly change power.
• The atmospheric burner, made of stainless steel, provides an easy transition from operating on main gas to liquefied gas.
• The boiler is equipped with a three-speed circulation pump with deaerator.
• The heating equipment is equipped with two expansion tanks. One, with a volume of 8 liters, is installed in the heating circuit, the second has a volume of two liters and is installed in the DHW circuit.
• The boiler has two modes “Winter-Summer”. In the “Winter” mode, the S.A.R.A. function is activated, which provides automatic adjustment of the coolant temperature; it is recommended to use a room temperature regulator.
• The Safety Baby function (protection against burns) provides for a water temperature in the storage tank of approximately 43 0 C without the ability to regulate it.

Advice! The Safety Baby function can only be activated by contacting the service department.

• The system protects the boiler from freezing and the pump from blocking.
• External control devices can be connected to the equipment, which include room thermostat, programmer, sensor outside temperature.

Attention! Connecting a programmer and an outside temperature sensor provides the function of weather-dependent control of the coolant temperature.

The control panel contains: a thermomanometer, an operating mode switch, a coolant temperature regulator in the heating circuit, a water temperature regulator in the supply circuit hot water, an indicator indicating the state of the boiler.

The cost of this unit is approximately $1,500.

Design features of the Protherm Bear 30 KLZ boiler

The boiler model Protherm 30 KLZ is an excellent solution for those who, along with efficient heating system, wants to have an uninterrupted supply of hot water in the required quantity. The unit is equipped with a horizontal boiler with a capacity of 90 liters.

Design features of the gas boiler Protherm 30 KLZ:

• The storage tank contains a magnesium electrode that protects the container from corrosion, and a built-in circulation pump.
• The power of the unit can be varied from 70 to 100% using a modulating burner.
• Combustion products can be removed naturally or forcibly using a turbo attachment.
• The boiler has a floor-standing design and can be adjusted in height to provide stability to the unit.
• This equipment can be controlled by a thermostat and an outside temperature sensor.
• The boiler is equipped with two expansion tanks - 4 liters for the boiler and 10 liters for the heating circuit.

Attention! The Protherm 30 KLZ unit is used for heating and supplying hot water to private buildings, apartments, office premises, small industrial enterprises, which have running water.

The approximate cost of the unit is $2,500.