Paul fast level. Self-leveling floor "Vetonit": technical characteristics. Positive technical characteristics of Weber-Vetonit fast level self-leveling floor

The building materials market currently offers various types of floor leveling products. One of the most popular methods is pouring a self-leveling floor.

Weber company, which is subsidiary company French Saint-Gobain, engaged in the production of various types of dry building mixtures. Among the products presented in the catalog there is a Weber self-leveling floor. Vetonit is a mixture used as the main base layer for any type of floor covering.

Composition characteristics

The mixture is made on the basis of cement with the addition of limestone or fine sand as a filler. Depending on further use, plasticizers and substances to improve fluidity and adhesion to the base are added to the mixture.

The size of the granules is from 0.3 to 3 mm, depending on the substance and type of self-leveling floor. The product is packaged in 5-25 kg bags, in two-layer bags - paper and polyethylene. The opened mixture can be stored for up to a year without losing its basic properties.

In order to dilute 1 kg of the mixture, you will need 160-300 ml of water. The prepared composition begins to harden after 15 minutes, and after 2-3 hours it completely sets.

Consumption per 1m2 varies depending on the layer and type of floor:

• A layer thickness of 1 mm will require about 1.6 kg of mixture;
• Layer thickness of 5 mm – 7.5 kg/m2;
• Layer thickness of 10 mm – 15 kg/m2.

To reduce consumption, it is enough to prime the subfloor before pouring.

Technical characteristics allow working with self-leveling floors at temperature conditions from 10 to 25 degrees Celsius, which is why the product is not suitable for external work.

You should not allow drafts in the room when pouring and for 24 hours after that. Humidity should be at least 50%.

The minimum layer thickness is 1 mm, the maximum is 25 cm. A slight shrinkage of the layer is possible from 0.5 to 0.8 mm per meter, which finally occurs after complete drying after 28 days.

Types of self-leveling floor

On this moment The manufacturer's catalog contains 8 types of Vetonit self-leveling floors. Separate products for the base layer and finishing coating, there is also one 2 in 1 option. They are compatible with warm floors, simple and automated. Any of them is applicable in rooms with high humidity.

Universal mixtures

Vetonit fast 4000

Creation of a layer from 5 to 80 mm at a time. The mixture is made using two-in-one technology - screed and finish. It is good to lay common floor coverings, such as laminate, on such a surface.

The tensile strength is 18 MPa, which allows the mixture to be used for repairing rooms with moderate traffic. Compression of the mixture after drying by 0.4 mm/m. Operating time – 30 minutes, sets after 4 hours.

Vetonit 4100

Self-leveling floor, which has high strength, does not crack under strong impact. Leveling layer – from 2 to 30 mm. Waterproof and flame retardant.

An ideal base for laminate, parquet boards or tiles. Withstands heating from heated floors. Designed for use in apartments, shopping centers, offices and high-traffic areas.

Mechanized application is possible. Use time – 30 minutes, after 40 minutes the floor can withstand walking, the second layer is applied a day later. After a week or more, the final coating can be laid.

Bending resistance – less than 6 MPa, consumption 1.5 kg per m2. Compression is less than 0.5 mm.

Options for finishing layer

Vetonit 3000

The coating layer is up to 5 mm, creating an absolutely flat surface. Distinctive feature– filler in the form of finely ground marble. Used for local repair of cracks with a depth of no more than 10 mm.

It's only possible manual application. The advantage is economical use: for a millimeter layer, 1.5 kg of powder per square meter is enough. meter.

Vetonit finish level

Alignment with mirror effect, under parquet board, natural parquet or laminate. They work with it exclusively by hand.

Suitable for indoors for various purposes. Tensile strength – 18 MPa, bending strength – 4 MPa, coating decreases by approximately 1 mm/m.

Vetonit 3100

An option for creating a smooth floor without flaws. Suitable for sealing cracks up to 20 mm deep.

Dilution and filling can be done manually and with special mechanical tools.

Withstands moderate loads and low indoor traffic. Consumption – 1.6 kg for a layer thickness of 1 mm.

Special blends

Vetonit Fast level

The main difference is the quick-hardening composition. The thickness of the poured layer is from 3 to 60 mm. The solution does not harden for about 40 minutes; after 3 hours it hardens to the point that it can be walked on.

The flooring can be laid every other day. Application is by hand only. Can be used as a base for any floor covering.

It can be poured onto a subfloor made of concrete, gypsum or cement-sand composition.

Withstands moderate load. Withstand mechanical stress – 15 MPa, bending strength – 3 MPa, floor shrinkage up to 0.4 mm per meter.

Vetonit strong

Reinforced floor, reinforced with fiber fiber, which actively protects against cracks. Convenient due to good spreadability and self-leveling formula.

Suitable for layer 10-50 mm. The product can be used to screed any foundation, including monolithic and floating.

The main purpose is to repair wooden floors and bitumen bases. Further actions to repair the premises should begin no earlier than after 1 week, work with tiles - after 3-7 days.

Not all rooms can boast of a perfectly flat floor. Many companies that manufacture Construction Materials, offer special compounds for self-leveling the surface. One of the leaders in the repair business is the Weber company, which has been famous for its products for more than 25 years. Vetonit self-leveling floor allows you to cope on your own and remove possible differences in the floor surface, moreover, use the product as a screed.

Specifications

You can prepare and pour the mixture without the use of specialized equipment. Everything is diluted in accordance with the instructions. The mixture consists mainly of cement and various additives. The solutions have excellent adhesive properties, and the maximum shrinkage is only half a millimeter. 20 kg bags have an average consumption of 12 sq.m. The composition is completely environmentally friendly. The finished floor is resistant to moisture and fire. Whether it's the floor in a room, office or bathroom - you will be satisfied. The main thing is not to neglect operational requirements. Let's look at the most popular products in the Vetonit line.

Superfinish self-leveling floor Vetonit 3000 is a dry mixture based on cement and fine marble. It is used to level the floor covering with a layer of 0-0.5 cm and local repair of cracks up to 1 cm deep. Applied to concrete or sand-cement base, which has been previously cleaned of all kinds of contaminants. It is afraid of drafts, so it can only be used indoors with normal and increased level humidity. Apply manually, using available means at air temperatures from +10 to +25 °C. The mixture has good adhesion.

Finishing Weber Vetonit 3000 for heated floors

The manufacturer recommends using Vetonit 3000 as a stable base for subsequent laying of the finished floor, but not as an independent unit. The consumption of Vetonit 3000 self-leveling floor is 1.5 kg of solution per 1 sq.m, provided that the layer does not exceed 1 mm.

Important! It dries very quickly - this is the main problem discussed on the forums. Experienced builders advise dividing the area into zones, because the solution hardens after half an hour. And if the area is large, it is better to take someone to help, since you will have to knead a new batch every 20 minutes.

Subsequent manipulations for laying the floor can be carried out after 24-72 hours - depending on the thickness of the differences that were covered by the self-leveling Vetonit 3000.

Main parameters:

The price of the bag is 570 rubles.

Pros of the composition:

• Vetonit 3000 is suitable for laying heated floors;
• for rooms with high humidity levels;
• premises for any purpose;
• quick drying.

• adding more than the required volume of water will lead to cracking of the floor;
• working with it is not easy, the alignment procedure requires special skill, you need to move extremely quickly;
• quick drying does not allow working on large areas;
• Suitable only for surfaces that do not have large differences, maximum 3 mm;
• not suitable for use over gypsum substrates.

Weber Vetonit 3100, is a modernized new product that is used as a finishing, filling, leveling agent. Excludes any coatings other than concrete. It can also be used to seal cracks. Pre-vacuum the surface from dust and remove grease. Floors should be primed in two layers. Begin installation in a hermetically sealed manner indoors- three days after the flood, this norm should be observed. If there is a need to level the floor in several stages, after each layer has dried, it will need to be primed again. And fill only after 24 hours.

Vetonit 3100 for moderate load (houses, public buildings)

Self-leveling self-leveling floor Vetonit 3100 is suitable for use in rooms with moderate load, including residential and public. Depending on what you will use as floor covering, you should wait from 3 to 7 days.

The solution is prepared in the proportion of 4.8-5.2 liters of water per 20 kg or 240-260 g per 1 kg of mixture.

Main parameters:

Price from 460 rub.

Pros of the composition:

• good spreadability;
• possibility of layering.

• you can only work in warm rooms;
• You can't walk around until it's completely dry.

Self-leveling floor Weber Vetonit 5000 - basic leveler

Self-leveling floor Vetonit 5000 is a basic leveler that is used as initial leveling. Suitable for use in premises of any purpose. Recommended application of a layer is from 0.5-5 cm. The room should be warm and dry, have a temperature from +10° to +25°C. To dilute a solution from a 25 kg bag, you will need 3-3.5 liters of water. The resulting thick mass remains plastic for half an hour. Can be applied in several stages.

Weber Vetonit 5000

Maintain an interval of 1-3 days, depending on the thickness of the layer. If you plan to use Vetonit 5000 dry mixtures for self-leveling floors as a monolithic screed, you will need to install and attach a damper side strip at the junction of the walls and the floor to reduce noise and free deformation of the screed.

Main parameters:

Cost 590 rub.

• monolithic screed;
• withstands dynamic loads;
• moisture resistance.

• price;
• fast setting;
• high consumption.

Vetonit 4000 self-leveling floor is a universal self-leveling floor with a mineral binder in its composition. Can be used as a topcoat and screed. It is laid in a layer from 3 mm to 8 cm in one pass. It is better to carry out thick screeds using beacon slats, leveling the layer with a control slat.

WEBER VETONIT 4100 for screed and finishing

The use of primers containing quartz sand is prohibited. Kneading is done manually using a drill with a mixing attachment, or using an m-tec machine. The manufacturer recommends conducting a spreadability test. It is advisable to fill the floor within +15/+25°C. The surface is ready for subsequent laying of floor coverings through:

Main parameters:

Price from 400 rub.

• tiles can be laid the next day;
• drying speed.

• cannot be primed with concrete contact.

High-strength self-leveling floor Weber Vetonit 4100 is a high-strength self-leveling floor that is highly resistant to cracking. He shows good adhesion on concrete and cement-sand bases.

Weber Vetonit 4310

The Vetonit 4310 self-leveling floor loses its plasticity a little earlier than the others - 20 minutes, and the consumption when applying 1 mm of thickness is 1.6 kg/sq.m. To mix the solution with one bag, you will need 4.8 liters of water. Layering is allowed after 24 hours. Good base for floors with electric heating.

Main parameters:

Price 520 rub.

• easy mixing of layers;
• fast hardening.

• The consumption indicated on the packaging does not always correspond to reality;
• price.

Vetonit Fast Level is a quick-hardening self-leveling floor for houses, apartments and public premises. Withstands moderate loads. Unlike previous configurations, the viability and fluidity of the Vetonit Fast solution is as much as 40 minutes. Besides concrete foundations, also used on gypsum coatings. Primers with quartz sand are not allowed for use.

Weber Vetonit Fast Level

Specifications:

Flooring can be laid after just 1 day if minimum thickness layer and after 21 - at maximum. Price 325 rub.

• ceramic tiles can be laid directly on the floor;
• Suitable as a screed for heated floors.

• turns black after drying;
• dries very quickly, only for small spaces.

Vetonit Strong has this name for a reason. This is due to the fact that it is used with reinforced mesh. It is applied for various types screeds: monolithic, on a separating layer, floating with sound/thermal insulation. Can be poured over unstable or dilapidated surfaces and even wooden floors.

The layer filling ranges from 1 to 5 cm and depends on the differences. Foot traffic when screeding can occur within 6-8 hours. The manufacturer advises not to carry out the installation yourself, but to invite a work team consisting of at least 3 people.

Specifications:

Floor coverings can be laid after at least 1 week. It is better if this period is 3 weeks. Price 398 rub.

• possibility of use as a reinforced screed;
• small shrinkage.

• the complexity of creating a screed.

Which Weber self-leveling floor to choose and how to install it correctly

The choice is made depending on your needs and subsequent goals. If you just want to level the floors, Vetonit 3000 self-leveling floor or Fast Level, a quick-hardening mixture, is quite suitable. A universal soldier, also suitable for screeding, is Vetonit 4000 and Vetonit Strong.

The required number of bags for a specific area can be easily calculated using the calculator installed on the official Weber website. The company is active in information activities on the Internet, and always puts emphasis on the technology of mixing the dry mixture with water:

• Pour only the amount of water indicated in the proportions on the package. Do not increase the fluidity of the mixture by adding liquid in excess;
• check the container for the accuracy of the indicated volume, a fluctuation of even 200 g can lead to delamination, prolonged drying and the appearance of cracks;
• It is not recommended to dilute by hand; it is better to use a drill with a mixing attachment, or a special machine.

Installation should be carried out in accordance with the manufacturer's requirements:

• this is always a room with a roof;
• any draft is excluded;
• even after pouring, over the next 3-7 days the room is deprived of ventilation;
• base and air temperature from +15°C to +25°C;
• the water is clean;
• all instruments are dry and clean;
• the prepared surface is completely cleaned of dust, moisture and oil stains;
• all flaws and cracks are covered or filled with Vetonit.

VIDEO: How to work with self-leveling floors - technology from A to Z

An ideal interior is impossible without quality repairs, and the first quality indicator is smooth surfaces walls, ceilings and, of course, floors. Any person who decides to make repairs or decorate a new apartment on their own faces the problem of leveling floors.

Tip 1. Choose quality materials and strictly follow the instructions on the package!

No matter how banal this advice may sound, it is always relevant. The choice of materials for pouring your future floor is perhaps the most important thing. initial stage. Particularly good are modern dry mixtures produced using modifying agents. polymer additives European quality. For example, weber.vetonit fast level is a quick-hardening self-leveling floor that can be used both for leveling during repairs and for filling the floor when finishing a new room. Such mixtures have many advantages over Russian analogues of a lower price segment.

In order to make the perfect floor for your apartment or office yourself, you don’t have to be a qualified repair worker with extensive experience - just read enough simple instructions on the packaging, carry out the necessary preparatory work and start pouring the floor. It is important to follow all stages of work exactly!

Stage 1: preparatory work

Preparatory work begins with cleaning the floor surface from dust and dirt, remnants of old glue or coating, loose particles old screed. It is best to start with dry cleaning with a vacuum cleaner, then you can go over the floor with a slightly damp cloth to finally remove any remaining dirt.

After this it is necessary check the floor for any holes. They must be repaired using a suitable repair compound, e.g. weber.vetonit S06, otherwise, when leveling the floor, the solution will flow out, and, therefore, when the solution hardens, you will not get the expected result.

Next the most important stage preparing the base is priming the surface. At the same time, the absorbency of the surface is leveled, the spreadability of the poured floor and its adhesion to the base increase. In 80% of 100% cases, this is the key to obtaining a strong screed without peeling or cracking!

To solve this issue, it is best to use a special ultra-economical primer-concentrate weber.vetonit MD 16. So to treat 10 m² you will need only 1 liter of concentrate (priming in 2 layers, dilution proportions soil: water: 1st layer - 1:5, 2nd layer - 1:3).

Next we act according to the instructions! To prepare the solution, you will need a large container and a drill mixer with a special mixing attachment. According to the instructions on the package, pour a precisely measured amount of water into the container, add the dry mixture and mix with a drill mixer for 1-2 minutes until a homogeneous consistency without lumps is obtained.

Important: weber.vetonit fast level l mixture is suitable for leveling concrete, cement-sand, gypsum surfaces, as well as for weak foundations with a compressive strength of at least 10 MPa. This mixture is also suitable for creating “warm floors” in the bathroom and kitchen.

Stage 2: pouring the floor

Before you start pouring the floor, make sure once again that you have prepared the solution correctly according to the instructions.

The working time with the ready-made self-leveling floor solution is quite limited - literally 20-30 minutes after pouring, so you need to act quickly and carefully: pour it onto the base, level it to the required thickness, and, if necessary, level it with a needle roller.
The material must be applied in small portions, each of which must be in contact with the previous one.

Next, the material will “act” for you: it will “take on the horizon” itself, creating a perfectly flat floor, and all you have to do is wait. In the case of the weber.vetonit fast level mixture, you will only have to wait a day before laying the floor covering (of course, depending on the fill layer), while domestic analogues can take up to two weeks to dry! The solution spreads well, which greatly facilitates the process of applying the material, eliminating the formation of sagging on the surface of your future floor.

If the differences in height of the treated surface before applying the solution were quite noticeable, then it is best to apply another leveling layer after the previous one has completely dried (in the case of weber.vetonit fast level - no earlier than 24 hours after applying the first layer).