How to glue ceramics at home. Gluing broken dishes How porcelain is glued

Every home has ceramic or porcelain items. But it often happens that dishes break. It can be a crystal glass, a porcelain cup, a ceramic plate, or an ordinary ceramic figurine. And, despite the fact that ceramic dishes are durable, they still break. If expensive dishes were broken, then after repair you should treat the bonding areas with special dyes, or some experts advise using liquid glass. After drying, carefully cut off the remains so as not to touch the part where the repair was made.

The best way to glue ceramics and porcelain

I would like to extend the life of ceramics. It is not only used for its intended purpose, but also decorates the interior with its originality and uniqueness. What better ceramics or porcelain in terms of quality and durability - it’s hard to say, it all depends on various factors.

How to glue porcelain and ceramics? Which glue for porcelain and ceramics should I choose? Or maybe throw away the broken product? Should I throw away the broken vase or not? If not, how to glue a ceramic vase? Don't rush to throw it away. You can always throw it away. First you need to try to glue the product, and if nothing works, then you can throw it away. Throwing it away is the last thing left to do.

How to glue ceramics

Various adhesives are used to repair ceramics. There are many products available on the market for repairing ceramic cookware. Universal super glue based on cyanocrylate is the optimal glue for ceramics, which can be easily found in any specialized store. The following adhesives are available for sale: Russian production for repairing ceramic dishes - “Second”, “Super-moment”, “Cyanopan”, “Glue”, “Strength”, “Monolith”, “Elephant”. There are also imported adhesives for gluing. The best waterproof glue for ceramics is MARS.

For ceramics that are used to store food, you can use PVA glue for gluing. But, it is recommended that after gluing the ceramic cup is covered with a layer of varnish. For gluing ceramic products You can use epoxy glue, F-2 and BF-4 adhesives.

How to glue porcelain

The following range of adhesives for porcelain is offered for sale - STANGE, "cosmofen ca-12", you can also use "RAPID". Among Russian-made adhesives, carbinol glue should be noted. Also, instead of glue to repair porcelain, you can use epoxy resin EPOXY GLUE manufactured by BONDO, BIZON or similar adhesives. To glue porcelain, you can use glue made on the basis of gypsum. To do this, add the white of 1 egg to the gypsum powder and mix very well. The resulting glue can be used to glue porcelain. Moreover, the gluing procedure should be performed very quickly, since this glue hardens quickly.

For gluing, you can make other glue at home. To do this, mix 1 egg white and soda. Beat the whites until foamy, without adding soda. The whipped white should sit for one day, and only then add soda to the settled white and mix. Soda should be added so that you get a mass similar in consistency to regular dough. Very often, food glue is recommended for repairing porcelain, which is easy to make at home.

To do this you should:
1. Take 1 liter of water. Add 100 g to water. sugar, 100 gr. lime (necessarily slaked). Place the resulting mixture on the fire and cook over low heat for about 3-3.5 hours. The main thing when “cooking” is whatever boils.
2. Cool the resulting broth and let it sit for a few more hours.
3. The water that remains after settling must be drained.
4. Add 0.5 kg to the mixture. tile adhesive. Mix well and leave to settle again for 10-15 hours.
5. If there is excess water, you need to drain it. Boil the resulting mass one more time.
6. Cool. Porcelain glue is ready.

Universal adhesives for both materials

There are a huge number universal adhesives. These are adhesives that can be used to glue both porcelain and ceramics - casein glue, epoxy adhesives. The most popular is Porcelan Potch glue. Edible glue is often suitable for gluing both ceramics and porcelain. For example, the recipe described above can be used as an adhesive for ceramics and porcelain.

How to glue porcelain
Gluing porcelain at home with glue is quite simple; for this you can use food grade porcelain glue. If you use one of the following adhesives for gluing - “Rapid”, “AGO”, “Kittifix” and “Mekol”, then you should perform the following steps:
Wash and dry surfaces for gluing;
Wipe with acetone;
Apply one layer of glue to the gluing areas and immediately glue the parts together, pressing tightly.
You can fasten it with a tourniquet for strength.

Cups also break very often. And I want to give a second life to my favorite cup. The following shows how to glue a porcelain cup together. Since the gluing algorithm is similar to the previous algorithm, but there are some differences:
1. For gluing, craftsmen advise using super glue.
2. Prepare surfaces for gluing - wash, dry and wipe with acetone. If a part breaks same place remove any remaining glue.
3. Assemble the parts in advance.
4. The process of applying glue is the same. Glued in two layers.
5. Then the glued product should be placed if they are not big size Place it in a saucepan or cauldron, add warm water and put it on the fire. Boil water over low heat for 2-3 hours. The product is left to cool in water. And only then, when the water has cooled, is it removed.
6. If it is not possible to “boil” the product, then you can “warm it up” in the oven, or hold it over electric stove(but in this case, the “warming up” procedure must be performed very carefully so as not to overheat the product and not get burned).

It may happen that a crack has formed in the scale or cup, or a fragment has fallen off, creating a small hole.
Then the gluing algorithm is as follows:
1. Preparation for gluing is the same.
2. First you need to cut out the patch, the size of which should be 0.5 - 1.5 cm larger. You can use super glue for ceramics; natural glue is also suitable for gluing a patch.
3. Be sure to take a waterproof one for repairs.
4. Pour water into the product before starting to patch, but so that the water does not come into contact with the patch.
5. Then boil the water for 2-3 hours.
6. Cool everything. And pour out the water.
7. If necessary, treat the gluing area with paint.
Repair of porcelain figurines is carried out in a similar way. But after the figurine has dried, it is recommended to cover it with several layers of varnish for greater durability. Each next layer The varnish can only be applied when the previous layer of varnish has already dried well. After varnishing, the figurine will be a little heavier and will not be as fragile.

How to glue ceramics
Gluing ceramics at home is quite simple. You just need to comply following rules:
1. We start by collecting all the parts that need to be glued together. If you need to glue a previously repaired cup or vase, then remove the remaining glue with a knife. And when everything is removed from the surface, you can move on to the next step.
2. Wash all assembled parts thoroughly in warm water. For washing, you can use dishwashing detergent. Then rinse and let drain. It is not recommended to wipe, so as not to cut yourself with sharp edges or break parts at the edges.
3. All the parts required for gluing, so that you know in advance what to glue where.
4. Treat the gluing areas with acetone.
5. Apply evenly to the gluing areas. thin layer glue. To apply the glue, you can use either a thin brush or an ear cleaning stick.
6. Just leave the first layer of glue to dry.
7. Then apply a second layer of glue. And press down the parts that need to be glued. Let's keep the details for a few minutes. Then remove the residue with a rag.
8. It is advisable to glue the other part after some time, so that the previous ones stick well.
9. After the product is glued, it is advisable to fix it. And in this way everything will grasp not only correctly, but also well.
10. A part is considered repaired if it has been standing for 1-3 days (depending on the repair performed).
Since broken parts are, after all, glass, it is recommended to wear rubber gloves during repairs in order to protect your hands from minor cuts and wounds in advance.
When gluing, if necessary, you can and should use tweezers, for example, to work with small details. Repairing porcelain and ceramics is very simple according to the algorithms described above.
Do not forget that all repaired products are no longer advisable to be used for food. Because if, after placing sour or salty food in such a product, they begin to release harmful substances contained in the glue. And this is very harmful to health. As a result, you know how to glue ceramics, how to glue ceramic dishes and how to glue porcelain. Which glue to choose or make your own glue.

Even expensive, high-quality items tend to break or break, especially when it comes to porcelain and ceramics. If such a misfortune occurs and a crack appears on your vase, a figurine breaks, or damage is caused to any ceramic or porcelain product, do not immediately get upset.

Most often, people throw away these things with great regret. However, if the product is dear to you as a memory or necessary in everyday life, you can try gluing it together.

Questions immediately arise. ? Which glue to choose for gluing porcelain? Is it possible to prepare your own adhesive solution for ceramics?

It should be noted here that today there are a lot of varieties of glue and it is necessary to build on its universal properties.

Henkel Moment glue
UHU Creativ glue for crafts
Universal Moment

VIDEO INSTRUCTION

Glue can be natural or synthetic. You can prepare an organic adhesive solution for ceramics yourself.

To do this you need:

Dissolve 100 grams of slaked lime and 100 grams of sugar in one liter of water.
Once the water boils, cook the solution for three hours.
Afterwards, let the lime-sugar mixture settle and drain the water.
Add 0.5 kg of crushed tile adhesive, for example from Knauf.
Do not touch the resulting mixture for 12 hours.
Use the resulting adhesive solution cold.

You can also use synthetic glue; it is sold in special construction stores.

The most suitable options are:

Mekol,
Elastostil-2,
Mars,
Rapid,
MC-1,

They perfectly glue ceramics and earthenware and have high technical performance.

If this happens and you break a ceramic vase, a chip occurs on the handle of a kitchen cup, or something dear to you cracks, you need to figure it out. how to glue ceramics to ceramics.

To do this, you can purchase narrow-profile ceramic adhesive.

Ceramic is much more difficult to glue than porcelain.

Therefore, you should be guided by the basic rules:

We clean the surfaces to be glued from dirt and dust.
We degrease the component parts of the object, and then dry them well.
Apply a thin layer ceramic glue to the required area.
If the parts to be glued have an uneven texture, apply a second layer of glue.
Connect the parts to be glued, pressing them down with force.
Fix the product in a clamped state for the period of time specified in the glue instructions.
You can use the item again after a couple of days, when the glue has completely set.

To fix the product to be glued, you can use a tourniquet, and if the object is small, stick it into a container with sand. This will contribute to reliable gluing and tight connection of all parts into a single whole.

How to glue porcelain

To repair a porcelain product you will need:

epoxy glue such as EDP,
container for diluting glue,
stick for applying the composition.

Operating procedure:

1.Mix the resin and hardener in a ratio of 1:10 and heat with a household hair dryer.

2. Apply the composition to the place where we will glue the fragments. Leave for a few minutes.

3. We connect the fragments of the broken product.

For complete drying, it must be left for 24 hours.

For gluing ceramics and earthenware, you need to follow the same rules. First, prepare the connecting parts by cleaning them from various types of contaminants, degreasing them with a solvent and drying them.

If you need to glue small pieces together, choose cyanoacrylate-based glue. It is packaged in small tubes and is suitable for one-time use only.

If you have to glue large parts, you can weld the glue yourself.

Use six parts of liquid glue,
Two parts of sifted river sand and,
One part crushed glass. This composition will give the glue strength and quality, but after gluing the seam will remain noticeable.

VIDEO ON THE TOPIC

An easy DIY option is casein-based glue. To prepare it you will need water, borax, casein, and a few drops of formaldehyde. This mixture will harden in 2-3 hours. And yet, many resort to gluing ceramics and earthenware adhesive solution based on gypsum.

Do not rush to throw away a damaged item, be it a porcelain vase, ceramic cup, or earthenware sink. Try to breathe a second life into your favorite piece of furniture on your own.

Products made of porcelain and ceramics can be glued with adhesives “Mars”, “Polyvinyl acetate”, BF-2, “Rapid”, MTs-1, “Mekal”, “Kittifix”, “Supercement”, Ago”, “Elastostil-2”, EDP , EPO, "Latex" and "Unicum". However, it should be taken into account that Supercement and Ago glues do not form sufficiently strong seams, BF-2 glue is colored, and polyvinyl acetate glue is not waterproof.

When gluing porcelain with Rapid, Ago, Mars, MC-1, Latex, Unicum, Kittifix and Mekol adhesives, degrease the surfaces with a swab moistened with acetone, apply a layer of glue to both surfaces and let Let it dry for about 20 minutes. After this, apply a second layer of glue, connect the surfaces to be glued, pressing them firmly against each other using a rubber band, clamp or some other device, and keep them in this position for 3 hours. The final setting of the seam occurs within 2 days.

When working with “Rapid”, “Ago”, “Kittyfix” and “Mekal” adhesives, you can use another method: coat the grease-free surfaces with glue only once and immediately connect them, squeezing them with a tourniquet or in a clamp.
Porcelain can be glued using Elastostil-2 glue. This is a two-component waterproof adhesive that is sold packaged in two aluminum tubes. Before use, the contents of the tubes are mixed in a 1:1 ratio and mixed thoroughly. Surfaces must first be degreased and thoroughly dried. The prepared glue is applied to both surfaces and the parts are compressed.

During the 3 days while the adhesive joint is setting, under no circumstances should water fall on it.
Strong and waterproof adhesive seams are produced by EDP, Mekal, EPO, Mars, Rapid, Kattifix, Elastostil-2, Latex and Unicum adhesives.

For gluing sanitary ware made of porcelain and ceramics, in addition to traditional adhesives, compositions that you can make yourself are also used.

To glue glass or porcelain products that will not be exposed to heat, you can prepare a paste of gypsum and quicklime: 50 g of gypsum, 10 g of quicklime, 1 egg white and 10 g of water are mixed immediately before use.

To glue porcelain or ceramics, 10 g of kaolin and 1 g of calcined borax are mixed with water to a paste. Products glued with such a paste are fired over high heat until light red heat. The seam is heat and water resistant.

To glue porcelain products, you can prepare the following paste: mix 20 g of ready-made casein powdered glue with 8 g of silicate glue. In this case, the glued product will not be afraid of water, since the result will be a fairly water-resistant adhesive seam.

To glue porcelain objects, you can also prepare a composition of wood glue: add 12 g of starch and 7 g of chalk to the wood glue solution. The resulting mixture is thoroughly mixed. The glue is not heat resistant.

To glue glass objects, take 100 g of liquid glass per 20 g of dry casein glue. When gluing glass with this composition, the contact method is used: a layer of glue is applied to both surfaces to be glued and allowed to dry slightly. After this, the objects to be glued are connected and heated strongly.

Porcelain and earthenware can be glued with a paste, which is obtained by adding gypsum to a 3% gelatin solution. The paste is prepared immediately before use. Another glue for gluing porcelain and earthenware is also prepared on the basis of gelatin: a 25% gelatin solution is mixed with an equal amount of vinegar essence.

There are ceramic products in every home. Sometimes they do not meet the declared quality, and some do not last as long as we would like. What to do if your favorite plate or cup breaks? There is always a way out, even in such a situation. All that remains is to figure out how to glue the ceramics together.

What does the technology for reconstructing dishes look like?

This process consists of several simple steps. It consists:

In gluing the parts of a broken object.
In processing joints by special means or liquid glass.
In careful cleaning of the surface, which includes cutting off any remaining adhesive.

What is better to take for gluing

When you want to extend the life of ceramics, it seems that in this case all means are good. These tiny interior or serving details not only decorate the room, but also become an integral part of the home. Without them it is difficult to recreate the comfort in the house.

Do not rush to throw broken ceramic products into the trash bin. It's worth trying to repair the trinket.

Restoration adhesive options

Is it possible to glue ceramics securely without harming your health? This question is asked by many people faced with such a need.

Adhesive compounds are one of the common options for joining parts. They are presented on the market in a wide range and contain an adhesive substance. The scope of application of such products is the repair and reconstruction of products, ceramic dishes and decorative items made of ceramics and earthenware. These two materials are often combined, since the glue for one and the other is the same, which makes it universal.

Don't know what glue to use to glue ceramics? A good option is a mixture based on cyanoacrylate. This is the optimal combination of price and quality. You can buy superglue at any specialty store.

Among other common options for adhesives for ceramics, experts note the following:

"Second".
"Super moment."
"Cyanopan."
"Glue."
"Force".
"Monolith".
"Elephant".
"MARS" (imported waterproof glue for ceramics).
PVA used to restore food-grade ceramic products. But this option is suitable only for those products whose surface is not varnished.
F-2, BF-4 - for all types of ceramics.

Repair: how to get rid of chips on a toilet

No one is immune from the formation of cracks or chips on the toilet. This is a problem that is a serious nuisance, but solutions to it, other than replacing the plumbing, exist (even if they are temporary).

Remember that gluing will not provide the former reliability and strength of the structure. As a result (sooner or later), the toilet will have to be replaced. Restoration will only delay this need.

Don't know how to glue ceramics or sanitaryware? They can be firmly connected using the following compositions:

"Rapid".
"MARS".
"Unique".
MC-1.
BF-2.

If the possibility of purchase ready-made composition is not suitable; as an alternative, you can use homemade glue. The article presents the three most popular methods of preparing a mixture for restoring a toilet.

Method 1

Ingredients:

pure water;
borax;
casein;
formaldehyde or aluminum alum.

After mixing the main portion of the components, add a little more water to the mixture. To give the composition water resistance, which is especially important when working with plumbing, take 3-4 drops of formaldehyde or aluminum alum. The resulting composition can be completely cured after 120-180 minutes.

Method 2. Based on shellac and turpentine

Another option for gluing ceramics.

Ingredients:

turpentine;
light shellac.

Combine the ingredients and place the container over low heat. The mixture requires cooking until the shellac has completely melted. During preparation, the glue is constantly stirred until a homogeneous consistency is obtained. This composition takes longer to harden, so it can be prepared as a backup option. The mixture is allowed to cool and, divided into portions, placed in storage or used to treat cracks or chips in the toilet bowl.

As necessary, it is heated and applied in a thin layer to the surfaces to be bonded. As a result, the reinforced parts are compressed, which ensures their tight adhesion. The resulting glue residue should be wiped off immediately.

Method 3. Based on lime, chalk and liquid glass

Please note that this glue should be prepared immediately before application, as it sets quickly.

Ingredients:

quicklime;
liquid glass.

All components are mixed and used to restore a ceramic or earthenware toilet.

Now you know how to glue a ceramic toilet, and you can easily put the recipes described above into practice.

How to carry out the procedure correctly

The process is simple, and the technology consists of several simple steps. Step by step it looks like this:

Collect all the parts that need to be connected. If you are re-gluing a broken cup or vase, then it is worth removing the remaining substance from the previous time. A knife is used for this.
Wash the parts in warm water using dish soap or other gel-like substance (shower gel, shampoo, etc.). After this, rinse the fragments, set them aside until completely dry, but do not wipe them, as you may get hurt on the sharp edges or break small corners.
Place all the pieces for gluing together like a puzzle.
Treat the joints with acetone.
Carefully apply a thin layer of glue to the gluing areas using a brush or ear cleaning stick.
Leave the first layer to dry.
Apply a second layer and press the adhesive parts together (hold for several seconds). Taking a cloth, remove the remaining mixture.
Then connect the glued part with another fragment (it is advisable to do this after some time so that the previous parts stick well).
Fix the product well. This will ensure a secure grip.

Now you know how to glue ceramics. Since you are working with glass, you should take precautions, for example, wear rubber gloves to prevent minor cuts or wounds on your hands.

Following the algorithm described above and understanding how to glue ceramics together, repairing ceramic or porcelain products is not as difficult as it might seem at first glance.

Remember that restored items are no longer suitable for use in the kitchen. When sour or salty food is placed in such a container, a caustic substance that is dangerous to human health is released, contained in the glue and reacting under certain conditions.

Now you know the best way to glue ceramics or porcelain products and how to act in different situations related to the restoration of objects and even plumbing fixtures.

Every home has a piece of ceramic or porcelain. How often does it happen that dishes break? It can be a crystal glass, a porcelain cup, a ceramic plate, or an ordinary ceramic figurine. And, despite the fact that ceramic dishes are strong, they still break. If expensive dishes were broken, then after repair you should treat the bonding areas with special dyes, or some experts advise using liquid glass. After drying, carefully cut off the remains so as not to touch the part where the repair was made.

The best way to glue ceramics and porcelain

I would like to extend the life of ceramics. It is not only used for its intended purpose, but also decorates the interior with its originality and uniqueness. It’s hard to say which is better ceramics or porcelain in terms of quality and durability, it all depends on various factors.

How to glue porcelain and ceramics? Which glue for porcelain and ceramics should I choose? Or maybe throw away the broken product? Should I throw away the broken vase or not? If not, how to glue a ceramic vase?

Don't rush to throw it away. You can always throw it away. First you need to try to glue the product, and if nothing works, then you can throw it away. Throwing it away is the last thing left to do.

How to glue ceramics

Various adhesives are used to repair ceramics. There are a huge variety of products available on the market for repairing ceramic cookware.

Universal super-glue based on cyanocrylate is the optimal adhesive for ceramics, which can be easily found in any specialized store.

The following Russian-made adhesives for repairing ceramic tableware are offered for sale: “Second”, “Super-moment”, “Cyanopan”, “Glue”, “Sila”, “Monolith”, “Elephant”. There are also imported adhesives for gluing. The best waterproof glue for ceramics is MARS.

How to glue porcelain

The following range of adhesives for porcelain is offered for sale – STANGE, “cosmofen ca-12”, you can also use “RAPID”. Among Russian-made adhesives, carbinol glue should be noted. Also, instead of glue for repairing porcelain, you can use epoxy resin EPOXY GLUE produced by BONDO, BIZON or similar adhesives.

To glue porcelain, you can use cement made from gypsum. To do this, add the white of 1 egg to the gypsum powder and mix very well. The resulting glue can be used to glue porcelain. Moreover, the gluing procedure should be performed very quickly, because this glue hardens quickly.

For gluing, you can make other glue at home. To do this, mix 1 egg white and soda. Beat Belov into foam, without adding soda. The whipped white should sit for one day, and only then add soda to the settled white and mix. You should add enough soda to get a mass similar in consistency to regular dough.

To do this you should:

Take 1 liter of water. Add 100 g to water. Sugar, 100 gr. lime (necessarily slaked). Place the resulting mixture on the fire and cook over low heat for about 3-3.5 hours. The main thing when “cooking” is that it does not boil.
Cool the resulting broth and let it sit for a few more hours.
The water that remains after settling must be drained.
Add 0.5 kg to the mixture. tile adhesive. Mix well and leave to settle again for 10-15 hours.
If there is excess water, it must be drained. Boil the resulting mass one more time.
Cool. Porcelain glue is ready.

This adhesive for food utensils is ideal.

Universal adhesives for both materials

There are a huge number of universal adhesives. These are adhesives that can be used to glue both porcelain and ceramics - casein glue, epoxy adhesives. The most popular is Porcelan Potch glue. Edible glue is often suitable for gluing both ceramics and porcelain. For example, the recipe described above can be used as an adhesive for ceramics and porcelain.

How to glue porcelain

Gluing porcelain at home with glue is quite simple; for this you can use food grade porcelain glue. If you use one of the following adhesives for gluing - “Rapid”, “AGO”, “Kittifix” and “Mekol”, then you should perform the following steps:

Wash and dry surfaces for gluing;
Wipe with acetone;
Apply one layer of glue to the gluing areas and immediately glue the parts together, pressing tightly.
You can fasten it with a tourniquet for strength.

For gluing, craftsmen advise using super glue.
Prepare surfaces for gluing - wash, dry and wipe with acetone. If the part breaks in the same place, remove any remaining glue.
Gather the parts in advance.
The process of applying glue is the same. Glued in two layers.
Then the glued product should be placed, if they are not large, they should be placed in a saucepan or cauldron, filled with warm water and put on fire. Boil water over low heat for 2-3 hours. The product is left to cool in water. And only then, when the water has cooled, is it removed.
If it is not possible to “boil” the product, then you can “warm it up” in the oven, or hold it over an electric stove (but in this case, the “warming up” procedure must be performed very carefully so as not to overheat the product and not get burned).

It may happen that a crack has formed in a vase or cup, or a fragment has fallen off, and a small hole has broken off.

Then the gluing algorithm is as follows:

The preparation for gluing is the same.
First you need to cut out a patch, the size of which should be 0.5 - 1.5 cm larger. You can use super glue for ceramics; natural glue is also suitable for gluing a patch.
Be sure to take a waterproof one for repairs.
Pour water into the product, but start the patch, but so that the water does not come into contact with the patch.
Then boil the water for 2-3 hours.
Cool everything. And pour out the water.
If necessary, treat the gluing area with paint.

Repair of porcelain figurines is carried out in a similar way. But after the figurine has dried, it is recommended to cover it with several layers of varnish for greater durability. Each subsequent layer of varnish can be applied only when the previous layer of varnish has already dried well. After varnishing, the figurine will be a little heavier and will not be as fragile.

How to glue ceramics

Gluing ceramics at home is quite simple. You just need to follow these rules:

We start by collecting all the parts that need to be glued together. If you need to glue a previously repaired cup or vase, then remove the remaining glue with a knife. And when everything is removed from the surface, you can move on to the next step.
Wash all assembled parts thoroughly in warm water. For washing, you can use dishwashing detergent. Then rinse and let drain. It is not recommended to wipe, so as not to cut yourself with sharp edges or break something from the edges of the part.
We hide all the details before gluing, so that we know in advance what to glue where.
We treat the gluing areas with acetone.
Apply an even thin layer of glue to the gluing areas. To apply the glue, you can use either a thin brush or an ear cleaning stick.
Just leave the first layer of glue to dry.
Then apply a second layer of glue. And press down the parts that need to be glued. Let's keep the details for a few minutes. Then remove the residue with a cloth.
It is advisable to glue the other part after some time, so that the previous parts stick well.
After the product is glued, it is advisable to fix it. And in this way everything will grasp not only correctly, but also well.
A part is considered well repaired if it has been standing for 1-3 days (depending on the repair performed).

Since broken parts are, after all, glass, it is recommended to wear rubber gloves during repairs in order to protect your hands from minor cuts and wounds in advance.

When gluing, if necessary, you can and should use tweezers, for example, to work with small parts.

Repairing porcelain and ceramics is very easy to do according to the algorithm described above.

Do not forget that all repaired products are no longer advisable to be used for food. Because if you place sour or salty food in such a product, harmful substances contained in the glue will begin to be released. And this is very harmful to health.

As a result, you know how to glue ceramics, how to glue ceramic dishes, and how to glue porcelain. Which glue to choose or prepare the glue yourself.