Multilift mss 11.12 instruction manual. Drainage and disposal of domestic wastewater

New Sololift+ specially designed for the collection and disposal of wastewater in private homes. Sololift+ Suitable for bathrooms, showers, utility rooms and kitchens. It is intended for use where wastewater cannot be drained by gravity into the sewer system. Bathroom and toilet where you need it Installation Sololift+- It is not simple pumping station, she gives you ample opportunities layout of your home. With it you can easily arrange a bathroom, kitchen or utility room anywhere in the house - even where it was previously impossible. Installation Sololift+ makes it possible to save significantly: Now there is no need for expensive work on laying large-diameter sewer pipes, which were previously necessary when installing a new bathroom or other plumbing room. GRUNDFOS offers you six models The lineup Sololift+ consists of 6 models, each of which is designed to perform its own tasks: drainage of wastewater from the toilet and/or one or more other household sources of wastewater such as sinks, bidets, showers, dishwashers, kitchen sinks, washing machines and etc. > Sololift + CWC-3 - for wall-mounted toilet, washbasin and shower enclosure > Sololift+ WC - for one toilet > Sololift+ WC-1 - for toilet and washbasin > Sololift+ WC-3 - for toilet, washbasin, shower enclosure and bidet > Sololift+ C -3 - for washing machine and kitchen sink> Sololift+ D-3 - for shower cabin and washbasin

DRAINAGE AND REMOVAL OF DOMESTIC WASTE WATER

In the life of the owners country houses Situations often arise when it is necessary to urgently pump out clean or contaminated water from filled containers - for example, to get rid of the consequences of a spring flood that has flooded a drainage well system, or to drain a pond or swimming pool. It is most convenient to solve such problems using small-sized submersible pumps KR, KC and AP. These pumps, depending on the model, are designed for pumping domestic wastewater of varying degrees of contamination. They are compact and easy to operate and install; they can be used for stationary work or transported from place to place. For automatic switching on and off depending on the water level, the pump can be equipped with a float switch. The built-in thermal switch protects the electric motor from overheating. The pumps can be used for many years without any maintenance. It is only necessary to clean them from the dirt accumulated inside. In pumps KP, KC, AP 12, AP 35, AP 50 For cleaning, it is possible to remove part of the base casing.

AUTOMATIC PUMPING OF CONTAMINATED WATER

If it is necessary to forcefully drain contaminated water from the kitchen, bath, washing machine, installation LIFTAWAY will help you solve this problem. These devices are a compact collection tank in which water is pumped out using a pump KP 150, KP 250 or AP 12. Its operating principle is simple: first, the installation tank is filled with water, and after it is filled, the float device turns on the pump, and the wastewater is pumped into the local sewerage system. Device LIFTAWAY C designed for floor or wall mounting, and has five connections for water supply. In contrast, the model LIFTAWAY B installed under the floor. The water supply can be carried out through three pipes located on the side or on top through a cover mounted flush with the floor. The pump is not included in the installation and is supplied additionally. PUMPING UNITS FOR PRESSURE SEWERAGE With the help of pressure sewer systems, individual houses or the entire village are connected via pressure water pipelines to the nearest central sewer network. Wastewater is not discharged by gravity, but under pressure without the risk of clogging the pipelines. Therefore, much smaller diameter pipelines can be used. This significantly reduces the cost of laying pipelines, and local treatment facilities are not required at all. For pressure sewerage, GRUNDFOS offers you ready-made, fully equipped pumping stations Multilift and Liftstation. The pumping station is a storage tank made of corrosion-resistant polymer material, one or two submersible pump with pipelines and fittings. The station is fully automated, operation control is carried out using a control cabinet. The pump size is selected depending on the required parameters (flow and pressure). Compact and completely sealed stations Multilift Designed for installation in basements of buildings. Liftstation- pumping stations for outdoor installation, equipped primarily with pumps APG with cutting mechanism.

Our company offers a wide range of GRUNDFOS pumps for:

drainage, sewerage, pumping of contaminated water and domestic wastewater;

circulation hot water in heating and hot water supply systems;

circulation in air conditioning and artificial refrigeration systems;

increasing pressure, pumping various liquids into technological processes;

automatic pressure boosting units;

pumping water from wells, irrigation, lowering groundwater levels;

water supply for individual houses;

dosing (uniform supply of reagents) in industrial processes and systems water purification, swimming pools;

taking water samples.

Almost all of our facilities are equipped with modern GRUNDFOS pumping systems for water supply and sewerage. With the help of pressure sewers, individual houses or the entire village are connected to the nearest sewer network. Wastewater is not discharged by gravity, but under pressure without the risk of clogging the pipelines. The use of smaller diameter pipelines significantly reduces costs. For pressure sewerage, we offer ready-made, fully equipped pumping stations such as Multilift and Liftstation. A pumping station is a storage tank made of polymer material, one or two submersible pumps, pipelines and fittings. The station is fully automated, operation control is carried out using a control cabinet. The pump size is selected depending on the required parameters (flow and pressure). SEG sewage pumps equipped with a cutting mechanism can be used for pumping wastewater. For special operating conditions, pumps can be supplied in explosion-proof versions. The VODNIK company also presents the entire range of GRUNDFOS submersible sewage pumps from 1.65 to 29 kW. Installation of such pumps can be carried out either in a stationary submerged position on an automatic coupling, in “dry” operation, or in a submerged portable version. GRUNDFOS wastewater pumps offer the highest efficiency throughout their entire lifespan. They are economical and reliable thanks to the use of modern technologies. Advanced solutions, such as the ability to adjust the impeller clearance externally, Smart Trim, reduce operating costs. GRUNDFOS pumps, both SuperVortex and ducted, have a non-clogging impeller design, which ensures very long service life with liquids containing solids. This guarantees maximum service life and reduces maintenance costs. Channel pumps are designed for continuous operation in the most severe conditions. In addition to the industrial line, VODNIK presents pumping equipment for individual houses. Household GRUNDFOS pumps ensure uninterrupted, virtually silent operation. Three-inch well pumps of the SQ series are economical, reliable, and have high consumer quality due to their unique design features. They don't require additional devices protection against dry running and are able to operate with significant fluctuations in the electrical network. The Alpha series circulation pumps are configured so that their parameters are suitable for the heating systems of almost all private houses. The pump rotation speed automatically changes depending on the demand of the heating or hot water supply system. Energy savings reach 60%! Drainage pumps of the KR, AR series made of stainless steel with a level sensor do not require any maintenance.

http://vodnik.usp.ru/catalog/32/34/68

Set up a bathroom where you want it.

Sometimes it can be difficult, and sometimes impossible, to equip a bathroom or bathroom where you want. The sewer riser is too far from the place where you plan to install a bathroom, or it requires installation below the sewer level (for example, when placing a shower or toilet in the basement), or it is not possible to install sewer pipes large diameter... But there is a way out, thanks to sewage grinder pumps, you can install plumbing fixtures where you want, without carrying out expensive civil works.

Created in 1958 in France, the SFA company revolutionized the plumbing market by releasing a grinder pump that allows you to equip a bathroom or toilet in any part of a building, country house or apartment. Currently, there is a large range of grinder pumps from different manufacturers on the Russian market. Depending on the model, these units crush waste and pump used wastewater up to 100 m horizontally or up to 10 m vertically, transporting it through a small diameter pipe to a remote sewer or septic tank. Now you can redevelop the premises without being tied to the existing sewer riser.

Now let’s look at what grinder pumps exist and what tasks each model performs.

The largest group of grinder pumps are pumps connected directly to the toilet. They are a small box that is mounted behind the toilet pedestal and is practically invisible. Pumping occurs automatically when the toilet is flushed. Sewage enters the pump, is crushed, after which it is transported under pressure to the sewer riser or septic tank. The entire pumping process takes place through a thin (diameter from 23 to 32 mm) pipe, which is hidden in the wall behind drywall and tucked under suspended ceiling or poured into concrete floor screed. Depending on the model, either one toilet or a toilet, sink, bidet and shower can be connected to the pumps of this group. The grinding mechanism of all pumps easily copes with feces and toilet paper, but not intended for more solid waste.

The SANIBEST® model from the above-mentioned SFA company, due to its design, is intended for equipping bathrooms in public places. This model can be connected to a toilet, shower, washbasin and even a washing machine or dishwasher, which discharge water at very high temperatures. A powerful knife made on the principle of a meat grinder copes even with hygiene and contraceptive products. In addition, the pump is equipped with a carbon filter that captures unpleasant odors.

To save space, you can use combined models, which are a regular toilet without a tank, with a grinder pump built into the pedestal. Pressing the pneumatic drain button turns on the suction and grinding of sewage. The motor drives the cutting mechanism, which shreds both feces and toilet paper equally well. It is possible to connect a sink.

Built-in grinder pump for wall-hung toilet - perfect solution for small houses where everyone square meter on account. Since the pump is only 12 cm wide, it can be placed directly in a plasterboard partition.

Small size models (296*162*144 mm) - specially designed for shower rooms. They do not have a toilet entrance, are very compact and can even be installed under a shower tray.

If you have a large family, then without washing and dishwasher difficult to get by. Manufacturers of sanitary pumps have provided for this. These pumps can be connected to: washbasin, bathtub, shower, bidet, dishwasher and washing machine, and kitchen sink. The maximum temperature of the water used is +70°. These models allow you to install the sink anywhere kitchen set, regardless of where the entrance to the sewer is located.

The largest and most powerful model is a mini sewer station designed to serve a cottage. You can connect to it both plumbing equipment and a dishwasher and washing machine. The mini-station works as a storage tank, collecting and grinding all the sewage and waste that flows into it. After all the waste has been processed, the pump sends it down the drain. The model is equipped with two motors - they turn on alternately depending on the load on the receiving tank. This allows you to significantly save energy (processing time) and extend the service life of the device. For greater convenience and safety of users, the developers have provided the ability to connect external sound and light alarms. If the pump malfunctions or becomes clogged, an alarm will sound and the pump will stop working.

Now you just have to imagine where it is possible to install comfortable and functional bathrooms in your home, and sewer grinder pumps and sanitary pumps will help make your dreams come true.

MULTILIFT pumping stations are designed for pumping wastewater that is below the level sewer system, facilitating their drainage into the sewer. The installation package includes pumps with reservoirs and a control cabinet to facilitate installation and minimize operating costs.

Pumping units provide simple solutions to complex problems.

MULTILIFT pumping units are available different sizes from small (MSS) for single-family houses to large (MD1) intended for large buildings. All MULTILIFT units are designed based on the principles of compactness, simplicity and discreet installation.

These pump sets include a range of models from small single source pumps to twin pump systems with reservoir capacities ranging from 66 liters to 1,350 liters.

Application

The pumping unit collects wastewater below the level of the sewer system and ensures its discharge into the sewer system. They also eliminate backflow in the event of high level water in the sewer system.
For single-family houses and summer cottages, use MULTILIFT MSS or M pumping units. Apartment buildings and commercial or public buildings of any kind always require a twin pump system: it is recommended to use MULTILIFT MD, MLD or MD1/MDV.

Features and Benefits

• There are up to five motor sizes available for each tank size (M, MD, MLD);
• Ready-made units include check valves(MSS, M, MD, MLD);
• Less weight means greater ease of operation and installation (MSS, M, MD, MLD);
• Easy to use microprocessor with set values ​​for two different levels (MSS, M, MD);
• Two adjustable intake heights in one system (MSS, M, MD);
• Reliable operation of the microprocessor ensures control over the operation;
• High quality pressure sensor, non-contact wastewater and a separate high water level alarm;
• Flexible inlets using connectors or fittings.
  Option to order three DN100 main inlets with two additional inlets provides maximum flexibility
• Wide selection of tank sizes for each type of purpose: 66 – 100 – 120 – 270 – 450 – 900 and 1350 liters;
• Rounded tank bottoms, preventing sediment formation and reducing the level of residual wastewater;
• Sealed polyethylene material, providing impermeability to gases and odors; Non-synchronized Vortex impellers, passing solids up to 80 mm in size;
• Unique SE pump design for MD1/MDV (see SE pump data).

Technical characteristics MSS/MLD, M/MD

Supply: up to 58 m 3 /h
Head: 19 m
Free passage: 65 - 70 mm

Technical characteristics of MD1/MDV

Supply: up to 220 m 3 /h
Head: 30 m
Free passage: 60 - 80 mm
Temperature of the pumped medium: from 0 °C to +40 °C (short-term up to +60 °C)
Temperature environment: 0 °C to +40 °C
Tank volume: up to 450 l (1 or 2 pcs.)