home · Installation · High pressure hoses for mini washes and car washes. High pressure hoses for mini washes and car washes I want to extend the greenworks high pressure hose

High pressure hoses for mini washes and car washes. High pressure hoses for mini washes and car washes I want to extend the greenworks high pressure hose

The choice of these consumables must be approached wisely and high measure responsibility, since the use of low-quality products or the slightest defect in the hose leads to a decrease in pressure. Accordingly, the reliability and performance of the complex decreases, and along with them, income. In the worst case, the hose may rupture, which will lead to car wash downtime and additional costs.

Car wash hose: what do you need to know about it?

Sleeve high pressure for washing is a flexible tube through which water and various chemical compositions. Hoses are made from soft polymer materials, reinforced from the inside with braiding (metal cord or mesh). Single-braid hoses are designed for domestic use and can withstand pressures up to 225 bar. Less flexible and more durable double-braid hoses are used in professional car washes and can handle loads of 200-400 bar (for example, the popular high-pressure hose for Karcher can withstand up to 350 bar).

The operation scheme is simple: pressure is built up using a pump, and liquids flow into a hose connected to a gun or other actuator element of the car wash. Water and detergents are under pressure; a water hammer effect may occur inside the hose. That is why the quality and reliability of the materials from which hoses for mini washers are made are of great importance.

How to choose a high pressure hose for washing?

When purchasing a high-pressure hose, you must consider the following parameters:

  • Maximum pressure which the hose can withstand (values ​​usually range from 100 to 400 bar) and power characteristics of the equipment, with which you plan to use it. This indicator must be taken into account first of all in order to prevent possible rupture of the sleeve and other damage.
  • Temperature range. High-quality hoses can handle temperatures from -40°C to +135°C.
  • Sleeve diameter and the principle of connecting the hose to the apparatus and gun(nut-nut or nut-fitting).
  • Quality of fittings. Give preference to fittings made of corrosion-resistant metals (brass, brass alloys, stainless steel).
  • Length. There is no limit for this parameter, you can choose any required length from 3 to 100 meters (household hoses are usually up to 7 meters long, professional ones - 10 or 20 meters).

Where to buy high pressure hoses?

High-quality high-pressure hoses in Nizhny Novgorod can be purchased from CleanTech. Car wash partner." Our specialists, based on their experience, have chosen for you especially durable double-braided hose hoses that can withstand operating pressure up to 400 bar. Also in our assortment you will always find professional equipment for car washes, auto chemicals, auto cosmetics and all the necessary Consumables and accessories. You can buy a high-pressure hose for a car wash by leaving a request on the website or calling our managers at 8-906-355-06-03. We are waiting for your calls!

Greenworks G50 High Pressure Washer - Powerful and compact model, does not take up much space when stored. Does a great job of cleaning adjacent areas(with a hard (not earthen/sand) covering) and walls, gardening tools, decorative coatings and, of course, auto/motor equipment.

She has a powerful modern engine with a consumption of 2200 W. The pump has a high productivity of 440 l/hour, as well as a high maximum pressure of 140 bar. For long-lasting cleaning service, the 3-axis piston is made of stainless steel and the pump head is made of aluminum. The washing pump can operate both horizontally and vertically. Moreover, the pump is equipped with an automatic bypass valve to relieve excess pressure to protect against destruction. The miniwash has a “FullStop” function - a system for completely stopping the pump when the trigger is released. This is necessary to save water consumption, as well as to prevent the build-up of excess pressure.

The spray gun is equipped with an anti-vibration system. Connectors for fastening attachments with a quick fixation system will help you install cutters or extensions in one movement.

For convenient and compact storage, the body has fastenings for an electric cord and a special reel-reel for a high-pressure hose, and for storing nozzles and accessories there is a special pocket on the back, plus a convenient side lock for the gun, a folding/retractable handle for moving.

The sink is protected from water, dirt, dust according to the high IPX5-S1 standard, and can also operate at maximum temperature water at 50°C.

To protect the pump from dirt from the water, a coarse filter is provided.

The presence of a water suction function is one of the main advantages of the model. It can “take” water from a container on its own, for example from a rainwater barrel.

An important advantage is the delivery set, which includes: a spray gun with an extension, a universal nozzle with a nozzle, a turbo nozzle, a foam kit and a PVC hose 8 meters long.

Please note the extended warranty - 2 years.

Features of Greenworks G40 High Pressure Washer:
Power 2200W;
High pump performance - 440 l/hour, maximum pressure 140 bar;
Pump material: stainless steel and aluminum;
Bypass valve;
Automatic shutdown when the trigger is released;
Coarse filter;
Suction function;
Quick attachment of attachments;
Hose reel;
Protection class IPX5-S1;
Maximum water temperature 50°C;
Durable PVC hose;
Set of accessories included;
2 year warranty.

Included:

High pressure washer GreenWorks G50 140 bar, item 5104207, model GPWG50;

PVC hose 8.0 m;

Nozzles: spray gun with extension, universal nozzle with nozzle, turbo nozzle, foam kit / reservoir for detergent 450ml, which attaches directly to the gun.

Coarse filter.

Manual.

Warranty card.

You can pick up the goods yourself, having previously agreed on the date and time with the manager, every day from 10.00 to 20.00 in our store at Moscow, ATC MOSCOW, Kashirskoe highway, building 61 building 3A, pavilion ST-4-11

Mikhail Shindryaev 04/07/2019 00:18:17 I picked up the car wash today.
Let me start with the fact that the washer is heavy, it inspires confidence, I have already tried good pressure, it removes dirt perfectly, a long hose is what I lacked in the last wash (I won’t name the company), another advantage is the light pressure on the gun, my hand didn’t get tired while I was knocking it down dirt from the car, and of course delivery to the city was free, which is good news. I hope it will serve faithfully for quite some time. Now a little negative: when I picked up the sink from... the box was worn out, as if it had not been transported carefully, but this is most likely a question for PEC. When I opened the box, it was packed haphazardly inside, the power cord was somehow twisted, there was no protection, no foam, or even bubble film. I unscrewed the quick release, and there were traces of some kind of scale on the coarse filter, I guess that these are traces of testing this device, and not repeated use. Both the joy of the purchase and the disappointment of the careless attitude towards sending the goods.

Hello Mikhail.
Unfortunately, transport companies do not pay due attention to the quality of transportation. Before shipping, we, in turn, open each box and check its functionality and completeness, fill out warranty cards and seal them with our own tape. In any case, thanks for the feedback. We will monitor the shipment more closely.
According to the inner packaging of the sink itself - this is how the factory ships it to us. We will write a letter to the factory, but we think it is unlikely that the factory will repackage these sinks. Traces of "scale" - each washing unit is checked at stands before packaging. Therefore, residual water or any other signs only indicate that the equipment has been tested and is working properly.
Thank you for your feedback.

04.02.2019 16:47:44 "Killed" 2 high pressure washers. I was looking for a more reliable option. I stopped at Greenworks because of the metal pump.. I’ve been working for the first year and I’m still alive) I hope it will continue like this.
The downside is that there are no additional accessories.

Alexey 05/17/2018 08:51:05 So what is the water consumption? The description says 500 liters per hour, but in the photo on the sink it says 450 L/H (liters per hour). Where is the truth?
And this can be seen on almost all sites. I assume this is a photo editing error. Someone was too lazy to take a photo of the G8 washer and stupidly corrected the pressure on the G7 washer, but forgot to change the flow rate.
I'm waiting for a response from the official representative. What is the water consumption?

Hello.
Water consumption 500 l/h.
Yes, you are right, this is an editor's mistake. Let's fix it.
Thank you for your comment.

Denis 04/17/2018 01:02:13 It looks very decent.
We bought it in the new Extreme store on Smolnaya. They gave me a 10% promo for the second purchase, thank you.
The sink is heavy, almost 30 kg. Apparently, as stated, it is a good pump. In my experience, do not take less than 150 bar; anything less is for watering flowers. A separate reservoir for liquid is very convenient. I filled it in and that's it. There is a trick to switching: in order for the foam to start flowing, you need to switch to low pressure, then the foam tank is connected.
So far I am satisfied with both functionality and quality. Should I look for another saw or something?

Anatoly S. 02/25/2018 22:53:21 I have about 5 GreenWorks devices in my fleet. Everything works properly, including this sink.
Convenient handle for moving, because... The device is quite heavy. The spray is powerful, the nozzle is met. In the summer I wash everything: from the car to garden furniture and grill.
In half a day you can put everything in order.

Mega service station 01/22/2018 17:10:12 Who said that KARCHER is a normal technique?
Personally, I bought 3 pieces from entry level. When the first one broke, I thought that the stingy one pays twice. Then the more advanced K series broke down, I thought it was an accident, when the 3rd sink had already failed - I realized who the fool was. The accessories all start with the letter G. And no one can convince me otherwise, the bomb does not hit the same crater 3 times.
I bought greenworks G8 on January 20th. Claimed to be professional. But if this one breaks, I'll be very angry.

Anton_82 10.25.2017 13:04:10 When choosing between Karcher and Greenworks, of course, I doubted it for a long time. The first ones seem to have a good reputation, but I already wanted something more modern. This model attracted by solid appearance and a reliable steel piston, since plastic is usually used everywhere, but I would like the equipment to last for years. I’m not sure that the function of self-supplying water will be useful - I always wash it at home and have a hose, but still it’s not superfluous. But what’s really missing is an extra set of brushes and attachments! I had to buy additional kits, since the inputs/adapters are universal. I didn’t expect that with a pressure of 160 bar it would even beat off clay on a quad. Overall, I don’t regret the purchase and special thanks for the prompt delivery.

At car wash complexes and household mini-washes, special equipment is used. A high-quality high-pressure hose is one of the main components of the smooth operation of a car wash complex. Each sink requires high-pressure hoses of certain sizes.

Selection is carried out according to quality criteria, safety factor, service life, elasticity. Many owners of car wash complexes, when purchasing a high-pressure hose in Moscow, also pay attention to their aesthetic appearance.

For normal use HP hoses will require the use of accessories High Quality. Necessary components are press nipples, fittings and couplings. They have great strength and are made of anti-corrosion steel.

High pressure hoses are able to withstand significant temperatures and pressure, and pulsation during operation. Before sale, they are tested, which ensures reliability in operation. A high-quality high-pressure hose is made from materials that have excellent resistance to oil and acidic substances. Typically, synthetic rubber and several braids, at least two, of wire steel material are used. The most in demand are high pressure hoses from German and Italian manufacturers.

Price for high pressure hoses:

The hose for car washes can withstand low and high temperatures, up to the range - 40.. + 150 C. During operation, it is resistant to chafing and bending, for additional protection from mechanical damage It is worth using a special spiral.

The price for high-pressure hoses at Po-Moika varies from 2 thousand rubles. up to 8 tr - choose what you need. If any difficulties arise, our managers will be happy to provide you with a consultation on the product!

In Moscow, a high-pressure hose for a car wash can be purchased at quite affordable prices in our online store. An acceptable price for hoses for household mini-washers allows consumers to use washing equipment economically, replace and repair without large investments.