LOGICPIR Bathhouse is a high-tech, energy-efficient PU insulation with a rigid cellular structure, which, due to its technical characteristics, is 2/3 superior to similar thermal insulation materials. Thanks to the heat-saving properties of LOGICPIR Bathhouse (thermal conductivity coefficient 0.022 W/m*K) and the features of the insulation lining, the bathhouse quickly heats up, and the insulation layer is a reliable barrier between high and low temperatures, like a fur coat, retaining heat in the room. Modern bathhouse needs precisely such reliable and durable insulation.

Advantages

Saves space due to minimal thickness;

Reflects and retains heat as much as possible (0.022 W/m C);
Foil insulation does not require vapor barrier;
Environmentally safe at any temperature;

Retains characteristics throughout its service life (25 years).

Application area

Thermal insulation slabs LOGICPIR Bath are intended for use as insulation of walls and ceilings in steam rooms during the construction of baths and saunas.

Basic physical and mechanical characteristics

Logistics parameters

*Depending on the design, you can also use LOGICPIR slabs L Bathhouse in thicknesses of 30, 40 and 50 mm.

Mounting method

Thermal insulation boards LOGICPIR Bath are fastened with joints spaced through wooden slats using dowels and screws with a pitch of no more than 400 mm. After that, the joints of the plates are glued with aluminized tape 50 mm wide to obtain a sealed vapor-tight layer that reliably protects the entire structure from moisture. Using metal fasteners ( finishing nails or clamps) is attached to the sheathing wooden lining. When installing the finishing layer, an air gap of at least 20 mm is created between the insulation and the sheathing.

Storage

Thermal insulation boards LOGICPIR Bath should be stored in a dry indoors in a horizontal position in stacks at a distance of at least 1 m from heating devices.

It is allowed to store them under a canopy that protects them from precipitation and sun rays. It is also possible to store outdoors in special packaging that protects from external atmospheric influences for no more than 3 months.

The guaranteed shelf life of LOGICPIR Bath slabs is 2 years from the date of manufacture, subject to compliance with the rules of transportation and storage. After warranty period storage of LOGICPIR Bath slabs must be checked for compliance with the requirements of this organization standard and, if compliant, can be used for their intended purpose.

System advantages

• Does not require vapor barrier due to foil insulation;
• Does not support combustion and does not spread flame;
• Maintaining a continuous thermal circuit from the insulation;
• Saves space due to the minimal thickness of the insulation;

Product Description:

Thanks to the heat-saving properties and features of the insulation lining, the bathhouse quickly heats up, and the LOGICPIR Bathroom insulation layer is a reliable barrier between high and low temperatures, like a fur coat, retaining heat in the room. A modern bathhouse needs just such reliable and durable insulation.

Advantages:
1. New generation of insulation. Absolutely safe for health, has improved technical characteristics.
2. Minimum thickness Saving the maximum possible space.
3. Easy to install Thanks to light weight And minimum thickness Even 1 person can install the insulation.
4. Maximum heat retention. Record low thermal conductivity coefficient of 0.021 W/m*K.
5. Durability Retains characteristics throughout its service life without loss of performance characteristics.
6. Reduces heating costs Thanks to its high heat-saving properties, energy costs are reduced.
7. Not afraid of moisture Thanks to the structure, water absorption of LOGICPIR is no more than 1%.

Basic physical and mechanical characteristics:

Geometric dimensions*:

* by agreement with the consumer, it is possible to produce slabs of other sizes;
**slabs are produced with edges in the form of an “L” edge on 4 sides.

Manufacturing jobs:
In accordance with the “LOGICPIR Installation Instructions”.

Storage:
The slabs must be stored in a dry, closed room in a horizontal position in stacks at a distance of at least 1 m from heating devices. It is allowed to store PIR products under a canopy that protects them from precipitation and sunlight. It is allowed to store PIR products outdoors in special packaging that protects them from external atmospheric influences.

Transportation:
LOGICPIR slabs are transported in covered vehicles in accordance with the rules for the transportation of goods in force for this type of transport.

Packaging Details:
The boards are packaged in UV-stabilized film and delivered on pallets.

How to use the sauna all year round? The answer is to insulate the bathhouse. Choice building materials and foil insulation, video instructions and advice from friends make the process of building, insulating and finishing a bathhouse a pleasant and useful leisure time.

How and how to insulate the walls of a bathhouse from the inside?

While studying consumer problems when insulating a bathhouse, we more often came across the following five, which can be classified as misconceptions when using our insulation!

	1. Problem: “Insulation starts from the ceiling. It requires two layers of material.” Answer: the use of polyurethane (PIR) insulation will debunk this myth and save space. The thickness of the PIR board is 20-50 mm versus 100 and 200 mm of wool (multiply by 2).
2. Problem: “The insulation is covered with foil on top, which is secured with a special aluminum adhesive tape.” Answer: How did we solve this problem? LOGICPIR Bath insulation is already covered with foil and combines a heat and vapor barrier.
	3. Problem: “Organic insulation cannot be used in a steam room, because they are highly flammable.” Answer: PIR does not light up. Checked! When interacting with flame outer layer polyisocyanurate is charred (thanks to the unique PIR structure of TechnoNIKOL), and a porous carbon matrix is ​​formed on the surface, which protects the internal layers of the polymer and prevents the further spread of fire.
4. Problem: “Some insulation materials are suicidal and emit formaldehyde.” Answer: PIR is safe for health. Polyurethane (PIR) is used in medicine to create elements of the circulatory system and internal organs (heart ventricles, catheter), hip and shin prostheses, eye prostheses, etc.
	5. Problem: “Constant moisture leads to rot and will shorten the life of the insulation.” Answer: LOGICPIR Bath insulation retains its characteristics for 50 years, is not afraid of moisture, does not rot; not suitable for rodents and insects, fungus and mold.

We carefully studied the market needs for insulation materials, the experience of foreign colleagues and solutions on world markets. The result was the product LOGICPIR Banya, which is produced by a plant in Ryazan. The material has been tested in the laboratory, in real-life conditions and on-site.

Step-by-step instruction for installation
The price of insulation at retail ranges from....

Order thermal insulation material LOGICPIR Bathhouse is offered by the Arma-Stroy company. We guarantee strict adherence to the contract and delivery deadlines for products, which you can buy at the lowest price in the region.

LOGICPIR Bath is a material specially designed for thermal insulation of steam rooms of baths and saunas. Plates are used to insulate walls and ceilings.

In the LOGICPIR line, the Bath series is presented as a separate line. This is an environmentally friendly, ultra-thin, durable and reliable material made from polymer raw materials with the lowest thermal conductivity coefficient. The cellular structure and filling of “pockets” with inert gas made it possible to achieve an increase technical characteristics LOGICPIR Banya slabs are more than doubled compared to similar parameters of traditional materials.

Due to the high thermal insulation properties and the technology of laying insulation, the steam room quickly warms up. Insulation, like a fur coat, keeps the heat inside. Temperature Range use of material -65+110 C. A high-quality steam room requires just such reliable and durable insulation.

Advantages of LOGICPIR Bath insulation

• Ultra-thin slabs do not require much space for installation high-quality insulation, so the interior space does not lose useful area.
• The material does not burn. Under the influence of open fire, the upper layers of the slabs melt, blocking the access of the flame to the inner layers.
• The insulation retains heat as much as possible, the efficiency of its use is 2-2.5 times higher than when insulating a steam room with traditional materials.
• WITH outside the material is covered with foil, therefore it has high hygroscopicity.
• Modern polymers from which the insulation is made are safe for people and environment at any operating temperature. The material is chemically inert, resistant to fungus, mold and rot.
• Cells filled with gas do not absorb moisture, so the material can be considered waterproof.
• The manufacturer guarantees the preservation quality characteristics insulation for a period of over 25 years.

Installation features

LOGICPIR Bath insulation boards are supplied in various options thickness: 2-5 cm, in increments of one cm. They are attached to wooden sheathing walls and ceiling with dowels and screws. To ensure high-quality insulation, the joints are taped with metallized tape. When further covering the surface, it is recommended to leave an air gap of 2 cm or more between the sheathing and thermal insulation.