New Year's wreath made of birch branches. Christmas wreath made of birch branches. Where to find willow twigs

I would like to bring to your attention a very easy to make wreath for Christmas and New Year.

Used for work:

birch branches;

wire;

beads for the Christmas tree;

New Year's toys;

figurine - an angel.

The secret of the wreath is that it is made from short birch branches. Many people know that you can weave a wreath from birch branches, but when they go for a walk in the forest, they cannot find long branches from which it is easy to weave a wreath.

Watch the video clip and it will become clear that a wreath can be made from short branches.

We connect the “bottom” of the first bundle with the “top” of the second and twist them with wire. We bend the branches into a wreath, overlap the ends of the bunches slightly on top of each other andalso twist with wire. Next we paint the wreath. I used a car silver spray paint. It dries very quickly. Next, we wrap the wreath with beads and hang it fromcurtain Thanks to the fact that he thick , decorations are easily held on it, nothing needs to be glued. I put on it is a figurine with an angel. Using paper clips I attached a ball to the top of the wreath, a star to the bottom, and hooked several toys onto the tulle nearby.

I will be glad if this idea is useful to you. I make wreaths immediately after a walk; if the branches have lain and dried out, they are better soak V hot water, then they will become again soft. I’ll write right away that I don’t break birch trees, I collect everything only from the ground! Here in winter strong wind and there are a lot of branches on the ground.

Decorative wreaths on entrance doors are becoming increasingly popular in our country. At the same time, the wreath is a symbolic decoration, because the circle means returning to the place of departure. Therefore the wreath on front door This is both a talisman capable of returning your loved ones to their beloved home, and a stylish seasonal interior decoration.

In order to make a wreath, you first need to think about the base and what material it will be made from. I will tell you how to make the base in two videos, which show in detail the process of creating and decorating a wreath. You can fantasize about different options decor: ears of corn, herbs, dried flowers, any natural or artificial materials.

The first video shows how to make a base from short branches. The video used birch branches, but you can use any thin branches that bend and can be secured with wire.

Photos of a finished wreath made from artificial twigs, which were attached to wire and were used mainly to show in detail final result. However, even in this condition the decoration can be hung on the door!

The second video shows how to make a wreath from long branches. Vine branches were used. To create such a base you won't need anything other than your hands and branches.

This wicker base can be hung on a door or wall without even decorating it.

And some photos for inspiration!

Creative mood and inspiration to everyone. Good luck!

Blog: http://vekoria.blogspot.com/

Wreaths made from birch branches are often used in floristry, creating interior compositions and home decorations. However, this decorative element is not so easy to find in florist stores. Fortunately, making a wreath with your own hands is not at all difficult; in today’s master class we will share with you step by step instructions making birch wreaths.

Necessary materials:

Birch branches

Small pliers

Black wire 0.65 mm

We go to the park to get birch branches. It is not necessary to cut them from trees; dry fallen branches will serve just as well. Especially now, in the spring, when it’s humid outside, the branches on the ground are a little wet and will form well into a ring. Choose thin flexible shoots up to 4 mm thick and 60-70 cm long.

Step 1. Let's make a ring. At this stage, you must decide on the diameter of your future wreath. The most popular sizes: 15 cm for decorations and decorations, 20 cm for table compositions, 25-30 cm for wall and door wreaths. According to the selected dimensions, form a ring from one long branch and secure it with wire using pliers.

Step 2. Prepare the remaining branches by trimming them to the same length and removing any too thick petioles. Then, using wires, one at a time, attach them by the base to the ring every 5-7 cm until the circle is closed.

Step 3. In a clockwise direction, with one movement of your hand, collect all the branches sticking out to the sides into a ring. If you are making a small wreath, then just grab them with a wire in one place (the final result is in the photo), but if the wreath is large, then additionally wrap it with wire in a spiral, keeping a wide step with the same angle of inclination.

This is how easy it is to do birch wreaths. Having a sufficient number of branches in stock, you can make wreaths in just a few minutes different sizes for home and street. Children, by the way, also do an excellent job with this task; the wire can be replaced with twine.

Well, for inspiration, we offer a small selection of photographs.

Traditionally, Advent wreaths appear in homes in the run-up to Christmas. Most often they decorate doors and fireplaces, and any interior is filled with anticipation of the holiday. You can also decorate with a wreath on a satin ribbon large mirror in a wide frame, attach to a cornice and decorate curtains, or even use it to decorate a Christmas table by placing candles inside the wreath.

I have already talked many times about how you can doChristmas wreath with my own hands, because this topic is relevant for me - there are no Christmas trees here. And that’s why the wreath is a real lifesaver.

So today I will tell you how to make a Christmas wreath from twigs. Make one like this wreath very simple. It does not require any special decorations. All the necessary elements can be found in the park during a walk. The basis of the Christmas wreath is flexible birch branches, and the decoration is various cones, nuts, and twigs. These branches are thin, flexible, roll well into a circle and do not break. Additionally, you can decorate with small Christmas balls for contrast.

So, let's go to the park (or forest) and collect branches. You can collect everything “that is in bad shape”: birch, willow, any shrubs and trees even unknown to you: o). Of course, you don’t need to pluck a bush clean, a couple of branches from one tree and to the next. We love nature! Take branches that are not thick, but not too thin.

Before you start creating, you need to keep in mind that cut rods dry out quite quickly and become unplastic, so if you decide to make a wreath with your own hands, you should not put it off for long.
At home, we collect all the branches into one neat bundle and tie them up. We place our creation in the bathtub or wherever you don’t mind (what if you have a gold-plated bathtub: o), fill hot water. And let's go have tea... For about an hour.

After this you need to twist the wreath. There are several options here:

Method 1. Make a wire frame and wrap it with rods. However, we still need to find the wire :o)

Method 2. If you did not pre-soak the branches, then before forming a circle from the twigs, each branch must be bent over every 5 cm, otherwise it may break during work.

We form a circle from one long branch.

Then, holding the woven ends of the first branch and the beginning of the second in one hand, we braid the first circle with the other. And so on, branch by branch. Gradually the branches begin to hold on to each other.

After the branches are all twisted, take water-based paint(for example, matte for interior work, almost no smell and dries quickly) or acrylic paint. When painting the wreath, use a dry brush with a small amount of paint on the tip.

We cover our wreath with paint. Let it dry. Then, for added beauty, we spray it with gold paint from a can (sold at a hardware store or at a car dealer).

That's it - the hardest part is over! You can decorate the finished wreath satin ribbons, beads, Christmas decorations, bells, felt figures, birds, decorative flowers and even gingerbread cookies.

You can hang it from ribbons from the ceiling (if you have something to tie it to), on a nail to the wall or on the door.

The wreath, of course, doesn’t have to be painted.

Method 3. And if you also managed to collect pine cones in the forest, then you can decorate the wreath in this interesting way.

For this we need: birch branches; various cones: pine cones, larch cones (you can also use medium-sized spruce cones, acorns), walnuts, dried cracker branches ; glue gun or some silicone glue in a tube; silver paint in a can; small Christmas balls; satin ribbon; two bells.
The cones must be dried on a radiator so that they open.

Take several branches, form a circle and tie their ends. We fold the birch branches into a bundle of such thickness that the bundle is completely covered by the palm. We fasten the bundle in the middle with a strong thread. Then we fasten again after 10-15 cm - and so on in a circle. At the end, we overlap the branches over each other and fasten them with thread.
Wind the remaining branches from above. Those. wrap around an already made frame of branches in a circle. We tuck the ends into the branches themselves (like the end of a thread in a ball). It turns out like this rim from birch branches.

We distribute the decorative elements along the base and create a composition. There is no need to glue it yet, as you may want to change the order decorative ornaments

Once you are finally sure that the composition is finished, you can start gluing.

Before you make the base for a wreath with your own hands, you should decide what materials are in walking distance and are not classified as expensive. A variety of materials can be used as the basis for a wreath.

DIY Christmas wreath

Before you make a wreath of branches with your own hands, it will be useful to know what is most suitable material are willow, birch, oak, etc.).

DIY Easter wreath

Young flexible branches (the bark of willow trees can be peeled off) are twisted into a ring and secured with wire, fishing line or rope. The base must be left to dry for several days. Once dry, the branches will retain their ring-shaped shape. Before you make a wreath of twigs with your own hands, you can choose various diameters circles and form blanks of different diameters.

Straw base.

The straw also needs to be rolled into a ring and secured with wire or fishing line.

Straw base
Wire base

Wire base.

For such a base, it is advisable to use thick wire or wire folded in several rows.

Cardboard base.

Any thick cardboard will do. Cut a circle of the desired diameter from cardboard with a hole in the center. For strength (especially if you use corrugated cardboard), cut out 2 circles and glue them together.

Cardboard base
Foam base

Foam base.

Sold ready-made, of different diameters in craft stores. There is a base for double-sided wreaths (you can decorate both sides) and a base for a wreath, where only the top part is decorated.

To create a wreath, you can use a floral ring-shaped base of piaflora for dried flowers or an “oasis” for living plants.

The porous structure of these materials helps to hold decorative elements on the wreath.

Piaflora base
Wicker willow wreath

Wicker willow wreath.

These wreaths (of different diameters) can be purchased at craft stores. These basics are beautiful in themselves; one bright decorative element is enough to decorate them.

Base from newspapers.

Several newspapers are rolled up with a roller and a ring is formed, everything is fixed with tape. This base has a “non-marketable” appearance, so it needs to be decorated with something on top, for example, covered with fabric.

Newspaper base
Construction foam base

Draw a circle of the desired diameter on a piece of paper, then carefully squeeze the foam out of the can and let it harden. Excess hardened foam can be cut off sharp knife. From one balloon, several bases are obtained at once, which can be decorated with fabric, sisal or moss.

• If you are making a light, airy wreath, then choose a base that is not very heavy. Opt for a wire or twig base.
• For a solid, heavy wreath, a stronger base is chosen. Here it is better to use a foam base or one made from construction foam.

Before you make a decorative wreath with your own hands, you need to think about the options for its decoration, design style and overall design. Look around and you will see how much interesting materials around, which can be used to decorate the wreath. It all depends on your taste. Any materials are suitable for decoration, from leftover paper, wallpaper to... natural materials, which can be found on a walk: leaves of various trees, berries, fruits, acorns, cones, herbs, cereals.

Examples of how you can make an artificial wreath with your own hands without any financial costs:

• fresh flowers, plants, cereals, leaves, twigs with fruits;
• dry cereals and leaves, dry meadow grasses; A wide variety of decorative and wild plants. Cereals (wheat, oats, etc.) and various meadow herbs look especially beautiful in wreaths. There are many in various ways preservation of flowers and plants. Here are just a few of them: drying in natural state, in hanging form (herbs, cereals, buttercups, roses, etc.); drying in sand, silica gel (for example, the buds of some flowers are dried); drying in cotton wool, etc.
• dried flowers (lagurus, popularly called “bunny tail”, decorative yarrow, helichrysum, statice, amaranth, etc.), poppy boxes, mature echinacea inflorescences, decorative onion inflorescences, dried roses, etc.;
• sisal, coconut fiber, bast;
• pine and fir cones, acorns, moss, bark and various tree branches;
• remains of a beautiful wrapping paper, wallpaper, corrugated paper;
• various ribbons, braid, lace, sewing, beads, rhinestones, beads, etc.;
• buttons of various colors and sizes, wooden, cardboard and plastic elements (they are also used in decoupage and scrapbooking);
• artificial flowers, decorative fruits and vegetables, etc.

Basic tools that you may need for work

Basic tools that you may need for work

Glue gun and glue gun refills. This is a very convenient tool that makes decorating work much easier. With a gun you can glue anything to the base: twigs, herbs, flowers, fabric, paper, wooden elements etc.

Attention! Take precautions when working with a glue gun.

Wire. A stiffer wire is used to create a base, a softer one (wire that is used in beading or floral) is used for attaching decorative elements to the base.

Floral tape in various colors. This is a thin elastic tape in a reel with a slight adhesive effect. The tape is used in various types creativity: in quilling (paper rolling), when making flowers on wire, candy trees, beaded jewelry, etc. When using the floral tape, you should stretch it a little so that it sticks better to the stem. Under the influence of the warmth of your hands, the tape exhibits adhesive properties; it seems to stick to the surface. With its help, it is convenient to tie herbs, cereals, flowers, etc. into bunches.

Fishing line. It can be used to tie twigs into a wreath; in this case, it will be practically invisible, which means the wreath will look more aesthetically pleasing.

Household superglue for gluing small elements, such as rhinestones or beads.

Wire cutters.

Christmas wreath in the photo

See how to make a wreath with your own hands in the photos that illustrate this process step by step:

STEP #1
STEP #2