Vinyl soffits Grand Line® AMERIKA. Grand Line roof soffits (Russia) Grand Line soffits

You can buy Grand Line soffits from the Euromet company following types:

Vinyl soffits Grand Line® AMERIKA

Grand Line® AMERIKA - vinyl soffits for lining roof overhangs. Panels are made from polymer material with a solid or perforated surface. They cover eaves, roof overhangs, protecting roof structures and the space under the roof from moisture, draft and cold, insects and birds. Perforated panels additionally allow air to pass through and ventilate the under-roof space.

Grand Line soffit - solid

Grand Line soffit - central perforation

Grand Line soffit - continuous perforation

Grand Line spotlight colors

White, Brown.

Specifications

Advantages

Neat hemming of the cornice

Grand Line produces brown and white soffits. In the Euromet company you can choose a binding that will be combined with color scheme facade and roof. The panels look attractive and have correct geometry, give the roof a finished look.

Grand Line produces additional elements and components in the same colors as vinyl soffits. When hemming roof overhangs, you can use strips and profiles matched to the panels.

Installation without visible joints

The Grand Line soffit consists of three rectangular segments. Along the edges there are elements of the locking connection, which form an additional stiffening rib. At correct installation the panels are tightly and reliably connected, and their joint is not visible.

Color fastness

Holland Colors conducted a series of laboratory xenotests for Grand Line products. Their results confirmed the resistance of the panels to UV rays. They do not fade, retain rich and bright color for a long time. Color fastness is guaranteed for both white and brown panels.

Installation at any time of the year

At temperatures down to -10°C, Grand Line® AMERIKA cornice hemming retains strength and elasticity. According to these indicators, the product is 6 times superior to other spotlights Russian production. Improved characteristics allow installation to be carried out within 10 months of the year.

Brown will stay dark

The Grand Line company uses a special formulation of raw materials with the addition of high-quality pigments. Developed in collaboration with Penn Color, SunProof GL protects brown panels from fading. They do not lighten and retain the original, dark and rich color.

Quality guaranteed

Grand Line soffits are provided with 2 types of warranty:

• guarantee period for basic characteristics - 50 years. During this time, the panels will not delaminate, will not crack, and no swelling or areas of uneven color will form on their surface;
• The warranty period for color fastness is 11 years.

Profitable price

Vinyl soffits - practical solution. They are more affordable than wooden and metal frames, they load less bearing structures roofs do not require maintenance. In the Euromet company you can buy Grand Line soffits in white and brown color at manufacturer's recommended prices.

Characteristics of Grand Line® AMERIKA spotlights

• Not susceptible to rust, rotting, or biological damage.
• The textured surface imitates the pattern of natural wood.
• Provide ventilation of the under-roof space.
• Fireproof, do not burn.
• They are not conductors of electric current.
• Made from environmentally friendly raw materials.
• High strength, stability of characteristics, sizes and shapes.
• Simple and convenient installation.

Vinyl soffits Premium Grand Line Estetic

Vinyl soffits Estetic from Grand Line are invisible and increased strength. Perforation is made in specially shaped stiffeners. The holes provide effective air exchange, but are not visible.

Colors

White, Brown.

Specifications

Advantages of Premium GL Estetic soffit

Effective yet discreet ventilation. The stiffening ribs of Grand Line Aesthetic vinyl soffits have an omega-shaped profile (Ω). Ventilation holes are located on inner surface stiffeners and hidden by the surface of the panel. The cornice lining looks neat and allows air into the under-roof space.

The intensity of air exchange is increased. Hidden placement of ventilation holes allows you to increase their total area. It is larger than that of a soffit with partial perforation. Compared to them, Estetic soffits allow 2.5 times more air to pass through.

Looks like a tree. The surface of the soffits is textured, and the geometry of the panels is designed to accurately imitate the appearance of wooden lining.

Neat installation. The panels are securely connected to each other locking connections. The finished filing is resistant to mechanical and wind loads. The joints of the panels with each other are invisible due to the omega-shaped profile of the stiffeners and joints.

Reliable guarantee. Grand Line provides a 50-year guarantee on the main characteristics of the spotlights. Color fastness for white and brown panels is guaranteed for 11 years.

Additional elements

White color.
Outside corner Color: white, beige, caramel, brown, bog oak, peach, light green, gray, dark beige, vanilla, yellow.

Vinyl soffit Grand Line® AMERIKA– facing material, used for finishing roof eaves, ledges of country house roofs, gazebos, porches and other under-roof surfaces. Roof soffit protects the surface from precipitation and influences external environment Moreover, the perforated soffit allows the roof to “breathe” freely.

Accessories for installation of spotlights

Advantages of Grand Line® AMERIKA vinyl soffits

• Ideal lining of cornices with soffits.

Optimally selected color that goes well with dark brown (RR 32) and chocolate (RAL 8017). One of the most popular colors for lining roof eaves.

In the Grand Line® assortment, all additional elements are presented in brown color and, if necessary, can be used for installing soffits.

• Seamless installation.

The geometry of Grand Line® AMERIKA vinyl soffit is designed in such a way that the joint of the panels is not noticeable when the roof eaves are hemmed with soffit.

• Fade resistant.

The resistance of Grand Line® AMERIKA vinyl soffits to ultraviolet exposure is confirmed in writing by tests in the Holland Colors laboratory. The test results (xenotest) of the leading European dye production concern are on our website.

• Don't put off construction until spring.

The impact resistance and flexibility of Grand Line® AMERIKA vinyl soffits is up to 6 times higher compared to other vinyl soffits domestic producers. This allows installation of Grand Line® AMERIKA vinyl soffits 10 months a year. Roof lining with soffit can be carried out even at sub-zero temperatures down to -10 °C.

• Stability in brown color.

Grand Line® AMERIKA vinyl soffits in brown remain dark throughout their service life thanks to:

1. special production recipe
2. European quality paints

• Branded warranty for vinyl soffits Grand Line® AMERIKA

50 years - no deformation (cracking, swelling, delamination) and uneven fading
9 years - product color stability: white, brown

• Easy to buy

Sales and professional calculation of the number of roof soffits you need.

• Reasonable price for high quality!

The cost of Grand Line® AMERIKA spotlights is low, considering excellent quality material and long service life.

Advantages of Grand Line® AMERIKA vinyl soffits compared to alternative materials

• not subject to rotting or corrosion
• provides the roof with the necessary ventilation
• does not support combustion
• does not conduct electricity
• easy to install, convenient and easy to maintain
• resistant to physical deformation
• environmentally friendly

Do you need a consultation?

Grand Line metal soffits allow you to finish various horizontal surfaces facing down. Soffits are designed for decorative finishing eaves and end overhangs of roofs, terraces, canopies, etc. If necessary, soffits can also be used to decorate vertical elements of eaves and facades.

Soffit panels are produced in standard size 3 m or to order, in a size optimally suited for a specific object. choose a more convenient and economical option.

Take measurements of the length of the overhangs along the plane of the filing, the width of the front board and total length cornices and ends that will be hemmed with soffit.

Each object is individual and requires the choice of a hemming scheme that takes into account the design features of the overhang and the aesthetic preferences of the owner. This manual discusses the most popular, standard options. Study the proposed schemes and choose the most suitable one for your case.

Attention! When choosing a soffit type, it is necessary to take into account the features of the device eaves overhang and the need to ensure air entry into the roof and attic space. If there is such a need, only fully perforated soffit is required.

Figure 2 shows an example of using a fully perforated soffit for the option cold roof made of metal tiles with a break in waterproofing on the eaves overhang.

As a rule, in private construction, they are used as lathing for installing soffits. wooden boards or bars. The use of galvanized metal profiles is allowed.

Attention! Acceptance, movement and storage of soffit must be carried out in strict accordance with the rules specified in the warranty card and instructions for the client.

The protective film must be removed before installing the products. Shelf life of panels protective film- no more than 30 days from the date of receipt of the order. It is necessary to prevent the product in the film from coming into direct sunlight.

Attention! It is strictly forbidden to cut metal soffit with an abrasive wheel (grinder)! Using an abrasive wheel (grinder) may cause damage polymer coating and accelerated metal corrosion. Damage resulting from the use of an angle grinder is not covered by the warranty.

To cut panels, it is recommended to use cutting shears and a drill attachment. "Steel Beaver" , multifunctional cutter. Use hand tin snips to cut the panel around the lock. To install a metal soffit, you may also need the following tools: roulette , building level , roofing mites , jigsaw with metal file , screwdriver .

To touch up damaged polymer coating on the surface of panels and additional elements, use a corrector to eliminate scratches.

The panels are fastened with self-tapping screws and a press washer.

For lathing from wooden beam for fastening panels and additional elements, PSh self-tapping screws are used (No. 1, Fig. 3).

Fig.3

For metal sheathing Self-tapping screws with a PShS drill are used (No. 2, Fig. 3). Additional elements can be fastened with both self-tapping screws and steel blind rivets (No. 3, Fig. 3).

Grand Line metal soffits are equipped with standard strips, which are made in film. Standard lengths of planks are 2 and 3 m. If necessary, the order can be completed with non-standard additional elements according to the customer’s sketches.

The most popular filing method is horizontal. Bars are attached to the rafters (or fillies), which form the frame of the eaves box.

When preparing to install the soffit, control the future plane of the lining using a plumb line and a building level.

From the side of the wall and the front board, nail 2 boards to attach additional elements and soffit strips to them. If the overhang length is more than 80 cm, use 3 attachment points for the soffit (Fig. 4). The boards must be wide enough to accommodate additional elements and soffits, for example, 100 mm.

J-chamfer pattern

The scheme using a J-chamfer is the most aesthetically pleasing, as it allows you to hide the fasteners.

Use J-profile as a receiving profile on the wall side 1 (Fig. 5). Attach it to the board, close to the wall or to the facade cladding material with self-tapping screws in increments of 500-600 mm.

Attach the finishing strip along the top line of the front board 2 .

Apply J-bevel 3 to the attachment point. It should fit into the finishing strip and be attached to the sheathing board. if necessary, adjust the length of the flat part by cutting off the excess.

Insert the J-bevel into the finish strip and secure as shown (Figure 5). Usage finish bar eliminates waviness of the flat part of the J-chamfer.

When using short hooks drainage system the finishing strip may not be used, since the hooks are attached to the front board (Fig. 6). In this case, it is recommended to attach a J-chamfer 1 screws on top 2 into a pre-made perforation using an oval hole cutter.

When the front or end boards serve a decorative function and remain open, use 2 J-profiles 1 (Fig. 7).

Before installation, prepare the strip that you plan to extend, as shown in Fig. 8 for the J-profile and in Fig. 9 for J-chamfer.

The cut edge of the bottom flange of the prepared J-bevel should fit into the gap between the bottom flange and the groove of the strip it is mating to.

To prepare the strips, use hand tin snips and roofing pliers.

The J-profile can be simply mounted end-to-end.

When J-chamfer turns are present, such as on cornices hip roof, start installing it from the corner.

To prepare the J-bevel for turning, mark the bend line of the plank at the turn 150 mm from the edge (Fig. 10).

Cut the receiving groove to the fold line, leaving the folding of the bottom flange.

Make a cutout on the bottom shelf from the 45° bend line. Cut off 25mm of folding at the edge.

Fig.10

Fold the J-bevel along the line so that the 45° cut edge of the bottom flange is on the outside. The short edge of the plank is not attached to the sheathing; it will be pressed against the front board by the next plank when joining (Fig. 11).

At the ends of the front board, for example, at the transition from the cornice to the gable, to frame the J-bevel 1 you can use a finishing strip 2 or fold the edge to hide the edge (Fig. 12).

Prepare the soffit panels so that the length of the panel is 40 mm less than the length of the eaves overhang from the wall to the edge of the fascia board.

Start installing panels from the edge or corner of the eaves.

Install the prepared panel 3 all the way into the J-profile groove 2 , insert the second edge into the groove of J-chamfer 1. Slide the panel into the middle of the grooves and secure with self-tapping screws (Fig. 13).

Do not attach the soffit too tightly. Leave a distance of approximately 0.8-1 mm between bottom edge the screw head and the panel so that it has free movement horizontally (Fig. 14).

The self-tapping screw is screwed into the center of the perforated hole. If the hole does not fit into the sheathing, make a hole with a notch (Fig. 19).

If the requirements for appearance binders allow you to leave the fasteners open, you can use Front bar 1 (Figure 16).

Fasten the J-profile 3 and Finish bar 2 , as described above.

Prepare the soffit panel so that the length of the panel is 10-20 mm less length eaves overhang from the wall to the edge of the front board.

Extension of the Frontal bar can be done with a simple overlay. The overlap between the slats is 25-50 mm.

A more aesthetic option that allows you to hide the cut edge is an option with bends on the joining edges (Fig. 17).

Prepare the planks as shown in the diagram. Bends are made 180° so that the planks fit tightly into the hook during installation. After joining, the joint can be tapped through the block with a mallet.

To create a turn, mark the fold line and make a cutout, as shown in Figure 18.

Bend the Front Strip along the line so that the cut edge at 45° is on the outside, and fasten as described above.

If rafters with a width of 200 mm or more are used and are not cut horizontally, front board can turn out to be quite wide, more than 250 mm. In this case, you can finish the front board with soffit panels 1 .

The figure shows a variant of the transition from the hem to the front board through the External Complex Corner Plank 2 (Fig. 19).

A less aesthetic, but simpler option is to use 2 J-profiles (Figure 20).

Install additional elements and soffit panels according to the rules described above.

The hemming option is quite popular, when the cornice box is not made, and the hemming is done directly along the rafters.

The figure shows an option using a standard J-bevel 1 , J-profile 2 and finishing strip 3 . The corner is bent to the required indicator using two boards or bars.

For this type of filing, almost all the variations described above for horizontal method fixing spotlights.

The rotation can be made both diagonally (Fig. 22, Fig. 23) and at a right angle (Fig. 22, Fig. 23). In both cases, an H-profile (Fig. 22, Fig. 24) or 2 J-profiles (Fig. 24, Fig. 25) can be used at the junction of the soffit panels. If you do not need to hide the fasteners, use a simple docking strip.

Fig.22	Fig.23

Fig.24	Fig.25

Before installing the plank, mark it, placing it at the installation site so that the gaps between the additional elements are minimal. Trim off the excess (Fig. 22). Secure the strip with self-tapping screws to the sheathing.

Grand Line Aesthetic soffits are a premium product with unique perforations, which are located on the walls of the panel stiffeners. Compared to traditional partially perforated soffit, Grand Line Estetic panels allow 2.5 times more air to pass through due to the increased area of ​​the ventilation holes

Parameters of the GRAND LINE Premium Estetic soffit
*Full hidden perforation.
*Material - PVC (plastic);
*Length - 3000 m
*Width - 246 mm
*Usable panel area: 0.738 sq.m.
*Manufacturer - GRAND LINE (Russia).

ATTENTION!!! On this product There is an additional discount for pickup. (Promotions and discounts are cumulative)
Also, when purchasing spotlights, you get a 30% discount on metal drain" ", or 25% for plastic drainage " "

• Product
• Description
• Payment and delivery

Soffit “Estetic” from the manufacturer “Grand Line” is a new product among analogues, distinctive feature which is a hidden perforation. The “Aesthetic” soffit panel imitates natural clapboard cladding. The soffit is in the form of three processed fragments of “lining”, between which special holes are hidden.

Panel dimensions: length - 3000 m; width - 285 mm. Full hidden perforation.

Holes in the soffits are necessary to ensure air circulation. Ventilation under the roof is important, especially for steel roofs.

Finishing with soffits will provide the necessary ventilation, which will extend the service life of both the roof itself and the overall rafter system, including insulation. Perforation in the form of holes between the “planks” looks more advantageous and neater, in contrast to conventional vinyl soffits with visible perforations.

Payment Methods

Payment in cash.
You can pay in cash directly with the courier when he delivers the order, or in the store.

Payment by bank card.
By bank card You can pay only in our store at Odintsovo st. Vnukovskaya d11.

Cashless payments.
An invoice for payment is generated after placing an order. A specialist will contact you to clarify details.

Delivery

Pickup from our store at Odintsovo, Vnukovskaya street 11 Construction market"Akos" pavilion 12X. Opening hours from 9.00 to 19.00, seven days a week. Convenient parking.

Delivery in Moscow (within the Moscow Ring Road) up to 500 kg - 500 rubles

Outside the Moscow Ring Road - 500 rubles + 25 rubles km

Please call for prices for delivery of goods weighing more than 1.5 tons.

Delivery to regions of Russia.

Receiving your order at the point of delivery transport company"PEC"

You can receive your order at any terminal of the PEC transport company in your city, or order it to your address.

Delivery times and costs depend on the region and dimensions of the cargo; you can check the cost of your order with the online store manager before confirming your order.

You can independently calculate the cost of delivery to your city by following the link to the website of TC "PEK" https://pecom.ru/services-are/the-calculation-of-the-cost/

For simplicity and low cost of communication, write with all questions to Whats App or Viber to the number 89031604206. You can also find out the weight and dimensions of the cargo to calculate the delivery yourself.