Temperature control
High-power modern gas boiler BaxiLUNADUO-TEC+ 40GA- this is an ideal heating unit for placement in any area household premises most different shapes. The device is presented in a special case, small sizes which allows you to conveniently install the boiler in the desired location, without taking up a significant amount of usable space.
Features and advantages of Baxi series wall-mounted gas boilers LUNA Duo-tec+
- Gas system
- Adaptive combustion control system;
- Power modulation ratio - 1:7;
- Maintain rated power when inlet gas pressure drops to 5 mbar;
- Continuous electronic flame modulation in heating and domestic hot water modes;
- Reduced CO and NOx content;
- AISI 316L stainless steel burner with pre-mixing of gas and air;
- Can be reconfigured to run on liquefied gas.
- Hydraulic system
- Energy saving two speed circulation pump With electronically controlled and a built-in automatic air vent;
- Primary heat exchanger made of AISI 316L stainless steel;
- Secondary plate heat exchanger made of stainless steel ( dual-circuit models);
- Automatic bypass;
- Pump post-circulation;
- Cold water inlet filter;
- Built-in electric three-way valve (including single-circuit models).
- Temperature control
- New control panel with wide display;
- Two heating temperature sensors on the supply and return;
- Self-adaptation of weather-dependent automation;
- The temperature control range in the heating system is 25–80°C;
- Built-in weather-compensating automation;
- Regulation and automatic maintenance of the set temperature in heating and hot water circuits;
- Digital indication of temperature and pressure;
- Ability to control multi-temperature zone systems.
- Control and safety devices
- Electronic pressure gauge - triggered when water pressure drops in 2 stages: warning and blocking (0.5 bar);
- Electronic self-diagnosis system and storage of the latest operating errors;
- Ionization flame control;
- Pump and three-way valve blockage protection systems;
- Protective thermostat against overheating of the coolant in the primary heat exchanger;
- Control safe removal combustion products using an NTC sensor;
- Safety valve in the heating circuit (3 atm.);
- Frost protection system in heating and hot water circuits.
Modern gas heating equipment Baxi LUNA Duo-tec+ series easily adapts to various types gas and its quality, as well as other parameters. This makes them incredibly convenient. Along with this, the boilers have a simple electronic system control, which will ensure the most comfortable heating of the premises, as well as the required DHW performance (double-circuit models). All models are equipped with a modulating burner that provides complete pre-mixing.
The wall-mounted gas double-circuit boiler Baxi LUNA Duo-tec+ 40 GA with a power of 32 kW, heating area of 320 m2 is intended for heating and hot water supply in administrative and residential premises.
Luna Duo-tec series boilers are equipped with a two-speed pump, which is controlled by the boiler electronics and a burner with a wide modulation range.
A distinctive feature is the completely soundproofed combustion chamber, thanks to which the boiler operates silently, which significantly expands the possibilities of installing equipment in a house or apartment.
Advantages:
Gas system:
Adaptive Combustion Control System
Power modulation ratio - 1:7
Retains rated power when inlet gas pressure drops to 5 mbar
Continuous electronic flame modulation in heating and domestic hot water modes
Reduced CO and NOx content
Burner made of stainless steel AISI 316L with pre-mixing of gas and air
Can be reconfigured to run on liquefied gas
Hydraulic system:
Energy-saving two-speed circulation pump with electronic control and built-in automatic air vent
Primary heat exchanger made of AISI 316L stainless steel
Secondary stainless steel plate heat exchanger (dual circuit models)
Automatic bypass
Pump post-circulation
Cold water inlet filter
Built-in electric three-way valve (including single-circuit models)
Temperature control:
New control panel with wide display
Two heating temperature sensors on supply and return
Self-adaptation of weather-dependent automation
Temperature control range in the heating system 25-80°C
Built-in weather-compensating automation
Regulation and automatic maintenance of the set temperature in heating and hot water circuits
Digital temperature and pressure display
Ability to control multi-temperature zone systems
Control and safety devices:
Electronic pressure gauge - triggered when water pressure drops in 2 stages: warning and blocking (0.5 bar)
Electronic self-diagnosis system and storage of the latest operating errors
Ionization flame control
Pump and 3-way valve blockage protection systems
Protective thermostat against overheating of the coolant in the primary heat exchanger
Monitoring the safe removal of combustion products using an NTC sensor
Safety valve in the heating circuit (3 atm.)
Frost protection system for heating and hot water circuits
Key Features:
Power: 32 kW
Heating area: 320 m2
Number of circuits: dual circuit
Installation type: vertical
Combustion chamber: closed
Heat exchanger material: stainless steel
Voltage: 230 V
Capacity: 22.9 l/min
Fuel consumption: 3.36 m3/h
Efficiency: 107.6
Temperature range in the heating circuit: 25-80 °C
Adjustable temperature range in the DHW circuit: 35-60 °C
Volume expansion tank: 9.1 l
Acceptable operating pressure: 19.1 bar
Chimney diameter: 60/100 mm
Dimensions (HxWxD), mm: 763x450x345
Weight: 41 kg
Contact our specialists and get advice on how to choose and buy the right Baxi gas boiler, as well as order delivery and installation by optimal cost.
Our manager will guide you through the characteristics of the boilers, clarify prices and availability.
You can get a discount on the price if you buy from us gas boilers Baxi wholesale or order boiler room installation and maintenance services.
- Delivery in Moscow 500 rub.
- Delivery within Moscow Region: 500 rubles + 50 rubles/km from the Moscow Ring Road
- Delivery across Russia - transport companies
- Pickup: free
You can always indicate a delivery date that is convenient for you (but not less than two working days) when agreeing on the order. Delivery of goods is carried out from Monday to Friday from 12:00 to 18:00
Delivery at a later or earlier time interval is agreed individually with the Buyer and is carried out for an additional fee.
Delivery on Saturday, Sunday and holidays (by agreement)
Delivery on weekends and holidays is carried out at the request of the buyer, upon confirmation of the application 2 working days in advance.
Delivery on weekends and holidays is carried out at the buyer's request for an additional fee, upon confirmation of the application 2 working days in advance.
Pickup
You can pick up your order yourself at the pick-up point at Podemnaya St., 14, building 37.
Pickup of goods is carried out daily except Saturday, Sunday and holidays after confirmation from the sales staff.
Delivery terms
Delivery of orders placed through the Ecolife online store is carried out to the entrance or to a place where a truck can freely drive up and where goods can be unhindered, as well as to cargo collection points by transport companies carrying out transportation to the regions.
The delivery driver can provide loader services only by prior arrangement for an additional fee.
Upon delivery to the Buyer, the Seller is responsible for appearance goods until the moment of acceptance and transfer to the Buyer. Claims regarding the appearance and configuration of the delivered goods, in accordance with Art. 458 and 459 of the Civil Code of the Russian Federation, can only be presented before the goods are transferred by the Seller to the Buyer. From the moment of acceptance and delivery of the goods, the seller’s obligation to transfer the goods is considered fulfilled. The fact of acceptance of the goods by the Buyer is confirmed by a signature in the “Purchase and Sale Agreement” in the column “Acceptance and Transfer Certificate”. If the appearance or configuration of the goods does not correspond to the proper quality, the buyer has the right not to accept the goods and not to sign the documents.
Payment
Currently, the Ecolife online store offers following methods payment for orders:
- Payment in cash upon receipt
When an order is delivered, as well as when you receive the goods yourself at a pickup point, you can pay for the order in cash upon receipt. - Payment by bank transfer
Payment using the details to the company’s account upon filling out a receipt in the bank or via online banking. After placing an order, you will receive an invoice for payment and a receipt with our details. The prices indicated in the invoice are final and include VAT. The invoice issued is valid for 5 calendar days. This payment method can be used through any bank operating in Russia.
Note:
Banks charge a transfer fee Money. For information about the amount of the commission fee, check with the bank where you plan to pay the receipt. If you choose this payment method, please wait until you receive your invoice.
The gas wall-mounted condensing boiler BAXI LUNA DUO-TEC HT 40 GA is produced using latest technologies, while remaining simple to install and operate. It is possible to install several boilers in one cascade (their number can reach up to 16 pieces), and the power of one device can be about 110 kW.
The device is equipped with a built-in pump with two operating speeds. Its operation is regulated by the boiler electronics, which can adapt to the mode desired by the user. If when using a heating device the main criterion is how to spend less electricity, then you should buy this gas wall-mounted condensing boiler BAXI LUNA DUO-TEC HT 40 GA. Among other things, the device is equipped with a burner, which provides for mixing a mass consisting of air and gas at the preliminary stage of operation. The modulation coefficient of the boiler power during its operation is 1 to 7.
The gas system installed on the device assumes:
Ensuring reduced content carbon dioxide and nitrogen oxides;
Power modulation with a ratio of 1 to 7;
Availability of the ability to reconfigure the boiler for operation using liquefied gas;
Support of rated power in case the gas pressure at the system inlet drops to 5 mbar;
The device contains an ultra-modern burner, which is made from a material such as AISI 316L stainless steel, and provides for mixing the mass of air into the room and gas at the preliminary stage of operation;
Continuous electronic modulation of the flame when setting certain modes of hot water supply, as well as when heating the room.
Equipment hydraulic system, intended for normal operation gas wall-mounted condensing boiler BAXI LUNA DUO-TEC HT 40 GA:
The primary heat exchanger of the model is made of AISI 316L stainless steel;
A pump with two-speed circulation and post-circulation, which is energy efficient and has a built-in air duct;
You can connect an external boiler designed for storage hot water.
Thermal control of the boiler is carried out by:
Digital indicators of internal pressure and set temperature conditions;
Possibility of setting up the device to operate within a week;
Automatic maintenance of the selected temperature and its adjustment in heating circuits and for DHW circuits;
Ability to control systems in areas with different temperature conditions;
Independent adaptation of device automation to weather conditions;
Availability of a modern control panel that has a wide display;
Possibility of adjusting the temperature set in heating system, which can range from 25 to 90 degrees Celsius;
The presence of heating temperature sensors separately at the water supply and at its return outlet.
Safe operation and control over the operation of the boiler is ensured by:
Ionization flame control;
A protective system located in heating circuits and for DHW circuits;
A protective thermostat that prevents overheating of the water in the primary heat exchanger;
An electronic pressure gauge, which has a special function to turn off the burner if the pressure drops below 0.5 bar;
A valve for preventing accidents located in the heating circuit;
A protective system that ensures unhindered operation of the three-way valve and pump;
Control over the environmentally friendly destruction of combustion products, which is achieved through the NTS sensor;
Recording of the latest malfunctions in the operation of the device and electronics, which is intended for self-diagnosis of the device.
Gas condensing boiler Baxi LUNA Duo-tec 40 - double-circuit wall-mounted heating equipment
For heating and hot water supply in a private house, the Baksi Luna Duo Tek 40 wall mounted boiler is suitable - easy to use
All models are equipped with a built-in two-speed pump, which is controlled by the boiler electronics and adapts to the heating system, ensuring optimal temperature regime and energy savings. The heating boilers are equipped with a modern burner with complete pre-mixing of the gas-air mixture and operate with a power modulation ratio of 1:7.
The models of the LUNA Duo-tec series have the ability of the boiler to adapt to the type and quality of gas, chimney and other conditions. All models are equipped with a built-in two-speed pump, which is controlled by the boiler electronics and adapts to the heating system, ensuring optimal temperature conditions and energy savings.
Specifications |
Unit Change |
Double-circuit boilers Baksi |
Baxi Luna Duo-tec 40 |
||
kW | 40 | |
kW | 32 | |
kW | 34,9 | |
kW | 5,7 | |
kW | 6,3 | |
kW | 41,2 | |
kW | 33 | |
kW | 5,9 | |
m 3 /h (kg/h) | 3,36 (3,20) | |
% | 97,6 | |
% | 105,8 | |
% | 107,6 | |
l/bar | 10/0,8 | |
°C | 35–60 | |
l/min | 22,9 | |
l/min | 16,4 | |
l/min | 2,0 | |
bar | 8/0,15 | |
mm | (60–100)/80 | |
m | 10/80 | |
mbar | 13–20 | |
W/V | 142/230 | |
dimensions |
||
- height | ||
- width | mm | 450 |
- depth | mm | 345 |
NET/GROSS weight |
kg | 41/44 |
Equipment Baxi (Baxi) LUNA Duo-tec 40
Heat exchanger made of stainless steel;Weather-compensated automation;
LCD display with indication of operating parameters;
Heating circuit frost protection;
Setting all parameters from the front panel of the boiler;
Security systems: overheating, flame, draft;
Energy-saving two-speed circulation pump with electronic control and built-in automatic air vent.
Gas system
- Adaptive combustion control system;
- Power modulation ratio - 1:7;
- Maintain rated power when inlet gas pressure drops to 5 mbar;
- Continuous electronic flame modulation in heating and domestic hot water modes;
- Reduced CO and NOx content;
- AISI 316L stainless steel burner with pre-mixing of gas and air;
- Can be reconfigured to run on liquefied gas.
Hydraulic system
- Energy-saving two-speed circulation pump with electronic control and built-in automatic air vent;
- Primary heat exchanger made of AISI 316L stainless steel;
- Secondary plate heat exchanger made of stainless steel (double-circuit models);
- Electric three-way valve (including single-circuit models);
- Automatic bypass;
- Pump post-circulation;
- Cold water inlet filter;
- Possibility of connecting external storage boiler for hot water.
Temperature control
- New control panel with wide display;
- Two heating temperature sensors on the supply and return;
- Self-adaptation of weather-dependent automation;
- Temperature control range in the heating system is 25-80°C;
- Built-in weather-compensating automation;
- Regulation and automatic maintenance of the set temperature in heating and hot water circuits;
- Digital indication of temperature and pressure;
- Ability to control multi-temperature zone systems.
Control and safety devices
- Electronic pressure gauge with burner shutdown function at pressure below 0.5 bar;
- Electronic self-diagnosis system and storage of the latest operating errors;
- Ionization flame control;
- Pump and three-way valve blockage protection systems;
- Protective thermostat against water overheating in the primary heat exchanger;
- Control of safe removal of combustion products using an NTC sensor;
- Safety valve in the heating circuit (3 atm.);
- Frost protection system in heating and hot water circuits.
Specifications |
Unit Change |
Single-circuit boilers Baksi |
Double-circuit boilers Baksi |
||||
Max. useful thermal power by DHW |
kW | - | - | - | 24 | 28 | 33 |
Max. useful warm heating power in 80/60°C mode |
kW | 12 | 24 | 28 | 20 | 24 | 28 |
Max. useful warm heating power in 50/30°C mode |
kW | 13,1 | 26,1 | 30,5 | 21,8 | 26,1 | 30,6 |
Min. useful warm heating power in 80/60°C mode |
kW | 2 | 3,4 | 4,0 | 3,4 | 3,8 | 4,7 |
Min. useful warm heating power in 50/30°C mode |
kW | 2,2 | 3,7 | 4,3 | 3,7 | 4,1 | 5,1 |
Max. consumed thermal power for DHW |
kW | - | - | - | 24,7 | 28,9 | 34 |
Max. consumed thermal power for heating |
kW | 12,4 | 24,7 | 28,9 | 20,6 | 24,7 | 28,9 |
Min. thermal power consumption |
kW | 2,1 | 4,1 | 4,8 | 4,1 | 4,8 | 5,7 |
Maximum consumption of natural (liquefied) gas | m 3 /h (kg/h) | 1,31 (0,96) | 2,61 (1,92) | 3,06 (2,25) | 2,61 (1,92) | 3,06 (2,25) | 3,60 (2,64) |
Max. productivity (efficiency) in 75/60°C mode |
% | 97,6 | 97,6 | 97,6 | 97,6 | 97,6 | 97,6 |
Max. productivity (efficiency) in 50/30°C mode |
% | 107,5 | 107,5 | 107,3 | 107,5 | 107,5 | 107,3 |
Max. performance (efficiency) at 30% load |
% | 107,8 | 107,6 | 107,6 | 107,6 | 107,6 | 107,7 |
Ext. capacity/fill pressure tank |
l/bar | 8/0,8 | 8/0,8 | 10/0,8 | 8/0,8 | 8/0,8 | 10/0,8 |
Temperature control range in the DHW circuit |
°C | - | - | - | 35–60 | 35–60 | 35–60 |
Hot water productivity at ΔТ=25°С |
l/min | - | - | - | 13,8 | 16,1 | 18,9 |
Hot water productivity at ΔТ=35°С |
l/min | - | - | - | 9,8 | 11,5 | 13,5 |
Min. water consumption in the DHW circuit |
l/min | - | - | - | 2,0 | 2,0 | 2,0 |
Max./min. pressure in the DHW circuit |
bar | - | - | - | 8/0,15 | 8/0,15 | 8/0,15 |
Diameter of the chimney. pipes (coaxial/separate) |
mm | (60–100)/80 | (60–100)/80 | (60–100)/80 | (60–100)/80 | (60–100)/80 | (60–100)/80 |
Max. chimney length. pipes (coaxial/separate) |
m | 10/80 | 10/80 | 10/80 | 10/80 | 10/80 | 10/80 |
Nominal gas inlet pressure (methane G20) |
mbar | 13–20 | 13–20 | 13–20 | 13–20 | 13–20 | 13–20 |
Electrical Power/Voltage |
W/V | 105/230 | 120/230 | 135/230 | 120/230 | 130/230 | 135/230 |
dimensions |
|||||||
- height | 763 | ||||||
- width | mm | 450 | 450 | 450 | 450 | 450 | 450 |
- depth | mm | 345 | 345 | 345 | 345 | 345 | 345 |
NET/GROSS weight |
kg | 34,5/37,5 | 34,5/37,5 | 36/39 | 38,5/41,5 | 38,5/41,5 | 39,5/42,5 |
Full information:
Specifications:
- Max. useful thermal power for DHW: 40 kW
- Max. useful warm heating power in 80/60°C mode: 32 kW
- Max. useful warm heating power in 50/30°C mode: 34.9 kW
- Max. consumed thermal power for hot water supply: 41.2 kW
- Max. consumed thermal power for heating: 33 kW
- Max. natural/liquefied gas consumption: 3.36 m3/h (3.20 kg/h)
- Max. productivity (efficiency) in 75/60°C mode: 97.6%
- Max. productivity (efficiency) in 50/30°C mode: 107.3%
- Max. performance (efficiency) at 30% load: 107.7%
- Ext. capacity/fill pressure tank: 10 l / 0.8 bar
- Temperature control range in the DHW circuit: 35-60 °C
- Hot water productivity at Δt=25°С: 22.9 l/min
- Hot water productivity at Δt=35°С: 16.4 l/min
- Min. water flow in the DHW circuit: 2 l/min
- Max./min. pressure in the DHW circuit: 8/0.15 bar
- Diameter of the chimney. pipes (coaxial/separate): (60-100)/80 mm
- Max. chimney length. pipes (coaxial/separate): 10/80 m
- Nominal inlet pressure natural gas: 13-20 mbar
- Electrical power/voltage: 142 W / 230 V
- Dimensions (HxWxD): 763 x 450 x 345 mm
- Weight: 41 kg
Gas system:
- Adaptive Combustion Control System
- Power modulation ratio - 1:7
- Retains rated power when input gas pressure drops to 5 mbar
- Continuous electronic flame modulation in heating and domestic hot water modes
- Reduced CO and NOx content
- Burner made of stainless steel AISI 316L with pre-mixing of gas and air
- Can be reconfigured to run on liquefied gas
Hydraulic system:
- Energy-saving two-speed circulation pump with electronic control and built-in automatic air vent;
- Primary heat exchanger made of AISI 316L stainless steel;
- Secondary plate heat exchanger made of stainless steel (double-circuit models);
- Electric three-way valve (including single-circuit models);
- Automatic bypass;
- Pump post-circulation;
- Cold water inlet filter;
- Possibility of connecting an external storage boiler for hot water.
Temperature control:
- New control panel with wide display
- Two heating temperature sensors on supply and return
- Self-adaptation of weather-dependent automation
- Temperature control range in the heating system 25-80°C
- Built-in weather-compensating automation
- Regulation and automatic maintenance of the set temperature in heating and hot water circuits
- Digital temperature and pressure display
- Ability to control multi-temperature zone systems
Control and safety devices:
- Electronic pressure gauge with burner shutdown function at pressure below 0.5 bar
- Electronic self-diagnosis system and storage of the latest operating errors
- Ionization flame control
- Pump and 3-way valve blockage protection systems
- Safety thermostat against water overheating in the primary heat exchanger
- Monitoring the safe removal of combustion products using an NTC sensor
- Safety valve in the heating circuit (3 atm.)
- Frost protection system for heating and hot water circuits