Self-adhesive bitumen sealant tape. NICOBAND sealing tape. Sealing tapes - easy to use

Nikoband sealing tape is produced by one-sided application of a self-adhesive bitumen-polymer binder, consisting of bitumen, a polymer modifier and special adhesive additives, onto a UV-resistant foil film.

Anti-adhesive is used as a protective layer on the side of the self-adhesive composition of the sealing tape. polymer film.

Application area

Self-adhesive sealing tape Nicoband is intended for use in the repair and construction of buildings and structures, both indoors and outdoors.

Main Applications

• Sealing seams and joints in structures made of various materials(concrete, metal, wood, plastic, etc.)
• Arrangement of connections on flat and pitched roofs
• Repair of roofs made of various materials, repair of drainage systems (metal and plastic);
• Sealing vapor barrier films
• Sealing the joints of structures made of cellular polycarbonate (canopies, canopies, greenhouses, etc.)
• Waterproofing wooden products in concrete and stone structures(window and door blocks)
• Vapor and waterproofing of assembly joints when installing thermal insulation from foamed polyethylene;
• Noise and vibration insulation of metal plumbing products (sinks, bathtubs), metal window sills

Advantages of Nicoband tape

Color spectrum

Silver

Brown

Red

Green

Mode of application

The surface must be smooth, dry and clean. Cut the tape to the required length, remove protective film, stick the tape on required area and press it tightly. If the temperature is below +5 °C, it is necessary to maintain NIKOBEND at room temperature at least 12 hours. The use of the material at sub-zero temperatures requires additional heating of the surface. It is not recommended to use the tape on surfaces with an inclination angle > 55° and operating temperatures above 80°C.

1. Clean and degrease

2.Measure and cut

3. Remove the film

4. Lay and press

Specifications

Sealing joints building structures – mandatory type repair and construction work carried out for the purpose of protecting internal elements from destructive moisture. The use of mastics and sealants in some cases is impossible: the paste-like material “falls” into the seam without having time to form protective layer. Under such circumstances, sealing tapes - optimal solution for insulation and repair of seam roofing, metal tiles, drainage systems, joints, junctions, etc.

The Roofing and Insulation online store sells tapes and strips for waterproofing, offering reasonable prices for all products and prompt delivery.

Our assortment includes products from the TechnoNIKOL plant ( Nicoband, Ceresit), Mage and others, which brings together advanced solutions in the field of construction technologies.

Roof sealing tape Nicoband TechnoNIKOL

Bitumen-polymer self-adhesive tapes Nikoband ( TechnoNIKOL) are easy to use. Applied to the bottom layer adhesive composition, modified with thermoplastic elastomers and providing reliable adhesion to various surfaces: wood, glass, concrete, metals, polymers. The top layer is a foil, UV-resistant film that acts as a moisture barrier.

Nicoband sealant tape has the following advantages:

• air and water tightness;
• aluminium foil Reliably resists UV rays, so it can be used outdoors;
• guaranteed service life of at least 10 years;
• a wide choice of coating colors allows you to perform waterproofing to match the main one roofing material without disturbing the aesthetic appearance;
• high adhesion strength to any surface;
• styling down to -5 °C.

In our store you can buy double-sided sealing tapes Nicoband Duo, designed for insulating and gluing surfaces. They are excellent for hidden seams of roofing coverings and membranes, installation of thermal insulation, and waterproofing of pipeline elements at joints.

Waterproof tapes Ceresit

The material perfectly insulates corner and connecting seams of building structures and is used in conjunction with Ceresit mastic. Ceresit tape on a non-woven basis, which is a polyester mesh, is glued into the first layer of waterproofing and provides protection against moisture penetration.

Scope of application: waterproofing layer under ceramic tiles, places where utility lines pass, joints between floors and walls.

The main advantages of waterproof ( sealing) Cezerite ribbons:

• thin, but at the same time has high strength and elasticity;
• UV resistant;
• environmentally friendly, does not emit harmful substances;
• provides a reliable barrier to the penetration of liquids and condensate;
• used for external and internal work;
• durable.

You can purchase seals on our website ( foam strips) for metal tiles, smooth and corrugated Mage tapes in different sizes.

Sale of waterproofing tapes in Moscow

We hope that the Roofing and Insulation store's diverse selection will meet your needs. Low cost waterproofing materials, seals and sealants, operational processing orders will allow you to complete repair and construction work economically and without delay.

Fill out an application on our website and make sure: you can buy building materials quickly and profitably!

Self-adhesive tape Nikobend from the TechnoNIKOL company is a sealing and waterproofing bitumen-polymer film. The bottom surface provides impeccable and high-quality adhesion to various surfaces: metal, slate, wood, plastic, plaster, concrete, glass, etc.

Nicoband sealing tapes can be purchased in our online store at wholesale prices. Delivery from a warehouse in Moscow and the Moscow region. TechnoNIKOL products are available with a quality guarantee. Products are produced by one-sided application of a bitumen polymer modifier and special adhesive additives to a UV-resistant foil film. An anti-adhesive polymer film is used as a protective layer on the side of the self-adhesive composition of the sealing tape.

Advantages of Nikobend self-adhesive tape

• Tape sealant is reliably protected from UV radiation
• The sealing bitumen layer Nikobend is protected from UV rays by an aluminum coating. This makes it possible to use it outdoors without restrictions.
• Easy to use and durable
• Nicoband sealant is very simple to use and does not require special skills. Thanks to a layer of bitumen-polymer binder of a special composition, it perfectly performs sealing functions throughout its entire service life (10 years).
• Various coating colors
• The color range of the tape was developed taking into account the most common shades of roofing coverings (including metallized). Allows you to carry out repairs or preventive waterproofing to match the main surface without disturbing the appearance.
• Perfect adhesion to various surfaces

Physical and mechanical characteristics of the sealant

Dimensions:

• Length 3 m. Width: 5; 7.5; 10; 15 cm.
• Length 10 m. Width: 7.5; 10; 15; 20; 30 cm.

Scope of application of Nicoband TechnoNIKOL

TechnoNIKOL sealing tape is intended for use in the repair and construction of buildings and structures both indoors and outdoors. The main areas of application of Nicoband tape sealant:

• Sealing seams and joints in structures made of various materials (concrete, metal, wood, plastic, etc.);
• Installation of junctions on flat and pitched roofs;
• Repair of roofs made of various materials, repair of drainage systems (metal and plastic);
• Sealing of vapor barrier films;
• Sealing of installation joints when installing a drainage layer from profiled “Planter” membranes;
• Sealing tape for waterproofing metal pipes cold water supply;
• Sealing the joints of structures made of cellular polycarbonate (canopies, canopies, greenhouses, etc.);
• Waterproofing of wooden products in concrete and stone structures (window and door blocks);
• Steam - waterproofing of assembly joints when installing thermal insulation from foamed polyethylene;
• Sealing metal and plastic car vans, boat repairs;
• Noise - vibration insulation of metal plumbing products (sinks, bathtubs), metal window sills.

Mode of application

The surface must be smooth, dry and clean. Cut the tape to the required length, remove the protective film, stick it to the desired area and press it tightly. If the temperature is below +5 °C, it is necessary to keep Nikobend at room temperature for at least 12 hours. The use of the material at sub-zero temperatures requires additional heating of the surface. It is not recommended to use the sealing film on surfaces with an inclination angle > 55° and operating temperatures above 80°C.

Sealing tape is becoming more common today in different areas construction. It is a product that has unique characteristics. The described tape is used not only for insulating windows and doors, but also for structures made of glass and plastic. It has also found its application when it is necessary to protect concrete, cement, tiles and bitumen.

general description

On the building materials market today you can find tapes that are intended for waterproofing. You can choose from a wide range of materials that have foil protection and are also made of natural copper. If necessary, you can select a tape that includes Thus, this product found widespread use in repairs and construction.

Butylene tape

The sealing tape is a universal self-adhesive material made on a butyl rubber base. During the production process, it is covered with aluminum sheet, which has high strength characteristics. The adhesive composition has special protection in the form of a silicone film. Butylene can be considered ideal for sealing, as well as gluing insulating layers. Among other things, it is used to protect surfaces made of various materials such as wood, plastic, steel, glass and aluminum.

Butylene is characterized by chemical neutrality, which makes it compatible with all types of PVC. Butyl rubber sealing tapes are indispensable in cases where there is a need to carry out effective and quick repair. Consumers note ease of use, as well as excellent grip quality and durability. Butylene can be used in any complex climatic conditions, which are characterized by a fairly wide temperature range.

The manufacturer took care of the presence of a reinforced metal coating, which ensures the durability of the material. Due to such characteristics it became possible to create protection against exposure ultraviolet rays, alkalis, acids and all kinds of contaminants. If you follow the technology of using the tape, this will ensure high-quality protection and insulation of the base for a long time.

Characteristics of butylene

Butyl rubber sealing tapes have a standard length of 10 m. As for the width, it can vary from 5 to 30 centimeters. The thickness of the tape varies from 0.6 to 1 millimeter. Operating temperatures range from -60 to +120 degrees. Produce installation work it is possible if the thermometer is at a level not lower than -10 and not higher than +40 degrees.

Area of ​​use

Double-sided self-adhesive butyl sealing tape is used for interior and exterior work. It is indispensable for sealing joints and seams of structures made of plexiglass, polystyrene, metal, polyethylene, wood, stone, concrete, PVC and other materials that require water and vapor tightness.

Technology of use

Double-sided self-adhesive butyl sealing tape should only be applied to a substrate that is free of dirt, dust and dry. It should be low fat. If you have to work with particularly porous surfaces such as plaster or concrete, it is recommended to apply a primer in advance. It is important to choose the correct thickness and width of the tape.

Next, the material is unrolled to a certain length and cut to size. The technician must remove the protective film and then apply butylene to the base. For high-quality fixation, the material must be pressed and rolled with a roller. A quality result can be guaranteed by ensuring the tape overlaps, the width of which should be 50 millimeters.

Positive characteristics

The sealing tape described above has high adhesive ability even at low temperatures. Among its features are heat resistance, as well as the ability to use with any materials. The surface of the tape can be affected without causing harm. chemical substances. It is odorless and long-lasting.

Bitumen-polymer tape

This material is an anti-corrosion and sealing bitumen-polymer tape. It has a coating made of low density polyethylene. The self-adhesive composition is protected by an anti-adhesive silicone film. Self-adhesive sealing tape is specially designed for dielectric and anti-corrosion protection, as well as for insulating the linear zone of metal underground pipelines for various purposes. Using it, you can protect joints, corners, plugs, as well as tap-in points from water. This material is irreplaceable and, if repairs are necessary, it can be used in conjunction with other bituminous materials.

Advantages

The self-adhesive sealing tape has excellent dielectric resistance, as well as the ability to follow the irregularities of the insulated units. It exhibits adhesion to most materials. In case of cuts and punctures, this sealant demonstrates the ability to self-seal. It can be exposed to chemicals that are not capable of having a harmful effect. IN field conditions The tape can be used quite simply.

The sealing tape described above is packaged in polyethylene. The rolls have dimensions equal to 10 meters, which is true for the length, while the width is 20 cm. The material should be stored in a closed, dry room, maintaining a temperature ranging from +5 to +40 degrees. Once manufactured, the material must be used within a year. Transportation can be carried out without following certain rules, so these manipulations are not subject to restrictions.

Bitumen tape and its characteristics

Nicoband sealing tape is made on the basis of bitumen. It is technologically advanced and can protect against exposure to solar radiation. Among other things, its characteristics include water and air tightness. The material is environmentally friendly, and the tape can be used at temperatures not lower than -5 degrees. It is used on the side of moisture exposure both inside and outside the building. The material contains aluminum foil, which is highly durable, and is also made on the basis of bitumen.

Area of ​​use

Bitumen sealing tape is used for final sealing. This material is also irreplaceable when sealing hidden seams. Great for renovations bitumen roofing. When there is a need to repair the gutter tube, as well as temporarily fix the insulation or carry out anti-corrosion protection, then this sealant is an excellent solution.

In order to increase the adhesion characteristics with brick or concrete, it is necessary to perform several manipulations. Removed from the base upper layer using a wire brush. The latter can be replaced. Next, processing is carried out and after that the master must wait until the top composition dries. The next step is gluing the tape and rolling the material over the surface. Bitumen sealing tape is most often used to seal junctions of building structures.

Characteristics of tape for polycarbonate

Sealing tape for polycarbonate is intended to protect seams and cracks, as well as joints of the mentioned material. In this case, surfaces located inside or outside can be protected. This material is not capable of allowing air to pass through and is completely inert to solar radiation and water. It is easy to fix on the base, and installation is carried out at the same temperatures, so the thermometer mark should not fall below -5 degrees. During the production process, aluminum foil is used, on which an adhesive base is applied. To work with tapes, you do not need special skills; the main condition is the removal of dust, all kinds of contaminants and degreasing.

Price

The above aluminum sealing tape may have different costs depending on the width. For example, if this indicator is equivalent to 2.5 centimeters, then the price will vary within 480 rubles. With a more impressive width, which is 3.8 cm, the consumer will have to pay 660 rubles.

Description of swellable sealing tape

This material is also called a swelling cord and is a product that can be rectangular or round. Hydrophilic rubber is used in the production process. The material begins to swell after exposure to water, while increasing in volume, filling all the space between concrete structures. Thanks to this quality, excellent sealing of the elements is achieved. Even after mechanical impact on cracks and seams, when the latter are opened, the tightness remains just as reliable. Swellable sealing tape can be used for appropriate work when there is a need to manipulate concrete, PVC, metal, glass, natural stone or all sorts of combinations.

Application area

The tape is used on industrial facilities by type of bridges, underground galleries. The material is also indispensable in civil engineering, when there is a need to waterproof elements and structures basements, underground parking lots, civil defense buildings. Waterproofing of this type is also used in pumping stations, swimming pools, water pipelines and water tanks. Sealing with a cord can be ensured in joints between precast reinforced concrete elements and in cold joints of concrete structures.

Positive characteristics

The tape allows for efficient and reliable sealing elements due to an increase in volume up to 6 times after exposure to water. The material has high frost resistance and demonstrates unsurpassed durability during operation, which is very popular with consumers and professional companies. Its use is economical, and the cost is lower when compared with other sealing methods. There is no need for additional preparation of the joints, which indicates ease of installation and assembly. The tape does not lose positive qualities with a multiple increase in volume. It is chemically stable, environmentally friendly and unpretentious to transportation conditions. That is why you can even carry out transportation yourself, without ordering the appropriate equipment, which will allow you to save money.

Tapes for household use

Sealing tape for the bathroom may be the only right solution when the need arises to carry out the appropriate work. Experts advise using this technology, as it is highly resistant to mold and mildew and is more durable than other sealing options. Among other things, you will be convinced that this technique will not take much time and will not take away physical strength. Experts advise taking the issue of choosing such a sealant especially seriously, since the material that will be used at home has much fewer requirements than the one that is used under aggressive influences external factors. This will eliminate the possibility of overpaying for material.

Sealing joints remains one of the weakest points when it comes to a continuous waterproofing coating. This problem is effectively solved by NICOBAND series tapes.

Self-adhesive NICOBAND tape in fact, it is a familiar and well-known construction tape, which has a number of distinctive advantages such as: a thick sealed bitumen layer, which allows not only to seal joints, but to seal surfaces; strength; elasticity; good adhesion with any building materials; durability; ease of use; resistance to moisture and UV radiation.

The NICOBAND series includes three brands: NICOBAND, NICOBAND DUO, NICOBAND INSIDE.

NICOBAND tape

NICOBAND is produced by one-sided application of a self-adhesive bitumen-polymer binder onto a UV-resistant foil film. An anti-adhesive polymer film is used as a protective layer on the side of the self-adhesive composition.

The color range of the tape was developed taking into account the most common shades of roofing coverings (including metallized). Allows you to carry out repairs or preventive waterproofing to match the main surface without disturbing the appearance of the sealed element.

Application

Self-adhesive tape is intended for use in repairs and construction both indoors and outdoors.

Sealing seams and joints in structures made of various materials (metal, wood, plastic); arrangement of junctions on flat and pitched roofs; repair of drainage systems; sealing vapor barrier films; sealing assembly joints during installation; waterproofing of metal pipes for cold water supply; sealing the joints of structures made of cellular polycarbonate; waterproofing of wooden products in concrete and stone structures (window and door blocks).

Price

Nikobend (3 m x 5 cm) – 206 RUR/roll

Nikobend (3 m x 7.5 cm) – 254 RUR/roll

Nikobend (3 m x 10 cm) – 302 RUR/roll

Nikobend (3 m x 15 cm) – 429 RUR/roll

Nikobend (10 m x 7.5 cm) – 531 RUR/roll

Nikobend (10 m x 10 cm) – 665 RUR/roll

Nikobend (10 m x 15 cm) – 972 RUR/roll

Nikobend (10 m x 20 cm) – 1254 RUR/roll

Nikobend (10 m x 30 cm) – 1829 RUR/roll

Color spectrum

Silver, red, green, brown, gray

NICOBAND DUO tape

This is a self-adhesive sealing and waterproofing bitumen-polymer tape.

NICOBAND DUO is produced by one-sided application of a self-adhesive bitumen-polymer binder onto an anti-adhesive polymer film. An anti-adhesive polymer film is used as a protective layer on the other side of the self-adhesive composition.

Application

Sealing seams and joints between two surfaces in structures made of various materials (concrete, metal, brick, wood, plastic, etc.); sealing roofing clamping strips and other fastenings on the roof; hermetic connection on the roof between sheets of slate, metal tiles, etc.; sealing internal connections of sewer and other cold pipes; internal sealing of assembly joints when installing a layer of profiled PLANTER membranes.

Price

Nikobend Duo (3 m x 10 cm) – 290 RUR/roll

Nikobend Duo (10 m x 10 cm) – 641 RUR/roll

NICOBAND INSIDE tape

This is a self-adhesive sealing and waterproofing bitumen-polymer tape.

NICOBAND INSIDE is produced by one-sided application of a self-adhesive bitumen-polymer binder to an anti-adhesive polymer film. Non-woven polypropylene (Spunbond) is used as a protective layer on the other side of the self-adhesive composition, which allows the tiles to be laid directly on NICOBAND INSIDE, without the use of a protective screed, which significantly reduces installation time.

Application

Self-adhesive tape is intended for use in repairs and construction inside buildings and structures.

Installation of connections to walls and other protruding parts when waterproofing floors interior spaces from rolled and mastic materials; waterproofing devices for internal premises without the use of protective cement-sand screed, with direct installation ceramic tiles for waterproofing; sealing ventilation systems (ducts, flexible air ducts); sealing various cold pipelines without exposure to direct sunlight.

Price

Nikobend Inside (3 m x 10 cm) – 290 RUR/roll

Nikobend Inside (10 m x 10 cm) – 641 RUR/roll

Physical and mechanical characteristics NIKOBEND self-adhesive sealing tapes are given in the following table.