Ursa insulation technical characteristics. Ursa insulation technical characteristics: quality and advantages of insulation in rolls. Solution to any problem

High-quality insulation Owning your home is one of the most important tasks of any home owner. Of course, with a prudent approach, the owner of the house will strive for high efficiency, keeping in mind affordable prices for insulation materials, environmental and fire safety the created structure. And only a high-quality product from well-known manufacturers can guarantee such a combination.

One of the most popular thermal insulation materials is mineral wool, made from environmentally friendly natural raw materials. If we think from the point of view of cost, then the most profitable is the use of mineral wool based on fiberglass. But, it’s true, you can hear a lot of “negative” things about glass wool - low stability, fragility, tendency to collapse and loss of volume, getting wet with moisture, etc. Perhaps all this is true if you purchase incomprehensible material from an unknown manufacturer. But everything is completely different when you choose high-quality Ursa insulation specifications which will be discussed in detail in this publication.

The corporate logo of the URSA trademark cannot be confused with any other - these are the silhouettes of a polar bear with a bear cub. This is exactly how the word “ursa” is literally translated from Latin. This trademark received official registration not so long ago - in 2002, but the history of the production of thermal insulation and building materials this company is much richer.

The origins should be sought at the beginning of the twentieth century - in 1907, the Spanish entrepreneur Jose Roviralta decided to organize the production of building materials based on fiber cement, innovative at that time. It is interesting that mineral rocks delivered from Russia - from the Ural Mountains - were initially used as raw materials. This circumstance gave the company its name - “URALITA”, which literally means “Ural stones”.

The business, as they say, took off, began to expand, and pretty soon URALITA products became recognizable and in great demand throughout Europe, and the company itself “stepped over the borders” and turned into a transnational concern.

At the end of the last century, the concern included the companies Pfleiderer and Poliglas, leaders in the production of thermal insulation materials. Then a logical decision was made to unite all research and production facilities operating in the insulation materials sector under a single brand - and thus the “polar bear” was born - “URSA”

Nowadays, products under the URSA brand are produced at 14 enterprises located in various European countries. Three powerful plants operate in Russia - in the city of Chudovo, Novgorod region, and the city of Serpukhov, Moscow region.

It is interesting that the plant in Chudovo is the oldest division in the entire structure of the URALITA concern - this enterprise, which previously specialized in the production of glass, dates back to 1876. Now it is a powerful, completely modernized enterprise that meets the most stringent international standards of quality and environmental safety.

Check out useful information, from our new article on our portal.

URSA product lines

The main volume of products of the URSA brand is mineral wool insulation based on glass fiber, produced using a special technology developed by the company’s specialists, which eliminates or minimizes the characteristic disadvantages of glass wool. However, the URSA assortment is not limited to this - completely innovative developments of fibrous thermal insulation materials URSA PUREONE and insulation based on extruded polystyrene foam URSA XPS are on sale. In addition, the production of special membrane coatings necessary for creating effective thermal insulation systems is envisaged.

Insulating materials of the “URSA GEO” line

This is the most common material in the company’s assortment. Its basis is fiberglass, made from purified quartz sand with mineral additives. A special eco-technology produced by "GEO", the subtleties of which are certainly trade secret, makes the products absolutely safe for humans and the environment - the canons are observed modern approach to "green building".

• Although in the production of mineral wool insulation it is not yet possible to do without organic binders, their emissions in URSA GEO are reduced to almost zero, that is, a clean and healthy atmosphere will be maintained in the premises.
• The most important advantage of URSA GEO insulation is its non-flammability and resistance to high temperatures. The material not only does not ignite, but also prevents the spread of flame.
• The material has a pronounced biostability - it does not lend itself to decay or decay, and does not serve as a breeding ground for any forms of life.
• Convenient forms of release of insulation from the URSA GEO line significantly simplify the installation of thermal insulation structures. Despite their apparent fragility, glass fibers have excellent strength and elasticity. In some cases, the installation of insulating boards or mats will not even require additional fixation.
• Thermal insulation “URSA GEO” stands out from the crowd increased durability– it does not fall off, does not lose its shape and performance characteristics, and is capable of faithful service for at least 50 years.

The URSA GEO product range includes about 20 items. It makes sense to consider those that are most often used in individual construction.

• "URSA GEO M-11"

This type of insulation can easily be considered one of the most popular - it is characterized by increased versatility, and is used in almost any area of ​​private construction to create thermal insulation or sound insulation structures:

- for insulation of interfloor or attic floors along beams or joists.

- for insulating frame walls or creating soundproof walls internal partitions.

- can be used as insulation in multi-layer brick or stone walls.

- excellent for insulating loggias and balconies.

- used for thermal insulation of pipelines or ventilation ducts.

Available in rolls of various lengths and widths - very convenient for self-assembly.

• "URSA GEO M-11mini"

Reduced release format - “URSA GEO M-11 mini”

In the practice of private housing construction, there are often areas where it is more convenient to use small-format material for insulation or sound insulation. The manufacturer has thought through this issue - “URSA GEO M-11 mini”, being in terms of operational parameters an analogue of the type presented above, is produced in the form of narrow mats rolled into rolls. This greatly simplifies the transportation of material by personal transport and carrying out independent installation work.

• "URSA GEO A private house»

The name of the type speaks for itself - this is a product of increased versatility, designed specifically for use in individual construction or for.

Excellent for insulating floors along beams or joists, for thermal insulation of frame walls, for the construction of internal lightweight partitions with the required level of sound insulation.

The packaging of the material is convenient - it is designed for 20 m², which facilitates calculations when planning construction or repair work.

• "URSA GEO Light"

If the owners are primarily interested in the cost-effectiveness of thermal or sound insulation work, then you can choose a “lightweight” version of the insulation - “URSA GEO Light”.

The most affordable type of insulation is “URSA GEO Light”

This material also has versatility - it can be used in horizontal unloaded insulating structures (floors and ceilings on beams and joists), as well as for acoustic ceilings and interior partitions.

A material with a specific purpose - created specifically for insulation of pitched roofing structures. At the same time it creates reliable thermal insulation of the roof and highly effective protection from the penetration of external noise, which is especially important for attic living spaces.

In the production of this type, a special technology is used - “URSA Spannfilz”, which can be translated as “elastic felt”. The slabs have pronounced elasticity and fit perfectly between the rafter legs, thereby ensuring good fixation and the absence of “cold bridges”.

The form of release is also interesting - slabs in a roll. This makes it possible to easily cut material in any direction, minimizing waste at non-standard distances between rafters.

• "URSA GEO Universal Plates"

In some cases, to carry out routine insulation works In a house or apartment, it is more convenient to use separate slabs rather than rolled mats. This is also included in the product line - you can purchase universal plates.

The main purpose of this material is to insulate wall structures and create soundproof partitions. However, it is not for nothing that they are called universal - the slabs are quite suitable for thermal insulation of floors, pitched roofs, along joists, balconies and loggias.

The convenient length and width of the slabs (600 × 1000 mm) will greatly facilitate their installation in conditions, for example, in cramped rooms or limited work space.

• "URSA GEO Noise Protection"

A special type of material intended primarily for use in the construction of internal frame partitions. It has pronounced noise-absorbing properties (sound absorption class B). Special size roll (width – 610 mm) is designed for installation between frame guides located with a standard pitch of 600 mm.

However, such mats can also be used for insulation and soundproofing of floors, and creating acoustic ceilings.

• "URSA GEO Frame"

The main purpose of this variety is thermal insulation of structures on a metal or wooden frame. The range of thicknesses - from 100 to 200 mm allows you to effectively insulate walls during the construction of such popular in our time

Especially for frame structures - “URSA GEO Frame”

Designed mainly for vertical wall structures. The material has a high degree of elasticity (thanks to the already mentioned URSA Spannfilz technology), which ensures the stability of the thermal insulation layer and the absence of “cold bridges”. It can also be used as an insulating middle layer for “well masonry”, for insulating roofs and ceilings along joists or beams. It can be used to create an insulated ventilated facade, but with the obligatory use of a windproof, vapor-permeable membrane.

• "URSA GEO Facade"

Fiberglass-based slabs designed exclusively for external wall insulation using “ventilated facade” technology. They have increased strength and dimensional stability. The outside is covered with black fiberglass of high density and strength, which makes the use of additional wind protection unnecessary.

If the facade insulation is planned to be two-layer, then such slabs are used for the outer layer.

• "URSA GEO M-11F"

A special type of insulation mats specifically designed for thermal insulation of rooms with high humidity (for example, baths or saunas).

"URSA GEO M-11F" - foil material specially designed for baths and saunas

The outside is coated with aluminum foil. This layer creates a reflective screen that redirects the heat flow towards the room, and at the same time becomes an effective barrier that prevents steam from penetrating into the thickness of the material. Thus, with internal insulation there is no need to use additional vapor barrier membranes, which significantly simplifies installation.

The scope of application is thermal insulation of walls and ceilings in baths and saunas, but it can also be used in other insulating structures inside the building.

The table below shows the main parameters of the mentioned insulation materials of the “URSA GEO” line. Thermal conductivity indicators are indicated for temperatures of +10 and +25 ° C, as well as for normal (mode A) and wet (mode B) conditions of everyday use.

Video: advantages of URSA insulation materials

Insulation materials of the “URSA TERRA” line

A special type of thermal insulation materials of the URSA brand are the insulation materials of the TERRA line.

The special technology for their production involves the inclusion of additional mineral components in the composition of the quartz melt. The main focus of such changes is to increase the strength and elasticity of the material and its expressed hydrophobicity. At the same time, it was possible to achieve higher thermal insulation characteristics.

The increased rigidity and elasticity of URSA TERRA insulation while maintaining their inherent elasticity simplifies the installation of thermal insulation structures on complex surfaces geometric shape or with pronounced irregularities.

Special processing of the material gives it special hydrophobic properties– drops of water roll down the surface without penetrating deep into the insulation.

In order to visually highlight the materials of the “URSA TERRA” line, they are given a special external color – a grayish-greenish color.

The product range is represented by three types of material:

• "URSA TERRA 34 PN"

The material is available in the form of slabs of a convenient width of 600 mm, which simplifies their installation.

The main scope of application is external insulation of facades along the frame with subsequent cladding of walls with siding. Can be used for frame walls, for ventilated facade systems with fastening of the finishing cladding on brackets. They are successfully used for multi-layer brick walls made according to the “well masonry” principle with an internal insulating layer.

It cannot be used for thermal insulation of floors and ceilings on beams or joists, for insulation of pitched roofs with the placement of slabs both between the rafters and as a continuous layer under them.

Belongs to the category of professional insulation materials.

This is the optimal solution for technical thermal insulation. Thanks to its elasticity and flexibility, the mat will accept any curved position, while ensuring complete adherence to the surface. This quality makes it possible to use such mats for insulating pipelines of any diameter, ventilation ducts, tanks, hydraulic and heat accumulators, various technological equipment.

The low mass of the insulation will not exert a significant weight load on the pipes or ventilation ducts. Adjacent mats fit perfectly together without requiring particularly precise adjustment.

• "URSA TERRA 34 PN Noise Protection"

Elastic and elastic slabs of this type are probably the most optimal solution in matters of providing sound insulation during the construction of internal partitions. Their clever width of 610 mm is specially designed for tight installation between the rails of a standard frame structure.

"URSA TERRA 34 PN Noise Protection" - the optimal material for internal partitions

Tests show that installing URSA TERRA 34 PN Noise Protection slabs into a conventional plasterboard partition on a wooden or metal frame can reduce the level of penetrating noise by two to three times.

This material is also used for flooring on joists or beams - at the same time, both reliable and effective thermal insulation is created.

Table of the main technical characteristics of insulation of the “URSA TERRA” line:

Insulation materials of the “URSA PUREONE” line

The appearance of insulation materials from the URSA PUREONE series, apparently, marks a literal revolution in the production of mineral fiber thermal insulation materials. Even an inexperienced eye can immediately see how different they are from their “brothers”. This is snow-white mineral wool with very special qualities.

A revolution in manufacturing technology mineral wool— "URSA PUREONE"

To produce such materials, natural components are used - quartz sand of the highest purity. But the main highlight of this technology is complete failure from binders based on formaldehyde resins and phenols, the use of recycled products is completely excluded.

Acrylic is used as a binding fiber into a single mass of the component, which, although organic compound, but is known for its absolute neutrality, safety for the health of people and animals, and harmlessness to the environment.

By the way, the unique pure snow-white color of “URSA PUREONE” materials is by no means the result of any coloring, since natural shade quartz melt is exactly like that – bright white. And the acrylic component only preserves this natural color.

The environmental safety of insulation with an acrylic binder has been comprehensively tested in accordance with the most stringent international standards. According to the unanimous conclusion of experts, URSA PUREONE thermal insulation meets the highest possible requirements for cleanliness and safety, and is therefore approved for use in children's educational and medical institutions. Naturally, it is perfect for the conditions of a residential building or apartment.

Acrylic processing quartz fibers gives them special elasticity. They become much less brittle, that is, the insulation does not “dust”, it is convenient to work with it, since even to the touch it resembles natural cotton fiber and is not capable of causing skin irritation.

The increased elasticity of the fibers is also a big plus for the soundproofing capabilities of the material. In such an elastic medium, sound waves quickly lose their energy, dissipate, and become unable to “swing” the partitions for further sound propagation.

The URSA PUREONE product range is represented by three types of material:

• "URSA PUREONE 34 PN"

This universal insulation made in the form of plates, convenient for installation on any building structures. It has excellent thermal insulation qualities and the highest noise absorption rates - it belongs to class “A”.

The areas of application of such material are practically unlimited, that is, from roofing from above to thermal insulation of cold floors along joists or beams below, including, of course, insulation façade walls outside or inside, creating acoustic ceilings and partitions.

The technical characteristics and scope of application of this type of insulation are similar to the previous one. The main difference is in the applied “elastic felt” technology, which was already mentioned above. Such slabs are more convenient to install between the guides of frame structures and between the rafters of the roofing system.

There is also a difference in the form of release - these are easy-to-transport and install “slabs in a roll”.

• "URSA PUREONE 37 RN"

Equally versatile and highly efficient material, but produced in the form of long mats.

This form of release is especially in demand for quick installation over large areas or for insulation and sound insulation of curved building structures.

Basic technical and operational parameters insulation of the “URSA PUREONE” line - in the table below:

Video: a qualitative breakthrough in the production of mineral wool - “URSA PUREONE”

Insulation products of the “URSA XPS” line based on extruded polystyrene foam

In the product range of thermal insulation materials of the brand " URSA Insulation materials designed for the most extreme conditions operation - with increased mechanical loads, high levels of humidity or even direct exposure to water.

We are talking about extruded insulation - this material is characterized by high heat transfer resistance and, at the same time, pronounced mechanical strength.

During the production process, carbon dioxide is used as a foaming agent - completely harmless to the environment. Adding to component composition special flame retardants dramatically increase the fire-fighting characteristics of the material, although, of course, it cannot be completely classified as non-flammable.

Extruded polystyrene foam has almost zero water absorption and is resistant to freezing and thawing cycles, so it is ideal for thermal insulation of the underground part of the foundation and walls basement premises. It is used to create insulated blind areas around the base of a building, as it can withstand direct contact with water or vegetation without any problems. The only thing he's really "afraid of" is... ultraviolet radiation. But with proper installation and protection from direct contact sun rays The durability of the material is estimated at 50 years or more.

“URSA XPS” slabs have verified dimensional parameters and are equipped with special lamellas for joining adjacent elements, which significantly simplifies and speeds up installation.

• "URSA XPS N-III"

These are universal hard polystyrene foam boards, which are widely used in all areas of construction.

Used for insulation of flat roofs of any degree of complexity. In the case of pitched roofs, it is possible to place a continuous layer of slabs on top of the rafter structure.

IN wall structures can be used as an insulating layer for “well masonry”. Excellent for creating a thermally insulated plaster facade.

They are widely used for insulating floors on any base, including with subsequent pouring of screed or as a basis for further installation of the system.

They are used for insulation of socles, shallow foundations, external and internal walls of basements.

Excellent for insulating balconies or loggias in city apartments.

The surface of the slabs is given a special textured unevenness and relief, which makes it easier to perform plastering work on them.

• "URSA XPS N-III-G4"

Slabs similar in technical characteristics to “URSA XPS N-III”, but available in a wider range of thicknesses. The price for them is somewhat less, since due to the reduction in the content of fire retardant additives, the flammability class is also reduced to G4. In this regard, the recommended application is basements, foundations, plastered facades, floors with subsequent pouring of screed.

• "URSA XPS N-V"

This type of slab belongs to the category of the most durable, capable of withstanding extremely high loads, which, in principle, determines the specific area of ​​application.

They are used for insulation of deep foundations, floors in premises where high loads are expected (for example, production workshops), flat roofs in use, automobile and railways, airfield runways. In private construction, the use of such insulation seems clearly excessive.

Table with the main parameters of insulation of the “URSA XPS” line:

Branded membranes of the “URSA SECO” line

Creating insulating structures on walls and roofs very often involves mandatory use special film coatings, with a different “mechanism” of action, depending on the location. In the assortment range "URSA" This point is also provided:

• « URSASECOA" is a vapor-permeable diffuse membrane, which is used to protect mineral wool insulation from the effects of wind and direct moisture, but does not prevent the free release of water vapor into the atmosphere.
• "URSA SECO AM"- a membrane similar in purpose, but thanks to its special three-layer structure, it has higher strength characteristics, vapor diffusion and water resistance. It can even be used as a temporary roofing sheet for up to 2 months.
• « URSASECO B"- a vapor barrier film that protects the insulation layer from direct moisture and saturation with water vapor. Placed on top of the insulating layer indoors.
• « URSASECOD"- hydro- and vapor barrier film of increased strength, the main application of which is the installation of reliable under-roof waterproofing. It has good resistance to ultraviolet radiation, and therefore can be used as a temporary roof for 2 months. The material is able to withstand very significant loads during installation of the roofing system and during its operation.

The main parameters of “URSA SECO” are shown in the table:

So, the main range of insulation and related materials of the URSA brand used in private construction was presented. Tables and descriptions will help you choose best option, and all that remains is to decide on the thickness of the insulating layer. The reader will also be provided with the necessary assistance in this matter.

How to determine the required insulation thickness?

There is a fairly simple calculation algorithm. Its essence is outlined in a special publication on our portal dedicated to the main ones. There is also a convenient calculator that will simplify independent calculations.

Modern equipment, the use of innovative technologies and the use of many years of experience - this is the secret of a company that has managed to release URSA insulation of such high quality that this brand has taken a leading position in the European market and significantly expanded its sales geography. Now in different countries There are fourteen factories producing this thermal insulation on the European continent, and the dealer network includes several hundred representative offices and retail outlets.

URSA insulation - what are they?

The URSA company produces thermal and sound insulation for any need, and the quality of the materials remains consistently high. Their consumers are both large construction organizations, as well as individuals purchasing insulating materials for insulation country houses and cottages. After all, the materials produced under the URSA brand are suitable both for insulating residential buildings and for increasing the energy efficiency of industrial facilities and engineering systems.

Today you can buy URSA insulation two types: mineral (made from fiberglass) and XPS (made from extruded polystyrene foam). Let's take a closer look at each. Mineral insulation is available under the PureOne and GEO brands.

URSA PureOne - this is a new generation of thermal insulation materials, a special development of the URSA company, made using a new unique technology. This is a snow-white material that feels and looks like wool. It is made of fiberglass that has undergone special processing. To bind the fibers, a fundamentally new binding component is used, which is made from acrylic. The technology used to produce PureOne has been used for a long time in Japan and America, but has not yet been introduced in Europe and Russia. It has stood the test of time, since for more than ten years mineral fiber insulation, which is analogous to URSA PureOne, has been protecting tens of thousands of homes from cold and noise. The introduction of this technology can be called a real technological breakthrough, which is comparable to the transition from slag wool to modern basalt mineral fiber. Ecologically pure natural material— quartz sand — allows you to produce glass fiber that is safe for human health. And the binder, made from acrylic - a substance that is widely used in medicine and cosmetology - is chemically neutral, does not contain phenol-forming compounds, and does not emit any harmful substances. Also high quality PureOne thermal insulation is due to the fact that no recycled materials are used in its production, but integral part the binder components are harmless substances plant origin. But the cost of URSA PureOne insulation is higher than that of materials produced under the GEO brand.

URSA GEO - it's environmentally friendly pure material based on fiberglass, which has been processed using modern technologies. It replaced GLASSWOOL thermal insulation. The new material is much safer for both humans and the environment. After all, GEO eco-technology has made it possible to replace synthetic insulation components with substances of plant origin. At the same time, the price of URSA insulation remained almost the same as before. URSA GEO is also made from quartz sand. This thermal insulation practically does not emit volatile compounds (their concentration is lower than European sanitary standards almost 15 times). Thanks to the new arrangement of fibers and their minimal thickness, this insulating material is highly elastic and is able to perfectly absorb sound vibrations.

URSA XPS is a thermal insulation material based on extruded polystyrene foam. It can be used not only for heat and sound insulation, but also as a waterproofing layer for structures buried in the ground. High density This material allows it to easily withstand seasonal soil movements, and the stepped edge eliminates the appearance of cold bridges.

How to buy URSA insulation

All URSA insulation materials are extremely durable, classified as fireproof and greatly improve the energy efficiency of buildings. With them you can save up to 50% of the money you spend on heating. From our company you can buy URSA insulation of any type and purpose with delivery - be it insulation for a house, thermal insulation for its individual structures (roof, facade, foundation, etc.), or insulation for a bathhouse.

Non-flammable mineral heat and sound insulation. Easy universal material, produced in the form of rolls with a thickness of 50 and 100 mm, recommended for use in horizontal unloaded building structures. Economical option for private housing construction.

Archive

URSA GEO is a fiberglass-based mineral insulation manufactured with strict environmental requirements - from production and raw material composition to finished products. URSA GEO is the evolution of thermal and sound insulation for green building.

When creating URSA GEO materials, GEO eco-technology is used, which is based on the use of natural ingredients and improved recipe. URSA GEO material is safe for human health and the environment, ensures clean air and a healthy microclimate in the home.

Thanks to the structure of the material and the characteristics of the fibers, URSA GEO products have a number of outstanding properties - high thermal insulation ability with low weight, effective sound insulation in structures and excellent sound absorption. Whether it is a pitched roof, external walls or partitions, URSA GEO mineral fiberglass insulation is suitable for any thermal and sound insulation challenge in modern construction.

Why URSA GEO?

More than just insulation. URSA GEO thermal insulation is a kind of shield that prevents heat from escaping from the house through the walls, roof or floor and helps save on heating the house. Thanks to the combination of long elastic fibers and a large amount air gaps URSA material GEO reliably retains heat and protects the house from freezing, increasing its durability.

When choosing a material for insulating a house, you need to focus on its main characteristic - thermal conductivity (indicated on the packaging by the “λ” symbol, lambda). How less valueλ, the better the material protects from the cold.

Reliable sound insulation. URSA GEO materials serve as a reliable soundproofing barrier and have the best sound absorption classes: A and B. This fact is confirmed by scientific tests and many years of practice. Insulation materials Based on fiberglass, they perfectly absorb sound, which is why today fiberglass is the most popular material in the world for soundproofing partitions.

Eco technology GEO. URSA GEO materials are produced using eco-technology and take into account more stringent requirements for environmental friendliness - from production and composition of raw materials to finished products. URSA GEO materials have virtually no emissions volatile compounds— it is 10-15 times lower than the standards existing in Europe and Russia. Thanks to GEO eco-technology, URSA GEO material is safe for human health and the environment, ensures clean air and a healthy microclimate in the home.

Non-flammability. The main raw material for URSA GEO thermal insulation is quartz sand, due to which the material is not only natural in origin, but also non-flammable, preventing the spread of fire.

Durability. Mineral fiber based on quartz sand is not subject to aging and does not change its mechanical and strength properties during operation. The service life of thermal insulation is at least 50 years.

Biostability. Mineral insulation is inorganic in nature, does not rot and does not contain nutrients for the life of insects, rodents and microorganisms.

Easy to install. URSA GEO materials take the shape of surfaces of any curvature. Due to their flexibility and elasticity, URSA GEO mats and slabs fit closely to the insulated surface and are joined together without leaving gaps. Due to their high elasticity, the materials do not require high-precision cutting and sizing; they are mounted into the frame by surprise and held in the structure without additional fixation. In addition, URSA GEO materials are easy to transport; they do not break or crumble during construction site operations.

These simple rules will help you carry out high-quality work on insulation and soundproofing of premises and will allow you to avoid many mistakes when working with URSA GEO materials.

Shipping

When transporting URSA GEO, protect the material from rain, snow and possible damage. When loading into a car or van, do not squeeze the material packages. Also, do not over-tighten the material with fastening ropes and other transport devices. This is due to the fact that the material in the package is already in a compressed state, and additional compression can lead to a deterioration in the recoverability of its thickness. Place packages with slabs horizontally in the car body. When carrying material in a roll or bundle, it is not recommended to grasp the material by the open edge of the package at the end. This may cause premature damage to the packaging.

Storage

When storing, protect URSA GEO material from exposure to precipitation. Store the material in packaged form in covered, dry rooms or under a canopy. When storing outdoors under cover, do not place packages on the ground, but place them on pallets. Place packages with slabs in a horizontal position, install rolls vertically (up to 3 tiers inclusive).

Unpacking

Remove material from packaging immediately before use on site. This will significantly reduce the risk of damage to the material. The packaging can be used to protect the material from contamination when laid out on a construction site or as bags for collecting construction waste.

GEO M-11

Thermal insulation URSA Geo The M-11 combines first-class performance with affordable price. Over the past 15 years, it has been the most popular thermal insulation material in Russia (according to URSA research).

Ursa Geo M-11 insulation is mineral material based on fiberglass. It has the following advantages.

• Effective heat and sound insulation of premises, full preservation characteristics over many years of operation.
• This - non-flammable material(fire safety class - NG).
• Produced using URSA Geo eco-technology. The technology guarantees the safety of the material for the environment and human health both during its production and during operation.
• It comes in the form of mats and is available in rolls. Packaging in rolls simplifies storage and transportation. Mats can be cut both longitudinally and transversely. This ensures economical consumption of material, including for roofs with non-standard rafter spacing.

Mineral thermal insulation URSA Geo M-11 is intended for insulation of horizontal building structures. Installation of thermal insulation is carried out after installing the vapor barrier.

Ursa Geo M-11 insulation has increased fiber elasticity. It is provided with URSA Spannfilz technology (“Elastic felt”). The material quickly restores its original shape after deformation. It maintains a stable position inside building structures throughout its entire service life. The increased elasticity of Geo M-11 increases the ease of installation of the material in hard-to-reach areas, at joints, and interfaces of individual parts of building structures.

Thermal insulation URSA Geo M -11 is used both in private construction and by professionals. The material is available in roll sizes. Installation of insulation does not require special skills or the use of specialized tools.

Technical characteristics of URSA M-11(G)

Dimensions:

Areas of application of URSA Geo M-11 insulation

The material is used for insulation and sound insulation of horizontal surfaces and structures. Euromet specialists recommend using Ursa Geo M-11 thermal insulation for:

• insulation of floors (interfloor, attic, floors above cold basements). Insulation is carried out along beams;
• isolation reinforced concrete floors;
• repair of flat or low-slope roof slopes;
• thermal insulation of floors along joists;
• use for roofing assembled element by element from frame sandwich panels;
• insulation of cabins, block containers, modular buildings;
• thermal insulation for loggias and balconies (if you plan to use mineral insulation).

Thermal insulation URSA GEO M-11 can be used for:

• arrangement of frame partitions or walls with sound-proofing properties, as well as the frame walls themselves made of metal or wood (the internal distance between the frame skins and the thickness of the thermal insulation must correspond to each other);
• insulation in the middle layer when arranging partitions made of blocks or stones;
• insulation of air ducts, pipelines, industrial equipment.

Effective thermal insulation of the insulation is due to the fact that the material consists of URSA GEO staple fiberglass, which has a number of unique properties - low weight with high thermal insulation, excellent sound absorption.

Where can I use URSA GEO insulation?

The insulation can be used both in a pitched roof and in external walls or partitions - staple fiberglass products are suitable for solving any construction problem in the field of sound and thermal insulation.

URSA GEO insulation is a flexible and durable material

High flexibility and elasticity with rational compressibility of URSA insulation allows the most intimate contact with the insulated surface, thereby ensuring the absence of gaps between the slabs and mats. When packaged, URSA insulation is compressed up to 6 times, thereby facilitating transportation and storage in a warehouse.

Easy installation of URSA insulation

URSA insulation is lightweight and flexible, making installation quick, simple and waste-free. Installation of insulation can be carried out by only one person.

Effective thermal insulation

URSA insulation provides not only protection from the cold in winter, but also from the hot summer, thereby ensuring the most comfortable conditions all year round. The material is safe for humans and the environment. The quality of the material is confirmed by certificates of compliance with Russian GOST standards and European standards CE-Mark.

A material specially designed for sound insulation in frame-sheathing partitions and cladding structures. For the most reliable and quick installation in structures with a rack pitch of 600 mm, the material has a width of 610 mm. High elasticity and low weight ensure the stability of the material without additional fastening during its entire service life. Excellent sound insulation characteristics provide the most effective noise protection.

URSA GEO (GLASSWOOL) FACADE

A material specifically designed for use in insulation systems with a ventilated air gap. Used as an outer layer for single-layer and double-layer insulation of multi-storey and high-rise buildings. The material is covered (laminated) with black high-density fiberglass, so it does not require the installation of additional wind protection. It has excellent thermal insulation and sound insulation characteristics, as well as high dimensional stability.

URSA GEO (GLASSWOOL) PITCHED ROOF

The material is specifically intended for use as inter-rafter thermal insulation in pitched roof structures. Provides effective thermal insulation, and also has excellent sound insulation properties. The thickness of the mat is 150 mm, allowing you to install thermal insulation between the rafters in one layer. The size of the mat - 1200x4200 mm - is universal and allows you to cut the mat both lengthwise and crosswise, which ensures the absence of thermal insulation waste in roof structures with non-standard rafter spacing. The special structure of the material, in accordance with URSA Spannfilz technology, gives the material increased elasticity and guarantees a stable position in the structure for the entire service life.

URSA GEO (GLASSWOOL) M-11

The most popular and lightest product recommended for use in horizontal building structures. Excellent warmth and soundproofing properties And low price make this product the most popular among both private clients and professionals.

URSA GEO (GLASSWOOL) M-11F

Special version of the URSA M-11 brand. Products are factory covered (laminated) with a layer of vapor barrier - aluminum foil. The use of this product eliminates additional costs for vapor barrier of structures. Indispensable for insulating baths and saunas.

URSA GEO (GLASSWOOL) M-15

The material is intended for use in the structures of pitched roofs, partitions, floors and ceilings with arbitrary spacing of load-bearing elements. Provides the tightest fit in interfaces with structural units due to high compressibility and elasticity. 100% of the purchased material is used.

URSA GEO (GLASSWOOL) M-15F

Soft, elastic fiberglass mats, covered on one side with aluminum foil, packaged in rolls, hydrophobized (with water-repellent treatment). The use of materials covered with foil makes it possible to avoid the use of special vapor barrier films in structures where they are needed. Used for insulation and soundproofing of rooms with high humidity, baths, saunas.

URSA GEO (GLASSWOOL) P-15

Lightweight and elastic material intended for use in the construction of partitions and frame walls with a pitch of load-bearing elements of 600 mm. The shape and geometric dimensions allow the installation of the slabs by one person.

URSA GEO (GLASSWOOL) P-20

The material is intended for heat and sound insulation of external walls with the installation of insulation on the outside and in the middle layer of the wall. The material is also recommended for use in the construction of hinged ventilated facades as an inner layer for two-layer insulation of multi-story and high-rise buildings. In low-rise construction it can be used with single-layer insulation and as an outer layer with two-layer insulation.

URSA GEO (GLASSWOOL) M-25