TYVEK (Tyvek) diffusion membrane, hydro-windproof insulation for roofs and facades. Buy TYVEK (Tyvek) wholesale and retail at manufacturer's price in Kolomna, Ozery, Lukhovitsy, Zaraysk, Istra, Stupino, Kashira, Voskresensk, Bronnitsy, Yegoryevsk, Moscow, Ryazan with delivery to the site.

TYVEK (Tyvek) diffusion membrane, hydro-windproof insulation is produced by the world famous DuPont concern and is a non-woven material based on endless fiber of low-density polyethylene (high density).

The unique Tyvek non-woven structure, developed by DuPont specialists, provides a combination of strength, protective properties and vapor permeability over the entire surface of the fabric.

The high vapor permeability of Tyvek materials allows moisture from the insulation and other structural elements to freely pass through it into the ventilated space, which prevents the process of condensation accumulation, wood destruction, and prevents a decrease in thermal insulation characteristics.

Benefits of using Tyvek films

• increases the service life of structural elements and thermal insulation;
• allows the construction of roof structures with one ventilation gap;
• improves the thermal insulation parameters and energy efficiency of the building;
• helps achieve the required temperature-humidity balance in the room;
• many years of experience in various countries and climatic conditions.

Range of Tyvek films

Waterproofing membrane Tyvek Soft

Tyvek® Soft is a single-layer waterproofing material with high vapor permeability that protects against precipitation and wind. Tyvek® Soft material can be laid directly on thermal insulation, as well as used with insulation elements in rafters. Tyvek® Soft is intended for waterproofing pitched roofs, including mansard type. This is a lightweight and durable material.

Tyvek waterproofing membrane is made of high strength polyethylene HPDE. It has a unique structure that provides a combination of strength, waterproofing and vapor permeability of the film over the entire surface.
The high vapor permeability of the Tyvek Soft breathable membrane ensures that excess moisture is removed from the roof structure to the outside, thereby keeping the rafters and sheathing dry.

Characteristics

Area of ​​application: roofing
Vapor permeability - 1375 g/m2 in 24 hours
Service life - >50** years
Thickness - 0.18 mm
Weight - 58 g/m2

Roll width—1500 mm
Roll length - 50/100 m
Roll weight - 4.5/9 kg

Waterproofing membrane Tyvek Solid

Diffusion membrane Tyvek Solid (Tayvek Solid)- this is a roofing film increased strength, which can be mounted directly over the insulation in roofs with one ventilation gap. Also, due to its strength, the membrane can be used in the construction of hinged ventilated facades and facades of wooden and brick private houses lined with siding.

Unlike Tyvek Soft - Solid, due to its increased strength, it can be installed in cold roof structures and on roofs with a double ventilation gap - the resulting wind load will not tear the roofing material.

The Tyvek Solid waterproofing membrane has a single-layer structure. It is made of high strength polyethylene HPDE. It has a unique structure that provides a combination of strength, waterproofing and vapor permeability of the film over the entire surface.

Characteristics

Area of ​​application - roofing/walls
Vapor permeability - 1300 g/m2 in 24 hours
Service life - >50** years
Thickness - 0.22 mm
Weight - 82 g/m2
Operating temperature - -40...+100°С
Roll width—1500 mm
Roll length - 50/100 m
Roll weight - 6/13 kg

** Based on test results carried out by the SP Swedish National Testing and Research Institute (Sweden), Tyvek is classified as a material with a service life of more than 50 years.

Membrane Tyvek® Solid Silver

Tyvek® Solid Silver membrane will help keep the house warm in winter and cool in summer, increase the level of comfort and reduce energy costs.
Tyvek® Solid Silver — is a vapor-permeable metal roofing membrane that optimizes the thermal efficiency of a building. It has a durable metallized surface with low dissipation coefficient and helps improve thermal efficiency and create a comfortable atmosphere in two ways: by consistently reflecting up to 85% of radiant heat in the summer and reducing heat loss due to convection in the winter.
This membrane has been used successfully in the UK since 2002. Tyvek® Solid Silver is suitable for both loose tile/slate roofs and pitched roofs from metal profile sheets. When used together with the Tyvek® Reflective vapor barrier and AirGuard® Reflective, significant energy savings are achieved - up to 15%.

What does "low dissipative power" mean?

The dissipative ability of a material is the ability of its surface to release energy by radiation. The lower the emissivity of a material, the higher its reflectivity, and the better suited it is for thermal insulation when combined with an air gap. With a low emissivity of just 0.15, Tyvek® Solid Silver is one of the most efficient products of its type.

Main advantages of DuPontTM Tyvek® Solid Silver membrane

• Low emissivity - 0.15

• Resistant to air and water penetration

• Durable metallized surface

• Vapor permeability

• Reflects up to 85% of radiant heat

• High corrosion resistance

• Excellent mechanical strength

• Effective rain protection

• Proven efficiency and reliability

Main properties of DuPontTM Tyvek® Solid Silver membrane

• Article: 2537M

• Composition: High density polyethylene and polypropylene with metallized surface

• Roll size: 1.5m x 50m

• Roll weight: 12 kg

• Weight per unit area: 150 g/m2

• UV resistance: 4 months

• Vapor permeability (Sd): 0.02 m

• Emissivity: 0.15

Waterproofing membrane Tyvek Supro Tape

The Tyvek® Supro vapor permeable membrane is a market leader, providing roof protection against wind and water, and improving the energy efficiency of the building.
Tyvek® Supro- durable waterproofing membrane, reinforced with laminated non-woven material based on polypropylene. This airtight and vapor permeable membrane is highly water resistant and can be used on all pitched roofs with and without supports.
When using Tyvek® Supro membrane there is no need to install any ceiling, roof or ridge ventilation, which saves time and money during the construction process. In addition to warm, hybrid and cold roof, this membrane can be used for various systems wooden laths, flat metal roofs, as well as for walls and floors.

Tyvek® Supro Plus membrane, in addition to the same advantages, is equipped with adhesive tape for sealing overlaps and is designed to create airtight roofing systems Tyvek®. Sealing all horizontal overlaps improves the thermal efficiency of the system by reducing air infiltration.

Resistant to high temperature and UV radiation

Tyvek® Supro waterproofing membranes with integrated joint tape able to withstand prolonged exposure to UV radiation and high temperatures, they are fully certified.

Key benefits of DuPontTM Tyvek® Supro with integrated tape

• High waterproofing performance.

• Air tightness.

• Vapor permeability.

• Provide superior air and moisture control in commercial and residential buildings.

• Long-term resistance to UV radiation and high temperatures.

Key properties of DuPontTM Tyvek® Supro / Supro with integrated tape

• Article: 2506B

• Composition: High density polyethylene and polypropylene

• Roll size: 1.5m x 50m

• Roll weight: 12 kg

• Weight per unit area: 148 g/m2

• UV resistance: 4 months

• Thickness of material / functional layer: 450 / 175 µm

• Vapor permeability (Sd): 0.03 m

** Based on test results carried out by the SP Swedish National Testing and Research Institute (Sweden), Tyvek is classified as a material with a service life of more than 50 years.

Windproof waterproofing membrane Tyvek Housewrap

Tyvek Housewrap- lightweight material white(60 g/m2), used for exterior walls. The effectiveness of the material lies in the fact that it excludes the penetration of water and air from the outside, while at the same time the porous structure allows moisture vapors to pass through it, that is, the material “breathes”.
Tyvek Housewrap ) the most common and reliable material for wind protection. Economical and reliable material for protecting facade structures.

Characteristics

Area of ​​application: walls
Vapor permeability - 1750 g/m2 in 24 hours
Service life - >50** years
Thickness - 0.19 mm
Weight - 61 g/m2
Operating temperature - -40...+100°С
Roll width—1500 (2800*) mm
Roll length - 50/100 m
Roll weight - 4.5/9 kg

*Available upon request
** Based on test results carried out by the SP Swedish National Testing and Research Institute (Sweden), Tyvek is classified as a material with a service life of more than 50 years.

Tyvek® FireCurb™ Houserap membrane

Tyvek® FireCurb™ Houserap Membrane is a flame retardant membrane for commercial and residential buildings using new patented technology.

The material was tested in the Russian laboratory of the Federal State Budgetary Institution VNIIPO EMERCOM of Russia according to the Russian GOST methodology “Construction materials. Test method for flammability under the influence of a small flame." As a result, it was concluded that DuPont™ Tyvek® FireCurb™ HouseWrap does not belong to the group of flammable materials.

DuPont™ Tyvek® FireCurb™ Houserap membranes are modern lightweight membranes that ensure limitation of the spread and self-extinguishing of fires. They are created using a halogen-free flame retardant compound. It reduces the likelihood of droplets and smoke forming and also minimizes the negative impact on the environment.

New security standards

Tyvek® FireCurbTM Houserap membranes provide all the benefits of water-resistant, vapor-permeable, breathable Tyvek® membranes, adding flame-restricting properties that can significantly improve a building's fire safety. This membrane helps slow down or prevent the spread of fire, gives more time to evacuate people in case of fire and improves performance fire classification wall elements. Suitable for buildings of all types: from country houses to multi-storey buildings. Tyvek® FireCurbTM Houserap membrane is a long-term protection solution you can rely on.

The main advantages of Tyvek® FireCurbTM Houserap membranes

• Self-extinguishing in case of fire

• No burning droplets and limited flame spread

• Smoke reduction

• Compliance with Euroclass B requirements (free-hanging installation) - virtually no other membranes provide such an advantage.

• Manufactured using a flame retardant compound that does not contain halogens to reduce negative impact on the environment

• Offers all the benefits of the Tyvek® range of membranes, plus flame retardant properties

• Low flammability, does not support the spread of fire

• Long-term investment protection

• Improved security both during and after installation

• CE marking

Main characteristics of DuPontTM Tyvek® FireCurb™ Houserap membranes

• Article: 2066B

• Roll size: 1.5 x 50 m

• Roll weight: 5.5 kg

• Composition: Flash-spun-bond HDPE material with flame retardant coating

• Fire response:

in accordance with GOST 30244-95: flammability group G1

according to EN 13501-1 (on mineral wool or freely suspended) B-s1,d0

• Temperature resistance: -40 °C to +100 °C

• Vapor permeability (Sd): 0.014 m

• Weight per unit area: 68 g/m2

• Functional layer thickness: 175 µm

• CE Marking: Yes

CE Certificate of Conformity: Yes (0799-CPD-128)

DuPont™ AirGuard® SD5 Vapor Barrier Membrane

DuPont™ AirGuard® SD5 reduces unregulated air leakage and allows for maximum reduction of heat loss due to convection in the roof, walls and ceilings.

A continuous vapor barrier layer of DuPont™ AirGuard® SD5 reduces air leakage by creating an effective vapor barrier that controls air movement and moisture infiltration around the building's occupancy.

Key benefits of DuPontTM AirGuard® SD5

This advanced material is specifically designed for use as a vapor barrier, but it also offers other important benefits:

• Reducing heat loss due to convection.

• Reduces the risk of condensation in insulation.

• Transparency for easy installation of insulation.

• Limited steam transmission.

• Airtight and waterproof.

• Excellent mechanical strength.

• Lightweight for easy installation.

Key properties of DuPontTM AirGuard® SD5

• Article: 8327AD

• Composition: DuPont™ Taypar® spunbond and ethylene-butyl acrylate copolymer

• Roll size: 1.5m x 50m

• Roll weight: 8.5 kg

• Weight per unit area: 108 g/m2

• Vapor permeability (Sd): 5 m

Installation of DuPontTM AirGuard® SD5

To prevent the risk of condensation, install DuPont™ AirGuard®SD5 membrane on warm side building, at the same time a Tyvek® diffusion membrane must be installed on the cold side of the building.

Effective air and vapor barrier- this is the main one internal protection building, allowing you to regulate the humidity and climate in the premises. DuPont™ AirGuard® vapor barrier layers are the optimal solution.

AirGuard® Reflective Vapor Barrier Membrane

DuPont™ AirGuard® Reflective is a vapor barrier for internal applications with low emissivity. When there is an air gap, this material helps make the indoor atmosphere more comfortable, since up to 95% of the heat is reflected back into the building.

4-layer especially durable vapor barrier with the highest vapor barrier ability, containing aluminum foil, which retains heat inside the house in winter. Relevant for everyone who cares about savings and comfort, as well as for rooms with high humidity, such as kitchens, bathrooms and swimming pools.

Key benefits of DuPontTM AirGuard® Reflective vapor barrier

• Significantly reduces the risk of condensation getting into the insulation

• Significantly reduces heat loss due to convection

• Robust due to excellent mechanical properties

• Fire reaction: Class E*

*When installed on mineral wool

Key properties of DuPontTM AirGuard® Reflective

• Composition: Polypropylene, polyethylene and aluminum foil

• Roll size: 1.5m x 50m

• Roll weight: 12 kg

• Weight per unit area: 149 g/m2

• Emissivity*: 0.05

• Vapor permeability: (Sd) 2000 m

*Low emissivity = high reflectivity = excellent thermal indicators, improving the efficiency of thermal insulation

Effective control of condensation

When installed continuously, sealing all joints and openings, DuPontTM AirGuard® Reflective vapor barrier helps effectively control condensation in all types of buildings, including high-humidity areas such as swimming pools or kitchens. We recommend using metallized Tyvek® tape to seal all joints, holes and cuts. This tape is also suitable for sealing connections to floors and ceilings.

Membrane installation

When used in small spaces, the metallized surface of the DuPontTM AirGuard® Reflective membrane reflects all the heat into the room, increasing the effectiveness of thermal insulation. As a result, the heat transfer resistance can be increased to 0.67 m²K/W. This in turn helps reduce heating costs by increasing the overall U-index of the wall structure. AirGuard® Reflective Membrane Installation

The DuPontTM AirGuard® Reflective membrane can be installed on either side, with the reflective surface of the membrane always facing the air gap. It is recommended to install the membrane with the reflective side inside the building, and then install a standard 25 mm sheathing on the membrane.

Today they are indispensable when carrying out construction work. One of the most popular and widespread are membrane ones, because they are able to protect the structure from moisture and wind, creating a comfortable microclimate inside the building. There are a huge variety on the market today construction solutions, however, Tyvek is a vapor barrier that is considered one of the most effective.

Description

If you want to choose a high-quality vapor barrier, then you should take a closer look at products under the Tyvek brand, which have a non-woven structure. These membranes contain and are manufactured using ultra-high-speed fiber formation technology. The elements are connected to each other under the influence of high temperatures.

This technology provides increased protective properties, guarantees vapor tightness and high strength. The characteristics make it possible to use Tyvek membranes to protect the exterior of houses, vapor barrier roofs, and for temporary covering during construction delays. To obtain the optimal effect, it is recommended to use the material in combination with fibrous thermal insulation and

Key Features

"Tyvek" is a vapor barrier that compares favorably with similar materials such as "Yutofol", "Izospan" or "Nicobar". Among the advantages should be highlighted:

• no need to provide a ventilation gap during installation;
• ability to remove moisture from thermal insulation;
• increased service life of wood structures;
• maintaining the required level of vapor barrier while maintaining vapor tightness.

This material has been able to perform its functions for half a century without loss of quality.

Specifications

Tyvek vapor barrier, the characteristics of which will be presented below, is offered for sale in several varieties, each of which has its own characteristics. You can find seven membranes that are produced by the manufacturer under the following designations:

1. Soft.
2. Supro.
3. Solid.
4. Solid Silver.
5. Housewrap.
6. AirGuard SD5.
7. AirGuard Reflective.

The most important characteristic in this case is vapor permeability. For the first two solutions this parameter is 0.02 Sd (m). The third and fourth options have a vapor permeability of 0.03 Sd (m). The fifth, sixth and seventh membrane options have a vapor permeability of less than 0.02; 5-10 and 2000 Sd (m), respectively.

The number of layers may differ, for example, in the first, third, fourth and fifth options there is only one layer; in the second and sixth there are two layers. But only last option The membrane is distinguished by the presence of 4 layers. All of the listed solutions are windproof, but the operating temperature varies from -40 to +100 in the 1st and 5th options, while in the last two the range is somewhat smaller and ranges from -40 to +80 °C.

The last two membranes are intended for installation on the wall and roof, while the first membrane can be used exclusively for the roof, but the fifth can be used for walls. Each of the solutions presented by the manufacturer can be used for more than 50 years.

"Tyvek" is a vapor barrier that must be installed using a certain technology. To do this, the roll should be rolled out across or along the rafters, fastened with staples, the distance between which should be 30 to 50 cm. Then the craftsman should begin installing the counter-lattice, which will provide a gap between the finish and the insulation layer.

Areas of fastenings and abutments, as well as overlap areas should be treated insulating tape on acrylic or butyl base. This approach can also be used when the fabric is torn. "Tyvek" is a vapor barrier that must be installed with the lettering inside. If you have to carry out work in cold attic rooms that are provided with winter heating, then a vapor barrier will not be required. In this case, the membrane should be placed under the ceiling of the upper floor. Wrapping technology external walls will remain the same as in the case of the roof.

More about Airguard SD5 vapor barrier

Tyvek Airguard SD5 vapor barrier has an area of ​​75 m2 per roll. This building material is used for vapor barrier of frame houses and thermally insulated pitched roofs. The material retains its properties while maintaining the required level of vapor barrier.

Steam transmission is controlled, which is ensured by a high-tech layer applied to the reinforcing base. If such a vapor barrier for a Tyvek roof is used in conjunction with insulation, this will make it possible to achieve a temperature and humidity balance that is close in characteristics to a wooden house.

Among the advantages of this material, one should highlight the elimination of the greenhouse effect, maintaining a comfortable temperature inside the building, protecting the building from destruction, durability, strength and environmental safety.

Additional information about the technical characteristics of the Airguard SD5

The Tyvek roof vapor barrier described above is 100% polyolefin, the thickness of which is 430 microns. One roll weighs 14 kg and its dimensions are 50 x 1.5 m. The breaking load along and across is 200 and 170 N/5 cm, respectively. Vapor permeability in 24 hours is equivalent to 0 g/m 3, while water resistance is equal to 3 m of water. Art.

Analogs of Tyvek vapor barrier

"Tyvek" is a vapor barrier, analogues of which are presented on the market today in a wide range. Among others, Izospan should be highlighted, which is used as a vapor barrier to protect and insulate building structures for various purposes.

The areas of use of this material are:

• frame walls;
• insulated sloping roofs;
• interfloor ceilings;
• basement floors.

This material is able to withstand exposure to sunlight for 4 months, it is based on polypropylene, and the vapor permeability resistance is 7 m 2 / h * Pa / mg. Another analogue is vapor barrier film"Yutafol", which is a micro-perforated membrane that prevents the penetration of moisture into the premises, while it does not prevent the evaporation of condensate. The membrane is sold in rolls and is offered for sale in several varieties: “Yutafol”, “Special” and “D Standard”.

Conclusion

If you implement a vapor barrier wooden house By using a Tyvek membrane, you can reap many benefits. For example, eliminate the greenhouse effect, create indoor optimal microclimate, improve the energy efficiency of your home and increase performance characteristics designs.

• no matter INSTALLATION WORK ROOFING WINDOWS FACADES Finishing Waterproofing Delta Tyvek Isospan Juta Eurovent Vapor barrier Delta Tyvek Isospan Juta Eurovent Adhesive tapes Thermal insulation URSA PAROC TechnoNIKOL ROCKWOOL Dormer windows VELUX GZR 3050 Top handle GZR 3050B Bottom handle GZR 3061 Top handle GZR 3061b Bottom handle GLR 3073IS Top handle GLR 3073BIS Bottom handle GLR 3073BTIS 2 Handles GLP 0073BIS Bottom handle Flashing for profiled roofing VELUX EZR 0000 Flashing for flat roofing roofs VELUX ESR 0000 Hydro and thermal insulation VELUX BDX Waterproofing VELUX BFX Vapor barrier VELUX BBX GLL 1061 Top handle GLL 1061B Bottom handle GGL 3070 GGU 0070 GGU 0068 GGL 3086 GGU 0086 GPL 3070 GPU 0070 Flashing for profiled roofing VELUX EDW 2000 Flashing for flat roofing VELUX EDS 2000 GGL 3068 Window accessories Curtains , blinds, roller shutters, awnings Light tunnel VELUX skylights Window with smoke exhaust system Roof exits VELUX Window-Balcony Old VELUX models Mid-turn windows Combined opening SUPER-warm Roof exits Window-balcony and terrace Everything for installation Mosquito nets, ZIL FAKRO FTS U2 standart FTS-V U4 standart, double-glazed window FTP-V U3 PROFI FTP-V P2 PROFI triplex FTP-V U3 Z-Wave Electrical control FTP-V U4 PROFI, double-glazed window FTP-V U5 Thermo LUX, double-glazed window FPP-V U3 preSelect PTP U3 PROFI PVC PTP-V U3 PROFI PVC with ventilation valve ESV flashings for flat roofs EZV flashings for profiled roofs XDK hydro+steam+thermal insulation XDP external insulated waterproofing flashing XDS internal vapor barrier flashing XWT thermal insulation belt Service Windows Roofing Accessories For Ridge / Ridge For Eaves For Junctions Bituminous shingles CertainTeed KATEPAL KL JAZZY ROCKY KATRILLI FOXY Com accessories TEGOLA NORDLAND SUPER COMPONENTS RUFLEX SHINGLAS SHINGLAS SINGLE-LAYER TILES SHINGLAS Finnish Sonata SHINGLAS Finnish Chord SHINGLAS Continent SHINGLAS Atlantic SHINGLAS Western SHINGLAS Jazz SHINGLAS Country SHINGLAS Ranch SHINGLAS Foxtrot SHINGLAS Samba SHINGLAS Rumba SHINGLAS Modern SHINGLAS Tango SHINGLAS Square dance SHINGLAS Flamenco SHINGLAS Salsa SHINGLAS Bolero SHINGLAS Chord Accessories ICOPAL Accessories IcoPal GAF Metal tiles RUUKKI Grand Line Metal Profile Composite tile Metrotile Lindab DECRA Gerard Luxard Tilcor Feroof Cement-sand tile BRAAS Frankfurt Taunus Amber Adria Reviva Teviva Baltic Tile Video on DSP Ceramic tiles BRAAS KORAMIC Windows (PVC) REHAU Euro Blitz New Delight Grazio Brillant Intelio Ventilation Penetrations For Metal Tiles For Bituminous shingles For Piece tiles For Seam roofing For Composite tiles SOLAR passage element Vent. pipes ROSS-base deflector Pipes for vent risers ALIPAI ventilation pipes Deflectors Roof Vent Hatches Funnels Seals Seals for antenna and heating boiler outlets Rubber seals for metal roofs Seals for soft roofs. Email Fans P-fans S-ventilation outlets S-fans special fans Fireplace fan Roof safety elements Snow guards Bridges Transitional Fences COPPER stairs EBK Fiber cement siding Cedral Cedral Click Gutters Metal AQUASYSTEM PURAL 125/90mm. PURAL MATT 125/90mm. PURAL 150/100mm GALECO 124/90mm. 152/90mm. PVC gutters GALECO GALECO 124/80 mm GALECO 152/100/80 mm RuPlast 125/90mm white, brown 120/90mm brown, red 120/90mm green Gamrat GAMRAT 125/110/90 mm, dark brown (RAL8019) GAMRAT 125/110/ 90 mm, white (RAL9010) Cornice weight (Soffits) Al. Soffits PVC Soffits Sayga Mitten Metal. Soffits Aquasystem metal soffit with central perforation L=2.4 m.p. Aquasystem metal soffit with full perforation L=2.4 m.p. Aquasystem metal soffit without perforation L=2.4 m.p. Aquasystem G-bar L=2m. Aquasystem F-plank L=2m Aquasystem J-bevel 150mm. L=2m. Aquasystem J-chamfer 200mm. L=2m. Aquasystem J-chamfer 250mm. L=2m Aquasystem wind strip (L-profile) 150mm. L=2m. Aquasystem wind bar (L-profile) 200mm. L=2m. Aquasystem wind bar (L-profile) 250mm. L=2m. Aquasystem Finish bar L=2m. Aquasystem Angular strip (external) Aquasystem Angular strip (internal) Copper Attic stairs VELTA FAKRO Waterproofing protection Cut-off waterproofing Siding Mitten Terrace board ECODEK CM Decking Basement siding Dock Drainage systems
• no matter DORKEN DU PONT JUTA KLØBER Izospan Schiedel SK TUOTE OY FAKRO ROTO VELUX BRAAS Creaton Erlus KORAMIC Sea Wave SERENI RUUKKI GrandLine MetalProfile CertainTeed Docke GAF ICOPAL KATEPAL Owens Corning RUFLEX TEGOLA TechnoNIKOL DECRA GERARD Lindab METROTILE Tilkor A QUASYSTEM GALECO GAMRAT RUPLAST ISOROC PAROC ROCKWOOL URSA Mitten Inc. GENTEK BORGE ECODEK CM Decking White Hills ROSER Eternit MAGE Ytong Eurovent Baltic Tile
• no matter In stock

We offer a wide range of Tyvek films for vapor and waterproofing

at a great price!

To date modern construction It is impossible to imagine without waterproofing materials. One of the most popular is vapor barrier Tyvek film. It does an excellent job of protecting walls and roofs from the negative effects of factors environment(dust, moisture, condensation). Tyvek allows you to maintain optimal level indoor humidity.

Areas of application

Roll film is widely used for the construction of residential and industrial premises. IN Lately it began to be often used in printing and for the manufacture of clothing. In construction, it is most often used for vapor barrier of pitched roofs and walls of small frame houses. Tyvek workwear is resistant to aggressive chemical substances such as acids and alkalis. It also protects the skin well from fine dust. In printing, this material is most often used to make advertising banners and book covers.

Can't decide on the material?

Our managers will help you choose best option for your tasks.

Just contact us

by phone, mail or chat with an online consultant.

Vapor barrier and waterproofing Tyvek

When building any house, Special attention paid to the foundation and roof. The first rain or snow will show owners whether the weather protection methods were chosen correctly. In order for the roof to withstand all weather changes without complaints, it is necessary to use special vapor and waterproofing films during construction.

Tyvek company specializes in the manufacture of high-tech membrane material, which allows you to maintain the necessary temperature regime inside the building. Tyvek Vapor Barrier is a modern insulating material that will help avoid greenhouse effect, will maintain the necessary microclimate in the room.

Vapor barrier and waterproofing Tyvek comes in several types:

• Polypropylene, which protects from sunlight. Tyvek membrane very durable. When using it, no droplets are formed on the roof.
• Polyethylene. This film is most often used in the construction of saunas, baths, i.e. in those rooms where there is the most humidity.
• A non-woven membrane can protect the roofs of houses from various precipitation and wind.

You can buy Tyvek vapor barrier in Moscow in the Neotrade online store, which offers a wide range of insulating materials. The price of Tyvek will not hit your family budget hard.
Hydro- and vapor barrier materials from the Neotrade company are in great demand among construction companies. Tyvek waterproofing materials are used for pitched roofs, facades and wall structures. Possessing many good qualities, one cannot fail to mention the shortcomings. Vapor barrier membranes cannot be used in places where there are sources of open fire.
Tyvek is a manufacturer of insulating materials that can also be used as temporary protective covering in cases where construction is delayed or delayed.

Tyvek is one of the few building materials, which allows you to maintain the necessary vapor barrier and create a good indoor microclimate. The main components of this high-tech material are propylene or polyethylene. In terms of its beneficial qualities, it has no analogues. Tyvek ideally combines the properties of fabric, paper and film. Despite its thinness and lightness, this material has increased resistance to physical (tears, punctures, ultraviolet rays) and chemical influences(acids, alkalis).

What types of Tyvek vapor and waterproofing are there?

Modern construction market offers the buyer 2 main types of Tyvek:

1. Polypropylene. It is highly durable and protects against the adverse effects of ultraviolet rays.
2. Polyethylene. It is usually used in the construction of premises with high levels of humidity (baths, saunas, swimming pools).

Benefits of using Tyvek vapor barrier

The waterproof membrane has a number of advantages, the main of which are:

• Vapor permeability. Provides steam escape from buildings.
• Waterproof. Prevents moisture from entering the main structural elements of the house.
• Large margin of safety. Temperature changes do not affect its quality in any way.
• Can increase service life building structure.
• Possibility of creating structures with one ventilation gap.
• Relatively light weight.
• Environmentally friendly material that meets all requirements and quality standards.
• Ease and convenience of installation.
• Economical. The breathability of the membrane allows you to save on heat.

Features of material installation

Vapor barrier film tyvek is installed using similar methods with other rolls thermal insulation materials. It is laid overlapping the thermal insulation and adjacent to the building structure. Tyvek waterproofing does not require an additional ventilation gap. It should be noted that there are dotted lines on the material that allow you to correct styling. Fastening to the structure is carried out using glue or nails.

Modern tyvek vapor barrier can be used in wooden structures. It should be noted that the price per m2 of Tyvek is much lower than that of chemical compounds that are used to process wood.