UNIFORM STANDARDS AND PRICES FOR CONSTRUCTION,
INSTALLATION AND REPAIR AND CONSTRUCTION WORKS

Collection E40

MANUFACTURING OF BUILDING STRUCTURES AND PARTS

Release 3

WOODEN STRUCTURES AND DETAILS

INTRODUCTION

CHAPTER 1. MECHANIZED PROCESSING OF LUMBER TECHNICAL PART

§ E40-3-2. Circular saw with manual feed for longitudinal sawing

§ E40-3-3. Circular saw with mechanical feed for longitudinal sawing

§ E40-3-4. Multi saw with mechanical feed for longitudinal sawing

§ E40-3-5. Circular saw cutter

§ E40-3-6. Planer

§ E40-3-7. Planer

§ E40-3-8. Milling machine

§ E40-3-9. Tenoning machine

§ E40-3-10. Double-sided tenoning machine

§ E40-3-11. Quadruple Planer

§ E40-3-12. Drilling and grooving machine

§ E40-3-13. Chain slotting machine

§ E40-3-14. Production of parquet riveting on machines

§ E 40-3-15. Processing (grinding) joinery on a grinding machine

§ E40-3-16. pruning door panels on cutting machines

§ E40-3-17. Processing materials with power tools

§ E40-3-18. Sharpening, straightening, setting saw teeth and sharpening knives for woodworking machines and tools

§ E40-3-19. Marking and marking of parts

§ E40-3-20. Permutation cutting tools on woodworking machines

Chapter 2. MANUFACTURING AND ASSEMBLY OF BUILDING AND STRUCTURES ELEMENTS

§ E40-3-21. Fabrication of trusses and beams

§ E40-3-22. Manufacturing of roof elements

§ E40-3-23. Assembly of elements for filling window and doorways

§ E40-3-24. Manufacturing of gates and carpentry doors

§ E40-3-25. Assembly of blind gates from prefabricated parts

§ E40-3-26. Installation of window and door fixtures

§ E40-3-27. Production of profiled bars and carpentry rods

§ E40-3-28. Making and fitting mates

§ E40-3-29. Panel making

§ E40-3-30. Manufacture of scaffolding, ladders and ladders

§ E40-3-31. Production of fence elements

§ E40-3-32. Assembly of window sill boards from finished parts

§ E40-3-33. Manufacturing of carpentry boards

§ E40-3-34. Production of glued floor boards from bars and slats

§ E40-3-35. Assembly of protective radiator grilles

§ E40-3-36. Production of small molds for playground equipment

§ E40-3-37. Manufacture of inventory and small items

Chapter 3. ANTISEPTATION AND FIRE PROTECTION OF WOOD

§ E40-3-38. Preparation of antiseptic and flame retardants

§ E40-3-39. Antiseptic and fire retardant impregnation of materials

DEVELOPED by the Central Republican Regulatory Research Station (CRNIS) of Rosagropromstroy under the methodological guidance and with the participation of Central Bureau standards for labor in construction (TsBNTS) at VNIPI labor in construction Gosstroy of the USSR.

The technology for the production of works provided for in the collection is agreed with the Technical Center of Rosagropromstroy.

APPROVED by the resolution of the State Construction Committee of the USSR, the USSR State Committee for Labor and social issues and the Secretariat of the All-Union Central Council of Trade Unions dated December 5, 1986 No. 43/512/29-50 for mandatory use in construction, installation and repair construction works Oh.

INTRODUCTION

1. The norms of this issue provide for the performance of work in ancillary and auxiliary industries and other farms that are on the balance sheet of construction organizations.

When performing work directly on the construction site N.vr. and Rass. multiply by 1.2 (HF-1).

2. Manufacture of wooden structures and parts by hand, as a rule, is not allowed. The specified restriction does not apply to construction enterprises that do not have a set of necessary woodworking equipment and manufacture wooden structures and parts in small quantities, i.e. when performing non-serial work.

3. Technical requirements for the production of carpentry and joinery work include:

accuracy of observance of the sizes and a form;

conjugation density;

thoroughness of surface treatment;

selection and correct use of wood species, grade and size of materials in accordance with the type and responsibility of the structure.

4. The scope of work in the paragraphs is given with an indication of only the main operations that characterize the normalized work as a whole.

The norms take into account all auxiliary and preparatory operations that are an integral part of technological process standardized work. These include: according to chapters 2, 3 - selection of materials, checking the quality of work, touching up tools in the process of work, moving materials and products at a distance of up to 30 m; according to chapter 1 - testing the operation of machines, lubricating them during operation, rejecting parts, touching up tools, handing over products, cleaning chips and dust from machines, eliminating minor malfunctions.

Change and point of cutting tools on woodworking machines, marking and marking of parts, delivery of parts to the machine, stacking, removal of parts from the machine, removal of waste from the workshop by the standards for processing sawn timber on woodworking machines are not taken into account and are paid additionally.

5. All paragraphs of this issue provide for materials, structures and products that meet the requirements of the current regulations in terms of assortment, quality and condition. specifications and GOSTs.

If there are more than three healthy intergrown knots with a diameter of up to 50 mm or six knots with a diameter of up to 30 mm H.v. and Rass. for manual processing, multiply by 1.2 (HF-2), and for work performed with power tools, by 1.1 (HF-3).

It is forbidden to apply these coefficients to the norms and prices for work on the assembly and finishing of products.

6. The norms provide for the manufacture of structures and their parts from soft wood (pine, spruce, fir, aspen, linden, etc.). When using wood of other species N.vr. and Rass. multiply by the coefficients given in the table.

7. When working on woodworking machines, special safety instructions must be observed.

Maintenance of machines is carried out by workers with special training and permission to work on woodworking machines.

The machine must be provided with quick and reliable stopping devices and, in addition, where possible, with a braking device. The machine must be installed on a solid foundation, aligned with a plumb line.

Gears to the machine must be securely guarded. If there are several working tools (cutters, etc.) on the machine shaft, then the tools that are not currently working must be removed, turned off or tightly closed with cases. The electrical equipment of the machines must be safe and have grounding.

Blocking of approaches to machines is unacceptable. At machines, it is necessary to have free areas for laying material and finished products. Machines are equipped with pneumatic suction for sawdust and chips.

When using power tools, you must follow following rules safety precautions: light parts must be securely fastened during processing, the power tool must be grounded.

When moving from one place of work to another, regardless of distance, the motor of the power tool must be turned off, and the current-carrying cable must not be twisted or twisted; it is forbidden to lay a cable connecting the tool to the mains through access roads and warehouses of materials; It is strictly forbidden to make repairs and corrections to the tool while the motor is on.

CHAPTER 1. MECHANIZED PROCESSING OF LUMBER TECHNICAL PART

INSTALLATION AND REPAIR AND CONSTRUCTION WORKS

Collection E40

MANUFACTURING OF BUILDING STRUCTURES AND PARTS

Release 2

METAL CONSTRUCTIONS

DEVELOPED by the Central Regulatory Research Bureau (TsNIB) and Regulatory Research Station No. 1 under the trust Uralstalkonstruktsiya Minmotazhspetsstroy of the USSR using regulatory materials from other ministries and departments under the methodological guidance and with the participation of the Central Bureau of Labor Standards in Construction (TsBNTS) at the All-Union Scientific Research and the design institute of labor in the construction of the Gosstroy of the USSR.

The production technology provided in the collection is agreed with the Gorky Design and Technology Bureau (GPTB) of the All-Union Research and Design Institute Promstalkonstruktsiya.

APPROVED by the Decree of the State Construction Committee of the USSR, the State Committee of the USSR on Labor and Social Affairs and the Secretariat of the All-Union Central Council of Trade Unions of December 5, 1986 No. 43/512/29-50 for mandatory use in construction, installation and repair and construction work.

Introduction

1. The issue contains norms for work on the manufacture of building metal structures and parts in workshops that are on the balance sheet of construction organizations, equipped with appropriate equipment and lifting mechanisms.

2. The production standards provide for the manufacture of structures from rolled, stamped and cold-formed steel sections in compliance with the quality requirements of the work performed in accordance with SNiP III-18-75 “Metal structures”.

Workers are required to know and comply with all the requirements stipulated by the release, regulated by the above SNiP.

Workers are required to know and comply with safety regulations when performing work in accordance with the requirements of SNiP III-4-80 “Safety in construction”.

3. The norms are taken into account, with the exception of cases specified in technical parts and paragraphs of each chapter, the following works:

movement of materials, workpieces and parts within working area(10-15 m);

cleaning of metal, parts, semi-finished products from dirt and rust with scrapers, brushes;

familiarization with the drawing and other documentation;

assembly, marking of parts and structures;

canting and reversals of parts and assembled structures in the process of processing and assembly;

installation, rearrangement and cleaning of portable ladders, devices within the workplace.

4. The production standards provide for the performance of all work by workers of one profession - a metalworker. In this regard, in the composition of links to the paragraphs of the Collection, the profession of workers is not indicated.

Tariffication is made according to ETKS of works and professions of workers, vol. 2, approved on January 16, 1985

Chapter 1. Manufacture of parts Technical part

1. The scope of work given in the paragraphs of the chapter is given in summary indicating only the main operations that characterize the process as a whole. Auxiliary and secondary operations are not mentioned in the scope of work, but their implementation is provided for by the norms and is not paid separately.

These operations include: selection of part sizes; turning on and off the mechanism, machine; installation and change of drill, matrix and punch; slinging and slinging of materials, blanks and parts when they are moved by a crane; layout of metal, blanks on racks; supply of parts to the machine; moving and removing the part from the machine; fixing parts in the fixture and detaching; kindling and maintaining a fire in the furnace when bending metal in a hot state.

2. Change of knives on the press scissors.

3. The processing of angle steel with different flanges is normalized as the processing of equal-flange angle steel according to the average size of the flanges, and when melting and bending steel, the design size is taken according to the wide flange.

STATE CONSTRUCTION COMMITTEE OF THE USSR (Gosstroy USSR)

ENiR

unified norms and prices for construction, installation and repair and construction works

Collection E40

MANUFACTURING OF BUILDING STRUCTURES AND PARTS

Release 4

Parts and assemblies for sanitary systems

Approved by the Decree of the State Construction Committee of the USSR, the State Committee of the USSR on Labor and Social Affairs and the Secretariat of the All-Union Central Council of Trade Unions of December 5, 1986 No. 43/512/29-50 for mandatory use in construction, installation and repair and construction works.

Designed for use in construction and installation, repair and construction and equivalent organizations, as well as in subdivisions (teams, sites) of production associations, enterprises, organizations and institutions engaged in construction and overhaul in an economic way, transferred to new conditions for remuneration of workers in accordance with the resolution of the Central Committee of the CPSU, the Council of Ministers of the USSR and the All-Union Central Council of Trade Unions “On improving the organization wages and the introduction of new tariff rates and official salaries for workers in the production sectors of the national economy.”

Developed by the Central Regulatory Research Bureau (TsNIB) of the USSR Ministry of Assembly and Special Construction Works using regulatory materials from other ministries and departments under the methodological guidance and with the participation of the Central Bureau of Labor Standards in Construction (TsBNTS) at the All-Union Scientific Research and Design Institute of Labor in construction of Gosstroy of the USSR.

The technology for the production of works, provided for in the Collection, was developed by the State Design Institute “Proektpromventilyatsiya” of the USSR Minmontazhspetsstroy.

Leading performers - V.N. Zolotukhin(TsNIB), G.M. Silver(NIS-14 under the trust "Centrosantekhmontazh").

Artists - A.M. Makarov(NIS-14 under the trust "Centrosantekhmontazh"), M.E. Mikhaleva(TsNIB), A.M. Pyatikopov(GPI “Projectpromventilation”), B.M. Trubitsina, T.S. Voilochnikova(TsBNTS).

Responsible for the issue - L.N. Kharchenko (TsBNTS).

Introduction

1. The norms of time and prices of this issue provide for work on the procurement of components and parts, the preparation of fittings and devices for central heating systems, internal and external heat supply networks, water supply, gas supply and sewerage, as well as the equipment of sanitary cabins with pipelines and devices manufactured by in the shops of procurement workshops (CZM), equipped with appropriate equipment and fixtures.

2. In addition to the main work, the time norms of this issue take into account and are not paid additionally (except in special cases): transitions of workers related to the technology of work production; bringing and carrying materials, parts, products, instruments and equipment, as well as moving units, parts and other workpieces in containers or “on oneself” at a distance of up to 10 m, and tools and devices within the workshops; cleaning and lubricating machines, tools and fixtures and keeping the workplace clean and tidy; preparation and cleaning of tools and fixtures; receiving assignments and familiarization with sketches, drawings and technological maps for the procurement of pipelines; delivery of work.

3. The norms of this issue do not take into account and are paid additionally: adjustment of machines; tool sharpening; selection, acquisition, bringing materials and carrying products, parts and assemblies to a distance of more than 10 m; electric tacking, which must be performed by an electric welder or a locksmith with a second profession, an electric welder of manual welding.

4. The preparation of pipelines and the manufacture of parts and products, as well as the preparation of fittings, pumps and instruments are provided for in the shops of procurement workshops equipped with appropriate equipment and fixtures. When performing these works directly at the construction site, multiply the time standards and prices by 1.25 (VCh-1).

5. Pipe diameters are indicated according to the nominal diameter of pipes with the following wall thickness:

When processing pipes with wall thicknesses above the specified N.v. and Rass. increase for every 1 mm increase in pipe wall thickness:

by 3% (HF-2) in § E40-4-6; E40-4-24; E40-4-37; E40-4-38;

by 6% (HF-3) in § E40-4-2; E40-4-7; E40-4-23.

The norms of this issue provide for the performance of work in accordance with the current Building Regulations and Rules (SNiP).

7. The quality of work must meet the requirements of the current technical specifications for the production and acceptance of work. Works performed in violation of technical specifications are considered defects.

8. The release time standards provide for the production of work performed in accordance with the requirements of SNiP Sh-4-80 “Safety in Construction”.

9. Tariffication of works is made in accordance with the ETCS of works and professions of workers, vol. 3, sec. “Construction, installation and repair and construction works”, approved on July 17, 1985.

The profession of workers “Locksmiths for the manufacture of units and parts of sanitary systems” provided for by this issue is called “Locksmith” for brevity.