Roofing systems TechnoNIKOL. The use of wedge-shaped thermal insulation TechnoNIKOL is approved by the certification body in the field of fire safety for use in roofing systems with combined thermal insulation. Mastics and primers

TM STN is a product of the TechnoNIKOL Trading Network Company.

We work with a large number of clients every day, listen to their opinions, wishes and always strive to satisfy their needs. A thorough analysis of the preferences of our customers and partners showed that the market building materials, as in any industry, there is a need for quality products for attractive prices. That is why in 2015 the company began to develop the direction of its own brand – STN. Customers can buy products from an already well-known brand in Moscow and other Russian cities at a relatively low cost.

Based on the most common customer requests, we have identified the main categories of popular building materials. On this moment mastics, primers, protective films and membranes. But we are not going to stop there. Own trade marks should not only reduce the material costs of our customers, but also become a worthy product on the market.

Saving

While maintaining the high quality of our products, we keep our prices down. Our customers can afford construction and renovation without breaking the bank or budget.

Quality

We pay close attention to the quality of our products and carefully control production at all stages. All samples are checked for compliance with GOST requirements. STN brand products have all the necessary certificates and meet international requirements.

Optimal choice

We are chosen due to our loyal pricing policy and guaranteed quality products. Products of our brand have been and are repeatedly used at many industrial and private construction sites.

You can send us your wishes/comments on products by email: .

Mastics and primers:

Bitumen primer STN Professional

Primer STN Professional is a solution of bitumen and organic solvents. It is used for the preparation of cement-sand and reinforced concrete foundations. The primer dries completely in 12 hours and has good coverage and is easy to apply to the surface.

Bitumen mastic STN Professional

The mastic consists of a mixture of petroleum bitumen with the addition of a solvent and special technological fillers. She doesn't demand preliminary preparation(heating) and is immediately ready for use. STN Professional mastic is used when performing waterproofing works on wood, metal, reinforced concrete and cement-sand bases. The mixture is easy to apply, dries quickly and is resistant to temperature changes and humidity.

Bitumen-polymer mastic STN Professional

This mastic consists of bitumen binder, artificial rubber, solvent, and special fillers. It is intended for waterproofing foundations and installing mastic roofs. The composition is also used for repairing waterproofing coatings. Elastic and heat-resistant bitumen-polymer mastic is well applied to substrates and has good adhesion(material adhesion to the surface) to cement-sand surfaces.

TECHNONICOL Corporation in Russia produces and supplies a wide range of sound and thermal insulation, mastics, roofing and waterproofing.

Our assortment includes dozens of items and allows you to install roofs and waterproof the High Quality. Moreover, all products meet the highest requirements and have the necessary certificates.

Roll materials "TECHNONICOL"

As part of this area, we produce and supply bitumen and bitumen-polymer products for sound insulation of buildings and waterproofing of buildings and structures

For thermal insulation of buildings

The company offers stone wool, extruded polystyrene foam, fire protection systems and much more. All products are manufactured at modern equipment using latest technologies and matches everything existing standards quality.

For installation of a pitched roof

As part of this area, the TechnoNIKOL Trading Network company provides roofing and waterproofing products with a guarantee of high reliability and durability. The company's product range includes bitumen and composite tiles in a wide range of colors.

Mastics, primers, bitumens

Our company produces mastics used in solutions various issues repair. In addition, they are used to install and waterproof the roof. Among them are cold and hot mastics, bitumen and bitumen emulsions, all kinds of compositions for road construction, for installation and waterproofing of roofs, primers for priming bases.

Accessories

The company produces and supplies a huge range of components for flat roofing - roof aerators, drainage funnels and accessories, as well as various types of professional equipment for roofing work.

For facade cladding

New direction - facade tiles for cladding, renovation and decorative design facade, its architectural elements(gable, entry group), fences and fences. The product is characterized by increased tightness, resistance to corrosion and temperature fluctuations, and also has exceptional durability of material and color. In addition, the price per m2 facade tiles is relatively low.

The Technonikol company is a leader in Russian market manufacturers roofing materials. This company began its history in 1994 with a small production of roofing felt, and now its network has spread to many cities in Russia and has about 40 factories. Soft roofing "TechnoNIKOL" is used for private construction in industrial scale and is of high quality and affordable price.

Features of TechnoNIKOL roofing materials

Soft roofing material is a relatively new product on the market. construction market, but has already become widely used. The Technonikol company produces a type that is perfectly adapted to the weather conditions of our country.

• PVC membrane for roofing "TechnoNIKOL"
• Flexible tiles
• Roll and mastic roofing

The TechnoNIKOL overlay roofing has certain features that distinguish it favorably from analogues presented on the construction market:

• The basis of such roofing material is fiberglass, coated on both sides with bitumen, to which special substances have been added that increase its quality characteristics. On top of the material there is a basalt topping, which can be of different shades, due to which finished roof takes on an interesting color.
• The inner side is treated with a bitumen mass with polymers, which has the ability to adhere to the surface using surfacing.
• The outer layer is protected by a silicone-based film.

Soft roofing has some properties that allow it to be used to cover any roof structure:

1. High resistance to mechanical stress.
2. Excellent waterproofing of the entire roof and its components.
3. The ability to bring anything to life design solution, thanks to the variety of assortments.
4. Soundproofing qualities.
5. Resistant to temperature changes and frost.

Most visible distinctive features soft roof"TechnoNIKOL" from materials from other manufacturers can be called the absence of the need to use special tools during installation, as well as the ability to create almost any shape with its help. These include dome and bulbous roof structures.

Variety of types of soft roofing "TechnoNIKOL"

When choosing flexible material You can choose among the company’s products a material that is suitable in terms of quality and price among the variety produced. According to the price category, roll roofing can be divided into the following types:

• Economy, characterized by simplicity and speed of installation.
• Standard is a material that can be used for installation on any roof structure.
• Business - high-class materials with a “breathable” coating.
• Premium - materials of the highest quality with the longest service life.

The most famous roll roofing materials from TechnoNIKOL are:

Important! Attaching the TechnoNIKOL coating to the base and at the junction points is done by heating inside roll and gluing the sheet to the roof surface.

In addition to the listed roofing materials, in addition to the general coating kit, you can purchase an aerator produced by this company. Installing such devices will help to promptly remove excess moisture that often accumulates under the roofing pie and prevent swelling of the material.

Soft tiles "TechnoNIKOL"

Particular attention must be paid to flexible tiles domestic production from the TechnoNIKOL company. The brand of these products is called “Shinglas” and has been produced since 2003. The beginning of production was marked by the formation of a new TechnoNIKOL plant in Lithuania. The products immediately stood out for their high quality. This was achieved thanks to the purchase of new capacities and the company’s ongoing scientific research. Another flexible tiles not in the manufacturer's assortment.

The production of flexible tiles is based on fiberglass. The mineral coating on the surface of the material is additionally colored by ceramization, that is, when heated to 700 degrees. A rabbit treated in this way will not lose its decorative properties during operation.

Flat roof solutions

Due to the fact that the company produces a wide range of roofing and waterproofing materials, you can choose a suitable solution for the device flat roof under any conditions. The Technonikol flat roofing system can be installed on a rigid or non-rigid base.

The first option includes covering the roofs of residential and public buildings. The manufacturing company offers solutions for options with an unheated attic and those roofs that relate to combined type. If the attic is not heated, then the TechnoNIKOL Pro Site technology is used, which involves the installation of two layers of Technoelast - top and lining. Before installation cement strainer processed with TechnoNIKOL primer.

Important! A layer of expanded clay gravel can create an optimal slope.

If there is a heated room under the roof, the technology for laying a soft roof changes slightly - under expanded clay gravel a layer of thermal insulation is arranged from TechnoNIKOL insulation based on extruded polystyrene foam, and vapor barrier layer made of polymer type material on a bitumen basis Bipol. If you additionally install a roof aerator on such a structure, you can increase the effectiveness of the thermal insulation layer several times by preventing it from getting wet.

For industrial buildings, a system on a non-rigid base is used. It can be done with special roll materials, or a separate technology can be applied that will help obtain high quality finished coating. Also in this case, special roof waterproofing “TechnoNIKOL” is used.

Conclusion

The range of Technonikol products is amazingly diverse. With the help of such roofing materials, you can design a roof of any shape and functional characteristics and at the same time choose the option that suits the cost.

Sergey Novozhilov - roofing materials expert with 9 years of experience practical work in the field of engineering solutions in construction.

TECHNONICOL roof ventilation is

1. Favorable ratio of optimal technical solution, prices and high quality workmanship;

2. Reliable design and comfortable operation;

3. Aesthetics and visual appeal;

4. Availability and durability.

TU 4863-002-737011851-05

Product Description:

TECHNONICOL roof ventilation is manufactured under pressure using the casting method. Material – HDPE (low pressure polypropylene), enriched with substances that affect performance characteristics ventilation, increasing resistance to exposure sun rays, heat resistance and frost resistance.

For production we use plastic that is resistant to mechanical damage and aggressive environmental influences.

Main physical and mechanical characteristics:

Based on functionality ventilation systems TECHNONICOL are divided into accessories, under-roof and internal ventilation.

Certificates

The Stroymet company offers a wide range of TECHNONICOL products at reasonable prices -

A flat roof can be turned into a functional part country house. The article talks about the operated roofing of TechnoNIKOL, its advantages and differences from non-operated systems. The proposed material will introduce you to the features of traditional, inversion and green structures in use, and will give you an idea of ​​the components of a flat roof and the intricacies of their installation.

Great possibilities for flat roofing

About flat roofs and their advantages

Flat roofs are becoming an increasingly popular option in suburban housing construction. Choice flat design may be part of the architectural design if the house is designed in modern style. The reason lies in new opportunities - additional area(especially on small area) is a significant plus for owners. Therefore, of particular interest is the construction of an exploitable roof, allowing great benefit reclaim empty space.

Flat roof structures were not originally intended for active use. They were considered economical option due to low resource consumption (materials and construction time) compared to any pitched option. Several decades ago, designers and designers turned their attention to flat roofs as a source of new possibilities.

Modern TechnoNIKOL system

Operable surfaces appeared after the development of new waterproofing materials and principles for constructing roofing systems; TechnoNIKOL flat roofs have become widespread and have important advantages:

Durability. The service life reaches (and often exceeds) 20-25 years.

Physical parameters . The coating is extremely resistant to temperature fluctuations; designed for use in conditions from -50 to +100°C.

Technical specifications . The system is fairly lightweight and can be installed in any weather.

Waterproofing. The coating is completely waterproof; it will protect housing from heavy rains and melting snow even during partial flooding.

Reliability. The method of operation and possible loads are taken into account in calculations at the design stage; The system is resistant to mechanical damage, rotting, and mold formation.

Safety. Modern technologies and the use of safe raw materials make the roof safe for humans and the environment.

Reliable protection against moisture

Traditional (unused) roofs

If additional use is not envisaged, a traditional roofing system is installed, characteristic feature which is installation on thermal insulation; in this case on concrete base a vapor barrier is laid, then a layer of insulation and a final (finish) coating. In the TechnoNIKOL product line there is a variant of a non-operational design - an inversion roof with ballast, which can be described as follows:

Main difference from traditional (classical) designs. The relative position of the heat- and waterproofing layer has been changed.

Pie structure. Waterproofing (membrane) is laid layer by layer, then insulation and geotextiles, which perform a separating and protective role. Sometimes geotextiles separate other layers of the pie.

Ballast layer. Crushed stone or gravel ballast protects waterproofing layer from accidental damage and exposure to ultraviolet radiation, which extends the life of the roof to 25-30 years (if the installation technology was not violated).

Gym on a flat roof

Among the non-exploited options, roofing using TechnoNIKOL profiled sheets (TN-roofing Classic) has become widespread. Its advantages include fairly easy installation, high fire resistance and a neat result (thanks to welding, the seams are almost invisible). The structure is based on a profiled steel deck, the vapor barrier is an aluminized membrane, and the insulation is stone wool (absolutely non-flammable material), the covering of the roofing pie is a polymer membrane.

Operable roofs: types of structures

Classic flat roof can support weight solar panels, climate systems and air conditioners. An exploitable flat roof is capable of much more: giving the building a finished look, it saves space. To maximize this important advantage, several options for operating systems have been developed. All of them rest on a rigid base in the form concrete screed. A multi-layer TechnoNIKOL roofing pie (TN-roofing) is formed above the base; its composition determines several types of systems.

Roofing using corrugated sheets

Traditional system

An operational roof of the classical type has the following set of layers:

Base. The roof can only be installed on reinforced concrete floors.

Vapor barrier coating. It is laid directly on the reinforced concrete slab. The purpose of a vapor barrier is to protect the next insulating layer from moist air penetrating from below.

Insulation. To ensure that as little heat as possible is lost through the roof, a variety of insulating materials are used, from mineral wool to the foam.

Waterproofing layer.

Coating. In addition to decorative properties, reliability is important for the finishing coating; Therefore, materials with high wear resistance are selected.

Roof with gravel covering

On our website you can find contacts construction companies that offer. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

The construction market offers options for TN-Roofing Standard Pavement and

TN- Roofing Standard Sidewalk KMS; the structure of their roofing pie has a standard arrangement. The thickness and composition of the roof structure depends on what loads are expected:

Low. Such loads are typical for roofs in private low-rise housing construction, when a terrace with a seating area for two or three people is installed or a light-weight solarium is installed. The design includes a standard set of layers and a lightweight roofing covering.

Average. If you want to organize a terrace for relaxing a large company or arrange playground, a different level of roof organization will be required. IN roofing pie more durable insulation will be included, the front covering will be paving or porcelain tiles.

Intensive. Loads, for example from car parking, are considered high. The structure of the cake is strengthened by a second, high-strength insulating layer; The tile will have to be replaced with a reinforced concrete slab.

Video description

About the construction of exploitable roofs in the following video:

On our website you can find contacts of construction companies that offer. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

Inversion system

A traditional roof has a disadvantage - the insulation is located immediately under the covering and therefore the likelihood of its damage increases significantly. Through defects in the insulating layer, water accumulates in the insulation, reducing its thermal insulation effect and ultimately penetrating into the home. The inversion roof was invented to avoid these problems; its structure is characterized by a reverse (inversion) structure, when the insulation is located above the waterproofing. TechnoNIKOL inversion roofing is described by the following provisions:

Suitable for devices for areas with heavy loads. Compared to the traditional one, the inversion design has greater application possibilities. It is used not only to create a recreation area, walking area and solarium, but also a parking lot or a summer cafe. Owners of a country house can also count on winter Garden, decorative pond or pool.

Inversion system for pedestrian load

Type of design - green roof. Lawn planting, device flower beds, shrubs or trees are added to the building original look. At the same time decorative garden together with a layer of soil, this is a serious load on the structure, so you need to think about the arrangement of green splendor in advance.

Selection of materials. Euroroofing material is used as a waterproofing layer, bitumen mastic or PVC membranes. For insulation, materials are selected that do not deteriorate upon contact with moisture; For finishing paving slabs are often chosen. Any project flat roof The drainage system is turned on.

Advantages of inversion roofs. Such systems are characterized by the most reliable waterproofing, protecting residential premises for decades. They can take a significant and uneven load; an additional bonus is higher thermal efficiency than traditional roofs.

Video description

About the option of installing a house with a roof in use in the following video:

Minuses. Complex installation of a multilayer cake increases the cost of the structure. Technological errors made during the installation process will make the structure non-functional. The main drawback that occurs during operation is the accumulation of precipitation.

Common systems of TechnoNIKOL roofing structures in use (TN-roofing), designed for pedestrian loads, are the following varieties:

TN-roofing Sidewalk. The cake includes a drainage layer. Finish coating - paving slabs with abrasion resistance.

TN-roof Pavement KMS. With drainage membrane.

TN-roof Terrace. Lightweight system with plastic supports.

TN-roof Auto. Under vehicle load.

Seating area on flat roof

Green flat roofs

Green inversion roofs have the following features:

Restrictions. Not suitable for all types of homes; parameters are calculated during project creation.

Device principle. Decorative plantings can be located in containers, on flower beds or lawns. Thickness and composition of the top layer fertile soil determined by the type of selected plants (features of the root system). An important condition functioning is a well-organized water flow.

Selection of materials. Waterproofing and insulation must be protected from the root system of plants. The upper layers in the pie structure are responsible for this, removing excess moisture and responsible for proper drainage.

Additional layers. An inversion roof with landscaping includes additional layers of filtration (geotextile) separated by drainage (gravel).

Green roof with gazebo

Plants. There is a limited selection of plants for green roofs. During operation, care should be taken to ensure that accidentally introduced plants do not sprout, which could damage the structure.

For the roof of a house on which a green zone is planned, TN-Roof Standard Green (with a standard arrangement of layers) and TN-Roof Barrier Green (inversion) are suitable. Both systems have a waterproofing layer made of a polymer membrane.

Video description

About the installation of a green roof in the following video:

Features of installation of flat systems

TechnoNIKOL flat roof units are the most vulnerable areas in which problems are most often identified during operation and the likelihood of leakage is highest. All of them require a careful approach when installing hydro- and thermal insulation; As a rule, they are sealed. The nodes (that is, junction points) include the following areas:

Junctions of the roof to the parapet and roof corners. At these nodes, an overlap of waterproofing is created on the side surface.

To elements drainage system . Regular accumulation of water is destructive and unacceptable for any flat roof, therefore important point arrangement is the organization of water flow. For this purpose it is created minimum slope, which directs the flow to drainage funnel. The funnel assembly is reinforced with an additional layer of waterproofing and installation of a metal apron.

To the pipe exit points(chimneys, ventilation shafts). TechnoNIKOL-roofing units at the points where the pipes exit are also provided with double waterproofing, which is installed above the last (top) layer of the roofing pie.

Installation of the junction unit

Conclusion

Country houses with exploitable roofs are different modern look And original design. Installation of TechnoNIKOL systems is carried out on the basis individual project and node development. With technically competent installation and use of all provided layers, a guarantee is issued for the waterproofness of roofing materials. In addition to a high-quality and durable roof, owners receive the main advantage - the ability to use empty space at their discretion.

The TECHNONICOL company has received fire certificates for the TN-ROOF Smart, TN-ROOF Classic and TN-ROOF SMART PIR systems using wedge-shaped thermal insulation from extruded polystyrene foam, stone wool and rigid polyurethane foam (PIR) insulation as a slope-forming layer.

Independent experts carried out work to confirm the characteristics fire safety TN-ROOF Smart, TN-ROOF Classic and TN-ROOF SMART PIR from the TECHNONICOL company. These roofing solutions are widely used in construction projects large area, including logistics complexes, shopping and entertainment centers, car dealerships, industrial enterprises and other commercial real estate. The updated certificates from the fire certification body NPO Pozhtsentr confirm the class declared by the manufacturer fire danger K0 (15) for each of these systems. A special feature of the new certificates is confirmation of the safety of using all types of wedge-shaped thermal insulation produced by TECHNONICOL: sets of stone wool slabs TECHNORUF N KLIN, extruded polystyrene foam TECHNONICOL CARBON PROF SLOPE and rigid polyurethane foam TECHNONICOL PIR SХМ/СХМ SLOPE.

The obtained certificates allow the use of both polymer and mineral wedge-shaped thermal insulation in the TN-ROOF Smart, TN-ROOF Classic and TN-ROOF SMART PIR systems. The choice of type of thermal insulation is determined by the characteristics of a particular project.

TECHNONICOL wedge-shaped thermal insulation is used to form a roof slope, which avoids the formation of stagnant zones, and also speeds up and simplifies roof installation even in winter.

XPS CARBON PROF SLOPE wedge-shaped thermal insulation kits have high strength and low weight, which reduces the load on the base. This decision is patented by TECHNONICOL and has been used since 2009, having proven itself at several hundred civil and industrial sites as part of roofing systems. A set of non-flammable, hydrophobized TECHNORUF slabs N WEDGE provides a slope that creates effective removal of precipitation and ensures reliable operation roofs. TECHNORUF N KLIN is made from mineral wool based on rocks basalt group. To construct the slope-forming layer, TECHNONICOL PIR SKhM/SKhM SLOPE rigid foam polyurethane slabs are also used. Due to the closed cellular structure, the material has a low thermal conductivity coefficient, does not absorb moisture, is not susceptible to rotting, and is also resistant to high dynamic and static loads, temperature changes (from -60 to +110 degrees Celsius).

Obtaining fire certificates confirmed the high fire technical characteristics TECHNONICOL roofing systems in the case of using wedge-shaped thermal insulation to form a roof slope, while guaranteeing fire hazard class K0 (15).