How to unfasten handcuffs without the help of foreign objects. How to use handcuffs and how to open them without a key? Classification of lock opening methods

Anyone who watched action movies as a child remembers well how the tough guys deftly got out of handcuffs just at the very moment when the villain was about to press the button of an explosive device or cut the throat of the main beauty. But it's a sad outcome last weeks on the streets of Moscow proved to many that encountering a police baton, handcuffs or a paddy wagon in life does not seem such a fantastic event.

The editors of FURFUR don’t know for sure whether you are saving the world, participating in demonstrations, or just getting handcuffed due to your own stupidity, but they are certainly sure that such a store of knowledge should be in the arsenal of every man. In this material, the editors understand the structure of the most common domestic handcuffs and give several practical advice how to remove them, when at all possible.

The most common in Russia are two models of handcuffs: BRS-1 and BRS-2, respectively, with a lock of simple and complex shape. In most cases, you will have to deal with them.

It is also important to know that most handcuffs have a special clamp for adjusting the degree of tightening, which blocks the lock. In addition, there are handcuffs without chains with rigid bracelets, which leave the owner’s hands a minimum of freedom. It is almost impossible to open such handcuffs.

PREPARATION:

First of all, before you make any attempts, you need to ensure that your hands are in front of you. Even if you haven't done yoga or gymnastics, this stage doesn't seem too difficult. The second is to find a hacking tool. In practice, you can use any available means: paper clips, pins, watch buckles and even matches can be used. But it is advisable to find the thinnest and stiffest wire, otherwise the lock will not be able to be grasped or the tool will simply break. After this, you need to measure three to four millimeters from the end and bend the wire at a right angle. A flat plate is best suited, since it will deform less when in contact with the lock, because the force will go along the edge.

ROOKIE:

AMATEUR:

PROS:

For a movie character, it’s like two fingers: he took the wire, moved the lock for two seconds - and the handcuffs are open. So you look around and in your pockets for an ordinary paper clip. In the end, call for help from at least someone who can bring it.

To check whether this scheme works at all, we took a standard police special equipment BRS-2, put it on and went in search of paper clips. And we succeeded.

1. Get your bearings. The BRS-2 has a through lock, so the “key” can be inserted from any side. It opens by moving towards the far edge of the lock block.

2. Found a big thick paper clip? Its advantage is that it bends less and does not break during the opening process. Make one end like a key tongue, insert it and twist it in the right side. It may take 10-15 minutes before you fool the mechanism, but freedom is close.

3. Found a small thin paper clip? Great, you can make an almost duplicate of your original key from it. In the BRS-2 there is not one plate that fixes the teeth of the bracelet, but two - that is why the keys have a double tongue. Something similar needs to be built from a paper clip. Opening handcuffs with such a master key will not be difficult.

Handcuff Lock Lock

If it is activated (the lever is deeply recessed into the hole), then you first need to open the lock (one movement of the paper clip in the direction opposite to opening), and then take hold of the lock itself.

Handcuffs are quite practical and reliable! We all certainly know the purpose of this item! And, of course, there is a huge difference between how some scoundrel is cuffed in the next detective series and when handcuffs are put on you!

But for this to happen it is not necessary to be bad person committing any illegal acts! No, there are too many dangers in modern world(and it may not even be a defender of law and order who shackles you), and therefore even to an ordinary person It will be useful to know how to remove handcuffs without a key, especially if your life is in real danger! Our article will help you figure this out!

And first of all, you should understand the structure of handcuffs and the principle of their operation! For these purposes, the best thing for us is a video that shows everything perfectly! However, we immediately note that although the principle of all handcuffs is similar, depending on the model there may be different design features, making them difficult to open and tear (more on that below)!

As was said, the video above perfectly shows the principle of operation of handcuffs; for those for whom the video does not work or requires explanation, I will try to explain in my own words! From the video we see that instant locking of the handcuffs occurs due to the presence of teeth located on the movable part of the handcuffs (on the “bracelets”) and opposite teeth on the locking mechanism. It is these opposite teeth that lock the mechanism, which allows the “bracelets” of the handcuffs to move only forward! This is very convenient for quickly shackling a person.

It is also clearly visible that the handcuff key does not have any tricky grooves, but is made very simply. The shape of the key is very standard and has mainly a hole in the middle and one pressing element, which, moving clockwise, presses on a plate with opposite teeth, lowering it, which allows you to open the handcuffs (move the “bracelets” back)! To imitate a key (make a master key), it is best to take a hairpin! If you have a hairpin (or something similar) on hand, you can proceed in two ways:

1. Bend the pin in the form of a club and insert it into the key slot, move it clockwise (you just need to pick up the mechanism and lower the plate with teeth) and then carefully open the “bracelet” (you need to hold the pin while it presses on the plate with teeth ).

2. There is no need to bend anything, there is a slot on the side of the handcuffs into which you need to insert a pin, which will also help open the handcuffs! (watch the video)

The other one is also clearly visible important point! For more reliable protection the handcuffs are equipped with a special “pin” that moves the bottom plate of the locking mechanism to a position in which it becomes much more difficult to open them without a key (and absolutely impossible, if you don’t know some tricks, as I understand it).

In this position, it is no longer possible to open the handcuffs with the key simply by turning it to the right, because the “pin” entering the handcuffs blocks the opening mechanism, so that in order to open the handcuffs you will first have to put the pin in place. To do this, just turn the key to the left first to move the plate to its original position and thereby return the “pin” to initial position, and only then turn the key to the right to open the “bracelets”. We also see that when blocking with a “pin”, it will not be possible to squeeze out this same “pin” using a master key (by pressing on the bottom plate, turning the master key to the left), but you can try to resort to some trick:

3. To return the “pin” to its original position without a key, you need to hit the handcuffs well from the side in the area of ​​the “pin” (delivering a sharp, sensitive blow so that the “pin” literally flies into place. How this method works can be seen in the video below:

4. In addition, the handcuffs can be broken!!! Everything here seems to be simple, the main thing is to take it at a break, that is, the handcuffs are not on a rigid coupling (you can’t break them on a rigid one! Like some particularly strong models), you need to bend them in the coupling itself so that a support for the lever appears, then twist it with your hands trying to break it . You need to act exclusively on the break! If the model of handcuffs is suitable and you are not the worst hole or girl, everything should work out for you, and the handcuffs may break even faster than if you tried to open them with a hairpin! However, there is a “but” here too! This trick won't work if your hands are cuffed behind your back!

© SURVIVE.RU

Post Views: 16,314

Before reading a fascinating and no less useful story, it is imperative to decide on the following: if for some reason you fall into the hands of the police, then completely eradicate thoughts of how to open handcuffs without a key, because the forces of law and order are not to be trifled with, a priori! This article is aimed at overcoming the actions of not quite normal members of society who have handcuffed you and are planning to do something terrible. The information presented will benefit everyone without exception, even girls.

How to get rid of handcuffs?

Did the New Year holidays end in a funny way, if only because you found yourself handcuffed to a radiator? This problem can be solved quite quickly and efficiently if you know some tricks that explain how to open handcuffs without a key at home.

For example, for almost any actor this task will be extremely easy, because he knows that to get rid of the shackles he just needs to find a wire, move the handcuff lock for a few seconds - and that’s it! This means that it would be advisable to do the same, diving into the search for the same wire or an ordinary paper clip. It’s great if you can call someone for help, because another person can not only bring a tool to get rid of handcuffs, but also help solve the problem in practical terms.

It is important to note that this information was obtained as a result of an experiment discussed in the next chapter and, as it turned out, completely answering the question of how to open handcuffs without the BRS-2 key.

Experimental confirmation!

In the experiment, which was carried out to test the effectiveness of the scheme, the specialized police mechanism BRS-2 was used. So, it was put on a person’s hands, after which the experimenters went in search of paper clips. As it turned out during the operation, it is important not to miss three main points:

• Before you open handcuffs without a key with a paperclip, you should first get your bearings. For example, the BRS-2 has a pass-through lock, which allows you to insert the key from any side. And it opens by moving towards the far edge of the lock block.
• It should be noted that a massive paperclip will be an absolute advantage, because it bends less and has little chance of breaking. You should form one end of it like a key tongue, then insert it and twist it in the desired direction. Of course, you will need to try for 10-15 minutes, nevertheless, freedom is close, and in the end everything will work out!
• Only a thin paperclip was found? It’s great, because with its help you can create a real duplicate of the keys! BRS-2 has two plates that fix the teeth of the bracelet, which justifies the presence of a double tongue on the key.

Secrets of the lock blocker and some interesting nuances

Most common in the area Russian Federation are BRS-1 and BRS-2. In addition, their locks can be endowed with both simple and complex shapes. You need to know that most handcuffs have a specialized lock to control the degree of tightening, which serves as a lock blocker.

So, if the lock is activated (the lever is deep in the hole), first you need to open it, and then start working directly on the lock. The lock opens with one movement in the opposite direction. In addition, there are known models of handcuffs with rigid coupling of bracelets instead of chains. In such cases, the owner’s hands are given the bare minimum of freedom. But it is almost impossible to open these handcuffs, but with the maximum amount of effort, anything is possible in this world!

It is important to note that the process of solving the problem of how to open handcuffs without a key is divided into several stages, regardless of the chosen tool for eliminating the “shackles”. In addition, there is a classification of methods for getting rid of handcuffs depending on whether the owner is a beginner, an amateur, or maybe even a pro.

Preparatory stage

How to open handcuffs without the BR S key? Let's look at this:

1. First you need to ensure that your hands are in front. It should be noted that this stage is not as difficult as it seems at first glance, even if you have never done gymnastics or yoga.
2. The second operation, naturally, is to find a tool for picking the lock. Above we discussed in detail an experiment with a paper clip, which can easily be replaced with wire, a pin, or a watch tie. In addition, the most savvy people managed to open the lock of handcuffs even with ordinary matches. However, if possible, it would be advisable to find an extremely thin and rigid tool, which will help to fully grasp the lock and avoid breaking the tool at hand.
3. The third operation is to make a mark of three to four millimeters from the end, for example, of a wire, after which it is necessary to bend it at a right angle. The ideal material, of course, is platinum, because it has a minimal degree of deformation when interacting with the lock, because the force is directed along the edge.

Classification of lock opening methods

The easiest way to solve the problem of how to open handcuffs without a key, if you are new to this matter, are bracelets without an active latch, which, as a rule, is located on the plane of the handcuffs below the lock. As noted above, the exception of the lever being recessed into the hole indicates the inactivity of the latch. In addition, some models of handcuffs do not contain it at all.

In any case, the process diagram is as follows: the teeth of the moving part contact the grip, as a result of which the pawl falls and the handcuffs close. The key lifts it and the mechanism opens. This means that it is possible to fake the pawl manually, by moving the wire between the teeth and then grabbing it.

If there is a lock, it will not be so easy for beginners to disable it, but amateurs can do it this operation without much difficulty by turning the tool counterclockwise. It is important to note that extreme care must be taken when turning to prevent the lock from re-engaging. Only professionals in this matter will be able to open the BRS-2 handcuffs, because their lock has a particularly complex structure. The corresponding process is described above.

How to open handcuffs without a key? Actual problems

As a rule, in the process of getting rid of handcuffs, problems arise related to either the inability to find necessary tool, or by turning inward. It is important to note that the latter is not relevant for the BRS-2 model, since it is endowed with its through type.

In addition, there are BOS handcuffs, distinctive feature which serves (i.e. they do not have a chain between the bracelets). In this case, the owner’s hands become numb and very painful in a short period of time due to limited movement. So, even if you have a key in your hands, it is not always possible to open the lock. There is only one consolation: such handcuffs are not widely used in society, probably because of their extreme cruelty.

In the opening diagram of the BOS model, the blocker is marked with a red rectangle, and the directions of influence are marked with green arrows. The plate to be affected is shown in red short line. When it is in the place marked with a dotted line, the latch is considered open.

When summing up such an extraordinary story, it is important to recall a very standard, but such an effective truth: best method getting rid of handcuffs is to prevent them from being put on.

Sever79-8 14-05-2012 07:23

Good afternoon, Colleagues! I think that there are no potential criminals and repeat offenders in this thread... Therefore, I propose to share secrets - how to open various handcuffs without keys!?
For example, when I open the BR-S system handcuffs and the finger locks from the side of the shackle, any thin, strong object (paper clip, pin, wire) pushes out the ratchet... But what if they are locked? How do other handcuff systems open?

Amur73 14-05-2012 12:20

if without a stopper, then the BRS-2 and others with separated latches will not open very well.
and the rest, only if you can put a paperclip or other object in there.
br-s and ours have an enlarged gap on the side of the bow, so similar tricks are possible.

And in general, American ones in particular have minimal gaps and backlashes to make it so easy to get in and stuff something in.
Maybe, The best way“not with keys” to open, after all, make something like a key.

Sever79-8 14-05-2012 17:26

Thank you! about the "star" - a good move! But still? Is it possible to open through a keyhole?
In general, how, for example, can you remove the BR-S from the lock (without a key, of course...)?

Amur73 15-05-2012 11:23

no way to remove it.
The good thing about the latch is that there is a “hole” for activation, and you can only remove it with a key. This means that access to the latch is only through the keyhole.
And the thinner and smaller the hole, especially like in foreign ones, with a central key pin, the less the paperclip will fit in there.
Unfortunately, BOS and BCS are generally unrivaled in terms of size and ease of digging in the well, due to their design.

I have bicycles in the corridor, almost common, on high security Smith Wesson 104. I think that without a key you can only break it. The breaking force promised by Smith Wesson is 750 kg. our standard is 150.

v0vaN 23-05-2012 14:26

Some handcuffs can be broken in the area where the chain link is attached to the bracelet by inserting the fasteners for the chain of another bracelet into it and using the lever to break it. I did this once, it worked. You need strength, the ability to strengthen the action on the lever by pressing the handcuffs to some stationary surface and using your entire body weight, and the condition that the handcuffs are not worn behind your back.

Sever79-8 24-05-2012 09:58

Not a bad way either... I saw this! But they break, and they still hang on the wrists... I would like to open the MECHANISM ITSELF, without breaking...
If the handcuffs are fastened behind your back, then it is not a problem to move them forward under your feet! [not all models, but only with chain!]

Amur73 26-05-2012 17:42

:-) depends on the constitution of the body :-)

Susliks 29-05-2012 17:17

It’s not a problem to move them forward under your feet!

Amur73 01-06-2012 05:53

Amers have a wonderful "martin belt". chain for a belt, with a block at the end and large chain links. the block is threaded into the chain link, fixed on the belt, and the handcuffs are threaded into the block. So a man walks with his hands to his belt. And in front of you are your hands, you can sit and not wave them. often shown in movies. In general, amers have the largest arsenal of handcuffs and variety. A person must not cause harm to himself or others before the trial :-) with us, handcuffs and the guard’s baton-boot complement each other. An “organizational” method that complements the imperfection of the material base :-)

Dmitry_S 05-06-2012 12:58

I opened the BRS-2 with a paper clip through the key. a section of approximately 6 mm is bent at the paper clip, then you can act on both clamps. BUT! - all this was done with two hands and on the table. handcuffs correctly placed behind your back, even with a key, take about 15 minutes to open on your own. And “move forward under your feet” and other film tricks only work if the handcuffs are on the hands, below the joint.

Naturist 06-09-2013 18:26

He chewed the match until it was flexible, stuck it in the neck and pressed the latches. The “file” on the movable part of the handcuffs slips along the flexible match wet with saliva. Demonstrated by the detainee, fastened with one hand to the battery.

Leonid Ilyich 07-09-2013 15:31

quote: Originally posted by Sever79-8:
If the handcuffs are fastened behind your back, then it is not a problem to move them forward under your feet! [not all models, but only with chain!]

Blind fury. Have you tried this method or have you only seen it in movies?

an0805 08-09-2013 16:46

quote: Blind fury. Have you tried this method or have you only seen it in movies?

an0805 08-09-2013 16:49

quote: Originally posted by Amur73:

By the way, on one Korean model, especially for such clever people, there is a small asterisk that simply blocks this loophole.

Yuil M-11-1-K? They don't put it on anymore.

Norge 13-03-2014 16:13

In general, if you don’t bother too much, the same Smith and Wesson opens through the key hole with an ordinary hook-shaped master key.. For gourmets, you can try a paper clip, but I would flatten it first..

an0805 13-03-2014 17:16

quote: Originally posted by Norge:
In general, if you don’t bother too much, the same Smith and Wesson opens through the key hole with an ordinary hook-shaped master key.. For gourmets, you can try a paper clip, but I would flatten it first..