Grundfos multilift pumping unit. Electrical power W

New Sololift+ specially designed for the collection and disposal of wastewater in private homes. Sololift+ Suitable for bathrooms, showers, utility rooms and kitchens. It is intended for use where waste water cannot be discharged into the sewer by gravity. Bathroom and toilet where you need Installation Sololift+- It is not simple pumping station she gives you wide opportunities plans for your home. With it, you can easily arrange a bathroom, kitchen or utility room anywhere in the house - even where it was not possible before. Installation Sololift+ provides significant savings: There is no longer the need for costly large-diameter sewer pipe work, which used to be necessary when installing a new bathroom or other sanitary facility. GRUNDFOS offers you six models The lineup Sololift+ consists of 6 models, each of which is designed to perform its own tasks: wastewater from the toilet and / or one or more other domestic wastewater sources such as sinks, bidets, showers, dishwashers, kitchen sinks, washing machines and etc. > Sololift + CWC-3 - for wall-mounted toilet, washbasin and shower cabin > Sololift+ WC - for one toilet bowl > Sololift+ WC-1 - for toilet bowl and washbasin > Sololift+ WC-3 - for toilet bowl, washbasin, shower cabin and bidet > Sololift+ C -3 - for washing machine and kitchen sink> Sololift+ D-3 - for shower cabin and washbasin

DRAINAGE AND DISPOSAL OF HOUSEHOLD WASTE

In the life of the owners country houses often there are situations when it is necessary to urgently pump out clean or contaminated water from filled containers - for example, to get rid of the consequences of a spring flood that flooded the drainage well system, or to drain a pond or pool. It is most convenient to solve such problems with the help of small-sized submersible pumps. KR, KC and AP. These pumps, depending on the model, are designed for pumping domestic wastewater of varying degrees of pollution. They are compact and easy to operate and install, they can be used both for stationary work and moved from place to place. For automatic switching on and off depending on the water level, the pump can be equipped with a float switch. The built-in thermal switch protects the electric motor from an overheat. The pumps can be operated for many years without any maintenance. It is only necessary to clean them from the accumulated dirt inside. In pumps KP, KC, AP 12, AP 35, AP 50 for cleaning, it is possible to remove part of the base casing.

AUTOMATIC PUMPING OF POLLUTED WATER

If necessary, the forced removal of contaminated water from the kitchen, bath, washing machine, installation LIFTAWAY help you solve this problem. These devices are a compact collection tank in which water is pumped out using a pump. KP 150, KP 250 or A.P. 12. Its principle of operation is simple: first, the installation tank is filled with water, and after filling it, the float device turns on the pump, and the waste is pumped out into the local sewer. Device LIFTAWAY C designed for floor or wall mounting, and has five water connections. In contrast, the model LIFTAWAY B installed under the floor. Water supply can be carried out through three nozzles located on the side or from above through a cover mounted flush with the floor. The pump is not included in the installation and is supplied separately. PUMPING UNIT FOR PRESSURED SEWERAGE With the help of pressure sewerage systems, individual houses or the entire village are connected via pressure water conduits to the nearest central sewer network. Wastewater is not discharged by gravity, but under pressure without the risk of clogging pipelines. Therefore, pipelines of much smaller diameter can be used. This significantly reduces the cost of laying pipelines, and local treatment facilities are not required at all. For pressurized sewage, GRUNDFOS offers you ready-made, fully equipped pumping stations. Multilift and Liftstation. The pumping station is a storage tank made of corrosion-resistant polymer material, one or two submersible pump with pipelines and fittings. The station is fully automated, the control of work is carried out using a control cabinet. The pump size is selected depending on the required parameters (flow and pressure). Compact and fully sealed stations Multilift designed for installation in the basement of buildings. liftstation- pumping stations for outdoor installation, equipped mainly with pumps APG with cutting mechanism.

Our company offers a wide range of GRUNDFOS pumps for:

drainage, sewerage, pumping of polluted water and domestic sewage;

circulation hot water in heating and hot water supply systems;

circulation in air conditioning and artificial cooling systems;

increasing pressure, pumping various liquids into technological processes;

automatic pressure boosting installations;

pumping water from wells, irrigation, lowering the level of groundwater;

water supply of individual houses;

dosing (uniform supply of reagents) in industrial technological processes, systems water treatment, swimming pools;

taking water samples.

Almost all of our facilities are equipped with modern GRUNDFOS pumping systems for water supply and sewerage. With the help of a pressure sewer, individual houses or the entire village are connected to the nearest sewer network. Wastewater is not discharged by gravity, but under pressure without the risk of clogging pipelines. The use of smaller diameter pipelines significantly reduces costs. For pressurized sewage, we offer ready-made, fully equipped pumping stations such as Multilift and Liftstation. The pumping station is a storage tank made of polymer material, one or two submersible pumps, pipelines and fittings. The station is fully automated, the control of work is carried out using a control cabinet. The pump size is selected depending on the required parameters (flow and pressure). For pumping sewage, SEG sewage pumps equipped with a cutting mechanism can be used. For special operating conditions, the pumps can be supplied in an explosion-proof design. The VODNIK company also represents the entire range of GRUNDFOS submersible sewage pumps from 1.65 to 29 kW. Installation of such pumps can be carried out both in a stationary immersed position on an automatic coupling, in "dry" operation, and in a immersed portable version. GRUNDFOS wastewater pumps offer the highest efficiency throughout their entire operating life. They are economical and reliable thanks to the use of modern technologies. Advanced solutions, such as the ability to adjust the Smart Trim impeller clearance externally, reduce operating costs. GRUNDFOS pumps, both SuperVortex and channel pumps, have a non-clog impeller design, which ensures very long operation with liquids containing solids. This guarantees maximum resource and reduces maintenance costs. Inline pumps are designed for continuous operation under the most severe conditions. In addition to the industrial line, VODNIK presents pumping equipment for individual houses. GRUNDFOS household pumps provide uninterrupted, almost silent operation. The SQ series 3-inch borehole pumps are economical, reliable, and have high consumer quality due to their unique design features. They don't require additional devices protection against dry running and are able to work with significant fluctuations in the electrical network. The circulation pumps of the Alpha series are configured in such a way that their parameters are suitable for the heating systems of almost all private houses. The pump speed automatically changes depending on the needs of the heating system or hot water supply. Energy savings up to 60%! Drainage pumps series KP, AP made of stainless steel with a level sensor do not require any maintenance.

http://vodnik.usp.ru/catalog/32/34/68

Set up your bathroom wherever you want.

Sometimes it is difficult, and sometimes impossible, to equip a bathroom or bathroom where you want. The sewer riser is too far from the place where you plan to equip the bathroom, or installation is required below the sewer level (for example, when placing a shower or toilet in the basement), or it is not possible to lay sewer pipes large diameter ... But there is a way out, thanks to sewer grinder pumps, you can install plumbing wherever you want, without expensive general construction work.

Established in 1958 in France, SFA revolutionized the plumbing market with the launch of the macerator pump, which makes it possible to equip a bathroom or toilet in any part of a building, country house or apartment. Currently, there is a large range of pump grinders from different manufacturers on the Russian market. Depending on the model, these units grind waste and pump used wastewater up to 100 m horizontally or up to 10 m vertically, transporting them through a small diameter pipe to a remote sewer or septic tank. Now you can redevelop the premises without reference to the existing sewer riser.

Now let's look at what grinder pumps exist, and what tasks each model performs.

The largest group of chopper pumps are pumps connected directly to the toilet bowl. They are a small box that is mounted behind the pedestal of the toilet, and is almost invisible. Pumping occurs automatically when the toilet is flushed. Sewage enters the pump, crushed, after which they are transported under pressure to the sewer riser or septic pit. The entire pumping process takes place through a thin (diameter from 23 to 32 mm) pipe, which is hidden in the wall behind drywall, removed under suspended ceiling or poured into concrete floor screed. Depending on the model, either one toilet bowl or a toilet bowl, sink, bidet and shower cabin can be connected to the pumps of this group. The grinding mechanism of all pumps easily handles faeces and toilet paper, but not intended for more solid waste.

The SANIBEST® model of the aforementioned SFA company, due to its design, is intended for equipping sanitary facilities in public places. You can connect a toilet, shower, washbasin and even a washing machine or dishwasher to this model, which discharge water at very high temperatures. A powerful knife made according to the principle of a meat grinder copes even with hygiene products and contraception. In addition, the pump is equipped with a carbon filter that traps unpleasant odors.

To save space, you can use combined models, which are a regular toilet without a tank, in the pedestal of which a chopper pump is built. Pressing the pneumatic drain button turns on the suction and grinding of sewage. The motor drives the cutting mechanism, which grinds both feces and toilet paper equally well. It is possible to connect a sink.

Built-in macerator pump for wall-mounted toilet - perfect solution for small houses where everyone square meter on account. Since the pump is only 12 cm wide, it can be placed directly in a drywall partition.

Models of small size (296 * 162 * 144 mm) - specially designed for shower rooms. They do not have a toilet inlet, are very compact and can even be installed under the shower tray.

If you have a large family, then without washing and dishwasher hard to do. Manufacturers of sanitary pumps have provided for this. These pumps can be connected to: washbasin, bathtub, shower, bidet, dishwasher and washing machine, and kitchen sink. The maximum temperature of the water used is +70°. Such models allow you to install the sink anywhere. kitchen set, regardless of where the entrance to the sewer is located.

The largest and most powerful model is a sewer mini-station designed to service a cottage. It can be connected to both plumbing equipment and a dishwasher and washing machine. The mini-station works as a store, collecting and grinding all the sewage and waste that flows into it. After all the waste is processed, the pump sends it to the sewer. The model is equipped with two motors - they turn on alternately depending on the workload of the receiving tank. This allows you to significantly save energy (recycling time) and extend the life of the device. For greater convenience and safety of users, the developers have provided the ability to connect external sound and light alarms. In the event of a malfunction or clogging of the pump, an alarm will sound and the pump will stop working.

Now you just have to imagine where it is possible to equip comfortable and functional bathrooms in your house, and sewage chopper pumps and sanitary pumps will help make your dreams come true.

MULTILIFT pumping stations are designed for pumping wastewater that is below the level sewer system facilitating their discharge into the sewer. The unit is supplied with pumps with reservoirs and a control cabinet to facilitate installation and minimize operating costs.

Pumping units provide a simple solution to complex problems.

Pumping MULTILIFT installations there are different sizes from small (MSS) for single-family houses to large (MD1) designed for large buildings. All MULTILIFT installations are designed based on the principles of compactness, simplicity and inconspicuous installation.

Data pumping units range from small single source pumps to twin pump systems with reservoir capacities from 66 liters to 1,350 liters.

Application

The pumping unit collects waste water below the level of the sewer system and ensures that it is discharged into the sewer. They also exclude reverse flow in case high level water in the sewer system.
For single-family houses and summer cottages, use the MULTILIFT MSS or M pumping units. apartment buildings and commercial or public buildings of any kind always require a twin pump system: it is recommended to use MULTILIFT MD, MLD or MD1/MDV.

Features and Benefits

• Up to five motor sizes available for each tank size (M, MD, MLD);
• Finished units include check valves(MSS, M, MD, MLD);
• Less weight means more ease of operation and installation (MSS, M, MD, MLD);
• Easy to use microprocessor with preset values ​​for two different levels (MSS, M, MD);
• Two adjustable inlet heights in one system (MSS, M, MD);
• Reliable operation of the microprocessor provides control over the work;
• High quality pressure sensor, not in contact with sewage and a separate high water level alarm;
• Flexible inlets using connectors or fittings.
  The ability to order three main DN100 inlets with two additional inlets provides maximum flexibility
• A wide range of tank sizes for each type of application: 66 - 100 - 120 - 270 - 450 - 900 and 1350 liters;
• Rounded bottoms of the tanks, preventing sedimentation and lowering the level of residual wastewater;
• Sealed polyethylene material providing gas and odor impermeability; Non-synchronized Vortex impellers that pass solid inclusions up to 80 mm in size;
• Unique design of SE pumps for MD1/MDV (see SE pump data).

Specifications MSS/MLD, M/MD

Feed: up to 58 m 3 / h
Head: 19 m
Free passage: 65 - 70 mm

Specifications MD1/MDV

Feed: up to 220 m 3 / h
Head: 30 m
Free passage: 60 - 80 mm
Fluid temperature: 0 °C to +40 °C (short-term up to +60 °C)
Temperature environment: from 0 °C to +40 °C
Tank volume: up to 450 l (1 or 2 pcs.)