home · Tool · DIY flower pots made from plastic bottles. A simple plastic planter. Crafts from plastic bottles for the playground

DIY flower pots made from plastic bottles. A simple plastic planter. Crafts from plastic bottles for the playground

Decorate your home interior or garden with an original flowerpot made from plastic bottles it can be quite simple! You don't have to apply special efforts, besides this option It's also quite economical. The only thing you need here is your imagination, non-standard solutions and an ordinary plastic bottle!

This master class describes in detail the process of making an original flowerpot in the shape of a cute owlet.

To do this you need:
- plastic bottle;
- scissors;
- marker;
- an owl template, you can find it on the Internet or draw it yourself;
- acrylic paints;
— synthetic or kolinsky brush;
- a piece of foam sponge;
- rope;
- acrylic paint for facade works(water emulsion),
— transparent acrylic varnish (required).
So, let's get started...

A plastic bottle can be taken in any shade and size. For the master class, I took a two-liter bottle. Next, I cut the bottle in half. The lower part of the bottle will be the main one; if desired, it can be made higher. This is what happened.

We put the pre-prepared template inside the flowerpot and transfer its outline onto the plastic using an ordinary black marker.

The picture should look like this.

You can use other animal patterns to make flowerpots.

We determine how far below the owlet’s face the rim of the product will go, while marking the place of the cut.

After this, carefully cut off the excess material.

If the flowerpot is hanging, then leave small loops; if not, cut off exactly part of the rim. This is what the workpiece looks like.

We make holes in the loops for the rope. Since this is a flowerpot, special holes in the bottom are not required.

Before painting, the craft should be coated with white water-based emulsion so that the colored paints adhere well to the plastic.

I use a foam sponge for a dense, uniform coating, since when applied with a brush the surface will be bald.

I carefully cover the entire outer part of the product, without touching the contour lines of the face.

You will get a surface like this, it is a little textured due to the thick consistency of the paint.

The result is something like this.

After applying the layer, the surface of the pots should be completely dry. If desired, the procedure can be repeated.

Gradually drawing wings, eyes, feathers, etc.

Experiment with texture.

For better contrast of some details, you can use a marker.

This is what happened in the end.

After the painting has dried, apply it to the entire surface. external walls flower pots, acrylic facade varnish.

Such products have different effects after drying (matte, silky-matte or glossy), you can choose at your discretion. This procedure is mandatory, because when spraying or watering, water will often get on the pots, and water is the main destroyer of these paints. The product should be coated with it in several layers, I cover it in two. Every next layer It will take longer to dry, keep this nuance in mind!

Once the cover of the plant pot has completely dried, it is time to thread the rope through the loops.

WITH inside It is necessary to make large knots so that the rope does not slip back.

This is what the craft will look like without a flowerpot.

We insert a small flowerpot with flowers into the flowerpot.

That's all, the original flower pot made from plastic bottles is ready!

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The final look of the craft. Photo 3.

With this simple step by step instructions in literally 10-15 minutes you can make a charming flower pot from a plastic bottle with your own hands. We will tell you how to turn an ordinary and used bottle into a cute little cat. The craft is so simple and understandable that even small children can handle it.

Such flower pot fits well both in the country house and in home interior. If you have children, let the flower in a “cat” stand in the child’s room, especially if he makes this pot with his own hands. True, in the process of creating crafts, you must strictly follow safety precautions: cut the bottles yourself, do not trust a child to do this, and you need to paint them with rubber gloves, preferably also with a gauze bandage to cover Airways(fresh acrylic paints have practically no effect on adults at all).

What do we need?

  • clear plastic bottles
  • acrylic paints (can be in a spray can)
  • permanent marker
  • decorative varnish (non-toxic)
  • priming
  • plant

Plastic bottles don't have to be big. If, for example, you decide to plant a cactus in a pot, you can even take a 0.5 liter bottle. For large flowers, bottles from 2 liters are more suitable.

How to make a pot?

We cut the bottles so that we form two cat ears in front and a tail in the back. If the edges are too sharp, you can carefully melt them using a candle or lighter. Keep the bottle at a distance of 2-3 cm from the fire, with its edge facing towards it. Take precautions!

Painting the future flower pots both from the outside and from the inside. Acrylic lays flat on plastic, so there should be no problems. Since we paint on the inside too, the craft will not turn out pale - there is no need to apply an additional layer. If you have paints in spray cans, use them, the scheme will be the same.

We draw eyes and ears on the bottle using permanent marker. If you don't have one, use acrylic paint of a different color and a thin brush.

Leave the cats to dry for a day. If you wish, you can coat the flower pot with a non-toxic water-repellent varnish (if your acrylic is already water-repellent, you do not need to do this).

All that remains is to pour the soil (this is important point, since we need to make plastic pots stable). Next, you can add soil or plant the flower directly in the ground - it depends on the plant itself and its needs.

Gardeners and hobbyists indoor plants You should definitely know how to make flower pots with your own hands. Tubs and pots will transform the interior and add a “zest” to each plant. In addition, homemade pots will help you save money and get rid of unnecessary items and materials.

Decorative pots provide great opportunities for creativity. They can be painted, decorated with decoupage, ribbons, fabric, accessories, made from different materials and give it the most unusual shape.

We do it ourselves

It’s not hard to think of what you can make pots out of.

For flower pots Any will do material, including waste material, which does not allow moisture to pass through and holds its shape well.

Undoubtedly, the most beautiful and comfortable pots are ceramic. If it is possible to make a pot on a pottery wheel, then you should confidently use it. Clay - optimal material for planting domestic and ornamental plants. It retains moisture and allows air to pass through, does not overheat and holds its shape well.

If it is not possible to make a pot yourself, then you can purchase a ready-made one and figure out what and how to decorate it. There are many ideas for decorating pots. It is not necessary to paint the pot with paints; you can use your imagination and come up with the most unusual “outfits” for it.

Thrifty gardeners can save on ceramic pot and make it from scrap materials. The simplest pots and tubs are made from plastic bottles. Just cut it off top part, fill up the soil and start planting the plant. However, you can get a little creative and make elegant flower pots from such an unattractive material as plastic.


For making two versions of pots You will need the following materials and tools:

  • 1.5-2 liter bottle;
  • CD;
  • glue gun;
  • stationery knife;
  • marker;
  • hole puncher;
  • spray paint.

Progress:

  1. Draw a wavy line in a circle approximately in the middle of the bottle (a straight line can be used) and carefully cut the bottle into two parts along it (you get two blanks for pots);

  1. Glue the part with the neck to the middle of the disk (before screwing the lid tightly);

  1. When the glue sets, turn the workpiece over and drip a little glue along the edges for stability;

  1. Use a hole punch to make holes along the wavy edges;
  1. Spray paint the resulting pots and wait until completely dry.

The pots are ready! You can plant plants.

To ensure that the edges of the cut bottle are even and smooth, they can be trimmed with a soldering iron. You can also use a soldering iron to give the edges an original shape.

Hanging pots are also easy to make from bottles. The most simple model suspended from both sides - by the bottom and neck. One side of the bottle must be cut lengthwise, and two through holes must be made on the sides with an awl or soldering iron so that the pot-bottle can be hung.

Plants can be planted directly in such pots, or they can be used as flowerpots. If desired, paint the outside of the bottles acrylic paint.

More interesting models- cats. To make them you will need:

  • bottles with embossed bottom;
  • marker;
  • spray paint;
  • stationery knife;
  • soldering iron or awl;
  • ropes or pieces of strong fishing line (4 pcs.);
  • sample.
  1. Cut off bottom part bottles;
  1. Draw ears by hand or using a template and cut them out;


  1. Paint the workpiece from a spray can and wait until it dries completely;

  1. Make a muzzle with a marker: draw eyes, ears, mustache, nose;
  1. To hang the pot, you need to make holes on four sides and thread ropes or fishing lines into them.

Ready! You can plant a plant.

Instead of cats, you can make other animals, for example, a bunny or a bear.

Original pots are easily made using tin cans and clothespins. To do this you need to do the following:

  1. Peel off the label and wash tin can, dry;

  1. Attach ordinary wooden clothespins tightly to each other to the wall of the jar.

The result was a small pot, reminiscent of a traditional tub. If desired, you can paint the clothespins with acrylic paints, and so that they retain their original appearance longer, coat them with varnish.

Eco-friendly pots and vases can be made from wood. They will decorate both the apartment and Vacation home. Tree - cheap material, easy to process. However, it is worth remembering that when making wooden pot The hygroscopicity of wood should be taken into account. To prevent the tub from starting to rot or deteriorate from moisture, it must be treated in a special way– impregnate with moisture-protective agents, cover with stain, varnish or other means.

The easiest way is to assemble a pot from ready-made wooden beams, securing them with glue or nails.


Unusual outdoor wooden tubs and flowerpots for summer cottage can be made directly from a piece of log.

If you want to plant your flowers in a beautiful decorative pot, but there is no suitable container on sale, you can make a flowerpot from a plastic bottle. Homemade container can be stylized as bronze, gold or any other metal.

To make an original flower pot you will need:

  • volume 5 l;
  • several old newspapers;
  • napkins;
  • PVA glue;
  • dye.

You will need to use scissors, a soldering iron and paint brushes. A glue gun is used to make the base. You can make a pot in a few hours. The finished product is varnished to give the pot a “metallic shine.”

Preparing a plastic container

To make a pot, cut plastic container in half. Cut off the bottom of the bottle. It will serve as a stand for a flowerpot. In the center of the base you need to cut a hole for the neck of the bottle. Its second half is the main part of the pot.

In the lid five liter bottle, cut several drainage holes to drain water. Without them root system the plants will rot. The stand for the pot and its main part need to be fastened liquid nails or glue using a glue gun.

Preparing decorations for a flower pot

To decorate the pot, you need to make decorations from newspapers. To do this, roll up several tubes of newsprint. Then make six “snails” from the tubes. Make flower petals out of five, and use the sixth “snail” as its middle.

When all the decorations are ready, you can start decorating the plastic base of the pot. She is being pasted over newsprint. Then another layer of PVA is applied to the newspaper to glue the napkins to the paper. Use a brush to wrinkle them a little. This gives the flowerpot texture. The pot is then decorated with a flower made from newspaper tubes.

Painting the pot

When the glue dries, you can paint the pot any color you like. To style the pot as bronze, it is painted black with splashes of purple and bronze paint. The flower pot can be varnished to make the flowerpot look stylish.

After the paint has dried, such a pot is filled with fertile soil mixture and plants are planted in it. Any indoor flower will look great in such an original flowerpot.

A great idea is to make a simple flower pot from a plastic bottle. Decorating your home with plants has been popular since ancient times. It’s good when the house or apartment is spacious - you can enjoy growing flowers and greenery. But many of us have to make do with just the window sill space.

With the advent of products such as pots and flower pots, there are many more opportunities for interesting and original decoration premises. Finding a beautiful pot or flowerpot is not an easy task. I would like to add that pots are suitable for both indoor plants and outdoor flowers.

Pots are mostly made of clay and plastic. Less commonly used are plastic and ceramics. New clay pots Before planting flowers, it is recommended to immerse them in water for 1 hour. This way, gases and harmful salts formed during firing come out of the pores. As for the materials from which the pots are made, these are most often wood, ceramics, metal, plastic, rattan, polystone, glass. It is necessary to understand the difference between a flower pot and a flowerpot:

The pot has special holes through which excess moisture comes out. Flowerpots do not have holes. Do not forget that 10-15 minutes after watering, the remaining water must be poured out.

An original flowerpot with cat faces is suitable for the garden and for the windowsill. Make this craft from bottles of different sizes (for example, 2 liters and 0.5 liters).

For work we will need:

  1. Plastic bottles 2 liters and 0.5 liters.
  2. Markers.
  3. Acrylic paint or white spray paint.
  4. Scissors.

You need to cut off the bottom of the bottle, and then cut off the top so that you get cat ears.

Then we need to paint the resulting blanks with acrylic paint or spray paint.

The product needs to be dried and a drawing applied with markers. Draw the cat's face. You can use the template. The template is given in two versions: for a 2 liter and 0.5 liter bottle.

When the product is ready, pour gravel on the bottom for drainage. Then we fill it with soil and plant the plant. Such a flowerpot can be made hanging - to do this, make holes on all four sides and thread 4 ropes of equal size into the holes. Tie all ends together on a hook.

In this simple way you can make not only cats, but also other animals.

Our master class is now complete. Funny crafts made from materials that are usually thrown away.

Let's try to make an original flowerpot with our own hands from ordinary plastic. We have a shampoo bottle.

To work you will need:

  1. Shampoo bottle.
  2. Scissors.
  3. Model knife for cutting bottles.
  4. Colored adhesive tape(can be replaced with braid).
  5. Hearts, beads.
  6. Glue Moment.
  7. Insulating tape.

Use a knife to cut 2 holes in the plastic bottle. The hole is a long oval. To avoid sharp cuts, we cover the holes with electrical tape. Decorate the neck and sides with colored ribbon.