Bay window sills. Features of PVC bay windows. Features of bay window measurements
When architectural features In private housing construction, it is not possible to install standard flashings - radius ones are used. Radial flashings are used to protect:
- Basements of buildings.
- Walls under window openings.
- Horizontal plane under bay windows and round balconies.
Stages of work on the production of radius metal castings
Radius-type castings with curvatures in various planes around the circumference are manufactured. This allows radial window sills to fit perfectly into the style of buildings, which have radial-shaped façade structural elements.
The most practical and durable are metal ebbs. The corner drip for the base is installed first. the entire structure begins with this element. For installation, a special adhesive is used, then the ebbs are attached to the wall of the building or to mounting profile. Polyurethane sealant is used to protect against water penetration.
Made on special equipment, radius ebbs will become a decoration and reliable protection houses from precipitation. We will advise you on all questions of interest. And calculate the cost radius tides You can use .
Name of service | Width (mm). | Unit measured | Cost (in rubles). | |||||
---|---|---|---|---|---|---|---|---|
Material | Works** | General | ||||||
Up to 12 m.p. | More than 12 m.p. | Up to 12 m.p. | More than 12 m.p. | Up to 12 m.p. | More than 12 m.p. | |||
1. Installation of galvanized ebb | 110/130 | m.p. | 360 | 310 | 600 | 350 | 960 | 660 |
150/200 | m.p. | 470 | 400 | 600 | 350 | 1070 | 750 | |
210/250 | m.p. | 480 | 410 | 600 | 350 | 1080 | 760 | |
300 | m.p. | 530 | 460 | 600 | 350 | 1130 | 810 | |
2. Installation of polyester drip with plugs | 110/130 | m.p. | 380 | 320 | 600 | 350 | 980 | 670 |
150/210 | m.p. | 430 | 370 | 600 | 350 | 1030 | 720 | |
230/250 | m.p. | 530 | 460 | 600 | 350 | 1130 | 810 | |
320 | m.p. | 610 | 530 | 600 | 350 | 1210 | 880 | |
340/380 | m.p. | 820 | 700 | 600 | 350 | 1420 | 1050 | |
3. 1. Installation of aluminum ebb (Russia), bent, thickness 1 mm with plugs | 70/90 | m.p. | 1010 | 860 | 600 | 350 | 1610 | 1210 |
110/130 | m.p. | 1140 | 970 | 600 | 350 | 1740 | 1320 | |
150/165 | m.p. | 1240 | 1070 | 600 | 350 | 1840 | 1420 | |
180 | m.p. | 1340 | 1140 | 600 | 350 | 1940 | 1490 | |
210/240 | m.p. | 1450 | 1240 | 600 | 350 | 2050 | 1590 | |
250 | m.p. | 1450 | 1240 | 600 | 350 | 2050 | 1590 | |
300/350 | m.p. | 2270 | 1940 | 600 | 350 | 2870 | 2290 | |
400/550 | m.p. | 3380 | 2890 | 700 | 450 | 4080 | 3340 | |
600/700 | m.p. | 6760 | 5780 | 700 | 450 | 7460 | 6230 | |
3.2. Installation of extruded aluminum flashing (Gutmann) with plugs (white and dark bronze)* | 70 | m.p. | 1500 | 600 | 350 | 2100 | 1850 | |
90 | m.p. | 1725 | 600 | 350 | 2325 | 2075 | ||
110 | m.p. | 2250 | 600 | 350 | 2850 | 2600 | ||
180 | m.p. | 2850 | 600 | 350 | 3450 | 3200 | ||
210 | m.p. | 3675 | 600 | 350 | 4275 | 4025 | ||
280 | m.p. | 5250 | 600 | 350 | 5850 | 5600 | ||
320 | m.p. | 7125 | 600 | 350 | 7725 | 7475 | ||
360 | m.p. | 7875 | 600 | 350 | 8475 | 8225 | ||
3.3. Powder painting AL low tide on one side | m.p. | 350 | 300 | 350 | 300 | |||
4. Dismantling while preserving the old tide | m.p. | 770 | 610 | |||||
5. Dismantling without preserving the old tide | m.p. | 200 | 200 | |||||
6. Installation of flashings, customer’s material | m.p. | 880 | 650 | 880 | 650 |
Minimum cost of work - 3300 rubles
Installation of a bay window - 960 rubles per joint.
The cost of installation of drip tides total length more than 40 m.p. calculated individually.
*Extruded aluminum castings are supplied in multiples of 6 meters.
**The price indicated is for installation on foam.
Below are the costs for other installation methods.
Clause 2.1 is considered together with clause 2.2.
*This cost is added to the cost of installing foam drips
Price list for installation of visors.
Name of service | Width (mm). | Unit measured | Cost (in rubles). | |||||
---|---|---|---|---|---|---|---|---|
Material | work | General | ||||||
Up to 12 m.p. | More than 12 m.p. | Up to 12 m.p. | More than 12 m.p. | Up to 12 m.p. | More than 12 m.p.* | |||
1. Installing the canopy using climbers | 100 | m.p. | 290 | 240 | 1200 | 1100 | 1490 | 1340 |
200 | m.p. | 430 | 360 | 1200 | 1100 | 1630 | 1460 | |
300 | m.p. | 610 | 520 | 1200 | 1100 | 1810 | 1620 | |
400 | m.p. | 790 | 670 | 1200 | 1100 | 1990 | 1770 | |
500 | m.p. | 970 | 830 | 1200 | 1100 | 2170 | 1930 | |
600 | m.p. | 1120 | 950 | 1200 | 1100 | 2320 | 2050 | |
2. Dismantling with the help of climbers | m.p. | From 660 | From 660 | From 660 | From 660 | |||
3. Installation of the visor (Customer’s material) | m.p. | 2000 | 1800 | 2000 | 1800 | |||
4. Sealing the visor using climbers | M.p. | 1200 | 1100 | 1200 | 1100 | |||
5. Preparatory/final work of climbers | PC | 4000 | 4000 |
The minimum cost of work on installing a visor is 6,000 rubles
The cost of dismantling and installing canopies is added up.
Bay window joint - 890 rubles per joint.
Work on installation of canopies with a length greater than or equal to 20 sq.m. are considered individually.
Removal of the visor with preservation - from 1100 rubles per m.p.
Window sills and drains are an important component of any facade; they serve a practical and decorative function, reliably protecting the building structure from moisture. Traditionally, these elements were made from iron, but today there is a wide range of products on the market from iron. various materials. This allows you to buy a window sill that perfectly matches a certain type of facade. One of the most popular materials for building cladding is clinker brick. It attracts consumers with its aesthetic perfection, durability and ability to withstand any atmospheric phenomena. Elegant clinker window sills are the perfect complement to a perfect façade.
Production and features of window sill elements
The material from which window molding is made is high-quality plastic clay. It is carefully crushed, sifted, and then molded into blanks with a rather complex geometry. After this, the ebb elements are sent to the furnace, where they are fired at high temperature. After sintering clay particles, clinker is formed - a material equal in strength to stone. Window tintings created from it are not afraid of water, machine oil, gasoline, they can withstand very coldy and heat, and solar ultraviolet radiation has no effect on them.
One of the advantages of the element-by-element design of clinker window sills is the presence drainage channels. This allows water to be drained quickly and efficiently, and the absence of stagnant small puddles minimizes the possibility of fungus formation. The presence of finishing side elements reliably protects the wall from moisture and makes the window sill aesthetically perfect.
Variety of clinker window sills
Today you can buy window sills with a thickness of 30 and 35 mm, the width of the element is 105 mm, its length is 160 and 215 mm. It is not difficult to assemble a window sill yourself from the components; if you wish, you can purchase an assembled window sill of a certain length. It is fixed to the facade of the building using special mounting clips.
The aesthetic diversity of clinker window sills is impressive: wide choose colors, matte and glossy surfaces. Ebb tides can be used to decorate window openings, balconies, thresholds, decorative elements facade or fence. They look harmonious with facades made of clinker and ceramic bricks, giving the house a finished and elegant look.
IN last years bay windows are increasingly used in residential, commercial and administrative construction. The use of bay windows in architecture allows you to significantly diversify the external design of low-rise and multi-storey buildings, make their interior spaces more original. Let's talk about PVC glazing of bay windows, which requires a special approach from specialists and high level professionalism.
What are bay windows?
![](https://i2.wp.com/ecoplastika.ru/img/article/erker2.png)
Bay windows are glazed elements protruding from the general plane of the building facade. Such designs may be round, multi-faceted or rectangular shape. The external attractiveness of bay windows is complemented by important advantages for interior spaces: the rooms are of a much higher level natural light, which visually increases the space and makes the rooms more spacious. It is the excellent aesthetic and functional properties of bay windows that have made them so popular in modern construction, including in private.
Currently, glazing based on PVC profiles is actively used in bay windows. Such glazing is solid structure, which includes several sashes that completely repeat the shape of the facade. Considering that bay windows can have rather original curves, glazing this design can cause significant difficulties.
Features of glazing bay windows
![](https://i0.wp.com/ecoplastika.ru/img/article/erker3.png)
Bay window glazing is carried out strictly on an individual basis, for which specialists need to carry out a series of measurements. However, it is possible to take exact dimensions only after the bay window has been built, and errors in this matter may lead to the need to redo the entire structure. Therefore, if you want to make bay windows in a private house/cottage, then you should not order glazing in advance. Like any non-standard or country house.
The key difficulty in PVC manufacturing glazing for bay windows is that the frames are usually located at an angle to each other. Moreover, the angle can be within the range of 90°-180°, depending on the bend of the facade. This makes the process of joining frames very difficult: when non-standard angles Butt joints are quite difficult to ensure the tightness of the nodes. And also to eliminate the occurrence of “cold bridges” at the joints of bay window frames.
We will answer all your questions!