home · Measurements · Armed gynecological chair. Gynecological chair Armed SZ-II (blue color). Buy a gynecological chair

Armed gynecological chair. Gynecological chair Armed SZ-II (blue color). Buy a gynecological chair

Purpose

  • The gynecological chair model SZ-II meets the most demanding requirements of gynecologists and ensures comfortable performance of gynecological examinations and various diagnostic and surgical procedures. If necessary, the chair can be used as a delivery table or a treatment couch.
  • The chair is equipped modern system adjustment operating from a foot switch and from a remote control.
  • The chair is stable and comfortable to use.
  • This makes the examination procedure comfortable and convenient for both the patient and the doctor.
  • Armchair gynecological SZ-II manufactured in accordance with international standards and is not inferior in quality and reliability to gynecological chairs from the world's leading manufacturers.
  • 1 YEAR WARRANTY

Description

  • Seat adjustment: independent adjustment of height, tilt of the back and pelvic sections, as well as the Trendelenburg/Anti-Trendelenburg position are electrically adjustable.
  • The equipment is controlled using a foot switch and a remote control.
  • The upholstery is made using seamless technology from durable material, resistant to disinfection.
  • The armrests can be raised, lowered or rotated to the desired angle.
  • Soft seamless supports according to Heppel with metal base adjustable in height and rotation angle.
  • Equipped with wheels and locking rings, which allows you to move and securely fix the chair when stationary.
  • Equipped with a removable container for secretions and a device for unwinding paper.
  • Equipped with a colposcope holder.

Specifications

  • Back section: 830x550 mm
  • Seat: 400x550 mm
  • Height adjustment (not counting mattress thickness): 600 - 900 mm
  • Back section lift angle: 70°
  • Trendelenburg/Anti-Trendelenburg (tilt angle): 8°- 15°
  • POWER SUPPLY: Alternating current 220V/50Hz

Equipment

  • Gynecological chair - 1 pc.
  • Armrests - 2 pcs.
  • Knee pads - 2 pcs.
  • Drain container - 1 pc.
  • Remote control - 1 pc.
  • Foot switch - 1 pc.
  • Colposcope holder - 1 pc.

Attention! The standard color of the gynecological chair upholstery is blue

NOTE: The technical specifications indicated on the website are for informational purposes only. Detailed information about the design, technical specifications, appearance and configuration of the goods, please check with the managers.

The manufacturer reserves the right to make changes to the design, appearance, technical specifications, packaging of goods without prior notice to the seller and buyer!

The gynecological chair model SZ-II meets the most

meets the demanding requirements of gynecologists and provides comfortable

performing a gynecological examination, various diagnostic and

surgical procedures. If necessary, the chair can be

used as a birthing table or treatment couch.

The chair is equipped with a modern adjustment system, operating from a foot switch and from a remote control.

The chair is stable and comfortable to use.

This makes the examination procedure comfortable and convenient for both the patient and the doctor.

The gynecological chair SZ-II is manufactured in accordance with international standards and is not inferior in quality and reliability to gynecological chairs from the world's leading manufacturers.

  • Seat adjustment: independent adjustment of height, tilt of the back and pelvic sections, as well as the Trendelenburg/Anti-Trendelenburg position are electrically adjustable.
  • The equipment is controlled using a foot switch and a remote control.
  • The upholstery is made using seamless technology from durable material that is resistant to disinfection.
  • The armrests can be raised, lowered or rotated to the desired angle.
  • Soft, seamless Göppel supports with a metal base are adjustable in height and rotation angle.
  • Equipped with wheels and locking rings, which allows you to move and securely fix the chair when stationary.
  • Equipped with a removable container for secretions and a device for unwinding paper.
  • Equipped with a colposcope holder.

Equipment

Gynecological chair - 1 pc.
Armrests - 2 pcs.
Knee pads - 2 pcs.
Drain container - 1 pc.
Remote control - 1 pc.
Foot switch - 1 pc.
Colposcope holder - 1 pc.

Item medical furniture, intended for placing women on it during gynecological examinations, providence various procedures V medical institutions, as well as for diagnostic and minor surgical interventions.

Gynecological chair types and design type:
mechanical gynecological chairs (with a lifting mechanism);
gynecological chair with electric drive.

Buy a gynecological chair:

Gynecological chair KG-1
(manual)

Gynecological chair KG-1 main characteristics:


adjustment of the backrest and seat angles is manual.

The frame of the chair is made of steel pipe round section with the application of an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine.
The removable accessories of the chair are made of round steel pipe with galvanic protective and decorative coating.
Soft elements The back and pelvic sections are made of polyurethane foam, 10 mm thick and covered with vinyl leatherette.
The knee pads are made of steel profile, covered with a hygienic cover made of vinyl artificial leather with a polyurethane foam gasket. The knee pads and hand rests are installed in guide bushings on the seat frame, adjusted in height and then fixed using clamps.
The basin for collecting liquid is made of stainless steel.


The base is mounted on 2 rollers and 2 supports.

Advantages:

  • High strength of the chair frame due to the use round pipe with a diameter of 32 mm and a wall thickness of 3.2 mm.
  • Reliable mechanical adjustment of the dorsal and pelvic sections eliminates the risk of their spontaneous capsizing.
  • Wide choose additional equipment.
  • The manufacturer has modernized the mechanism for adjusting the seat angle; now instead of a cast aluminum nut with a ratcheting mechanism, we use a solid machined one made of steel. Due to this, the mechanism has become even stronger and more reliable.

Specifications:

Length: 1120 mm;
Seat width: 500 mm;
Seat height: 900 mm;
Height (total): 1640 mm;
Product weight: 45 kg;
Gross weight (without sheathing): 48.5 kg;

The tilt angles are adjusted using a manual drive:
- seats from horizontal: from 0° to 20°;
- backrests from the vertical: from 20° to 100°;
Color: beige, blue, green.

Standard equipment:
knee pads: 2 pcs.
step
stainless steel basin
palm rests: 2 pcs.

Package:
Dimensions of corrugated cardboard packaging: 850x515x1650 mm, volume: 0.72 cubic meters;
Dimensions wooden sheathing: 950x615x1750 mm, volume: 1.02 cubic meters.

Manufacturer: DZMO, Russia

Price: RUB 19,720.00

Gynecological chair KGU-05.01-Gorskoe

- Gorskoe is intended for gynecological, urological and proctological examinations and procedures in antenatal clinics, examination and urological rooms, as well as in maternity hospitals
The angles of the backrest and seat are adjusted by two air springs
The frame is made of steel profile with polymer powder coating
Soft sections covered with vinyl leather
The base of the chair has 4 adjustable supports to smooth out uneven floors
Retractable step
Collapsible design

Standard equipment:

  • Add-on step: 1 pc.
  • Retractable vessel: 1 piece
  • Popliteal supports: 2 pcs.
  • Palm rests: 2 pcs.

Options

  • Length: 1300 mm
  • Width: 660 mm
  • Height: 1350 mm
  • Steel profile frame
  • Backrest and seat tilt: air springs
  • Upholstery color: beige
  • With retractable step
  • Adjustable feet
  • Collapsible design

Manufacturer: " Gorskoe", Russia

Price: RUB 21,200.00


"Rastomat" mechanism

Gynecological chair KG-2 main characteristics:

seat height - fixed;
adjustment of the angles of the back and seat - the "Rastomat" mechanism.

The chair frame is welded, made of steel pipes square section with the application of an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine.


The knee pads are installed in guide bushings on the seat frame, adjusted in height and then fixed using clamps.
The basin (for collecting liquid) is made of stainless steel.

The basin is installed in a cassette located under the base of the pelvic section of the chair. When changing the angle of the seat, the basin always remains in a horizontal position and does not interfere with the patient’s seating in the chair.
The footrest is rotatable and fixed to the base frame.
The chair is equipped with a foot section.
The base is mounted on 4 adjustable supports.

Advantages:

  1. A universal gynecological chair, also used as a couch for examinations and various procedures.
  2. The strength of the frame is achieved through the use of pipes large section(40x40x2 mm and 40x20x1.5 mm).
  3. The footrest is securely fastened to the base frame and, if necessary, conveniently reclines, ensuring a rigid fixation of the stand on the floor.
  4. The chair can even be installed on uneven surface due to the adjustment of 4 supports.

Specifications:

Length (from footrest to backrest when unfolded): 1641 mm;
Seat width: 590 mm;
Seat height: 915 mm;
Product weight: 50 kg;
Gross weight (without lathing): 86.5 kg;

The tilt angles are adjusted using the Rastomat mechanism:
seats from horizontal: 14°;
backrest from vertical: 45°.
Color: beige, blue, green.

Standard equipment:
knee pads: 2 pcs.;
footrest;
foot section;
stainless steel basin;
palm rests: 2 pcs.

Warranty period: 12 months

Package:
Dimensions of corrugated cardboard packaging, mm 990x685x925, volume, cubic m - 0.63
Dimensions of wooden sheathing, mm 1060x800x1055, volume, cubic m - 0.90

Manufacturer: DZMO, Russia

Price: RUB 23,727.00 (color: beige)

Gynecological chair KG-04-“Diakoms” intended for gynecological and urological procedures. If necessary, the chair can be used as a treatment table.

When transporting, the chair can be folded and placed in a cover. The chair consists of an upper frame on which two sections are installed: the seat and the back.
Both sections have a soft top.
The seat angle is adjusted by two height mats.
The back of the chair has three fixed tilt positions.
The upper frame is mounted on two leg frames.
The front foot frame has a folding step.
The chair set includes two leg holders with soft pads on the metal base and a gynecological basin on a movable base.

Chair frames are made of steel profile pipe 25x25x1.5 mm, and have polymer coating white.
The soft elements of the chair are made of 12 mm plywood with polyurethane foam (40 mm thick) and covered with vinyl leather.

Dimensions:
length - 1310 mm,
width - 750 mm,
height - 150 mm.
Height in table position: 900 mm
Dimensions when folded:
length - 800 mm;
width - 750 mm;
thickness - 200 mm.

Weight of the gynecological chair: no more than 30 kg;

Angle of inclination of the back section from the horizontal: 0°, 20°, 45°, 70°
Seat angle: 0° to 30°

Manufacturer: Diakoms, Russia

Price: RUB 20,300.00


(air springs)

Gynecological chair KG-3M main characteristics:

The frame of the chair is made of rectangular steel pipe coated with an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine.
The soft elements of the back and pelvic sections are made of polyurethane foam (thickness 50 mm) and covered with vinyl leather.

The knee pads are made of steel profile, covered with a hygienic cover made of vinyl artificial leather with a polyurethane foam gasket. The knee pads are equipped with straps that secure the lower leg.
The knee pads and hand rests are installed in guide bushings on the seat frame, adjusted in height and then fixed using clamps.

The basin (for collecting liquid) is made of stainless steel. The basin is installed in a cassette located under the base of the pelvic section of the chair. When changing the angle of the seat, the basin always remains in a horizontal position and does not interfere with the patient’s sitting in the chair.

The footrest is rotatable and fixed to the base frame.
The base is mounted on 2 rollers and 2 supports.

Advantages

  1. High strength of the chair frame due to the use rectangular pipe the maximum cross-section in the class is 60x30 mm.
  2. The footrest is securely fastened to the base frame and, if necessary, conveniently reclines, ensuring a rigid fixation of the stand on the floor.
  3. The chair is easily transported due to two casters and is firmly installed even on uneven surfaces (the support is adjustable).

Specifications:

Length (with horizontal position of the back and seat): 1280 mm;
Seat width: 500 mm;
Seat height: 900 mm;
Height (total): 1650 mm;
Product weight: 49 kg;
Gross weight (without lathing): 54 kg;
Permissible load (no more): 180 kg;
Seat height above the floor: fixed, 900 mm;
Adjustment of tilt angles is carried out using pneumatic springs:
seats from horizontal: from 0° to 20°;
backrest from vertical: from 20° to 100°.
Color: beige, blue, green.

Standard equipment:
knee pads: 2 pcs.;
step;
stainless steel basin;
palm rests: 2 pcs.

Warranty period: 24 months

Package: The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate.
Dimensions of corrugated cardboard packaging, mm 910x550x1650, volume, cubic m - 0.83

Manufacturer: DZMO, Russia

Price: RUB 32,200.00 (color: beige)


with foot control

Gynecological chair KG-6-1 main characteristics:
seat height - fixed;
adjustment of the backrest and seat angles - electric drive.



The side guide rails for placing devices, as well as removable devices, are made of steel with a galvanic protective and decorative coating.


Control panel - foot.

Advantages:

  1. The optional leg section expands the capabilities of the chair to the level of the operating table.

Specifications:


Seat width: 590 mm;
Seat height: 930 mm;
Height (total): 1750 mm;
Product weight: 75 kg;
Gross weight (without lathing): 104 kg;
Permissible load (no more): 170 kg;
The tilt angles are adjusted using 2 imported electromechanical drives:
seats: from 0° to +15°;
backrests: from -15° to +70°.
Color:beige, blue, green.

Standard equipment:

knee pads: 2 pcs.;
footrest
foot control
stainless steel basin
palm rests: 2 pcs.;

Warranty period 24 months

Package:The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate.
Dimensions of corrugated cardboard packaging, mm 1020x660x1800, volume, cubic meters - 1.21;
Dimensions of wooden sheathing, mm 1200x850x1990, volume, cubic m - 2.03.

Manufacturer: DZMO, Russia

Price: RUB 191,638.00 (color: blue)


(air springs)

Gynecological chair KG-6-2 main characteristics:

seat height - fixed;
adjustment of the backrest and seat angles - pneumatic springs.

The chair frame is metal with an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine.

The pillows of the back and pelvic sections are removable and are attached to the frame using guide rods located on the lower plane of the pillow. The soft elements are made of cast polyurethane foam (thickness 50 mm) and covered with vinyl leatherette.

The palm rests are made of round steel pipes coated with a polymer powder coating. The palm rests are attached to the side guide rails using clamps and are adjustable in direction.

The basin (for collecting liquid) is made of stainless steel. The basin cassette is suspended on rods inside the seat frame, and the design of the cassette allows it to be automatically installed horizontally at any angle of the seat.
The footrest is installed independently of the chair.

The chair is equipped with a holder for paper towels, located inside the body of the back section.

The base is installed on 2 non-adjustable supports, 2 height-adjustable supports and 2 imported wheels with a diameter of 75 mm.

Advantages:

  1. The heavy chair is easily transported due to two wheel supports and is firmly installed on any surface on 2 fixed legs and 2 height-adjustable legs.
  2. The cushions of the back and pelvic sections are easily removed for sanitary treatment.
  3. The optional leg section expands the capabilities of the chair to the level of the operating table.

Specifications:

Length (with horizontal position of the back and seat): 1340 mm;
Seat width: 590 mm;
Seat height: 930 mm;
Height (total): 1750 mm;
Product weight: 74 kg;
Gross weight (without lathing): 106 kg;
Permissible load (no more): 170 kg;

seats: from 0° to +15°;
backrests: from -15° to +70°.
Color: beige, blue, green.

Standard equipment:

paper towel holder
knee pads 2 pcs.;
footrest
stainless steel basin
palm rests 2 pcs.;

Warranty period 24 months

Package: The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate.

Dimensions of corrugated cardboard packaging, mm 1020x660x1800, volume, cubic meters - 1.21
Dimensions of wooden sheathing, mm 1200x850x1990, volume, cubic m - 2.03

Manufacturer: DZMO, Russia

Price: 74,922.00 rub. (color: blue)

Gynecological chair with electric drive KGE-01-Diakoms.

Gynecological chair with electric drive KGE-01-"Diakoms" intended for gynecological and urological procedures.

Gynecological chair KGE-01- “Diakoms” consists of a chair and attachments. The chair consists of a panel and a mechanism for turning and lifting it, and a base. The panel consists of a frame on which two sections are installed: the seat and the back, which are hinged. Both sections have a soft top. The angle of inclination of the back section and rotation of the panel is carried out by gas springs when the control handles are pressed. The operation of the panel raising and lowering mechanism is carried out by an electric drive from the German company “DEWERT” using a remote control. The chair is mounted on four casters with a diameter of 125 mm with brakes. The chair set includes two leg holders with soft pads on a metal base, two hand rests and a gynecological basin on a movable base. The chair is made of profile steel pipe 60x30x2.0 mm, 40x25x1.5 mm and round steel pipe with a diameter of 25x1.5 mm, and has a white polymer coating.

The soft elements of the chair are made of 12 mm plywood with polyurethane foam (40 mm thick) and covered with vinyl leatherette.
Dimensions:
length - 1300 mm;
width - 600 mm,
height - 1400-1700 mm.
Height in table position: 600 - 900 mm
Weight of the gynecological chair: no more than 65 kg;
Permissible load on the chair: 120 kg
Angle of inclination of the back section from the horizontal: from 0° to 80°
Panel tilt angle: from 0° to 45°

Manufacturer: Diakoms, Russia

Price: 64,000.00 rub.


electric drive/pneumatic springs

Gynecological chair KG-3E main characteristics:

adjustment of the backrest and seat angles - pneumatic springs.

The gynecological chair KG-3E is intended for placing women on it during gynecological examinations, various procedures, as well as minor surgical interventions.
The chair frame is metal with an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine.
The soft elements of the back and pelvic sections are made of polyurethane foam (thickness 50 mm) and covered with vinyl leather.
The knee pads are made of steel profile, covered with a hygienic cover made of vinyl artificial leather with a polyurethane foam gasket. The knee pads are equipped with straps that secure the lower leg.
The palm rests are made of round steel pipe with galvanic protective and decorative coating.
The knee pads and hand rests are installed in guide bushings on the seat frame and are adjusted in height and then secured using clamps.

The basin (for collecting liquid) is made of stainless steel. The basin is installed in a cassette located under the base of the pelvic section of the chair. When changing the angle of the seat, the basin always remains in a horizontal position and does not interfere with the patient’s seating in the chair.

The footrest is rotatable and fixed to the base frame.

Control panel - manual or foot.
The base is mounted on 2 rollers and 2 supports, which prevents the possibility of accidental movement during patient examination. One of the supports is adjustable.

Advantages:

  1. Durable frame due to the use of large cross-section pipes (60x30x2 mm).
  2. The electric drive and power supply are protected by metal casings with a polymer-powder coating.
  3. The footrest is securely fastened to the base frame and, if necessary, conveniently reclines, ensuring a rigid fixation of the stand on the floor.
  4. The chair is easily transported due to two casters and is firmly installed even on uneven surfaces (the support is adjustable).
  5. The optional leg section expands the capabilities of the chair to the level of the operating table.

Specifications:

Length with horizontal position of the back and seat, mm 1680
Seat width, mm 500
Seat height adjustment is carried out using 1 imported electromechanical drive
Seat height, mm 710-1010
Height (total), mm 1450-1750
Product weight (no more), kg 98
Gross weight (no more), kg 125

The tilt angles are adjusted using 4 air springs:
seats from 0° to +20°
backrests from -10° to +70°
Color:beige, blue, green.

Standard equipment:
knee pads 2 pcs.;
step;
control panel (hand or foot);
stainless steel basin;
palm rests 2 pcs.;

Warranty period 24 months

Package: The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate.

Dimensions of corrugated cardboard packaging, mm 910x550x1650, volume, cubic m - 0.83
Dimensions of wooden sheathing, mm 1010x650x1750, volume, cubic m - 1.15

Manufacturer: DZMO, Russia

Price: 94,100.00 rub. (color: beige, foot control)


with foot control

Gynecological chair KG-6-3 main characteristics:
height adjustment - electric drive;
adjustment of the backrest and seat angles - pneumatic springs.


The stand and base of the chair are protected by decorative plastic covers.
Side guide rails for placing devices, as well as removable devices, are made of steel with a galvanic protective and decorative coating.

The knee pads are made of molded polyurethane foam in a removable hygienic vinyl leatherette cover. The knee pads are mounted on side guide rails and are adjustable in height and angle of inclination, followed by fixation using radial toothed clamps. The knee pads are equipped with straps that secure the lower leg.
The palm rests are made of round steel pipes coated with a polymer powder coating. The palm rests are attached to the side guide rails using clamps and are adjustable in direction.

The basin (for collecting liquid) is made of stainless steel. The cassette for the basin is suspended on guide bars: it slides in when the patient sits in the chair and pulls out during procedures. When changing the angle of the seat, the basin always remains in a horizontal position.
Control panel - foot.

The base is installed on 2 non-adjustable supports, 2 height-adjustable supports and 2 imported wheels with a diameter of 75 mm.

Advantages:

  1. The heavy chair is easily transported due to two wheel supports and is firmly installed on any surface on 2 fixed legs and 2 height-adjustable legs.
  2. The cushions of the back and pelvic sections are easily removed for sanitary treatment.
  3. The electric drive is protected by a decorative plastic casing.
  4. The optional leg section expands the capabilities of the chair to the level of the operating table.

Specifications:

Length (with horizontal position of the back and seat), mm 1340
Seat width, mm 590
Seat height, mm 650-950
Height (total), mm 1510-1810
Product weight, kg 100
Gross weight (without sheathing), kg 132
Permissible load (no more), kg 170
The tilt angles are adjusted using 4 air springs:
seats from 0° to +15°;
backrests from -15° to +70°.
Color: beige, blue, green.

Standard equipment:
paper towel holder
knee pads 2 pcs.;
foot control
stainless steel basin
palm rests 2 pcs.;

Warranty period 24 months

Package: The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate.

Dimensions of corrugated cardboard packaging, mm1020x660x1500, volume, cubic meters - 1.01
Dimensions of wooden sheathing, mm1200x850x1770, volume, cubic m - 1.81

Manufacturer: DZMO, Russia

Price: RUB 119,540.00 (color: blue)

Gynecological chair KG-6 ( electric drive)

Gynecological chair KG-6 main characteristics:
Adjustment of height, angles of backrest and seat - electric drive.

The chair frame is metal with an environmentally friendly polymer powder coating that is resistant to repeated processing. disinfectants, used in medicine.
The stand and base of the chair are protected by decorative plastic covers.
Side guide rails for placing devices, as well as removable devices, are made of steel with a galvanic protective and decorative coating.
The pillows of the back and pelvic sections are removable and are attached to the frame using guide rods located on the lower plane of the pillow. The soft elements are made of polyurethane foam (thickness 50 mm) and covered with vinyl leatherette.
The knee pads are made of molded polyurethane foam in a removable hygienic vinyl leatherette cover. The knee pads are equipped with straps that secure the lower leg.
The palm rests are made of round steel pipes coated with a polymer powder coating. The palm rests are attached to the side guide rails using clamps and are adjustable in direction.
The basin (for collecting liquid) is made of stainless steel. The cassette for the basin is suspended on guide bars: it slides in when the patient sits in the chair and pulls out during procedures. When changing the angle of the seat, the basin always remains in a horizontal position.
Manual and foot controls management.
The chair is equipped with a paper towel holder located inside the back section.
The base is installed on 2 non-adjustable supports, 2 height-adjustable supports and 2 imported wheels with a diameter of 75 mm.

Advantages:

  1. The heavy chair is easily transported due to two wheel supports and is firmly installed on any surface on 2 fixed legs and 2 height-adjustable legs.
  2. The cushions of the back and pelvic sections are easily removed for sanitary treatment.
  3. All elements of electric drives are protected by decorative plastic casings.
  4. The optional leg section expands the capabilities of the chair to the level of the operating table.

Specifications:
Length (with horizontal position of the back and seat), mm 1340
Seat width, mm 590
Seat height, mm 690-990
Height (total), mm 1470-1770
Product weight, kg 101
Gross weight (without sheathing), kg 133
Permissible load (no more), kg 170
The tilt angles are adjusted using 4 air springs:
seats from 0° to +15°;
backrests from -15° to +70°.

Color: beige, blue, green.

Standard equipment:
paper towel holder
knee pads 2 pcs.;
hand and foot control panels
stainless steel basin
palm rests 2 pcs.;

Warranty period 24 months

Package: The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate.
Dimensions of corrugated cardboard packaging, mm 1020x660x1500, volume, cubic m - 1.01
Dimensions of wooden sheathing, mm 1200x850x1770, volume, cubic m - 1.81

Manufacturer: DZMO, Russia

Price: RUB 180,120.00 (color: blue, Electric knee pad height adjustment)

Gynecological chair "Armed" SZ-II

Gynecological chair “Armed” model SZ-II gynecological chair with electric drive, used for gynecological examination, various diagnostic and surgical procedures. The chair can also be used as a delivery table or treatment couch.

The chair is equipped with a modern adjustment system, operating from a foot switch and from a remote control. The chair is stable and comfortable to use. This makes the examination procedure comfortable and convenient for both the patient and the doctor.

Electric gynecological chair controlled using a microprocessor and two control systems: a control panel and an electric pedal for moving the chair in different directions. All types of movements, including lifting the chair, folding/unfolding, as well as changing the angle of the rear backrest of the chair, can be performed using an electric hydraulic pump. It is safe, silent and reliable.

The trendelenburg/anti-trendelenburg position is adjusted using an electric actuator. To control the chair, it is convenient to use an electric pedal with a drip-proof coating and protection class IP*1 GB 4208 (Casing Protection Class（IP Class)).

The head section cushion is removable; underneath there is a roll of sanitary napkins.
For ease of use of the chair, the following fully functional auxiliary devices are provided:
- armrest,
- knee pads,
- container for secretory secretions,
- a rotating stand for installing a colposcope.

The upper part of the equipment is designed taking into account the structural features of the female body and has a beautiful appearance. The upholstery is made of durable material that is resistant to disinfection.

Specifications:

  • Stock size:
    Rear back length: 830 mm; rear backrest width: 550 mm,
    Seat length: 400 mm; seat width: 550 mm;
  • Range of adjustment of chair height (not counting the thickness of the mattress): 600-900 mm;
  • Rear back angle adjustment range: lift: ≥70º;
  • Seat angle adjustment range: Trendelenburg position: ≥8°, Corrected Trendelenburg position: ≥15°;
  • Equipment control: intermittent load during long-term operation, load time/interval: 2 min/5 min;
  • Power supply: AC 220V/50Hz
  • Transport characteristics:
    Packaging dimensions, cm: 148*79*87
    Gross weight: 185.0 kg,
    Net weight: 150.0 kg,
    Volume: 1.01 cu. m,
    Packing: plywood box.

Contents: Gynecological chair - 1 piece, Passport - 1 copy.
Attention! The standard upholstery color for a gynecological chair is blue!

The gynecological chair SZ-II meets international quality standards and is not inferior in quality and reliability to gynecological chairs from the world's leading manufacturers. There are registration documents valid in Russia.

Manufacturer: Kaifat Medical Science and Technical (Ningbo) Co., Ltd, China

Price: RUB 147,826.00