How to connect interactive TV. Quick access to the list of channels, how to add a channel to “Favorites”. How to set up digital television from Rostelecom

The rapid development of technology allows users to receive increasingly better services. Those who decide to connect Rostelecom interactive TV to their TV should expect a noticeable increase in the number of available functions and improved broadcast quality. At the same time, subscribers will have an increase in the number of available TV channels, since HD and Ultra HD channels will become available to them.

All this will make viewing more enjoyable and convenient. In addition, the interior surrounding the viewer can also improve, since IPTV can work without a set-top box and numerous reasons that can ruin the look of even the most spectacular room.

Types of equipment for interactive TV

Having decided to connect modern television, the first thing you need to think about is making the right choice equipment. In order not to make a mistake in making the final decision, you should think in advance about:

• the method of connecting the receiver to the TV (especially important for Smart-TV);
• connectors required by the subscriber and USB connectivity;
• quantity available internal memory at the selected device.

Additionally, there may be other requirements. Considering the huge range of equipment available in 2019, you should not limit yourself in your desires. And to simplify the choice, you should turn to specialists for help, simply conveying the existing requirements to them.

Consultants will definitely select the equipment that will be ideal for the client.

Connecting and setting up Rostelecom interactive television via a router

For those who expect to connect Rostelecom interactive TV, the instructions instruct you to start by connecting the equipment. It is necessary to connect all cables in series and make sure that each contact is securely fastened. After this, you can proceed to setting up the router. This is done through the computer to which the device is connected. Users will have to:

1. open any browser and enter the menu by entering the combination 192.168.1.1 in the address bar;
2. enter your password and login (usually admin/admin);
3. enter the section mentioning IPTV;
4. in the IGMP section enter enable;
5. in the next line select bridge;
6. after which all you have to do is select the connection port (LAN4);
7. and save the result.

It is worth emphasizing that the sequence of actions remains almost unchanged, regardless of the router model.

Setting up interactive TV: instructions for use

Having dealt with the router settings, you need to configure the television itself. This procedure noticeably simpler than the one described above and will not cause serious difficulties for subscribers. To start watching your favorite TV channels and programs, you need to prepare a remote control and a service agreement, which contains all the codes required by customers. If you already have all of the above, you need:

1. connect the set-top box and TV (regardless of the models of equipment used);
2. turn on the TV in input or AV mode;
3. enter your username and password;
4. if necessary, specify a PIN code (by default 0000 or 1111);
5. wait for the menu to load;
6. start watching.

It is worth adding that all the necessary settings are pre-installed by the company’s specialists, so users usually just have to connect the equipment and enjoy movies and shows.

Convenient interactive TV menu

A huge advantage of modern IPTV is the breadth of subscriber capabilities. Owners of the Rostelecom set-top box for interactive TV are offered:

• convenient menu for selecting TV channels;
• the ability to watch a TV program;
• broadcast control function, which allows you to pause broadcasts and continue watching from the desired point;
• recording the program onto the subscriber’s desired media (flash card);
• rental of films, for each of which the provider has a special price;
• additional applications that allow you to receive a lot of useful services at the request of the equipment owner.

In addition, it is possible to set an access code, parental controls and a number of other functions.

Watching TV on a computer

In addition to the ability to watch your favorite programs on TV, those who connect are offered to receive broadcasts via Wi-Fi on tablets or use a computer to watch.

In the first case, your smartphone or tablet must have a special application that can be downloaded from the official website.

To use computers and laptops, you need to visit a special website (iptv), the link to which can be seen on the provider’s portal. In this case, those combinations that were previously used to connect television are suitable for authorization.

If difficulties arise, you need to check whether the installed software is capable of supporting broadcasts High Quality. If necessary, you will have to update it to the appropriate level.

Additionally, you can pay attention to the antivirus and firewall. Sometimes they block the video from showing.

Difficulties connecting to interactive television

If you use the user manual when connecting interactive television Rostelecom, the likelihood of problems becoming minimal. But, if you couldn’t avoid them, you should:

• make sure that all services have already been paid for;
• check the reliability of fastenings and connections;
• reboot the equipment.

If the above methods of dealing with difficulties do not help, all that remains is to call support operators. The telephone number of the company’s contact center is 8 800 10 00 800. But to receive assistance, you should prepare a service agreement and passport details of the owner of the equipment in advance. They are necessary for operators to identify the caller and provide him with full, comprehensive assistance.

Access to “Interactive TV” is carried out from the TV screen through a set-top box connected to it. Each time the set-top box is turned on, it is accompanied by loading software(current firmware version) from the service provider’s servers.

When activating the service for the first time, you will need to enter a login/password. This data is indicated on the bottom panel of the TV set-top box. After successful download, the start menu screen will appear.

Menus and Viewing Modes

To go to the main menu, press the “BACK” or “MENU” button.

TV

– access to TV channels, program guides, recordings of future ones and viewing of already broadcast programs

You can select a channel, view the program guide, set a reminder for a program, add a program to your favorites, or watch a program that has already aired. Channels can be added to the Favorites list.
The list of favorite channels is individual for each profile and can consist of any number.

When you add a channel to your favorites list, the channel numbering does not change.

Video rental

– access to a catalog of films, TV series, video clips and other video materials

Using the “RIGHT/LEFT/UP/DOWN” buttons, select the movie you like. For convenience, films are grouped into categories.
To watch a movie, you must select “Watch” or “Buy for collection.” The film will start in trial viewing mode, during which you can refuse to watch it. A notification at the top of the screen informs you that playback is in preview mode.
While watching, you can pause the movie, fast forward and rewind, and select an audio track.

What to see

This section is intended to help you navigate the variety of Interactive TV content and choose what will be truly interesting to you. The section contains films and programs selected based on your preferences.
If you are interested in a movie, but want to watch it later, then you have the opportunity to postpone it in order to return to watching it later.
To do this, you need to click the “Delay” button on his card. You can also give movies to friends from the Rostelecom social network.

Files

— viewing photos and videos from removable media

This function allows you to view photos and videos from a removable USB storage device. FAT16, FAT32 and NTFS file systems are supported. For large USB drives (64 GB or more), you must use the NTFS file system.

exFAT file system is not supported operating system, used in the set-top box. Therefore, files on media formatted in exFAT will not be visible.

Services

– weather forecast, exchange rates, Karaoke music service and access to social networks VK, Facebook, Twitter, Moy [email protected]

The Rostelecom social network is connected by default and is always active. This network includes all subscribers of Rostelecom Interactive TV. Similar to communication on VKontakte, Odnoklassniki, you can look for friends, exchange opinions, and give gifts.

My

– access to orders, recordings, deferred movies, set TV reminders, favorite TV channels and shows, and information messages

Your content is collected here - selected TV channels, programs, personal messages. Channels, programs, and recordings that have been marked as liked automatically appear in this section.

The transfer will not be recorded if its volume exceeds the available volume within the quota. In order to record more programs, you need to add a larger quota or delete old recordings.

Search – search for TV shows, movies

If you start typing the name of a TV show, movie, artist or actor in the search bar, the search results will automatically appear on the left side of the screen.

Services

Service management

– allows you to manage Interactive TV services, connect and disconnect them, change the composition of TV packages, and view the status of your personal account.

To activate a service or package, in the Service Management section, you must select the desired category and press the “RIGHT” button. After selecting the desired service, click the “OK” button.

If you try to connect a package that is incompatible with already connected packages, the application will warn you about this!

Connected services

– a list of all services currently connected to your account

When viewing the list of services, the current amount of the subscription fee for all connected services is displayed in the upper right corner of the screen.

Purchase history

– list of purchased content from the Video rental section

TV packages

– list of connected and available for connection TV channel packages

The description of each package displays the cost of subscribing to it.

Add. services

– list of connected and available additional services

Subscription

– A movie subscription allows you to watch unlimited movies of the selected category from the “Video Rental” section for a period of time specified by the operator

To subscribe to a subscription, in the Service Management section, select the “Subscription” category and press the “RIGHT” button. After selecting the desired subscription from the proposed list, click the “OK” button. A description of the subscription will appear on the screen. Press the button“Connect” and confirm the connection. After successfully connecting the service, a “CONNECTED” sticker will appear on it.

Karaoke

– karaoke subscription

A music service with which you can sing songs of popular Russian, Soviet and foreign artists and groups. Depending on your tariff, access to this service is provided for free/paid.

File quotas

– disk space on the server for recording TV programs for delayed viewing

A file quota is a disk space on a server within which you can record TV shows to watch later. The default file quota is 7 GB, which is enough to store approximately 2.5 hours of standard quality video (length depends on the parameters of the specific video and may vary). File quota consumption can be viewed in the “MY” – “Records” section.
To activate an additional file quota, you must open the “Service Management” – “File Quotas” section and, after pressing the “RIGHT” button, select the desired quota.
Recorded programs are stored for 30 days from the date of recording. After 30 days they are automatically deleted.

To save programs for a longer period, you need to add it to the archive!

Other

– additional functions: voluntary blocking of services, password recovery

These functions are available only for the profile master

View control function

You can record the program if you have activated the additional “Viewing Control” service and have the required file quota available.
To record a program, open its card or, in viewing mode, press the “UP” button, then “Record”. The recorded program will be available in the “My” – “Recordings” section (programs that have not yet started will become available after the recording is completed).
If the service is unavailable or not connected, a corresponding message will appear on the screen. Also, if there is not enough file quota for recording, the system will also issue a corresponding notification.
For serial programs (TV series, educational programs, etc.), the function of recording all episodes is available.
You can also watch a past program if no more than 72 hours have passed since its broadcast.

Viewing 3D content

Viewing 3D content is available if the TV channel and your TV supports 3D mode. To switch the channel to 3D in viewing mode, you must press the “UP” button. In the window with the description of the program, select “SETTINGS” and activate “3D mode”.

System Settings

Video output

— changing the output video resolution (576i, 1080p) and analog video color mode (SECAM, PAL, NTSC)

If during the selection process you set an output video resolution that is not supported by the TV, then after loading the set-top box on the TV, a black screen will appear. To return to default settings:
— Press and hold the RESET button until the LED starts flashing;
— After the LED blinks, release the RESET button;
— Unplug and insert the power cord.

Video aspect ratio

— If the image extends beyond the screen, you should try setting the screen aspect ratio to 4:3 or increasing the width of the dead zone. The width of the dead zone is a distance from the borders of the screen to compensate for the TV’s scan overshoot (cropping of the video image at the edges, which the TV can produce)

Interface resolution

— HD mode is selected by default. If the inscriptions in the menu are difficult to read and small (this is important on old TVs with a small screen diagonal), then you need to change the interface resolution to SD mode.

Restore factory settings

— when selecting this item, the following system settings are installed in the system:

The proportions of the resulting image on the screen also depend on the TV settings. In the TV menu, set the video aspect ratio to “One to One”, “True”, “Original” to adjust the image using the settings of the set-top box (the option name and values ​​depend on the specific TV model).

Profile management

You can create user profiles with different access rights to TV and other services. After rebooting the set-top box, the profiles are saved and there is no need to create them again. Creating different profiles allows you to customize TV for each family member and ensure safe viewing for children.
By default, there is always a profile in the application master with PIN code 0000 , which has full rights to create and edit other profiles.

Parental control

Parental controls allow you to limit viewing time and set access levels for channels. There are several levels of access:

1. Maximum access level

2. Access to channels.
For each channel you can set the desired limit:

— Allowed— the channel is displayed in the TV menu and is available for viewing;
— PIN (4 characters)– the channel is displayed in the TV menu; to view it, you must enter the PIN code for this profile;
— Forbidden– the channel is not displayed in the TV menu for this profile.

3. Video viewing interval in minutes (remaining)– the maximum time allowed for watching TV, including TV channels and films from the “Video Rental” section, for a given profile per day. The time countdown starts from 00:00 of the current day.
An automatically updated counter of the remaining viewing time is displayed in parentheses. When the counter reaches zero, playback stops until the next day.

Adult content filter— organizes and controls access to “adult” content by setting the profile access level: from low level – “3+” (only children’s content is allowed, films for family viewing) to high level– “18+” (any content is allowed, including “films for adults”).
The higher the value, the more “adult” content is available to a profile with this access level.

Profiles with access level “3+” can watch TV shows and films that have no restrictions: children’s films, cartoons. This access level is suitable for children.
Viewing “adult” content is available to profiles with access level “18+”.
In addition, intermediate values ​​are provided, which also correspond to age restrictions: “12+” - not recommended for viewing by persons under 12 years old, etc.

By default, the maximum and current access level for the “master” user is “18+”.

Controlling the TV using the remote control from the set-top box

The remote control is universal: it can be used to control both a set-top box and a TV.
To do this, you need to connect the remote control from the set-top box to the TV in one of the following ways:

Connection according to manufacturer's code

1. Press the “OK” and “TV” buttons simultaneously and hold for two seconds until the LED on the “TV” button blinks twice. The remote control has entered programming mode.
2. Using the remote control, dial the 4 digits of the code corresponding to your TV model. If the code is entered correctly, the LED will blink twice. If the LED lights up at long time, then you need to repeat procedure 1-2.
3. We try to send a command from the remote control to the TV, for example, increase the volume. If the volume on the TV is controlled, then the code is set correctly and everything is configured correctly. Otherwise, you need to try another code and repeat steps 1-3.

Manufacturer code table

Connection by automatic code search

The setup must be done with the TV turned on!

1. Press “OK” and “TV” at the same time and hold for two seconds until the LED on the TV button blinks twice.
2. Enter 991 from the remote control.
3. Press “CH+”, and for each press of the “CH+” button, the remote control selects a code from the internal list and sends a command to the TV to turn off.
4. If the TV turns off, you must press the “OK” button to save the code. If the code is saved successfully, the LED on the “TV” button will blink twice.

Problems and ways to solve them that arise during the use of the service can be viewed

Watching low-quality videos with poor images and flickering images is gradually fading into the background. Today, much attention is focused on the virtual broadcast of TV channels and favorite programs, made in excellent HD quality. This is exactly what Rostelecom interactive television is. Instructions for its settings, despite its availability, confuse many users.

We tried to solve this problem and explain as clearly as possible how to install and configure television from this provider.

What is Rostelecom?

Rostelecom is one of the largest Russian companies, also known in Europe and the former CIS countries. This organization specializes in providing paid services communications and communications to the population. The total number of users connected to this provider, per this moment has long since surpassed the 9 million mark. As you can see, Rostelecom interactive television (the instructions for setting it up allow you to correctly sort all channels) is a fairly popular service.

Among the company's clients you can meet not only individuals, but also representatives of the government, healthcare, security and education, housing and communal services and government agencies.

Briefly about interactive television and service packages

As we have already said, virtual television allows you to watch videos in excellent quality. And this without visual clutter, with minimal or no advertising. However, to connect to the service, you must first select the appropriate Rostelecom (interactive television) packages. Among them we highlight the following programs:

• “Your Starter 2.0” (opens access to 100 different channels).
• “Your optimal 2.0” (helps connect up to 120 channels).
• “Your Advanced 2.0” (provides access to 140 channels).
• “Your maximum 2.0” (connects 170 channels at once).

In total, all these packages are positioned as basic, intermediate and advanced. On initial stage a small list of channels is connected, on average their number increases slightly, and at the “advanced level” interactive television channels reach their critical maximum.

What channels are available to subscribers?

Immediately after a simple connection procedure, subscribers become available the following types channels:

• Sports.
• Essential.
• Children's.
• Cognitive.
• Musical and entertaining.
• Religious and ethnic.
• Adults.
• Movies and TV series.

For example, the “Your Easy 2.0” package includes 6 informational, 19 broadcast, 1 children’s, 3 educational, 4 music, as well as one entertainment and religious channel. However, all these interesting things will become available only after setting up interactive television and, of course, paying for services.

What types of connections are there?

In order for interactive television to work, you need to connect the appropriate equipment. At the same time, this can be done most different ways. They can be divided into three types of connection:

• Using a router.
• Via Wi-Fi hotspot.
• Using a special PLC adapter or adapter.

This is how Rostelecom interactive television is connected. Instructions for setting it up using all of the above options will be discussed with each connection means separately.

Interactive television "Rostelecom": instructions for connecting a router

One of the most common options for connecting television is to use a special router. To connect it, just follow these steps:

• Extend the Internet cable from the box (at the entrance) to the set-top box.
• Connect the cable to the router.
• Connect the set-top box (using the HDMI connector) to your TV.
• Plug the device into a power outlet.
• Fix excess wires as securely as possible and hide them under special protection or carpeting.

And if everything is done correctly, almost immediately after switching on you will have access to the Rostelecom TV program package. In this case, payment for the services of a specialist is not provided, but provided that you carry out the connection yourself.

Brief instructions for connecting Wi-Fi

To make this connection, you must first purchase a special wireless adapter. Then it will be necessary to install it on the provider’s set-top box itself and connect it. There is no need to configure anything here. It is enough to use the standard settings.

This method is suitable for those users who do not want to run the cable across the entire room. However, before purchasing an adapter, be sure to consult with company representatives, since not all store-bought devices are suitable for a branded set-top box.

How to connect the PLC adapter?

To connect you will need a special device (PLC adapter). It is connected through a regular outlet and acts as a kind of adapter that connects all the wires via a single local network.

To begin, connect the cable to the adapter and your TV or computer. Connect all devices to the network and start scanning channels. The advantage of this connection method is the ability to connect several Rostelecom devices to the network simultaneously. Payment for Internet connection services is made shortly before all devices are connected to the network.

How do I pay for the provider's services?

You can pay for and connect to Rostelecom’s communication services directly on the company’s website moscow.rt.ru through the “Payment” tab. Moreover, this can be done by card, using virtual wallets and mobile phone. In addition to paying for the company’s services, through this service you can pay for housing and communal services, top up your account, and even transfer money from one card to another.

How to configure the connection correctly?

The setup is done as follows:

• Set your TV to (AV) mode.
• Connect to the Internet.
• Using the menu that appears, select “Login” and enter your password and login (specified in the agreement).
• Click on "Connect".

If everything is done correctly, after the above actions A list of channels will appear on the TV screen. This means that the setup was successful.

Many Rostelecom clients have already appreciated the benefits of the View Management service. A convenient set of functions allows you to watch your favorite TV programs in comfortable mode, record your favorite films and save them in the archive so that you can enjoy watching them at any time, pause the broadcast, and so on. By connecting to the package, you choose a convenient time to watch TV.

Thanks to the wide range of options included in the Viewing Control package, Rostelecom subscribers have the ability to independently plan their own TV program at the most preferred time.

The package of options is presented:

1. Pause function, which allows you to stop the moment you are watching
   channel to scroll through the broadcasts of other TV channels. The broadcast is continued by unpausing.
2. The view first function, which allows you to
   watch any program that was shown less than 72 hours ago, or that started broadcasting, by selecting the appropriate option using the remote control.
3. The recording function that provides recording of the selected one has not yet been
   the TV show that started. It is possible to record one or more episodes. Each Rostelecom subscriber has the right to count on 7 GB of memory for storing records. In addition, it is possible to additionally purchase the desired number of GB.
4. The program archive function, through which subscribers have access to broadcasts
   any TV program broadcast no more than 72 hours ago. Records are stored in the archive for 30 days. It is recommended to regularly delete unnecessary materials to free up archive memory space.

The “Viewing Control” option package opens up even more interactive television options for users.

Conditions and cost of service provision

The cost of monthly subscription service when connecting a viewing control kit is 50 rubles. Set price For legal entities– 100 rub. per month.

Additionally, you have the opportunity to purchase any number of GB of memory. The operation is available in the “Service Management” menu by selecting the “File Quotas” item.

Rostelecom subscribers can find out how much it costs to connect additional GB of memory to store a large volume of archived recordings in the kit menu.

How to connect a package

Are you wondering how to activate the “Manage Viewing” service?
Rostelecom subscribers can activate a set of options independently or using the recommendations of the provider’s support specialists.

For self-connection necessary:

• In the menu of the set-top box, select “Service Management”;
• in the window that appears, select “ Additional services»;
• from the list of services, select “Viewing control”;
• Confirm the operation by double clicking the “Ok” button.

The activation status can be checked in the “Service Management” - “Connected” section. There you can also manage viewing.

Setting options

Rostelecom subscribers who have connected cable TV iptv.

You can use the options using the remote control (rewind, pause, play buttons) or through a playlist displayed on the screen by pressing the “Down” key during broadcasting.

The screen service is represented by the following functions: pause, rewind, watch from the beginning, record, program archive. Rewind broadcasts by selecting the desired channel. If the rewind function stops working, use the remote control to control the options.

In addition, if rewind or any other option in the kit does not work, there is always the opportunity to contact the operator’s support service for help.

Convenient division of channels depending on genre ensures a quick search for material of interest. Users have the option to add selected channels to the Favorite category for easy access at any time.

How to disable a package

Disabling an extended set of options is similar to the connection process.

To disable options in the “Service Management” section, select the “Additional Services” block, then “View Control”. Select the “Disable” function and confirm the action.

In addition, quick disabling of options is possible through the “Connected” menu item, reflecting the active status of operations.

If you have any difficulties with how to disable the service, please contact the Rostelecom customer support number.

A convenient modern service for managing your own TV program from Rostelecom is A New Look to interactive television. Schedule movie screenings or broadcasts of your favorite programs when it’s convenient for you. Record and save interesting and high-quality content, ensuring access to it at any time.

Progress does not stand still, especially if the issue concerns the information sphere. Every year, multimedia companies create something new in the field of entertainment to keep sophisticated TV viewers from getting bored. Let's find out how to set up interactive television provided by Rostelecom through a router and what other methods of connecting a set-top box exist. Instructions for setting up interactive television from Rostelecom will help you quickly figure out how to connect the equipment.

Methods for connecting the set-top box

There are three ways to connect a set-top box for interactive TV from Rostelecom:

• via router;
• using Wi-Fi;
• using PLC adapters.

Let's consider each of them separately.

Router

The most popular way is to set up Rostelecom interactive television through a router. There are no difficulties here. We pull the Internet cable from the set-top box to the router, connect the set-top box to the TV via an HDMI connector (in the case of old TVs, there will be a “tulip” instead of an HDMI cable). We plug the device into the outlet, and if everything is done correctly, then you will already enjoy the service.

This is the most reliable method, as it virtually eliminates failures if there are no problems with the Internet. A failure can occur in the only case if you catch your foot on a cable that you did not hide first.

With this type from Rostelecom, there is no need to change the router settings; the settings that are used to access the network are sufficient.

WiFi

For this method you will need an adapter wireless communication, which will need to be installed on the console. The method is convenient for those who do not want to run a wire across the entire apartment, especially if the TV is located far from the router. However, in this case, it is worth purchasing a high-quality router and adapter so that there are no malfunctions during the operation of the Rostelecom interactive television set-top box.

Important: be careful when purchasing Wi-Fi adapter for the console, they are not all compatible with each other.

PLC adapter

This method is the least common, but no less useful than those described above. The connection is made using special devices that allow you to make it at home local network through regular sockets. The advantage of this method is that the signal will be no worse than when connected directly. However, with large voltage drops there is a risk of damaging Rostelecom interactive television equipment.

Which console should I choose?

You can take a device that is leased by a company for the period of using their services (you can later buy it), or you can purchase it yourself. The most important thing is that the set-top box for interactive TV from Rostelecom has the following technical characteristics:

• supported video modes from 576i to 1080i, as well as most modern video codecs;
• supports both 4:3 and 16:9;
• has an HDMI connector.

The kit should include. Some devices also come with an HDMI cable.

Is it possible to do without equipment?

You can use the services of Rostelecom interactive TV without a set-top box. The “Fun” service offers viewing channels on a computer and laptop screen. This can also be done from a tablet and phone.

Setting up interactive TV

Setting up Rostelecom interactive television will not be difficult. The company providing the service has simplified the process as much as possible. First, switch your TV to video mode (AV). After the Rostelecom interactive television menu appears, take the remote control remote control from the console. Further all navigation will be carried out through it. Enter the login and password specified in the agreement. If everything is entered correctly, the device is connected correctly, there is an uninterrupted Internet connection at home, then the main menu with a selection of channels will appear on your TV screen. This completes the setup of interactive TV from Rostelecom.

Troubleshooting

The most common mistake: a message appears on the screen stating that there is no IP address. Below we will describe how to configure the router so that you can view Rostelecom interactive television:

• go to the router settings menu (via a computer, by entering the router’s IP address);
• select the PTV section;
• select the port to which the set-top box is connected and save the changes.

“No signal” information may also appear on the screen. If all wire connections are fine, the problem may be with the set-top box. They rarely last more than 4 years.

If not all channels are shown, call technical support to obtain necessary instructions to resume the operation of interactive TV from Rostelecom. Either you did not pay for the services, or there are failures on their part.

Is it worth connecting to interactive TV?

Considering the rich functionality of the service (large database of films, TimeShift function, use social networks), it’s definitely worth connecting to the service. However, you need to take into account the fact that everyone’s needs are different, and some people simply do not need such functions. Therefore, if you are still in doubt, we recommend using the “Fun” service (the ability to watch Rostelecom interactive television without a set-top box) and form your own opinion about the feasibility of the purchase.
To sum up, we can conclude that the package of services provided by the company is very interesting offer, significantly improving the quality of life. We hope you no longer have any questions about how to set up Rostelecom interactive TV.