home · electrical safety · Hair dryer for ski boots. Ski boot dryer. How to properly dry shoes the traditional way

Hair dryer for ski boots. Ski boot dryer. How to properly dry shoes the traditional way

Experience shows that boots do not dry out either on their own or when placed on a radiator steam heating. It seems that they are dry - BUT! Moisture gradually accumulates in them, as a result, by removing the inner felt boot at some point, you can pour 50 grams of water out of the plastic soap dish of the boot!

If your inner boots are wet, your feet will freeze much faster. So you need to dry it!

There are only two dryers designs- with and without forced air supply. Generally speaking, call them "special dryers for mining ski boots“- it’s possible with a big stretch, these are the same dryers as for any other shoes, but for ski boarders the problem of drying is much more pressing.

With air supply, it dries quickly - half an hour to an hour and dry boots are ready, but it weighs more, is more bulky and more fragile, which is important during transportation. For the specific shape of this product for personal use People call this type of dryer “chicken”.

Without supply, it’s just a low-power heating element of 10-15 watts, protected by a layer of something, mostly plastic. Basically everyone uses these. Due to their low power, strong heating does not occur and there is no need to monitor them. They should be left on for several hours or overnight.

Hotels often have dryers for group use. And they are located in a specially designated ski room. All the same two types, only under a large number of boot. I must say - VERY convenient. And these are truly specialized devices for ski boarders.

If there is no dryer, be sure to remove the felt boots from the soap dish and place them closer to the heat source. There is an opinion that frequently removed felt boots deteriorate faster. This is an unfounded prejudice. But each time you need to carefully monitor the careful straightening of the liner, once jammed, it will be difficult to straighten in the future and will ruin your life and skating.

As an argument for safety and usefulness, taking out the inner boot - if there is a custom insole, there is simply no other option to put on the boots. The surface of the insole is rough to prevent the sock from sliding on it. So rough that the sock does not slide on it if the liner is in the boot. You must first put on a felt boot, and only then insert the foot in the felt boot into the boot. Often this generally applies to any well-fitted boots.

So you can dry the liner by taking it out and not carry around an extra 200-500 grams of dryer for ski boots.

The entire winter program of Progress-Ski

Regular (all season) Progress-Ski visiting school in Nechkino, alpine skiing and snowboarding.

Russian "small" resort on the banks of the Kama, coniferous forest on the slopes. The ski day is a full 12 hours - from 10 to 22. Well prepared slopes. Snowmaking. Fast chairlift.

Convenient transport accessibility for Moscow and middle zone. The most budget trip of the season. Recommended for those working on technical excellence, and for those who are new to it.

A wonderful place to relax - and mega-favorable prices. Wonderful, beautiful place. Good conditions to get started with skiing and snowboarding!

Dates: November, February, March, more on request. Groups alpine skiing and snowboarding. Children's groups.

Place | Slope map | How to get there |

Footwear and its derivatives are significant components of comfortable work, leisure and sports. To extend service life and ensure comfortable conditions labor, we recommend using shoe dryers. They will help to quickly dry any shoes without damaging or deforming the materials, and the bactericidal lamp will help remove fungus and odors.

In our catalog you will find four main models of shoe dryers that meet all norms and quality standards. Regardless of the location of use, shoe capacity and price, you will find a dryer suitable for your needs. By purchasing drying systems from the GEFEST-VP company, you receive high-quality, time-tested equipment that is completely safe for use.

Our company managers will be happy to help you choose optimal model, suited specifically to your needs. Drying racks are ideal for both home use, and for use in hotels and recreation centers, rentals, skating rinks, production bases or factories.

We produce dryers of different types...

They have an improved touch control panel, reinforced collapsible design and maximum capacity. Dryers of this model are ideal for use in ski rental shops, skating rinks, recreation centers, factories and factories. Capacity is designed from 25 to 110 pairs of shoes, price category from 65,300 rubles. up to 165,500 rub.

They also have a collapsible design, have a simplified touch control panel and are optimally suited for use in ski schools and small rental shops. The capacity of dryers of this model is from 20 to 48 pairs of shoes. Prices from 53,000 rub. up to 66,500 rub.

They are the perfect combination of ergonomic design and affordable prices. Dryers of this model are ideal for use in hotel rooms, ski rooms, stadiums and domestic premises. They have a capacity from 10 to 32 pairs of shoes. Prices for drying racks of this model start from RUB 27,100. up to 48,000 rub.

The infrared drying rack of the “Eco” model is not dismountable. Manufactured in a single-sided version, designed for 3 and 6 pairs. Infrared dryer has low power consumption – A++. A big advantage of dryers of this model is the ability to connect several units in series one after another.

Drying equipment GEFEST-VP has no analogues in Russia. You can order a suitable dryer now - we accept orders through the website at any time. To place an order, you can call our operators at toll free number: 8-800-707-26-55.

Dryer for ski boots Any skier needs it, regardless of where he lives - at a specialized recreation center or in the private sector. In any case, you have to choose a method for drying shoes. The accessory can be individual, designed for one pair of shoes, or stationary, where you can dry from 8 to 60 pairs of shoes at a time. Ideally, it should be as efficient and economical in energy consumption as possible.

Specialized units are heavy, designed to dry several pairs of shoes at once, and are characterized by large dimensions and weight. In principle, you can dry any shoes on them. A dryer with long tubes is ideal, through which dry warm air is supplied to the insole, which quickly removes hygroscopic moisture. internal materials rubber, tarpaulin, polyvinyl chloride boots. Just like the materials of ski boots, they require strict adherence to thermal conditions.

Public dryers consist of:

  • electric heating element hidden in the rack;
  • several rows of hollow tubes on which boots and shoes are put on;
  • an ultraviolet element that allows you to disinfect shoes, eliminating unpleasant odors;
  • regulator of heating intensity and air injection.

Some models common use You can find an operating time timer. This is a good option for drying boots at night.

With equipment dried at the equipped bases of ski resorts, athletes will not have any problems preparing for a new day of active recreation on the slope. For those who came to the mountainous regions as savages, the question of bringing boots into working condition remains open. On radiators central heating It is almost impossible to dry shoes efficiently in a short time.

Attention! Using gas stoves, ovens, wood stoves, there is always a risk of damage to the materials used to make the shoes.

An alternative to modular dryers is lightweight, mobile equipment consisting of a low-power heating element and a fan hidden in an attractive body. It is this plastic element that is at risk of damage during transportation. An important option when choosing a dryer is a deodorizer - an ozonizing or ultraviolet element responsible for eliminating unpleasant odors, destroying the bacteria that causes it.

Popular models

Portable dryers for one pair of shoes are made taking into account the shape of the sock, which is important when caring for leather and leatherette shoes, but also for rubber boots and ski boots, which do not risk deformation when over-dried. This modification makes it possible to place the dryer in the most difficult-to-reach places for warm air circulation, ensuring uniform heat distribution.

Despite the general similarity, there are differences between light dryers:

  • antibacterial with ozone and a sliding body, which makes it suitable for equally effective drying of shoes of small and large sizes;
  • RJ-52C, RJ-49C and DiCiER HXQ-2012A - models with heating up to 70°C (without additional options);
  • Timson 2422 with ultraviolet;
  • EOO 21/220 — a heating element hidden in a twisted aluminum housing.

The only type of shoe dryer that is not suitable for ski boots is self-assembled mats.

Stationary industrial dryers provide approximately the same level of heating, but with constant forced air circulation through the pipes and the interior of the boots:

  1. Octopus N-8, designed to accommodate 8 pairs of shoes at a time. Unit weight 4100 g, works with standard household electrical network— 220V, 2 modes, maximum heating 70°C.
  2. Octopus N-10 differs from the previous model in the number and shape of pipes - square section, stepwise arrangement of rows. Weight - 25 kg.
  3. Sprut N-20 is an improved model, supplemented with a disinfecting module, weighing 45 kg. It is possible to use the unit with a connection to a heating boiler, which reduces the dependence of the dryer on the availability of an electrical network.
  4. Sprut N-30-N is a dryer designed for connection to the system autonomous heating. Wall mounted location, weight 33 kg.
  5. Sprut N-54 - 108 ski boots, 54 pairs can easily be placed for turbo drying on a rack 170 cm high. Equipped with a UV module, weight - 55 kg, runs on household power. There is an analog version for heating with water coolant. Upon pre-order, it can be equipped with a programmable sensor for turning the system on and off.

For any living conditions at a resort or training base, you can choose the most suitable dryer based on the method of heating the air and supplying it inside the wet shoes.

What does an electric shoe dryer do?

There are many ways to dry shoes, but for drying ski boots, electric dryers are the most optimal choice. Their advantage is the stability of heating, which ensures high quality drying without the risk of melting fasteners and synthetic inserts. There is no direct contact between wet surfaces and live parts - they are hidden behind plastic cases. This reduces the risk short circuit, and the shoes become dry and warm in a strictly programmed period of time.

When using electric mobile dryers, just like when placing them on stationary ones, it is not necessary to remove the insulating insert. This is a guarantee that no additional creases will appear on them, which means that riding on any day will be comfortable, not marred by the inconvenience of chafed feet.

How to properly dry shoes the traditional way

Despite all the devices offered by the industry, they may not always be at hand at the most needed moment. This is where the question arises: how to dry ski boots using improvised means. I'll have to use it old-fashioned method, for this you should:

  1. Take out the insulating sock.
  2. Get the insole.
  3. Place on the central or autonomous heating radiator.
  4. Pour water out of a plastic shoe if it has accumulated under the insole.
  5. Moving the tongue as far as possible, the boot should be placed with the sole up on a warm radiator.

If water radiators are not available, an oil radiator can be used as a heat source. IN as a last resort air circulation will be ensured by a fan heater installed for a continuous cycle of operation in a fixed position at the level of the top of the lying boot. How much dry air will enter the boot depends on the humidity in the room.

Attention! If the boot is heated enough, steam will come out of the boot for a while. Its absence does not indicate complete displacement of moisture from all materials. It’s just that wet materials, regardless of the thickness of the layers, warmed up to the same temperature, and evaporation became less intense.

When operating oil radiators or open fire sources, the air quickly becomes dry, but the amount of oxygen there becomes less. Drying your ski boots properly in the room without experiencing any discomfort is a great success. To dry shoes you need to set aside a separate small room.

Making a dryer with your own hands

The cheapest, lightest fan heater is comparable in cost to a pair of specialized shoe dryers, which you have to constantly monitor during operation, and the drying speed leaves much to be desired.

Taking the fan heater as a source and blower of warm air, all that remains is to supplement it with two polypropylene tubes 40-50 cm long. constant use the heater as a drying device will have to sacrifice the integrity of the grille behind which the fan is hidden. Two holes are cut in it, equal to the outer diameter of the pipes +0.5 mm, equally distant from the center. By inserting the tubes into these holes (without burying them inside), the second ends are brought inside the boots.

At the end of the season, before sending the equipment to the mezzanine, the boots must be properly prepared:

  • remove and wash the boot insert;
  • wash the outside and inside and dry the plastic base of the boot;
  • Having collected both components together, you need to stuff your shoes with crumpled newspapers.

Having completed three mandatory stages, you can be sure that mold fungi will not ruin expensive shoes, and thanks to the tight insert, deformation is also not a threat.

Mezzanines in a room or hallway are the optimal place for storage; they do not penetrate there Sun rays, which can damage the outer paint layer. Temperature changes high humidity they also have nowhere to come from.

Experience shows that boots do not dry out either on their own or when placed on a steam heating radiator. It seems that they are dry - BUT! Moisture gradually accumulates in them, as a result, by removing the inner felt boot at some point, you can pour 50 grams of water out of the plastic soap dish of the boot!

If your inner boots are wet, your feet will freeze much faster. So you need to dry it!

There are only two designs of dryers - with and without forced air supply. Generally speaking, call them "special dryers for ski boots"- it’s possible with a big stretch, these are the same dryers as for any other shoes, but for ski boarders the problem of drying is much more pressing.

With air supply, it dries quickly - half an hour to an hour and dry boots are ready, but it weighs more, is more bulky and more fragile, which is important during transportation. Due to the specific shape of this product for individual use, people called such a dryer “chicken”.

Drying rack for sports shoes (electric dryer for skates, ski boots, etc.) is equipped with profiles for air supply and the required length of air outlet for convenient storage and drying ski boots, boots and skates. Also, taking into account the specifics of sports shoes (height of the shaft and type of material), it is possible to make an air vent different lengths and from a metal of suitable composition.

Without supply, it’s just a low-power heating element of 10-15 watts, protected by a layer of something, mostly plastic. Basically everyone uses these. Due to their low power, strong heating does not occur and there is no need to monitor them. They should be left on for several hours or overnight.

Hotels often have dryers for group use. And they are located in a specially designated ski room. All the same two types, only for a large number of boots. I must say - VERY convenient. And these are truly specialized devices for ski boarders.

If there is no dryer, be sure to remove the felt boots from the soap dish and place them closer to the heat source. There is an opinion that frequently removed felt boots deteriorate faster. This is an unfounded prejudice. But each time you need to carefully monitor the careful straightening of the liner, once jammed, it will be difficult to straighten in the future and will ruin your life and skating.

As an argument for safety and usefulness, taking out the inner boot - if there is a custom insole, there is simply no other option to put on the boots. The surface of the insole is rough to prevent the sock from sliding on it. So rough that the sock does not slide on it if the liner is in the boot. You must first put on a felt boot, and only then insert the foot in the felt boot into the boot. Often this generally applies to any well-fitted boots.

So you can dry the liner by taking it out and not carry around an extra 200-500 grams of dryer for ski boots.

In our company you can buy dryers for ski boots and drying cabinets. To place an order, click the button below.

With high tops of ski boots, it is problematic to dry them well near the radiator. The question of how to dry properly interests many skiers. A dryer will help with this.

Its intended purpose is compact storage and drying. Depending on the type, it is simultaneously used for proper drying one or more pairs of shoes. Wherein, temperature regime and time interval are set at your discretion.

Ski boot dryer - works on the principle forced circulation using heated air. It is supplied through pipes located at the base of the air duct.

With the help of a pump, the liquid is heated in the electric boiler and its circulation begins. As a result, the heat exchanger heats up, the air is supplied to it using a low-noise centrifugal fan. The control device is two-level. It controls and maintains the optimal temperature for drying.

Advantages:

  • will not harm sports shoes - they are dried only from the inside of the model, so damage to the outer layer of leather or other material is excluded;
  • safety - humidity promotes the development of fungus, which is not a threat when using the device; the result of its operation is constantly dry shoes;
  • Duration of the process - drying is possible in an hour.

Can be used various methods drying, but the effect of complete drying cannot be achieved from any of them.

Types of drying devices

There are 2 types of dryers for skiers. This is portable - small installation, which effectively dries sportswear, even in the rainiest weather. And the stationary one is capable of drying at the same time: - a pair of boots, a hat, gloves and overalls.

They differ only in shape, the operating principle is similar.

Making a device with your own hands

Make drying device you can do it yourself with your own hands. If it is not possible to use a dryer, you can dry your ski boots with a regular wind blower. This is a regular heater that is equipped with a fan. Shoes must be placed in such a way that jets of hot air fall on them.

A better result can be achieved if you put crumpled newspaper in the boot. It absorbs moisture well. This device requires replacing newspapers after an hour. If you combine these 2 methods, the result of the process will be noticeable within 2-3 hours.

Another device, the basis for its manufacture are case fans. To make it you will need:

Connect the adapter wires to the fans using crimp connectors. After connecting, check the operation of the fans. The structure is ready. Drying is carried out by introducing fans into the boot. In this case, it is necessary to create conditions for good air circulation.

To keep an athlete's feet dry and safe, there are rules for drying shoes.

Drying rules:

  1. Before the process and after each ride, remove the liners.
  2. Dry only with the soles facing up.
  3. Apply drying when high temperature, only in exceptional cases.
  4. It is strictly forbidden to dry sports equipment on a radiator.
  5. Store with fastened clips on weak divisions.

By following these simple rules, your ski boots will last for many years.

The dryer is the solution to one of the current problems for the care of sports shoes. Using it, the skier receives: a reliable, durable, safe and effective assistant.