Tiprom U1 Organosilicon hydrophobizer of deep penetration Organic solvent composition. Deep penetration hydrophobizer tiprom y Storage and transportation

Instructions for use
»Download (441 Kb.

Apply to a clean surface, evenly using a brush, roller, or sprayer in several layers (with an interval of no more than 10 minutes), until the surface is completely saturated at a temperature from -20ºC to +30ºC. The waterproof effect occurs within 24 hours.

Attention.
Tiprom U1 is not recommended for horizontal finely porous surfaces ( clinker tiles etc.), long time in contact with water.
The nature of the porosity of a material can be indirectly determined by simply spraying the surface with water. If after 2 minutes the applied drops are completely absorbed, then the surface is not classified as finely porous.

Material consumption

150-350 ml/m² depending on surface porosity.

Storage, transportation

Should be stored in dry rooms at temperatures from -20ºC to +30ºC, away from heating devices and direct sun rays. Guarantee period storage - 12 months.
Transportation by all types of transport is allowed at temperatures from -20ºС to +30ºС.

Security measures

Note

For getting additional instructions, alternative methods application or information on the compatibility of the use of materials trademark Tiprom with other products or technologies by contacting the department Maintenance LLC "Ettrilat NT"

A ready-to-use composition, which is a mixture of silanes and siloxanes in an organic solvent.
Packages: 1 l and 5 l
Consumption: 150 - 350 ml/m2 (depending on the porosity of the surface being treated)

Weight

370 rub. per piece

TIPROM U1 - water repellent deep penetration (ready-made composition) in an organic solvent (has the characteristic odor of white spirit). Used to impart waterproof properties brickwork, plaster, ceramic tiles, concrete, wood, etc. Recommended for outdoor use.

Properties

Recommended for outdoor use;
doesn't change appearance processed material;
increases weather resistance and corrosion resistance of materials;
prevents the appearance of repeated efflorescence;
increases resistance to alkalis and weak acids;
practically does not reduce gas and air permeability;
eliminates capillary suction in structures located below ground level;
processing paving slabs sharply reduces the adhesion of ice to mineral surface, which greatly facilitates the process of clearing ice;
penetrates into the processed material to a depth of 35 mm (depending on the porosity of the material);
water resistance - 120 mm water column.

Application

The waterproof effect occurs within 24 hours.

Packaging, storage and transportation

Polyethylene canisters 1 and 5 liters.

Should be stored in dry rooms at temperatures from -20°C to +30°C, away from heating devices and direct sunlight. Guaranteed shelf life - 12 months.

Transportation by all types of transport is allowed at temperatures from -20°С to +30°С.

Security measures

Tiprom U composition is used to protect surface and building structures made of ceramic and sand-lime brick, concrete, cellular concrete, plaster, paving slabs**, slate, wood, natural stone and others building materials mineral origin to protect against water penetration, odorless organic solvent

Packaging – 5 liter canisters
Consumption - From 150 to 300 ml/m²
A ready-to-use composition, which is a mixture of silanes and siloxanes in an organic solvent.

Product Features

Product properties

Does not change the appearance of the processed material;
. increases weather resistance and corrosion resistance of materials;
. prevents the appearance of repeated efflorescence;
. increases resistance to alkalis and weak acids;
. practically does not reduce gas and air permeability;
. eliminates capillary suction in structures located below ground level;
. treating paving slabs sharply reduces the adhesion of ice to the mineral surface, which greatly facilitates the process of removing ice;
. penetrates into the processed material to a depth of 35 mm (depending on the porosity of the material);
. coating service life is at least 10 years.

Mode of application

Apply to a clean surface, evenly using a brush, roller, or sprayer in several layers (with an interval of no more than 10 minutes), until the surface is completely saturated at a temperature from -200C to +30 °C.
The waterproof effect occurs within 24 hours.

Consumption of ready-to-use solution
150-300 ml/m² - depending on the porosity of the surface being treated.
Technical quality indicators
Water resistance, mm water column, 120
Packaging - 5 liter polyethylene canisters.

Storage and transportation

Should be stored in dry rooms at temperatures from -20°C to +30°C, away from heating devices and direct sunlight. Guaranteed shelf life - 12 months. Transportation by all types of transport is allowed at temperatures from -20°С to +30°С.

Security measures

While working, use safety glasses and rubber gloves. In case of contact with eyes, rinse with water. Keep away from children and animals. Protect non-absorbent surfaces (windows, plastic, metal) and plants from contact. Tiprom U is not recommended for horizontal finely porous surfaces (clinker tiles, etc.) that are in contact with water for a long time. The nature of the porosity of a material can be indirectly determined by simply spraying the surface with water. If after 2 minutes the applied drops are completely absorbed, then the surface is not classified as finely porous.