DIY floor vase made of cardboard. A big masterpiece with your own hands: we make a floor vase to decorate your home. DIY floor vase made from newspaper tubes

Today, it is rare that any interior, like a landscape, can do without expressive and spectacular accessories. One of them can rightfully be called a floor vase. In order for it to look stylish and harmonious in its designated place, it is not at all necessary to buy a finished product. It is quite possible to do it yourself, which is what will be discussed in this article.

Selecting size and shape

Floor vases can be different: high, medium height and width, large and moderate in size. The parameters of a floor vase depend on a number of factors. One of the key ones is the design of the surrounding space. For example, the dimensions may depend on the footage of a particular room, because the smaller it is, the smaller the vase itself should be. If you do not take this fact into account, the accessory may look too bulky in the interior, thereby disrupting the visual balance.

The height of the product can vary from 40 to 90 cm. It is selected paying attention to the height of the walls and the spaciousness of the room, since an accessory that is too tall can visually make the height of the walls smaller, which is unacceptable. The width is selected based on own preferences, as well as the mold available for production. In addition, it may depend on the chosen style, which should coincide with the interior design.

The shape of a floor vase can be conventionally round, square, or triangular. Each type has its own nuances, for example, a rounded shape is considered the most harmonious for blending into different stylistic directions design. You can make it using bottles or even three- and five-liter glass jars. The papier-mâché technique is also suitable for this.

A square floor vase is good for modern interior compositions. The basic form for its manufacture can be an ordinary cardboard box. Options triangular shape It’s a little more difficult to do, since it’s less common to find such shapes. Products of this type are often made from available raw materials or various components (for example, newspaper tubes).

Manufacturing methods

You can make a floor vase with your own hands from waste material, improvised means and even ordinary dishes. Craftsmen make such accessories not only from three-liter jars and papier-mâché, but also from plumbing pipes, plaster, twine, and linoleum. To make it stand out against the background of the interior, and also fit harmoniously into it, it is better for a beginner to choose the option of a symmetrical round shape to create. It is important to take into account: the product looks better against the general background if its shade does not match the color flooring, furniture and wall coverings.

From a three-liter jar

This kind of work is notable for the fact that without drawing skills, it allows you to get a product with imitation artistic painting. In addition to the jar, to make a vase you will need napkins for decoupage, acrylic paints, brushes, twine and special glue, as well as the necessary decorating accessories (selected at will). The method of making such a floor vase consists of several successive steps:

• the surface of the jar is degreased and coated with white acrylic paint;
• after it dries, twine (or tape) is wound around the neck;
• prepare decorative elements (cut out from napkins);
• they are glued on, straightened with a brush, creating a pattern, ornament or other composition;
• After they dry, transparent acrylic varnish is applied on top.

The decor in gold and bronze looks beautiful, and to create a vase like this, it is enough to use a contour gel and draw a simple design with it. If you cover such a product on top dark paint and spray gilding in places with a sponge, such a vase will look expensive.

Out of a beautifully shaped box

Such vases look quite unusual in the interior; they are very impressive, but are suitable mainly for modern style, and landscape compositions. To make it you need a box (mold), plaster (cement), container for forming internal space and cling film to make it easier to remove the vase from the base:

• gypsum is mixed with water until smooth, achieving the consistency of thick sour cream;
• it is poured into the box in a small layer;
• a smaller container is placed inside, placing it in the center;
• add the mixture to the desired level;
• when the composition is completely dry, the vase is removed from the mold;
• processed with fine sandpaper and decorated.

If you want to add a design to such a product, you can do this using spray paint and lace braid. The braid is tightly attached to the base, and paint is sprayed on top of it. If you want more chic, you can add a little silver or gold by applying it with a sponge.

From a plumbing pipe

For such a product, sometimes not only the usual improvised materials are used, but even nylon stockings and knitted fabrics. The design of the future vase depends on the type of product itself, its material and shape. Options with kinks are more suitable for decorating landscapes and cottages. Products with a straight cylindrical shape are relevant for city apartments.

The best materials suitable for the job are plastic and metal plumbing pipes. They can be pasted over various decor(including even cereals), or you can give it a relief pattern. For example, you can make a plastic trio from pipes of different heights by cutting their tops at an angle. The bottom of such vases is made of cardboard, although if desired and appropriate skills can be welded to metal.

You can put a nylon stocking on each pipe, forming folds. The surface is impregnated with glue and waited until it is completely dry. After the base has been created, they begin to decorate the vases, covering each of them with special paint in cans.

The color is chosen based on the features color solutions specific room in which the accessory will be installed. All you have to do is add a little gilding or even glitter - and the unique decor is ready.

From a paper tube from linoleum

This product can be used for dry branches. Creating it is simple: you will need the pipe itself (you can buy it at a hardware store), twine or rope thread, some cardboard, a hot-melt gun with glue and a saw for cutting the pipe. The manufacturing method is as follows:

• cut off from the pipe required quantity, having previously decided on the height of the vase;
• take thick cardboard and, placing a pipe on it, trace it, and then cut out the bottom;
• Having glued the bottom to the future vase, they decorate it using rope thread or twine;
• thread is wrapped around the vase from bottom to top, gluing it to the base using hot glue (you can also use other adhesives);
• Having tightly wrapped the product to the very top, cut the thread;
• For stability, place a little paper or small stones inside.

Made from thick cardboard and cardboard tube

To create a Greek vase you will need old newspapers, a cardboard tube and several large boxes that you can get from the store. You will have to cut out the base of the vase from them, so it is advisable to take boxes of approximately the same size (there is no point in gluing them). This option for making a floor vase is more labor-intensive, but the appearance of the finished product will delight not only the owners of the house: such a product will be a rather bright and memorable accent of the interior. Such a masterpiece is created using the following technology:

• correlate the height of the pipe, the desired height and the size of the existing boxes (everything should be the same);
• cut out a vase template, trace the blanks along it, cut it out and fold it in half;
• when there are enough of them, they paste them over cardboard tube(it will look like an accordion);
• then they tear the newspapers into pieces, soak them in PVA glue and create the base of the vase, pasting it from bottom to top in several layers, trying to ensure that the shape is even;
• after the newspaper, you can stick on several layers of toilet paper;
• when it dries, the surface is covered with dark paint;
• an ornament is drawn using contour gel or special contour paint;
• you can cover the vase with another thin layer paint, and then mark the relief pattern with bronze or gold paint.

To make a vase look expensive, you need to make it as carefully as possible, paying attention to the neck and bottom. When coating, it is important to paint them too; the lines of the design must be even, and when decorating, identical.

Decorating the finished product

Decorating a finished accessory will require knowledge of basic stylistic skills, without which it is difficult to make it appropriate in a particular interior. Today fashion trends are aimed at combining conciseness and functionality. The decor should be minimal; it is important that, despite its apparent simplicity, the product looks status, impressive and professional, as if it had been purchased in an expensive store. Therefore, you need to approach the issue of decoration especially carefully.

Depending on the type of material used and the technique for making a floor vase, you can use the following to decorate it:

• mosaics, including homemade ones made from multi-colored tiles and mirrors;
• flat buttons different sizes and shapes;
• coins;
• coarse salt;
• cereals, sunflower and pumpkin seeds;
• dry branches different lengths and curvature;
• cuttings of branches;
• twine;
• tree bark;
• newspaper tubes;
• stationery erasers;
• bracelets made of beads on a rubber thread;

Floor vases have been excellent home decorations for many centuries. During ancient civilizations, large vases already existed. They were used not only for flowers, but also for storing bulk substances. Now there is no problem in choosing beautiful floor vases. But it is better if this piece of furniture is made by the caring hands of the owners of the house. In addition, this will help save the family budget.

History of floor vases

IN Ancient Greece vases were used to store various liquids and bulk substances. A tall floor vase was a mandatory item in the Middle Ages in the homes of aristocrats. She symbolized wealth and well-being. Not much has changed since then. Now this item can be seen in hotels and country houses, and in beauty salons. They always look stylish and create a sophisticated atmosphere in the room.

Ideally, a tall floor vase should be between 40 cm and 1.5 meters in size. But there are also very tall specimens - up to the ceiling.

What can you make a floor vase from?

There are a lot of materials for creativity. Anything that resembles a tall vase can be used to eventually turn into a work of art. These are various plastic bottles and carboys, large glass vessels, cardboard packaging in the form of tubes, plastic and metal pipes.

Auxiliary materials include ropes, paper, salty dough, stones and even pasta. A tall floor vase can be obtained if you use the papier-mâché method. You can make a very nice wicker from newspaper tubes.

Plastic floor vases

Plastic bottles are turned into floor bottles. Plastic tall structures the results are light in weight. Therefore, they are made heavier for stability. To create, you will need several two-liter plastic bottles.

First you need to cut off the top and bottom parts of the bottles and insert them into each other. There is no need to cut off the bottom of the future vase. Then you need to stick it on the structure in several layers. toilet paper or paper kitchen towels. In this case, use the last layer should be with an ornament created using paper soaked in glue. All this is secured with spray paint. A vase in bronze, gold and copper colors will look very impressive. To ensure that a tall floor vase stands on the floor and does not fall, you can pour decorative stones inside.

Glass vases

To create such a vase, you can buy a ready-made transparent vase or take a large glass bottle. You can decorate it using a thick rope. To secure it to the glass surface, it is convenient to use a glue gun.

To apply a decorative pattern, you can use a transparent sealant. To begin with, the surface of the glass must be thoroughly cleaned with acetone. Now you can apply the pattern. It can be anything, for example, repeating the texture of tree bark. The workpiece must be left to dry for 24 hours. Then you can start painting the vase. You can use two or three colors. Depending on the pattern and the author's ideas. It is better to take acrylic for even spraying. Floor vases, tall, decorated with your own hands to imitate wood, look great with

To create a pattern on a cylindrical glass vase, you can use rubber bands. They need to be pulled onto the vase in a chaotic manner, and then sprayed with paint. The result is a stylish striped pattern.

Floor-standing, tall, glass vases can simply be decorated with various objects (coins, buttons, ribbons, cereals). You can buy stained glass paints in craft stores and create your own work of art from a simple glass bottle.

Vase made of glass jars

Original floor vases for flowers, tall and not very tall, can be obtained if you take two three-liter jars (preferably with a wide neck). They need to be glued together at the bottoms. Glue for this purpose Any will do for glass. To make the vase more stable, the bottom jar must be filled with resin. Cover the neck of the bottom jar with a disk or any round object (for stability). After the glued cans have dried, they need to be puttied and painted. Or you can use the papier-mâché method and then apply a decorative pattern. To create a vase in nautical style They use ropes, shells and small pebbles. The napkin decoupage technique gives room for imagination in decorating a floor vase.

Vase made from cardboard packaging cylinder

Cylinder from thick cardboard, on which linoleum is wound. You can ask for it in construction stores. Next, you can give the product any shape using papier-mâché or gypsum mixture. For stability, glue a circle of plywood to the bottom. Decorate - with any in a known way: cloth, rope, eggshell, nut shells. These vases look beautiful, three in one composition. To do this, they can be glued to one wooden base. The height of the vases should be different.

Pipe vase

Craftswomen learned to make floor and tall vases with their own hands from plumbing or water pipes. It can be purchased at a hardware or specialty store. Afterwards it can be covered with newspaper sheets or thin paper. After drying, apply a universal primer. Interesting solution To decorate such a vase, it will be covered with natural tree bark. In order to disinfect collected material and get rid of the bugs, you need to carry out a number of actions. The bark must be boiled and left in this water for about a day. After this, it needs to be dried well for 2 days. You can glue the bark with any glue that is suitable for wood and plastic. The bottom of the pipe is filled with gypsum mortar or resin. The surface of the bark is covered on top. Several layers are needed.

The result is tall, decorative floor vases that will look perfect in any room design. Especially when it comes to fashionable environmental style.

Floor vase made of newspaper tubes

Perfect for country style. If wicker or rattan is difficult to get, then newspaper tubes are perfect for weaving. First you need to familiarize yourself with the technique for creating these rods. So, you will need a stack of newspapers, PVA glue and a lid from a pot or frying pan. To make flagella, just twist a sheet of newspaper from one corner to the other. If you are new to weaving, then it is better to make the bottom from cardboard. But you can also weave it. Next, we bend the twigs up and begin to weave the leg of the vase. Then you need to make the vase expand. To do this, a lid of a larger diameter than the vase leg itself is used. We insert it into the middle of the weave and continue to weave another 12-15 rows. To narrow the vase towards the neck, you need to use an elastic band. The rim of the vase can expand again. At the end, we braid the remaining rods so that we get a braid along the edge of the vase. We cut off the unnecessary remains of the tubes. That's it, the vase is almost ready. All that remains is to cover it with paint or stain, and then apply varnish.

Such inexpensive and unbreakable vases are suitable for those who have small children and animals at home.

Square vase from a box

To create a square vase, a regular one will do. cardboard box suitable shape. If you don’t have one, you can adjust the shape of the box you have on hand using a stapler or glue.

Many people can’t even believe that they can make such tall floor vases with their own hands from simple cardboard. The master class below will help needlewomen create a miracle.

To work you will need:

• decoupage napkins;
• decoupage glue or PVA, diluted with water;
• cardboard box;
• paper;
• scissors;
• and paints;
• aerosol and water-based paints;
• PVA glue.

In order for all the layers to lie firmly on the box, you need to lubricate it with a primer. After drying, you can start gluing pieces of torn paper using PVA. A few layers are enough. After drying you need to apply a layer water-based paint. We dry it again, and only after that can we apply a layer of base paint, the same color as the future vase. To give the surface a relief, crumple up a napkin and glue it to the surface. Now we cover this relief with paint (of a different shade). Using stencils you can apply patterns to the vase.

DIY wooden floor vases

A do-it-yourself floor, decorative, tall vase can be made from wooden blocks. It will have a square shape. Height and width depend on the preferences of the master.

You will need:

• four elongated, rectangular planks;
• one wooden square (this is the bottom of the vase);
• PVA glue;
• screws;
• mastic for sealing seams;
• acrylic paint;
• decorative elements.

Fold all parts of the future vase and fasten them with glue and self-tapping screws. Seal seams and cracks with mastic. Leave to dry for a day. Afterwards, you need to remove the remaining mastic using a machine and sand the surface. You can decorate the vase in any way. A drawing or ornament applied using stencils and paints looks best on such a vase.

How to choose the right floor vase for the room?

To choose the right floor vase, you need to consider the following factors:

For a small room, vases that are flat in shape and not very large are suitable. For large premises tall and wide-area vases of the most various forms. If the interior contains carpets and curtains with ornaments, then it is better to choose vases with a smooth and shiny surface. Vases with large textures, notches and patterns will look good in a calm and discreet room environment.

Vases can be placed by the window, between chairs, in a niche, against a wall or in a corner. To prevent a bright vase from getting lost, it does not need to be placed close to the furniture.

Before decorating a room with ethnic items, it is worth studying all the ornaments and designs. Do the hieroglyphs mean something not quite decent?

If you need a floor vase only for flowers, then it is better to give preference to a white or transparent vase. Bright colors and decoration will distract attention from the beauty of the bouquet.

A fashionable technique is to place together vases of the same style, but different in color or texture.

The main condition is that the floor vase must be pleasing to the eye and liked by the owners of the house themselves.

Today, only the lazy do not improve the design of their home. Fashion trends allow us to satisfy the most sophisticated tastes of demanding consumers. At the same time, the demand for decoration remained at all times. interior design tall floor vases. However, their price availability does not always coincide with what is desired. appearance. Like any other thing, you can make a floor vase with your own hands. Such a beauty will have the desired shape and the desired shape. color scheme, and much cheaper than their store-bought counterparts.
Materials for work:
Glass jar with a capacity of 3 liters – 2 pcs.;
Tea saucer – 1 pc.;
Plastic container for preserves – 1 pc.;
Silicone sealant – 1 bottle;
Liquid PVA glue (construction) – 1 liter;
Construction alabaster – 4 tbsp;
Potato starch – 100 g;
Egg racks – 4 pcs.;
Vegetable oil – 1 tbsp;
Vaseline – 1 tbsp;
Three-layer napkins – 2 pcs.;
Plasticine – 1 box;
Old tube of PVA glue with a narrow spout – 1 pc.;
Liquid nails glue, white and gold paints, blush, eye shadow, face powder, brush, colorless acrylic varnish, water.

Stages of work:
First stage: forming the basis.
We turn one jar upside down and glue “ liquid nails» a tea saucer turned upside down towards him.

We glue the bottom of the second can to the bottom of the same jar.

What makes our home truly cozy? Of course, nice and stylish little things! An important element Floor vases can complement the design of your apartment or house.

And here's good news for you: you don't have to spend a lot of money on expensive designer new items. Floor vases can be made with my own hands, and from rather ordinary raw materials!
Today you will learn how to make a beautiful floor vase from waste material with your own hands easily and efficiently.

Ready to create? Then let's go!

DIY floor vase from a jar

Sometimes you can create the most unusual things from the most simple materials. Look at this vase, would you think that the basis for it was the familiar three-liter jars? That's the same!

Admit it, did you want one for yourself? Then take out your reserves of creative energy from your pockets and go ahead!

To create a floor vase from a three-liter jar you will need:

• Two 3 liter jars;
• One tea saucer;
• One plastic container from canned food;
• PVA glue;
• Cardboard egg trays;
• Silicone glue “liquid nails”;
• Acrylic paint;
• Decorative elements of your choice;

Stage No. 1

Let's create the base of our vase. To do this, take two jars, fasten the bottoms with silicone glue, and glue an upside-down saucer to the neck of one of the jars. It will serve as a stable leg for the future masterpiece.

Then we trim Plastic container from the can and attach it to the neck of the top can with glue.
Let it dry overnight.

Stage No. 2

During this period, we can soak pre-shredded cardboard egg trays in water until completely limp. After this, the cardboard should be squeezed out thoroughly and mixed with PVA glue until a homogeneous mass is obtained.
Apply the slurry to the base of our vase in an even layer.
Leave for two days.

Stage No. 3

After the workpiece is completely dry, level the texture with alabaster.

Stage No. 4

In this form, the vase is completely ready for the final stage of finishing - decoration. Use your own imagination or the tips we will give below.

DIY floor vase made from plastic bottles

Another chic option for waste-free use of garbage. Don't throw away plastic bottles, you can use them to create real masterpieces for your home!

A floor vase from plastic bottles can be made in different styles. For example, a regular five-liter bottle with a cut-off neck, wrapped in thin birch bark, can be an excellent option.

Idea: "Dress" plastic bottle in a stylish “sweater”, crocheted or knitting needles. This know-how will pleasantly surprise guests and fill your home with comfort and warmth.

Floor vase made of cardboard and papier-mâché

Yes, you read that right, you can also make a stylish floor vase from cardboard. It can’t be distinguished from an expensive designer one, just believe me. And if you don’t believe it, see for yourself.

To create a floor vase from cardboard with your own hands you will need:

• Cardboard tube (can be taken from under a linoleum roll);
• Thin cardboard;
• Hot melt adhesive;
• Newspapers and egg trays for papier-mâché;
• Polymer putty;
• Fine sandpaper;
• PVA glue;
• Acrylic lacquer;

Stage No. 1

We attach the pipe to the cardboard base and draw a shape for the future vase. We make 30 identical templates and cut them out.

Stage No. 2

We glue the cardboard blanks to the pipe, distributing them evenly around the perimeter. Leave for several hours until completely dry.

Stage No. 3

We glue the base of the vase with pieces of newspaper sheets in several layers.

Attention: the layer of paper must be thick enough so that the voids are not visible during subsequent finishing.

Stage No. 4

Soak the egg trays in water, squeeze them out and mix them with PVA glue. Apply an even layer to the base and let dry.

Stage No. 5

Coat the vase with putty in an even layer. When the mass dries, smooth out the texture using sandpaper.

Stage No. 6

We decorate the vase. This can be easily done using spray paint of any color. On top you can finish it in the style of decoupage, stucco, or apply the ornament manually using acrylic paints.

Stage No. 7

Cover the surface with acrylic varnish and leave to dry.
That's all the tricks. DIY floor vase made from papier-mâché and cardboard is ready. Enjoy!

Floor vase made of pipe

Everything is quite simple here. If after renovation you still have unnecessary plastic or cardboard pipes at home, do not rush to throw them away, it is better to make a wonderful vase out of them.

A stylish DIY floor vase made from a pipe is easy, practical and beautiful.

Simply wrap a cardboard or plastic pipe in newspapers, securing them with PVA glue, paint them white with acrylic paint and decorate.

Idea: to decorate a floor vase made from a pipe, use old nylon stockings. Soak them in PVA, squeeze them thoroughly, and then put them on the prepared pipe. Distribute over the entire area, creating curly folds. Let the workpiece dry, and then paint and decorate to your liking.

DIY floor vase made from newspaper tubes

The now fashionable technique of weaving from paper wicker allows you to create lovely crafts from waste material.

In order to make a chic wicker floor vase with your own hands you will need:

• Newspaper tubes (about 400 pieces);
• PVA glue;
• Scissors;

Stages of work:

1. We make a 4x4 cross braid, then secure it with one tube around it. This will be the basis of our future vase. Next, we perform seven rows of regular circular weaving around the base, gradually spreading one tube at a time.
2. After this, we begin to remove the walls of the vase, bending and weaving in the previously separated tubes. Moving up, we gradually expand the space of the product up to 22 rows inclusive.
3. Then we weave about ten rows evenly without spreading, and coat the product with varnish.
4. Then weaving continues, narrowing the rows and tilting the tubes inside the product until about 72 rows.
5. We expand the neck of the vase over 12 rows and complete the weaving by creating sides in 3 rows. We cut off the remaining pipes.
6. Cover the product with a thin layer of PVA and wait until it dries completely. Then comes final stage finishing - varnish coating. This should be done several times in a row.

DIY floor vase decor

There can be a lot of options for decorating a floor vase, the most trendy of them are: wrapping with twine, decorating with glitter, silicone glue, as well as good old decoupage.

Of course, the vase should be decorated in accordance with the style of the room; the method of its external decoration will depend on this.

Well, since we already have a beautiful vase ready, we can think about what to fill it with.

Please note that not all types of homemade masterpieces are suitable for living bouquets, which means we will also make flowers for floor vases with our own hands.

Creating artificial bouquet, use the most common tree branches. It looks very beautiful and natural. At the same time, for greater harmony with the bouquet, an eco-style vase does not even need to be painted.
Attaching balls from leftover knitting threads to branches is an excellent and economical option for needlewomen.

Anyway, decorative branches for floor vases with your own hands already long time do not go out of fashion. So feel free to use them to decorate your own home.

No matter how fashion changes, handicrafts are always in trend. Remember that you can create masterpieces from the simplest and cheapest materials design art. The most important thing is imagination and a creative approach to business.
A DIY floor vase is easy, beautiful and stylish. Get creative and get inspired.

Good luck!

DIY floor vase: secrets, techniques and unexpected decisions updated: April 23, 2018 by: dekomin

My deepest bow and deep gratitude to the author of these works - Nadezhda Tkachenko! Look what beauty can be made from a linoleum pipe, cardboard and a mass of papier mache! Wow....

A small useful digression for everyone who is interested traditional medicine, herbal medicine, Chinese medicine and everything that can support and restore health. I invite you to look at the website "Snadobie.com - nature's recipes" http://snadobie.com. Here you will find a lot of interesting things about apyrotherapy, learn about treatment with bee venom and other bee products. Here: eye treatment with decoctions, the benefits of chiropractic care, flower medicines, light therapy and much more. Very useful site!

It all started with the fact that construction market I asked for a linoleum pipe. The sellers were of course surprised, asked why they gave it to me and gave it to me. My son-in-law grumbled all the way that if traffic cops spotted us with pipes sticking out of the car windows, then these pipes would cost me dearly. But nothing, we got home safely and I began to implement my long-time wish.

We take a cardboard tube (from a roll of linoleum), saw off the length we need (mine is 65 cm). We thought about the form, I immediately drew a blank on cardboard.

I cut out many, many such blanks. The bigger, the better. This is perhaps the most unpleasant moment in the whole work. I rubbed a callus on my hand with scissors.

Glue the pipe to the base. For the base, it is better to use fiberboard rather than cardboard. But I realized this in the process.

I glue the blanks around the entire perimeter with hot glue.

Now we cover it with newspaper strips. PVA glue.

When everything has dried, I coat it with a lot of papier-mâché.

I level and smooth.

I dried it for a couple of days near the radiator. Now I spread the putty (I have Knauf finishing), add a little PVA glue to it, and coat the vase.

After drying, sand the skin with a sandpaper. We repeat this procedure until the vase becomes even and smooth. I oiled and sanded three times.

I'm starting to decorate. Paper art is perhaps my favorite technique here. I never tire of thanking Tatyana Sorokina for her. stranamasterov.ru/node/308701?c=favorite. The athletes were sculpted from Keraplast, a self-hardening plastic mass. The top and bottom were covered with millet and peas.

Painted it with black paint. Well, then I coated the whole thing with gold.

I pasted napkin motifs onto this vase. First, of course, I primed it and covered it with white acrylic. The pattern is putty + PVA.

I found this tube in the medicine cabinet and used it to apply the putty. Acrylic paint I finished it, went over the patterns with bitumen, and wiped it with a cloth moistened with white spirit. Covered with four layers acrylic varnish, with intermediate sanding of the entire surface.

Well, here - already with a bouquet.