Gas instantaneous water heater therm 4000 0

I have lived my entire life in an apartment with a water heater and I know all their pros and cons. Only the speakers were the simplest (Soviet cast iron and Astra). And finally, I have a new BOSCH speaker!!!

Price 9900 rub. as of January 12, 2015, but I know that it is constantly growing.

VISUAL INDICATORS:

1. It is smaller than Astra, and its exhaust pipe diameter is smaller. Dimensions (HxWxD), mm 580x310x220, weight 11 kg.
2. The wick is VERY small, almost does not heat the water, the gas control sensor is needed.

   During the day you can’t even see how it’s burning.

   Why “everything that was previously impossible is possible.”

   1. The small wick does not heat the water (immediately after turning on there is no boiling water, no need to drain, the water does not boil away and scale does not form that clogs the column).
   2. You don’t have to turn on the water fully and not be afraid that the water heater will go out (this way you can regulate the pressure and temperature of the water).
   3. You can turn on both water taps (hot and cold) at the same time; the column does not start to hiss and go out.
   4. Excellent pressure allows you to turn on the water both in the kitchen and in the bathroom (previously the pressure was only enough for one thing).

   Why "no savings".

   The problem we had was that the pressure cold water good, but there was a thin stream from the column, the column barely caught fire. And now I turn the water on only halfway and that’s enough for me. So now my water meter is shaking like crazy((((

   Another plus I would like to note is the presence of gas control, a water filter, and an overheating sensor.

   
   Very convenient andneat appearance of adjusting water pressure and temperature.

   
   

   For those who understand this

   

   

   

   

   The installer of the speaker (called from the store where it was purchased) after careful questioning admitted that there could only be one problem with it. Once every two years it is advisable to clean it from dust (the column is designed in such a way that a draft is formed in it from bottom to top and therefore dust, fluff in the summer, etc. is retained inside). But this is only if it starts to ignite poorly. In all other respects, he said that this particular model is the most perfect option, nothing extra and not expensive!!!

   I'm really happy! Well, unless of course you count the increase in water consumption)))))

The Therm 4000 GWH 10/13 model (water heater) is offered in three modifications, differing in their performance characteristics.

It is 27% more compact than its predecessor and is the most compact in its power category.

The main advantage is increased safety: if a fault occurs, for example in case of insufficient air supply, our gas water heater automatically switches off the device and, thereby, provides protection.

The minimum water pressure to turn on a water heater with piezo ignition and battery ignition is 0.1–0.2 atm. At the same time, the device operates stably and produces hot water at a constant temperature.

All modifications are equipped with a flame modulation system, i.e. automatic change power depending on water consumption. For the user, this means a constant water temperature regardless of its consumption.

A characteristic feature of this gas water heater is the developed technology that ensures safety.

Even with insufficient draft, flue gases will no longer flow back into the living space. The latest Anti Overflow System reliably ensures the removal of combustion products through the chimney.

Also, all models of the Bosch 4000 geyser are equipped with: flame control, which turns off the gas supply if for some reason the flame goes out;

overheat control, which turns off the device if the heat exchanger overheats.

Ignition of the igniter by simply pressing buttons. To ignite the igniter, you need to press the ignition gas valve opening button with one hand, and the piezo ignition button with the other.

An electric spark created by the piezoelectric element ignites the pilot burner. After the flame appears, 10–15 seconds. you must hold down the gas valve opening button.

During this time, the thermocouple, which controls the presence of the flame, heats up and, using an electromagnet, keeps the gas valve open. The water heater is ready for use. The power of the water heater is changed by the position of the slider, and the water temperature is changed by the position of the rotating knob. If the filter is clogged tap water

it can be easily removed and washed.

Minimum possible pilot gas consumption - Gas consumption by a constantly burning pilot flame in water heaters is reduced to the minimum possible.

The pilot burner nozzle is precisely designed to ensure that the flame burns steadily and can ignite the main burner.

Technical characteristics of the geyser Bosch Therm 4000 GWH 10/13

Rated power (control range), kW - 7.0–17.4 Allowable pressure natural gas

, mbar 13.0

Maximum water flow, l/min 10.0

Minimum water pressure, bar 0.1

Gas connection, thread - 3/4

Chimney diameter, mm - 110

Dimensions HxWxD, mm - 580x310x220

Fig.1. Main Components

1 - Casing, 2 - Hinges for hanging, 3 - Inspection window, 4 - Water volume switch, 5 - Power regulator, 6 - Gas pipe, 7 - Drain pipe flue gases, 8 - Protective flue gas manifold with draft control, 9 - Combustion chamber, 10 - Gas fittings, 11 - Piezo ignition device, 12 - Water fittings

Fig.2. Functional diagram

4 - Water volume switch, 5 - Mobile regulator button, 6 - Gas, 11 - Piezo ignition device, 12 - Water fittings, 13 - Heat exchanger, 14 - Main burner, 15 - Nozzle, 16 - Ignition inertia unit, 17 - Venturi tube, 18 - Adjusting conical valve, 19 - Water volume regulator, 20 - Water filter, 21 - Diffuser, 22 - Cold water, 23 - Magnetic valve, 24 - Connection for measuring (supply gas pressure), 25 - Gas filter, 26 - Screw adjustment max. gas flow, 27 - Ignition filter, 28 - Hot water, 29 - Power regulator, 30 - Main gas valve, 31 - Gas valve igniter, 32 - Ignition nozzle, 33 - Control valve, 34 - Measuring pipe (nozzle pressure), 35 - Thermocouple, 36 - Ignition electrode, 37 - gas supply tube for ignition, 38 - Temperature limiter, 39 - Draft control

Installation of a geyser Bosch Therm 4000 GWH 10/13

Before installing a Bosch geyser:

Before installation, obtain permission from the gas supply company and from the department for cleaning and checking the condition of chimneys.

Place the gas shut-off valve as close to the appliance as possible.

After connecting to the gas supply network, it is necessary to check the connection for leaks. To avoid damage to the gas fittings due to increased pressure, pressure control should be carried out with the gas valve closed. After checking for leaks, release the pressure.

Check whether the type of gas indicated on the type plate matches the type of gas supplied.

Make sure that the flow and pressure at the gas pressure regulator correspond to the values ​​​​specified for the consumption of the device.

Installation room requirements:

The device cannot be installed in rooms with a volume of free space less than 8 m3, excluding the volume of furniture, if this volume does not exceed 2 m3.

Observe local regulations.

The installation room must have good ventilation and frost protection, as well as the possibility of connecting to a chimney.

Do not install the device above heat sources.

To avoid corrosion, the combustion air must not contain aggressive substances.

Corrosion is promoted by hydrogen halides containing chlorine and fluorine compounds. They may be contained, for example, in solvents, paints, adhesives, aerosol sprays and household cleaners.

The minimum distances shown in Figure 3 must be observed.

Chimney

All gas instantaneous water heaters must have a sealed connection with flue gas exhaust pipes of the appropriate diameter.

The chimney must:

– pass vertically (with little or no horizontal sections);

– be thermally insulated;

– have an outlet above the highest point of the roof.

To connect to the chimney, you can use a flexible or rigid pipe.

The flue gas exhaust accessory must be inserted into the flue gas protection manifold. Outside diameter

The flue gas exhaust accessories must be slightly smaller than the size of the flue gas protection manifold.

A canopy must be installed at the chimney outlet to protect from wind/rain.

Installation work for a Bosch 10/13 geyser:

Remove the rotary knob from the water volume switch.

Unscrew the casing mounting screws.

Pull the cover forward slightly and remove it, moving it upward.

Using the supplied dowels and wall hooks, hang the device vertically on the wall.

Water connection

Figure 4. Water supply connection When making connections, make sure that you do not confuse the cold water connection point (Fig. 4, item A - not supplied with the equipment) with the water supply connection point hot water

(Fig. 4, item B).

Water pipes are connected to water fittings. To avoid malfunctions caused by sudden fluctuations water pressure

, it is recommended to install a check valve at the cold water inlet.

Malfunctions of the Bosch Therm GWH geyser and their elimination

1. The pilot flame went out again. The pilot flame ignites only after several attempts. The pilot flame is yellow.

Pilot burner blocked - Clean.

2. The pilot flame goes out when the hot water tap is opened. The hot water temperature is insufficient, the flame is weak.

Insufficient gas supply - Check the pressure reducer and replace it if it is not suitable or damaged. indoors - Check whether gas cylinders (butane) freeze during operation of the device. If the cylinders freeze, place them in a cooler place.

3. Water temperature is too low

Power regulator in minimum position - Check the position of the power regulator and set it to a higher position.

4. The burner turns off while the appliance is running

The temperature limiter has tripped - Turn on the appliance again after 10 minutes. If the malfunction reoccurs, call a specialist.

The draft control device has activated - Ventilate the room. Turn on the device again after 10 minutes.

5. Reduced water flow

Insufficient water pressure - Check and correct

Water taps or mixers are dirty - Check and clean.

The water fittings are clogged - Clean the filter.

The heat exchanger is clogged (covered with limescale) - Clean and, if necessary, remove limescale.

Geyser Bosch Therm 4000 WR 10-2P

The Bosch Therm 4000 WR 10 geyser with piezo ignition operates with a constantly burning wick. Depending on whether the device is used in summer or winter, you can adjust the water temperature using a special slider.

A distinctive feature of such a device with piezo ignition is reliability, quality and affordable price.

The device is mounted on the wall and can operate in an apartment using natural gas or in a country house using liquefied gas.

To operate on liquefied gas, you must purchase special nozzles separately. The nozzles are easy to install, so the specialist will not have any problems when starting the device.

The Bosch WR 10-2P geyser with piezo ignition has an accurate water heating temperature due to a stainless steel burner. The flame in the burner spreads evenly, ensuring an accurate temperature. But all parameters depend on the temperature of the incoming water.

The heat exchanger is made of high-quality copper, which is maximally protected from high temperatures, burnout and the possibility of oxidation.

Equipped with a modulating burner, which ensures uniform water temperature during use.

The minimum pressure required to turn on the water heater is 0.1-0.2 atm.

Gas water heaters with piezo ignition are designed for operation in Russian conditions, for gas pressures up to 5 mbar.

Bosch 4000 geyser adjustments

Adjusting water flow

Turn the rotary knob counterclockwise. The water flow rate increases and the outlet water temperature decreases accordingly.

Turn the rotary knob clockwise.

Water consumption decreases, the outlet water temperature rises accordingly.

Reducing the leaving water temperature to required temperature reduces energy consumption as well as the risk of limescale deposits on the heat exchanger.

Emptying the geyser

Close the cold water supply tap;

Open all hot water taps;

Remove the bracket from the filter housing on the water fittings;

Remove the plug;

Completely empty the device.

Adjusting the pressure in front of the nozzle

Access to the adjusting screw

Remove the casing.

Connect pressure gauge

Loosen the locking screw.

Connect a pressure gauge to the measuring pipe (pressure in front of the nozzle).

Rice. 2. Screw for adjusting the maximum gas flow

Pressure in front of the nozzle at maximum thermal power:

Remove the seal from the adjusting screw (Fig. 2).

Turn on the Bosch gas water heater. Set the power regulator to the extreme right position (maximum power).

Using the adjusting screw (Fig. 2), adjust the pressure in front of the nozzle.

Pressure in front of the nozzle at minimum heat output:

Turn on the device. The power regulator should be in the extreme left position.

Open several hot water taps.

Use the adjusting screw to adjust the pressure.

Reseal the adjusting screw.

Checking the correct functioning of the equipment

Check the correct functioning of all safety, regulation and control devices.

Heat exchanger:

Check the heat exchanger.

In case of contamination: dismantle the heat exchanger and remove the temperature limiter; Rinse the heat exchanger under a strong stream of water.

If the contamination cannot be removed: immerse the contaminated parts in hot water with detergent and rinse carefully.

If necessary: ​​remove limescale from the inside of the heat exchanger and connecting pipes.

Install the heat exchanger with new seals.

Install a temperature limiter on the heat exchanger.

Burner:

Check the burner annually and clean the burner if necessary.

In case of severe contamination (grease, carbon deposits): remove the burner, immerse it in hot water with detergent and rinse carefully.

Water filter:

Replace the water filter at the inlet of the water fittings.

Burner and pilot nozzle:

Remove and clean the pilot burner.

Remove and clean the ignition nozzle.

To ensure the traction control is working properly, the following steps must be taken:

Remove the flue gas exhaust accessory;

Replace it with a pipe with a plugged end (about 50 cm long);

The pipe should be positioned vertically;

Turn on the device. Turn the power regulator all the way to the right (maximum power), set the water flow switch to the extreme right position (low water flow, heat). Under these conditions, the device should turn off after two minutes;

Remove the pipe with the capped end and reinstall the flue gas outlet accessory.

Maintenance of the Bosch Therm 4000 WR 10 geyser

If a malfunction occurs in the traction control, proceed as follows:

Loosen the traction control mounting screw;

Disconnect the temperature limiter;

Loosen the connection of the magnetic valve;

Remove the thermocouple from the burner;

Replace the faulty part and install the new kit in reverse order.

Geyser Bosch Therm 4000 WR 13

The Bosch Therm 4000 WR 13 geyser is designed to provide hot water supply to apartments and private residential buildings.

Characteristic feature This column has automatic electronic ignition from batteries, i.e. the absence of a constantly burning pilot burner flame, the column automatically starts working when the hot water tap is opened and completely turns off when it is closed.

It turns on at a minimum water pressure of 0.1 atm. Automatic maintenance of water temperature when water pressure in the water supply system changes.

The Bosch WR 13 geyser is equipped with a heat exchanger made of high-quality copper, the atomosphere burner is made of stainless steel and can be adjusted to both natural and liquefied gas, has an ionization flame control sensor, a flue gas monitoring system, and a safety sensor against overheating.

Description of the Therm WR geyser:

For apartments with poor ventilation and smoke removal.

Power modulation.

Separate adjustment for power and water flow.

Connects to the chimney.

Constantly burning pilot light.

It turns on at a water pressure of 0.1 atm.

Purpose:

Preparation of hot water for domestic purposes.

Placement in living areas (for example, in the kitchen).

Unlimited period of continuous operation.

Technical equipment of the Bosch WR 13 geyser

Piezoelectric ignition.

Automatic maintenance of water temperature when water pressure in the water supply system changes.

Backdraft safety sensor.

Ionization flame control.

Overheating safety sensor.

Flue gas monitoring sensor.

Burner material – stainless steel.

Copper heat exchanger, service life - 15 years.

Exhaust gas control devices that turn off the device if there is insufficient draft.

Characteristics of Bosch Therm 4000

Nominal thermal power, kW - 22.6

Permissible natural gas pressure, mbar - 10-15

Permissible pressure of liquefied gas (butane/propane), mbar - 30.0

Natural gas consumption at maximum power, m³/hour - 2.8

Liquefied gas consumption at maximum power, kg/hour - 2.1

Gas connection, R - 3/4

Temperature, C - 35.0-60.0

Hot water flow at T 50°C, l/min - 2.0-7.0

Hot water flow at T 25°C, l/min - 4.0-13.0

Maximum water pressure, bar - 12.0

Temperature at max. power, C - 170.0

Mass flow of flue gases at maximum power, g/s - 17.0

External diameter of the chimney, mm - 132.5

HxWxD, mm - 655x350x220

Weight (without packaging), kg - 13.0

Features of the Bosch WR geyser

Wall mounting device

Ignition via piezoelectric system

Burner for natural gas/liquefied gas

The heat exchanger does not contain tin/lead alloys

Adjusts power according to water flow to maintain constant hot water temperature.

The water fittings are made from glass fiber reinforced polyamide, which is 100% recyclable.

Ensuring a constant flow of water at variable water pressure

Fig.1. Elements

Casing, Hinges for mounting, Inspection window, Water volume switch, Power regulator, Gas connection, Flue gas outlet, Protective flue gas manifold with draft control, Combustion chamber, Gas fittings, Piezo ignition device, Water fittings

Operating principle

The instantaneous water heater (gas water heater) is equipped with a piezo ignition device. This makes operation more convenient.

Power regulator from the Off position. move to ignition position.

Press and hold down the power control button. Press the piezo ignition button.

If the pilot flame lights up: after a few seconds, release the power control button.

If the pilot flame goes out: repeat the process.

In this case: Keep the power control button pressed until the gas supply pipe is completely free of air.

If ignition occurs: move the power regulator to the right to set the required power.

Using the power regulator you can set the required power. As the regulator moves to the right, power and gas consumption increase. Maximum power

To save energy: set the power regulator to a position that fully corresponds to the required power.

Once these steps are completed, the main burner lights up automatically as soon as the hot water tap is opened, as the pilot flame burns continuously.

To turn off the device: move the power control to the left until it stops.

After a few seconds the pilot flame will go out.

You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor) Delivery is made daily from 9 to 21 o'clock

, including weekends and holidays.

Goods worth up to 6,000 rubles can be picked up by self-pickup.

Pickup points

• For orders worth more than 6,000 rubles: Within the Moscow Ring Road - from 0 to 500 rubles
• , (individual delivery cost is indicated in the product card) Outside the Moscow Ring Road up to 10 km -,
• 700 rubles Beyond the Moscow Ring Road further 10 km -.
• 700 rubles + 30 rubles for each kilometer

To the regions, delivery by a transport company (calculated individually).

Delivery cost for

km from MKAD

700 rub.

Unloading of large-sized goods is carried out by the efforts and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation. Payment by bank card

to the courier upon receipt

Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).

Payment by credit card on the website

To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

Taxpayer Identification Number: 5003088884

Checkpoint: 500301001

BIC: 044525225

Bank: PJSC “Sberbank of Russia”

R/s: 40702810838060011732

S/s: 30101810400000000225

Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., office B-6

Special conditions

For goods with the status "To order" worth up to RUB 100,000. no prepayment required.

For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.

• For any item shipped transport company, 100% payment required.

On the market household appliances It's probably already hard to imagine trademark better known than Bosch. The company quite successfully supplies products under its brand all over the world, ranging from irons, refrigerators and ending with power tools. A separate division is production by a German concern heating equipment: boilers and water heaters from Bosch Thermotechnics.

Solid fuel and already long years heat houses, both in Russia and abroad.
They are especially popular among Russian consumers Bosch geysers, reviews of which can often be seen on specialized websites. Buyers are attracted by quality and reliability at affordable price for instantaneous water heaters from German manufacturer.

Let's figure out together whether a Bosch gas water heater is worth buying today, given this wide choose manufacturers nowadays. To do this it is necessary to consider the lineup, prices and specifications device from a German concern, disadvantages and advantages compared to its direct competitors on the market.

Let's do a short review geysers Bosch based on the operating instructions, as well as reviews from specialists and customers. Let's analyze the main malfunctions of the Bosch column: why the pilot light does not light up or the wick goes out, etc.

Model range and features of Bosch geysers

Bosch geysers, unlike their direct competitor, have a very wide range of models. Many modifications with different types ignition and performance, design and size. Water heaters are available in two colors: white and gray.

Bosch geysers: model range

1. Series Therm 2000 O

This is a budget geyser with a small hot water output of 10 l/min. This unit is equipped with automatic battery ignition, a tubular copper heat exchanger and gas burner made of stainless steel.

As in the columns, it contains an emergency draft and flame control sensor, as well as a water temperature sensor and a gas control system. The Bosch W10 KB speaker is compact in size and can be purchased inexpensively, starting from 8,000 rubles.

2. Series Therm 4000 O

The most popular models are available with both automatic ignition from batteries and piezo ignition by pressing a special button. Three types of different power and productivity from 10 to 15 l/min are available. Bosch geysers in this series have a high-quality copper heat exchanger for heating running water with an increased service life of up to 15 years.

Also, these models are equipped with smooth modulation of the burner flame, with the help of which the device itself maintains the set outlet water temperature. An important advantage of this model is that this column turns on at a water pressure of only 0.1 atmosphere.

Flow-through gas water heaters this series have the following designation:

— Bosch column with automatic ignition (article “B” is present): WR 10-2B, WR 13-2B and WR 15-2B;

— Bosch semi-automatic column with piezo ignition (marked with the symbol “P”): WR 10-2P, WR 13-2P, WR 15-2P.

Bosch column with piezo ignition

The main feature of this model is the presence of a fan for forced draft. These speakers can operate without a chimney, i.e. no special construction is required. This feature very convenient when it is not possible to install a chimney in an apartment or house.

The release of combustion products and the flow of air into the gas water heater is carried out thanks to a special one, which is installed horizontally through the wall to the street. This kit is an option and is supplied separately from the device itself.

One more important feature Bosch geysers of the AM1E series is the presence of a digital control panel on which the possible mistakes in case of device malfunctions. You can also set the water temperature and, thanks to even smoother and more precise modulation of the burner flame than the previous model, this water heater will maintain the temperature with an error of only 1 °C.

The model is available with three types of power, with a capacity of 12 to 18 l/min. Unlike other models, this series of devices is energy-dependent due to the built-in fan, powered by a 220 V network. They are labeled as WTD 12 AM E23, WTD 15 AM E23 and WTD 18 AM E23, depending on their rated power.

Gas water heater Bosch "automatic" with closed camera combustion

The Bosch 600 series geyser is equipped with a built-in hydrogenerator. Automatic ignition in this model is carried out thanks to the flow of water through the column. When you open the tap, water flows into the water heater, and HYDRO POWER technology automatically turns on the gas water heater through a special hydrodynamic generator.

To ignite the device, neither a piezoelectric element nor batteries are required. Available in different capacities: 10, 13 and 15 liters per minute. They have the abbreviation WRD 10-2G, WRD 13-2G, WRD 15-2G, the numbers show performance.

The control panel has a small LCD display that only displays the water temperature. This parameter is set using a mechanical regulator on front side speakers and is supported by the device automatically.

5. Series Therm 6000 S And 8000S

These are industrial models of geysers from a German concern. The productivity of water heaters of these series is 24 and 27 l/min, respectively. These speakers are capable of supplying hot water 4-5 water points at the same time. Bosch water heaters are equipped with electric ignition and an informative LCD display on the front side.

The 6000 S series model has two built-in fans to remove combustion products and suck in air. Bosch 8000 S water heater thanks to special technology condensation has increased water heating efficiency. In addition, the water valve of this model is equipped with an electric drive.

Bosch geyser device

Let's take a closer look internal organization instantaneous water heater using the example of a Bosch gas water heater of the popular “Therm 4000 O” series, model WR, with piezo ignition.

The internal structure of a Bosch geyser

The operating principle of a Bosch gas water heater with piezo ignition is quite simple. Set the water temperature regulator to the “On” position, press the button of this regulator, while simultaneously pressing the piezo ignition button from below. Hold down the thermostat button until the speaker turns on. We ask them desired temperature water.

The principle of igniting a gas water heater with automatic ignition is even simpler. We open the hot water tap on the mixer, and the column turns on itself, thanks to the batteries pre-installed in the device. Bosch gas water heaters come complete with a water heater. The pilot light for devices with piezo ignition is constantly on, but for automatic speakers it goes out when the device is turned off.

Technical characteristics of geysers Bosch WR series

Water heaters from a German manufacturer can operate on both natural and liquefied gas. The diameter of the gas supply pipe is 3/4 inch, water – 1/2. The diameter of the chimney pipe varies and, depending on the specific model, ranges from 115 mm to 135 mm. Other parameters can be seen in this table.

Bosch geysers: technical specifications

1. The pilot flame goes out or the column does not light up the first time.

The pilot burner needs to be cleaned.

2. The igniter goes out or the wick goes out when opening the tap on the mixer.

Check the pressure if the dispenser runs on liquefied (cylinder) gas.

3. The water coming out is not hot or cool enough.

Check that the temperature regulator on the column is set in the correct position.

4. The pilot light goes out periodically.

The draft or water temperature sensor may be triggered. You need to call a specialist to fix these problems.

5. Poor water pressure through the column.

Either the heat exchanger of the column or water unit, or the mixer is clogged. Identify the source of the blockage and clean it.

6. The automatic dispenser does not turn on (does not light up).

Check the condition of the batteries. Replace them with new ones.

Advantages of Bosch speakers

— high-quality assembly;
— quality materials;
— wide model range;
— modern technologies;
- quiet operation.

Disadvantages of Bosch geysers

- an insufficient amount service centers;
— price per column;
— prices for spare parts.

Today we looked at the legendary manufacturer of household appliances, in particular, geysers from the German concern. All models, series and technical characteristics were analyzed in detail geysers Bosch. Reviews may vary, but speakers from this manufacturer undoubtedly occupy one of the first places in the ratings for quality and reliability. Let's watch the video.

In fact, the only drawback of devices of this brand is their price: a Portuguese-assembled model will cost an average of 12-15 thousand rubles. And it’s up to you, of course, to decide whether to buy a Bosch gas water heater today or not.

Geysers Bosch Therm 4000 O are instantaneous gas water heaters with open camera combustion. The model range is represented by geysers with a capacity of 13 to 18 liters per minute.

Bosch geysers are adapted to Russian conditions and operate stably at pressure in the water supply system up to 0.1 atm.

Automatic power change depending on water pressure.

Gas instantaneous water heaters Bosch Therm 4000 O are designed for installation in apartments and private houses. They are perfectly balanced and provide large quantities hot water. This model range is characterized by convenient controls and many adjustments. If necessary, Bosch Therm 4000 O water heaters can be operated on liquefied gas. Their advantages are:

• Large selection of models;
• High quality build;
• Use in design is environmentally friendly pure materials;
• Extreme reliability and ease of operation;
• Automatic support of the set temperature regardless of water and gas pressure.

The heart of gas instantaneous water heaters is a copper heat exchanger made from pure copper. Thanks to the special properties of this metal, the heat exchanger ensures proper preparation of hot water. Heating is carried out using atmospheric burners, and the temperature range ranges from 3 to 60 degrees.

Water heaters from this model range can start at low water pressure, which is very important for Russian conditions, where drops in water and gas pressure are often observed. Inside the water heaters of the Bosch Therm 4000 O model range you can find a piezo ignition system, an igniter, a battery-powered ignition system and a powerful high-performance burner. Flue gas monitoring systems, an ionization flame control system and a water overheating sensor are responsible for the safety of surrounding people. Reviews from experts indicate that Bosch Therm 4000 O water heaters have excellent endurance and fully meet the manufacturer's stated characteristics. Some boilers from this model range can operate in apartments with faulty air conditioning and smoke removal systems. The time of continuous operation when switched on is not limited. The estimated service life of Bosch Therm 4000 O water heaters is about 15 years.

Bosch Therm 4000 O water heaters are able to maintain a constant water temperature, which many users will appreciate. For this purpose, a gas distribution system that responds to water flow is used. The main advantage of Bosch Therm 4000 O water heaters is their miniature size, thanks to which they can be installed even in small apartments. Buyers have a wide range of models to choose from, differing in the design of smoke removal systems and performance. The front part houses controls that even an untrained user can understand. Appearance differs in severity and miniature. Many users who have installed Bosch Therm 4000 O gas instantaneous water heaters note a reduction in gas consumption costs. Water heaters automatically regulate the fuel supply, which is why such high efficiency is achieved. They can also work in country houses, not connected to the gas main, which will require a simple reconfiguration to work with liquefied gas.