Roofing carpet uniflex. Roofing material uniflex. Uniflex material modifications

Roofing material, including the arrangement of waterproofing, which is called Uniflex, is produced by TechnoNIKOL. This material belongs to the class "Business". In addition to the Uniflex brand, Ecoflex also belongs to this class from the category of rolled bitumen-polymer building materials. The main advantage of these brands can be called a long service life, the minimum period is 15 years, and the longest is 25 years.

Initially, it is worth mentioning that three types of bitumen rolls are produced under the Uniflex brand. Let's take a closer look at this material:

1. In principle, Uniflex is a waterproofing for various structures.
2. Uniflex VENT EKV, TPV, EPV is used for the arrangement of ventilated roofs. The designation "EPV" and "TPV" on the material indicates that they can only be used for the lower layers of roofing carpets, but the designation "EKV" indicates that outer layer of this material is covered with coarse-grained dressing, and is intended for laying as the outer layer of the roof. For repair work on old roofs, which do not need to be completely dismantled, and there is no certainty that the insulation under the old coating will be dry, the installation of Uniflex VENT will be an excellent solution. Since this roofing material is breathable and will not allow swelling of the coating from the inside.
3. Also, the Uniflex coating can be marked with the marking "K" and "P". "K" indicates that the outer layer is made using coarse-grained dressing, and "P" is the outer layer of polymer film. The second type is used for arranging waterproofing in the form of an inner layer. roofing cake, and the first type is for the outer layer.

Bitumen-type impregnation, which is used in this material, incorporates SBS thermoplastic and fillers. The manufacturer does not declare any restrictions on the climatic conditions for the use of this roofing material.

Consider some technical qualities TechnoNIKOL Uniflex, which is used for arranging roofs.

The Uniflex EPP marking indicates that polyester is taken as the base, and the lower and upper layers bituminous coating protected by a polymer film. The material has a thickness of 0.28 centimeters, and the mass of the square of the canvas is almost 4 kilograms. To tear such a web longitudinally, it is necessary to apply a force of 500 N. Well, to break the web across, it is necessary to apply a force of 350 N.

Uniflex Chamber of Commerce and Industry has the same mass and thickness, but fiberglass is taken as the basis here. The protective layer is a polymer film, but due to the use of a different type of base, it is much stronger. For a longitudinal rupture, it is necessary to apply a force of 800 N, and for a transverse rupture, 900 N. The material with any marking retains its flexibility on a bar with a diameter of 0.5 centimeters at a temperature of - 20 degrees.

Uniflex HPP

Uniflex HPP can withstand the smallest breaking force, it has fiberglass as a basis and can be torn with a force of 294 N. All of the above material of any type is produced in rolls, each roll is 10 meters long and 1 meter wide. The level of heat resistance is quite high and reaches 95 degrees.

Uniflex EKP is equipped with external protection in the form of a coarse-grained topping, and it can be laid as the top layer of a roofing cake. Representatives of the manufacturer in most cases offer Uniflex gray EKP slate, but red and green sprinkles are available. Uniflex EKP 4 5 is used for decorating roofs with large slopes or for inverted roofs.

View Uniflex TKP, just like the EKP, it has a weight of one square of 5 kilograms, and a thickness of 0.38 centimeters. Other technical characteristics are the same as those of the Chamber of Commerce and Industry.
Uniflex HKP, in addition to the composition of the outer protective layer, does not differ in any way from the HPP type.

To eliminate all complaints from buyers that are caused by a lack of understanding of how to properly lay this roofing material, the manufacturer offers detailed instructions for laying, both new roofing and for repair work. In addition, in many areas, dealer companies provide training to groups of roofers, where they are taught how to comply with all conditions of work with different types roofing materials.
You can watch the work with Uniflex on the video:

Roofing felt laying

Uniflex is a modern roofing material for roofing and waterproofing building structures manufactured by TechnoNIKOL. Being one of the varieties of euroroofing material, the material for roofing structures Uniflex is a universal bitumen-polymer material, widely used in the installation of roofs and to protect foundations and walls from moisture penetration. Based on the tests carried out, the material received a certificate of conformity to all regulatory documents and standards.

Uniflex is represented by a multilayer structure, the basis of which is fiberglass or fiberglass, or polyester film, on which an astringent bitumen-polymer layer is applied, consisting of SBS or APP modifier and mineral filler. A protective layer is applied over the bitumen-polymer layer, consisting of foil, coarse or fine-grained dressing and a film of polymer material.

Reliability and ability to operate in various climatic conditions. If Uniflex is modified with an SBS component, it becomes more flexible and can be used in regions with air temperatures down to -40°C. In the case of using the APP modifier, the Uniflex component becomes more durable and resistant to thermal effects (its softening occurs only when temperature regime over +150 degrees)

Long service life (20-25 years)

Improved performance. For example, the vapor permeability of the material is several times lower than that of traditional roofing material.

Uniflex TechnoNIKOL - one of the innovative developments - is made on modern equipment, has a certificate of compliance with standards and GOSTs, and is used in the construction of serious civil and industrial facilities.

There are two types of material, differing from each other in the type of dressing and scope:

Uniflex K. Differs in coarse-grained dressing from granulate or shale. There are varieties with foil coating with outer side, and a polymer film with inside canvases. Use this type of material as the top layer of the roofing "pie". It is represented by the following varieties: Uniflex EKP, Uniflex TKP, Uniflex HKP, Uniflex Vent EKV;

Uniflex P. It is characterized by double-sided coating of the canvas from a polymer film or fine-grained dressing. The main area of ​​application is the device of the lower layer of a multi-layer roof, as well as for waterproofing building structures(foundations, walls, etc.) Varieties of this type: Uniflex EPP, Uniflex CCI, Uniflex HPP, Uniflex Vent EPV.

Specifications Uniflex K and Uniflex P also have a number of differences. In particular, the mass of a square meter of type P euroroofing material is 3.85 kg, while the weight of type K euroroofing material exceeds it by 30% and amounts to 4.95 kg / sq.m. The thickness of the sheets also differs: type K is 1 mm thicker than type P.

EPP

EPP is a rolled roofing and vapor barrier material, the reinforcing basis of which is polyester, on which a bitumen-polymer coating is applied on the outside and inside, using artificial rubber as a modifier. Outside and from the side of welding, the material is covered with a melted polymer film. It has a certificate of conformity to all required GOSTs. It differs from other Uniflex brands in the following features:

One of the most durable varieties, with the maximum percentage of elongation at break (up to 60%);

High quality, due to the enrichment of bitumen with artificial rubber and a thicker binder layer on the welded side;

Excellent performance in any regions of Russia with a temperature minimum of up to -30 degrees;

Warranty period of operation - 20-25 years.

It is recommended to use Uniflex EPP for the manufacture of the lower layer of a two-layer welded flat roof, while the top layer is recommended to be made of Uniflex EKP or Technoelast EKP. It is also used in the construction of objects where waterproofing is supposed. underground structures.

Due to its structure, EPP has good vapor permeability. Vapor barrier Uniflex EPP is used in the installation of "breathing" roofs.

Average material price per Russian market is 100-115 rubles/sq.m. The cost of one roll of Uniflex EPP will cost 1000-1150 rubles.

EKP

In Uniflex EKP, as in the previous variety of euroroofing material, polyester acts as a reinforcing base, thanks to which the material is able to withstand high tensile forces. The base is impregnated on both sides with a bitumen-polymer mixture, due to which the elasticity of the material increases and it can be freely mounted even at sub-zero air temperatures. The outer coating of the ECP, produced by TechnoNIKOL, is represented by a coarse-grained dressing of roofing slate.

On the market, Uniflex ekp is most often offered to the consumer in gray slate, although there are still green and red sprinkles. Performance characteristics allow the use of EKP as the top layer when installing a single-layer or two-layer welded roof. The thickness of the EKP web is 4.5 mm, the area of ​​one roll of the EKP is 10 sq.m., and its weight is 49.5 kg.

The price of the material per 1 sq.m ranges from 115 to 130 rubles / sq.m., while the cost of one roll is 1150-1300 rubles.

TCH

The peculiarity of this variety of euroroofing material is that frame fiberglass is used as a reinforcing base, which is characterized by special strength and high tensile strength in various directions. Protective covering The material is formed by a dressing of coarse-grained roofing slate. Consumers more often opt for Uniflex tkp gray slate, although there are also varieties of material with red and green sprinkles on the market.

Technical TCH characteristics meet all the necessary standards, which is confirmed by the existing certificate of conformity. The weight of the TKP roll is 49.5 kg. Average price per sq.m. in the Russian market is 105-110 rubles, respectively, the cost of a roll is 1050-1100 rubles.

HPP

HPP technonicol is one of the inexpensive types of Uniflex, due to the use of fiberglass as a base - a durable, non-rotting synthetic base. Fused polymer film was used as a protective layer. The web thickness is 3mm. The technical characteristics of KhPP 3 make it possible to use the material in the arrangement of the lower layer during the installation of two-layer built-up roofs. The cost of the material is significantly lower than other varieties of Uniflex. The average price of the material is 80-85 rubles per sq.m.

CCI

Uniflex TPP as a reinforcing base has a frame fiberglass impregnated with a binder composition of bitumen and polymer. From the outer and welded sides, the material is covered with a protective polymer film. The material is used as a bottom layer during the installation of roofs, for waterproofing ground and underground structures. The operational and technical characteristics of the Chamber of Commerce and Industry are similar to those of Uniflex HPP.

The weight of a CCI roll is comparable to the weight of a HPP roll and is 38.5 kg. Price per sq.m. fluctuates in the range of 90-100 rubles. The cost of the material varies depending on the amount of euroroofing material purchased.

EPV

Uniflex Vent EPV is also called a "breathing roof", as the material effectively protects against moisture penetration, due to the presence of special channels in the roofing sheet, through which water vapor is removed. It is possible to use the material without dismantling the existing roof, which increases labor productivity and significantly saves time that must be spent on roofing.

Operational and technical characteristics are due to the peculiarity of the device of the Uniflex EPV canvas, the upper surface of which is treated with fine-grained sand dressing. From below, the surface of the web is formed by a ventilated layer consisting of strips of a bitumen-polymer mixture, between which fine sand is applied. The entire lower surface is covered with a polymer film.

EPV is used for the installation of the lower layer when installing a multi-layer roof, as well as for the reconstruction of roofs. The cost of the material is variable depending on the region, so the price per roll varies from 1760 to 1950 rubles.

HKP

Uniflex HKP refers to varieties of euroroofing material used for the manufacture of the top layer for the arrangement of multilayer welded roof structures. It is distinguished by the fact that the reinforcing base is fiberglass - a tear-resistant, non-rotten synthetic material.

Popular on the market is HKP gray slate, the technical characteristics of which are similar to analogues. Material price per sq.m. averages 95-108 rubles. The cost of a roll is 950-1080 rubles.

One of the main elements of any structure is the roof, which performs the functions of heat and waterproofing, protecting the structure from external atmospheric and climatic influences. The degree of performance of functions depends on the choice of roofing materials.

The most reliable roofing material at present is Uniflex euroroofing material produced by TechnoNIKOL. Uniflex is applied by fusing on a flat roof surface, regardless of its angle of inclination.

What it is?

Uniflex is a multifunctional building material widely used for installation roofing, insulation of building elements from the harmful effects of moisture. This building material is a variety that serves to perform roofing elements buildings.

The basis of Uniflex is a fiberglass fabric or polyester film, on top of which there is a coating of modified bitumen and polymer. The bitumen-polymer layer consists of bitumen modified with atactic polypropylene (APP) or styrene-butadiene-styrene (SBS) and a filler of mineral origin. Next is a layer of foil sheet, which performs the function of protection, and a layer of fine-grained or coarse-grained dressing and a polymer layer.

At the heart of the web is a biologically stable building material that prevents the entire web from rotting. On high-tech equipment, the base is treated with a binder. Layered on both sides of the canvas protective compound from slate dressing or polymer film. The topping can be made of coarse or fine roofing slate.

The canvas consists of five layers, each of which performs certain functions:

• The reinforced base gives the canvas elasticity, preventing destruction.
• Layers of a mixture of modified bitumen with a polymer protect the surface from the harmful effects of moisture.
• The role of the protective layer is to ensure ease of work when laying the canvas and ensure its reliable bonding to absolutely any surface.

Advantages

1. Ability to use the material in various conditions climate:

• If there is a modifier based on the styrene-butadiene-styrene (SBS) component in the euroroofing material, the fabric becomes elastic and it becomes possible to use it at a temperature environment up to -40оС.
• In the presence of a modifier based on the atactic polypropylene (APP) component, euroroofing material acquires strength properties, becoming resistant to elevated temperatures (only exposure to temperatures from +150 ° C contributes to its softening).

2. The service life of euroroofing material is 20-25 years.

3. Significantly reduced the rate of vapor permeability of the material.

Application

The material is equally well used on surfaces with different angle tilt, vertical or horizontal planes. With the help of Euroruberoid, repair work roofs, a reliable waterproofing layer is created during the construction of bridge structures.

Euroroofing material is laid in short time and does not require the use of specialized devices and devices. Laying consists in heating until the bottom layer is melted gas burner.

During storage and transportation, the rolls are placed in two rows in height, placing them vertically, and only if necessary, one row can be placed horizontally. Storage is carried out in special containers or on pallets in dry warehouses. It is directly affected by Sun rays, therefore, during storage, euroroofing material is protected from their impact.

Technical characteristics of Uniflex

The basis of the material is bitumen, endowed with unique properties when modified with plastic or rubber. After modification, the building material acquires:

• plastic;
• increased strength;
• fire resistance;
• durability.

Euroruberoid is divided into various grades, the technical characteristics of which determine its purpose:

• Uniflex EPP created on the basis of polyester, the top and bottom layers consist of a layered mixture of bitumen with a polymer, protected by a polymer film. The applied rupture force in the cross section is 350N, in the longitudinal section - 500N.
• Uniflex CCI also basically has a polymer film, but with much greater strength. The tensile strength in the cross section is 900N, and the longitudinal one is 800N.
• Uniflex HPP has the lowest tensile strength of only 294N.
• Uniflex Vent EPV used for arranging roofing that requires ventilation, due to the fact that this brand has best indicator air exchange, which prevents the formation of internal blisters.
• Uniflex TPV, EPV used for the manufacture of air-permeable roofing panels, the bottom layer of a multi-layer roofing sheet.
• Uniflex marking K laid out with the top layer in the roofing "carpet".

Uniflex types

There are 2 types of material with distinctive technical characteristics:

• . This type has a layer of polymeric material and a layer of fine-grained dressing on top and bottom. Uniflex P is used mainly for laying the bottom layer of roofing sheets and as a waterproofing element of buildings.
• . distinctive feature of this type is the presence of coarse-grained application of shale. It is mainly used as the final layer of a roofing surface containing several layers.

Uniflex TechnoNIKOL

The TechnoNIKOL company produces improved modifications of Uniflex roofing material. Technical indicators the latest building materials TechnoNIKOL companies make it possible to use it under various natural and climatic conditions.

Thanks to advanced technologies production company TechnoNIKOL produces euroroofing material with high-level operational characteristics that make it possible to perform roofing even in winter period. The presence of a variety of marking range allows each customer to choose an insulating material that suits him in terms of quality and cost.

CCI

The reinforcing basis of TPP is made of fiberglass impregnated with a binder composition of a mixture of bitumen and polymer. On both sides of the Uniflex Chamber of Commerce and Industry there is a polymer film. The building material of this brand is used to protect above-ground and underground structures from the harmful effects of moisture, as well as the bottom layer of the roofing sheet, consisting of several layers.

HPP

This brand building material represents one of the least expensive types of euroroofing material. The low cost of the material is due to the presence of fiberglass (durable, non-rotting fiberglass) as a base. The protection layer of this brand is a melted polymer film. Uniflex HPP will be used as the bottom row of a roofing cladding containing several layers

Vent EPV

The building material under this brand has high waterproofing rates, provided by the existence of special channels in the structure of the material that prevent greenhouse effect. Thanks to the possibility of using Uniflex Vent EPV on a roofing surface that has not been dismantled, the time required for the reconstruction of the roofing sheet is significantly saved.

The peculiarity of the structure of the Vent EPV leaf determines the operational and technical performance of the building material, its upper side consists of a finely dispersed sandy dressing. The lower layer of the cloth is endowed with air exchange properties and consists of strips of fine-grained sand, alternating with strips of a mixture of bitumen with a polymer. On top of the mixed layer is a film of polymer.

It is more expedient to use the EPV vent as the bottom row of a roofing sheet consisting of several layers, as well as for reconstruction work with old roofs.

EPP

This is an excellent vapor barrier building material, based on polyester. Polyester contains applied polymer-bitumen coating (bitumen is modified with artificial rubber) on the outside and inside. The upper and lower sides of the web are covered with a melted polymer film.

The distinguishing features of the brand are the following indicators:

• The maximum percentage of elongation at break, which is up to 60%, due to which it is one of the most durable modifications of euroroofing material;
• high quality, due to the modification of bitumen with the help of rubber of artificial origin and a thickened binder layer located on the side of the deposition;
• possibility of application at ambient temperature up to -30оС;
• Guaranteed service life is 20-25 years.

It is more expedient to lay EPP as the bottom layer in the manufacture of a built-up two-layer flat roofing surface, and the upper part is best made from Uniflex EKP or EKP. Technical indicators make it possible to use the canvas as a waterproofing building material in the construction of building structures that require reliable protection from harmful effects moisture.

The high degree of vapor barrier is due to the texture of the EPP web. The vapor barrier index must be taken into account when installing an air-exchanged roofing carpet.

TCH

A distinctive feature of this brand is that the reinforcing basis of the canvas is a frame fiberglass, endowed with special strength qualities and a high coefficient of tensile strength in all directions. The top coating consists of coarse slate for roofing. Often the choice of buyers is settled on a brand that has a gray slate top, while modifications of this type of Uniflex include brands with red and in green slate chips.

The Uniflex TKP brand product has a quality certificate confirming its compliance with technical indicators all necessary regulations and standards.

EKP

The basis of this modification of euroroofing material is polyester, which provides a high percentage of elongation at break. The upper and lower parts of the base are impregnated with a mixture of bitumen and polymer, due to which the elasticity of the web is greatly increased. The increased plasticity of the building material allows you to work at an ambient temperature below zero. The upper part of the material is a dressing of coarse slate chips.

While there are gray, red and green slate versions on the market, the consumer most often chooses a gray-layer canvas model.

It is expedient to use Uniflex EKP as the top layer when mounting a one- or two-layer roofing surface.

HKP

The reinforcing basis of this model of euroroofing material is fiberglass - a building material that ensures the strength of the Uniflex fabric to tear and prevents decay processes. This type of euroroofing material is used as the top layer in a multi-layer welded roofing "pie".

The use of euroroofing material provides reliable waterproofing of the roofing surface or other building structure on long years. The service life of the sheet is from 15 to 25 years, which allows the consumer to save money on the dismantling of the roofing surface. In addition, the waterproofing qualities reliably protect the surface protected with euroroofing material from the harmful effects of moisture.

Uniflex EPP - roll waterproofing material based on bitumen and polymer. It is applied to isolation of a roof and other constructive elements of buildings. This is a demanded rolled waterproofing in Moscow due to the combination of low price and excellent performance.

Waterproofing Uniflex: structure and scope

Uniflex is made by applying to polymer base bituminous composition (SBS-styrene-butadiene) on both sides. protective layer is a fine-grained dressing based on talc, foil, dolomite. Upper layer- water-repellent film. The manufacturer TechnoNIKOL produces Uniflex EPP using high quality raw materials. Roll waterproofing Uniflex has successfully passed tests in the accredited Tekhnonikol laboratory for compliance with GOST EN 1849-1-2011.

Buy waterproofing Uniflex EPP can all those who perform work to protect structures from moisture and condensate. The material is suitable for use in all climatic zones as lining isolation for roofs of all types, the bases, pools, interfloor overlappings.

Uniflex EPP - price and other advantages

Buy Uniflex - from 119 rubles. for 1 m2 in our TeploSnab online store. Low price Uniflex waterproofing is explained by direct deliveries from the manufacturer. Roofing material has the following advantages:

• high tensile strength;
• minimal water absorption (up to 1%);
• long service life;
• elasticity and flexibility;
• ease of installation;
• does not require maintenance;
• resistance to temperature changes.

EPP waterproofing is supplied in rolls. The material is easily cut with a polymer knife.

Specifications

Features of working with the material

Before buying Uniflex and installing waterproofing, it is recommended to study the TechnoNIKOL manufacturer's instructions. Roof waterproofing is laid in accordance with SP 131.13330. Before installation, the material is heated with a burner or a heat gun, rolled out with an overlap. For better adhesion the surface to be insulated is coated with bitumen.

Purchase and delivery

Uniflex - what is it? Waterproofing of this plan belongs to the category of business class materials, which are widely used when laying roofing. Suitable for protecting most modern designs.

Purpose

When repairing an old roof covering without completely dismantling it, it turns out to be quite difficult to dry the roof. As a rule, the old layers contain an abundance of moisture that has impregnated the insulation and the screed. The water contained inside evaporates extremely slowly even when exposed to direct sunlight.

If an insulating layer is laid on a wet surface, the released vapors will look for a way out and the roof will definitely swell. Uniflex allows to avoid such deplorable consequences. What it is? Let's take a closer look at the properties and features of the use of the material.

Types

Based on the purpose, the following types of material are distinguished:

• "P" uniflex, what is it? This basis is used when it is necessary to create a reliable waterproofing layer to protect building structures and structural elements. Both sides of the material contain a coating that prevents the effect of sticking when storing and transporting rolls.
• "K" uniflex - top part presented in the form of a polymer film with bottom side canvases, and slate coarse-grained dressing from the front. It is used to protect the underside of the roofing carpet and areas at the junctions.

Characteristics

Uniflex - what is it? The answer to this question will allow a comparison of the main physical and mechanical indicators of individual types of material:

Material Advantages

Among other insulating materials for roofing, uniflex stands out primarily for its ability to operate in various climatic zones. Modification with a special SBS component makes it more plastic, which becomes an indispensable quality when used in regions with ambient temperatures up to -40 ° C.

The use of an APP component as a modifier adds strength and resistance to thermal effects to the material. The softening of the layer in this case occurs only when exposed to temperatures above +150 ° C.

Currently the price for square meter on domestic market is about 90-100 rubles. However, it is most advantageous to purchase such waterproofing in rolls. Uniflex, the price of the material may vary depending on the volume of purchases.

Laying

Installation roll coating little different from the use of other similar foundations. To begin with, the material is tried on at the installation site. Next is cutting. The work is carried out carefully to minimize possible waste.

By heating with a gas burner, the material is melted. The insulating base is overlapped due to the presence of a special edge, which ensures an even distribution of layers. At the same time, the joints get rid of mineral chips. For ease of use, Uniflex material is available in standard rolls 10 m long and 1 m wide.

In order to acquire the required level of strength and the required reliability, it is recommended to use as a lining layer bituminous materials based on polyester.

Material manufacturers attached detailed instructions, which describes the features of laying waterproofing both in the arrangement of a repaired and a new roof. Thus, the complaints of consumers caused by ignorance of the peculiarities of handling this coating are excluded. In many regions there are dealer centers where you can get training in laying all types of production material.

Storage

Rolls of material are placed in vertical position. Keep the insulation away from combustible substances, direct sources of fire, heating devices. Short-term laying of material in several rows on top of each other is acceptable.

Eventually

Uniflex is highly effective insulating material, which is suitable for welding on inclined, horizontal and vertical surfaces, which are presented ( cement strainer, mineral and concrete plates). This base is suitable for repairing old ruberoid roofs, as its components are compatible with oxidized surfaces. The use of uniflex makes it possible to quickly, and most importantly, effectively protect the roof of a building from moisture.