Altai - portable stove. Stove for baths and saunas, wood-burning stove, electric stove Altai stove for a mobile bath

The PechiRUS company sells equipment and accessories for baths and saunas. Here you can find stoves for baths and saunas (as well as water tanks, heating boilers, bath stones, etc.) from the world's best manufacturers at very reasonable prices. We work directly with such worldwide well-known manufacturers furnaces such as “Harvia”, “Termofor”, “Teplodar”, “Professor Butakov”,"Varvara», and therefore we can afford to sell the products of these companies without inflating prices. The assortment includes stoves of various types and designs, a wide selection and a wide range of prices that will allow you to choose exactly the equipment for your bath that best suits it.

Wood stoves « Harvia » are made exclusively from heat-resistant steel. These stoves are painted with fire-resistant paint, which ensures that the stove will retain its presentable appearance for a very long time. The wood burning stoves we offer are equipped with cast iron doors with built-in glass, which will allow you to admire the process of the fire burning. Such stoves have increased heat transfer and are distinguished by their efficiency both in terms of fuel consumed and in terms of space occupied. Furnaces from another world market leader, the Kastor company, are characterized by their oldest history and high efficiency, which is achieved due to complete afterburning of the fuel. Kastor sauna stoves are made of 8mm heat-resistant steel; glass that can withstand high temperature heating Great solution for heating large premises will become heating stoves- they are designed in such a way that air circulates between the firebox and the wall of the stove, ensuring uniform heating of the entire room. Such furnaces are made mainly of cast iron or refractory steel. We recommend heating stoves for you"Professor Butakov", as well as "Teplodar" and "Termofor". Russian heating boilers and stoves are good because they are initially manufactured taking into account the harsh weather conditions of our country, and fully comply with high international quality standards.

The electric sauna stoves offered by our company are environmentally friendly, safe, take up little space and are conveniently regulated using a remote control. remote control. In addition, they are equipped with an overheating fuse and a thermostat. Based on the size of the steam room, the quality of thermal insulation of the walls and the height of the ceilings, our consultants will help you choose the stove that best suits the given parameters. As an alternative to sauna stoves, we offer infrared emitters. The difference between an infrared cabin and a regular sauna is that in it the body warms up much deeper and is removed from the body along with sweat. large quantity harmful substances. You can choose infrared emitters " Harvia ", which are easy to install, pleasant to the touch, environmentally friendly, and have a healing effect on the human body.

The Altai stove is specially designed for mobile sauna. Installation in hiking conditions It only takes a couple of minutes.

You don't need stones to get steam! — built-in steam generators of the Altai produce a lot of light, saturated steam within 15-20 minutes after kindling.

• The Altai stove is made of heat-resistant high-alloy stainless steel.
• The stove is packed in a convenient travel bag, and the disassembled modular chimney is placed in the stove firebox.
• The folding legs of the stove are securely fixed when folded and unfolded, preventing it from tipping over even in strong gusts of wind.
• The stove is equipped with a door with heat-resistant glass, through which the reflections of a living flame illuminate the mobile sauna.
• A packaged set of mobile sauna with stove and shelf fits in the trunk of a car.

The Altai stove can also be used for temporary heating of rooms with a volume of up to 70 cubic meters

The stove comes in a bag.

Overall dimensions: 615x280x475 mm

Weight: 14 kg

A special feature of the Altai stove is the presence of a multi-section high-speed steam generator made of stainless steel, which allows you to obtain exceptionally light steam without the use of stones, which makes the stove ideal for a mobile sauna.

The furnace is made of sheet stainless structural steel with a chromium content of 13%, which ensures long-term operation at high temperatures.

Structurally, the stove consists of a firebox (1) (Fig. 1), enclosed in the convector (2), and the door (3). A flame cutter (4) is located inside the firebox, ensuring circulation of hot flue gases and as a result better warm-up furnace walls, and grate (5).

The stove is installed on legs (6) hinged to the firebox. Steam generator plates (7) are installed on the side walls of the firebox. The convector screens hard thermal radiation from the walls of the firebox and provides convection currents that accelerate the heating of the room.

The upper surface (8) of the firebox can serve hob for cooking and heating food. To organize the chimney, the stove kit includes a transition pipe (9), six chimney pipes (10) and a screen pipe (11).

The legs in the working position must be folded back (Fig. 2) and are fixed in this position by a limiter (3) stamped in the corner of the inner bracket (2). To fold the legs and bring the stove into transport condition, you need to pull the plate with the limiter outward and turn the leg towards the bottom of the firebox until it stops.

Soft, dry and exceptionally light steam can be obtained from the built-in steam generator immediately after the furnace reaches operating mode, i.e. 5-10 minutes after the furnace starts firing.

To do this you need to fill clean water into the cavity formed by the side wall of the firebox and the upper bend of the side wall of the convector. Water, flowing sequentially through the channels through the steam generation chambers, evaporates on the hot walls of the firebox to form finely dispersed steam.

The frequency of water filling is regulated by individual sensations. It is impossible to “fill” the Altai stove with water, as happens with conventional heater stoves. “Excess” water will simply flow onto the ground without lowering the temperature or worsening the climate in the steam room.

ATTENTION! The manufacturer has the right to introduce minor changes into the design of the stove, without compromising its consumer qualities.

ATTENTION! It is prohibited to operate the Altai stove outdoors.

ATTENTION! Must be removed before first use protective film from the convector oven.

Installation of the stove and installation of the chimney.

1. Remove the oven from the bag.
2. Install the legs in working position. To do this, you need to press the lock button and rotate the leg around its axis until it locks in the open position (Fig. 2).
3. Place the stove on the corner of the tent under the pipe hole. Level it up.
4. Assemble the chimney as shown in Figure 1, passing it through the hole in the ceiling of the tent. The axis of the chimney must be vertical.

Operation of the Altai stove in a mobile bathhouse

Make sure that all elements of the stove are functioning properly. Fill the stove firebox with finely chopped dry wood (~2.5x2.5 cm) and light the stove. Next, if possible, add dry firewood of medium size 5x5 cm into the firebox.

ATTENTION! The stove grate is designed in such a way that coals accumulate in the rear part of the stove. When operating the stove for a long time, it is necessary to use the existing poker to move the coals to the front of the firebox.

After reaching a temperature of 80-100 degrees in the sauna tent (after 10-20 minutes), you can begin bathing procedures. To obtain steam, small portions of water are poured into the cracks formed by the bend of the side convector and the wall of the firebox. The volume of steam produced is selected based on personal feelings.

IMPORTANT!!

The stove can only be heated with wood or charcoal! It is strictly forbidden to heat the stove with coal, as well as branches with pine needles, because the spark arrester may not separate large smoldering particles of pine needles and the roof of the tent may be burned! It is recommended to use paper only for ignition!Coal has a too high combustion temperature, which can damage the stove.

Don't forget to clean the chimney of soot. At long-term use products - at least once a day. This will prevent heated soot particles from flying out of the chimney.

Features and Benefits

Stove "Altai" (Patent No. 70966)

A good-quality, reliable and easy-to-use stove, the unique feature of which is the presence of a high-speed steam generator in its design, which allows you to obtain exceptionally light steam without the use of stones, within 10-20 minutes after heating.

The design of the stove was developed by Teplodar specialists specifically for a mobile bathhouse. Heated with wood. Made from stainless, heat-resistant steel, ensuring a long service life.

A truly high-quality, reliable and easy-to-use stove, the main highlight of which is the presence in the design of a multi-section high-speed steam generator made of stainless steel. It allows you to obtain superheated, exceptionally light steam without the use of stones, immediately after the furnace reaches operating mode (10-20 minutes after heating).

The oven uses the convection principle of air heating. The firebox with the steam generator is covered by a convector casing, which, due to the powerful convection flow it creates, significantly speeds up the process of heating the air in the steam room (tent). In addition, the convector casing provides fire safety, shielding the hard infrared radiation emanating from the hot walls of the firebox.

The oven is equipped with a door with heat-resistant glass, dismountable modular chimney and quick-release legs. When disassembled, all components are easily placed inside the firebox. Supplied included travel bag for transportation.

Tent for mobile sauna “Altai” (Patent No. 99803)

The tent frame is made of high-strength aluminum tubes with protective coating. Assembly and installation of the frame takes no more than 2-3 minutes.

The tent awning is made of fabric "Taffeta 210 T PU 3000mm" with polyurethane coating, which has excellent thermal insulation, windproof and moisture-resistant properties. The top of the tent is made of fire-resistant LT 500 fabric.

At the top of the tent there is a passage unit (cut) for the chimney outlet, made of non-flammable material and ensuring fire safety. If necessary, the passage unit is closed with a special valve.

Along the lower perimeter of the tent walls there is an apron, pressed to the ground with soil (stones, snow) to ensure the best thermal insulation.

The design of the entrance block of the tent is unique (Patent No. 99803). Designed specifically for a mobile sauna. Providing reliable thermal insulation, the entrance block allows emergency leave the tent without hindrance.

Shelf for hovering (Patent No. 69747)

The shelf folds and unfolds easily.

Design features allow you to withstand weight up to 240 kg.

The surface of the shelf is made of moisture-resistant plywood, and the frame is made of steel pipes with polymer coating.

The components of the mobile bath can be used independently and for other purposes. So, with the help of a stove you can temporarily heat residential and household premises up to 70 m3 (tents, cottages, garages, greenhouses) or cook food. The shelf can be used as a camp table, or a tent for its intended purpose. The entire set easily fits in the trunk of a car.

The Altai stove is specially designed for a mobile bathhouse. Installation in field conditions takes only a couple of minutes. To lead the chimney into the ceiling of the branded tent, a passage unit made of non-flammable material is built into the ceiling. You don't need stones to get steam - the built-in steam generators of the Altai produce a lot of light, saturated steam within 15-20 minutes after kindling.

• The Altai stove is made of heat-resistant high-alloy stainless steel.
• The stove is packed in a convenient travel bag, and the disassembled modular chimney is placed in the stove firebox.
• The folding legs of the stove are securely fixed when folded and unfolded, preventing it from tipping over even in strong gusts of wind.
• The stove is equipped with a door with heat-resistant glass, through which the reflections of a living flame illuminate the mobile sauna.
• A packaged set of mobile sauna with stove and shelf fits in the trunk of a car.

"Altai" can be used for temporary heating of rooms with a volume of up to 70 cubic meters.

A good-quality, reliable and easy-to-use stove, the unique feature of which is the presence of a high-speed steam generator in its design, which allows you to obtain exceptionally light steam without the use of stones, within 10-20 minutes after heating.

The design of the stove was developed by Teplodar specialists specifically for a mobile bathhouse. Heated with wood. Made from stainless, heat-resistant steel, ensuring a long service life.

A truly high-quality, reliable and easy-to-use stove, the main highlight of which is the presence in the design of a multi-section high-speed steam generator made of stainless steel

It allows you to obtain superheated, exceptionally light steam without the use of stones, immediately after the furnace reaches operating mode (10-20 minutes after heating).

The oven uses the convection principle of air heating.

The firebox with the steam generator is covered by a convector casing, which, due to the powerful convection flow it creates, significantly speeds up the process of heating the air in the steam room (tent).

In addition, the convector casing ensures fire safety by shielding hard infrared radiation emanating from the hot walls of the firebox.

The stove is equipped with a door with heat-resistant glass, a collapsible modular chimney and quick-release legs.

When disassembled, all components are easily placed inside the firebox. A travel bag for transportation is included.

Specifications:

Installation diagram:

Installation of the stove and installation of the chimney:

1. The oven is removed from the bag.

2. The legs are installed in the working position and secured with pins on the chain.

3. The stove is installed in the corner of the tent under the hole for the pipe, the legs of the stove are sunk (hammered) into the ground or snow for stability.

ATTENTION! The rear legs of the stove are sunk into the ground more than the front legs to ensure natural closing of the door at an angle.

4. The chimney is assembled from 6 modules of stainless steel pipes with a thickness of 0.5 mm.

5. The chimney is inserted into the hole in the plate (ceiling groove), a screen pipe is put on the lower chimney module and the chimney is installed on the stove manifold ring.