Expanded polystyrene extruded TechnoNIKOL xps carbon bikey. TechnoNIKOL XPS is extruded polystyrene foam. Line of pipe insulation segments xps

Product Description:

TECHNONICOL CARBON ECO extruded polystyrene foam is thermal insulation material with uniformly distributed closed cells.

XPS TECHNONICOL CARBON ECO does not absorb water, does not swell or shrink, is chemically resistant and does not rot. High strength allows you to get a flat and at the same time rigid base, which significantly increases the service life of the entire thermal insulation system.

Application area:

XPS TECHNONICOL CARBON ECO is used in cottage and low-rise construction for thermal insulation of foundations, roofs, floors, and insulation of facades.

TECHNONICOL CARBON ECO extruded polystyrene foam is one of the most highly effective thermal insulation materials. High strength and low thermal conductivity determine the popularity of the material in cottage and private house construction.

In the production of XPS TECHNONICOL CARBON ECO, nano-sized carbon particles are used. Nanocarbon reduces the thermal conductivity of the material and increases its strength. Thanks to the saturation with nanocarbon, XPS TECHNONICOL CARBON ECO boards acquire a light silver tint and have high energy efficiency.

Advantages

• Expanded range;
• Improved thermal conductivity;
• Biostability (resistant to insects and rodents);
• Not afraid of moisture;
• Does not shrink over time;
• Ecologically pure material
• Convenient and easy to use;
• High speed installation;
• Stable geometric dimensions;
• Service life over 50 years.

* - can be produced with compressive strength at 10% linear deformation above the values ​​​​indicated in the table, in this case the products are marked separately numerical value, characterizing the compressive strength of the slab in kPa (for example, 200, 250, 300, 400). In this case, the values ​​of all other indicators correspond to the values ​​​​indicated in the table;
** - thermal conductivity measured within 24 hours from the moment of product release;
*** - slabs of flammability group G3 are additionally marked with the RF index;
**** - slabs with a thickness of 80 mm or more can be produced using the ThermoBonding method;
***** - upon agreement with the consumer, it is possible to produce slabs of other sizes.

Manufacturing jobs:

TECHNONICOL XPS boards must be used in accordance with the requirements of the current building codes and rules.

Storage:

It is allowed to store TECHNONICOL XPS slabs under a canopy that protects them from precipitation and sun rays. When stored under a canopy, the slabs should be placed on pallets or stands or bars. It is allowed to store XPS TECHNONICOL slabs on outdoors in special packaging that protects from external atmospheric influences.

Transportation:

It is allowed to transport TECHNONICOL XPS slabs over a distance of up to 500 km in open vehicles with mandatory protection from exposure to precipitation and sunlight.

Packaging Details:

The boards are packaged in UV-stabilized film and delivered on pallets.

XPS TECHNONICOL CARBON ECO - perfect solution for insulation of your cottage. It does not absorb water, does not swell or shrink, is chemically resistant and does not rot. This is an excellent thermal insulation material for those who are looking for high-quality thermal insulation with high performance.

Thermal insulation material used for structures plaster facades, thermal insulation of socles. It can also be used for other structures where increased requirements are placed on the adhesion of thermal insulation boards to the base.

Thermal insulation material, which is bars made of extruded high-strength polystyrene foam with a section size of 50x50 mm and a length of 1180 mm. The bars are used to improve the energy efficiency of pitched roof structures.

CARBON PROF product line

XPS TECHNONICOL CARBON PROF – material for professional builders. It has high strength characteristics and has the best thermal conductivity coefficient in the XPS TechnoNIKOL line. XPS TECHNONICOL CARBON PROF is used for construction flat roofs shopping and logistics complexes, residential areas, foundations of any complexity, load-bearing roof structures, floors on the ground.

A professional thermal insulation material that is used in general civil and industrial construction for the construction of foundations, facades, plinths, roofs, floors, including load-bearing ones.

A set of ready-made thermal insulating wedge-shaped slabs that allows you to create slopes and slopes on the roof on a flat base, increase slopes during roof reconstruction, create a slope in the valley towards water intake funnels, at ventilation shafts and skylights, creating an additional slope to drain water from the parapet (counter-slope).

CARBON SOLID product line

TECHNONICOL CARBON SOLID extruded polystyrene foam is a thermal insulation material with evenly distributed closed cells for thermal insulation of loaded floors, thermal insulation of railways and highways. XPS TECHNONICOL CARBON SOLID does not absorb water, does not swell or shrink, is chemically resistant and does not rot.

High strength makes it possible to obtain a flat and, at the same time, rigid base, which significantly increases the service life of the entire thermal insulation system. XPS TECHNONICOL CARBON SOLID – material special purpose increased strength.

High-strength thermal insulation material, which is used as thermal insulation of the bases of transport structures, as well as in general civil construction when constructing foundations, operating roofs, loaded floors with increased requirements for the strength of the thermal insulation layer.

High-strength thermal insulation material, which is used as thermal insulation of the bases of railway structures. The material is specially designed to meet the special requirements for the construction of railway tracks.

Carbon Block Products

Modern technological material that meets all the requirements of road builders.

It is used as thermal insulation of transport structures, light embankments, as well as in general civil construction for thermal insulation of roofs, parking lots and other structures where increased thickness of thermal insulation is required

CARBONext products

Extruded polystyrene foam of the TECHNONICOL CARBONext series is used in general civil construction for thermal insulation of foundations, roofs, floors, including load-bearing ones, stylobates, and insulation of socles.

Line of pipe insulation SEGMENTS XPS

TECHNONICOL XPS half-cylinders and segments are used for thermal insulation of overhead, underground channel and non-channel pipelines.

TechnoNIKOL XPS is an extruded polystyrene foam, a heat-insulating building material with an evenly distributed cellular closed structure. The unique formula of the heat insulator has endowed the Technonikol XPS product with the ability to resist the process of water absorption, the material does not swell, and shrinkage is completely absent. Extruded polystyrene foam of the XPS brand does not rot, withstands chemical irritants, does not generate dust and does not support the combustion process.

TechnoNIKOL Corporation has 37 factories. Under its brand, it is constantly expanding its sales network; at the beginning of 2018 there were more than 185 branches in the countries of the near and far abroad the company has 33 representative offices. The use of TechnoNIKOL products, during the existence of the concern, made it possible to erect more than 200,000 buildings. The organization does not stop there; work is in full swing in the laboratories and design workshops: products are constantly being improved, new components are being developed to solve specific problems.

Created at the dawn of the 50s of the last century in the laboratories of the American corporation The Dow Chemical Company, extruded polystyrene foam today occupies a leading position among thermal insulation offerings in the world in terms of efficiency. construction market. Application is possible in all areas, from thermal insulation of foundations, roofing, use as flooring, protection of pipelines, and ending with preparing the base for the construction of railway tracks and highways.

The TechnoNIKOL trademark is recognizable far beyond the borders of our homeland; the company’s products based on extruded polystyrene foam are on a par with global brands in production sector thermal insulation. The unlimited use of TechnoNIKOL XPS expanded polystyrene is explained by its unique and worthy characteristics. Valuable properties were combined and the product turned out to be:

• environmentally friendly;
• biologically reliable, provides active resistance proliferation of microorganisms;
• with a low thermal conductivity coefficient (retains heat better);
• with high strength characteristics (does not crumble with or without a reason);
• service life and durability of use exceeds 50 years.

TechnoNIKOL XPS, the reason for the brand's success

(XPS) gained wide popularity due to its excellent and basic characteristics heat-insulating material, namely the thermal conductivity coefficient. Exactly this physical parameter, denotes the ability of the structure of a substance to transfer thermal energy (heat exchange) from more heated areas to less heated parts of the body.

Thermal conductivity coefficient of TechnoNIKOL XPS depends on the size and shape of the cells, as well as on the composition of the gas in the cells of the cells. Low thermal conductivity of the product guarantees high insulating characteristics. That is, the ability of the slab increases XPS reduce energy losses for support comfortable temperature in the building.

A low value is achieved by reducing each component coefficient in the total value of thermal conductivity coefficients, which includes: solid phase (solid) + foaming gas (r) + convective (k) + radiation (p) components.

λ = λtv + λr + λk + λp.

The share of the absolute value of λsol for extrusion is very small. Nevertheless, in the production of TechnoNIKOL XPS, a lot of effort is made to achieve the structure optimal size and cell shapes. For quality material this is a key indicator that determines strength and thermal insulation properties.

TechnoNIKOL XPS TECHNOPLEX

TECHNOPLEX - was developed mainly for use in private home buildings. It reveals its thermal insulation qualities well in the installation of “warm floors”, in measures for insulating balconies and loggias, in installing floor coverings on ground surfaces and in creating the foundations of cottages.

XPS TECHNOPLEX is widely used as a thermal insulation material in country houses. Distinctive feature XPS TECHNOPLEX is considered to be the use of nano-sized graphite particles in technological process manufacturing. Nanographite helps reduce the thermal conductivity of the product and increases strength properties. It is easy to recognize the product on the market by its characteristic light silver coloring, acquired as a result of filling the structure with nanographite.

Technical indicators of Technoplex:

Pros of Technoplex

• The financial benefit is achieved by better thermal insulation properties per m2, from the point of view of the comparative use of third-party products;
• Saves thermal energy 1.5 times more effective than traditional polystyrene foam and 2 times more effective than basalt and glass wool;
• Does not absorb moisture;
• Not subject to shrinkage;
• No formaldehyde resins;
• Does not assist rodents in organizing nests;
• Ease of installation is determined easy to use and helps to increase the speed of finishing work;
• Stable performance indicators are maintained throughout the entire period of operation;
• Thoughtful packaging ensures easy transportation and loading and unloading.

TechnoNIKOL XPS CARBON ECO

CARBON ECO - has found wide use in the private sector of low-rise households. Used in thermal insulation of foundations, roofing, flooring, and insulation façade structures.

TechnoNIKOL XPS CARBON ECO is part of a series of thermal insulators with increased efficiency parameters. Excellent strength characteristics combined with reduced thermal conductivity are a consequence of the growing popularity of using slabs in low-rise and private construction of buildings.

A distinctive feature of TECHNONICOL XPS CARBON ECO The use of nano-sized carbon particles is considered. Nanocarbon helps reduce the thermal conductivity of the product and increases strength properties. Saturation with nanocarbon gives TECHNONICOL products XPS CARBON ECO lightened tone with a silver tint. High energy efficiency values ​​are expressed in the following technical characteristics:

Benefits of CARBON ECO

• Wide assortment list;
• Reduced thermal conductivity;
• Reliable product from a biological point of view (does not attract mice and ants);
• Moisture resistant product;
• The slab does not shrink, the geometry of the values ​​is stable throughout the entire period;
• Environmentally friendly product without formaldehyde.
• Easy to use;
• Fast installation activities;
• Operation is defined as 50 years or more.

Brief overview and differences of TECHNONICOL XPS CARBON

XPS TECHNONICOL CARBON ECO SP

Unique on domestic market product specifically created for the device standard solutions foundations according to the type “insulation with a Swedish stove”. The successful use of TechnoNIKOL Carbon Eco in creating a foundation is determined by the rapid construction of the structure and the increased strength properties of the product:

• Compressive strength of 2 percent linear distortion within 200 kPa.
• The bending rigidity is 300 kPa.
• In addition, the product shows high thermal conductivity.

TECHNONICOL XPS CARBON ECO FAS

The specially milled surface CARBON ECO FAS has become the answer for complex facades with. Thermal insulation boards with milling are also used in the basement parts of buildings and other similar structures where it is necessary to ensure high-quality adhesion of the TechnoNIKOL XPS board to the wall plane.

A specially prepared report from the company’s experts covers in detail the technological aspects of surface preparation and further development. Video review will help put all the dots in place and teach novice installers the rules and regulations for performing the sequence of work with TechnoNIKOL XPS material:

TECHNONICOL XPS CARBON PROF

Widespread use in civil construction:

1. Measures for insulation and insulation of the foundation;
2. Roofing, including load-bearing structures;
3. Flat roofs of swimming pools, stadiums, trade halls and logistics warehouses;
4. Floors, among others, with load-bearing capabilities;
5. Insulation of loggias, facade structures, basement floors;
6. and etc..

In almost all systematic decisions, the manufacturer recommends adopting the products of the TechnoNIKOL XPS CARBON PROF line, promoting the material as insulation for professional builders. TechnoNIKOL Carbon Prof has high strength and the lowest thermal conductivity coefficient.

The XPS CARBON PROF series has a special set of beveled TechnoNIKOL XPS CARBON PROF SLOPE panels, in order to give a slope and make a flat roof pitched.In general, the industrial series is characterized by ultra-high strengthand a minimum value of thermal conductivity. It is these parameters that have determined the popular practice of widespread use of the material in the general civil and industrial complex.

TECHNONICOL CARBON SAND MON

Represents extruded polystyrene foam insulation panels intentionally designed for the purpose of being an internal core filler in the sandwich panel industry, as reflected in the name SAND. The demand for sandwich panels is due to the simplicity of installation, the products are easy to cut, processing is possible on machines in order to obtain the required dimensional dimensions.

In production CARBON SAND MON additives are used, the resulting structure, when cutting the product on a string machine, does not create consequences expressed in the material being translucent through. TechnoNIKOL XPS CARBON SAND MON is widely used in monolithic buildings.

TECHNONICOL CARBON SAND PVC

Repeats technical and physical properties slightly higher than the material considered, with the exception of a special filler in the component structure that allows the use of CARBON SAND PVC with a greater degree of efficiency as part of filling the inner core of thermal insulators of PVC sandwich panels.

TECHNONICOL XPS CARBON SAND VAN

The expanded range of applications is characterized by the use of the material in automotive vehicles of the civil and military industries. Sandwich panels of the TechnoNIKOL XPS CARBON SAND VAN production cycle are manufactured for the purpose of arranging an isothermal container. Refrigerator wagon and body, all vehicles cold-preserving purposes cannot be done without CARBON SAND VAN.

TECHNONICOL XPS CARBON SOLID type A and type B

Both types are XPS with equal distribution of closed cells. Type A and Type B are the same:

• Waterproof;
• Do not swell from exposure to water;
• Shows no shrinkage;
• Wear-resistant, neutral in chemical influences product;
• They do not support putrefactive processes and do not decompose.

Increased strength indicators are successfully used in the preparation of a flat and rigid foundation for any purpose. Type A for the most part used in the civil sector of construction sites, usually these are:

• thermal insulation of foundation blocks and fills
• installation of roofs with subsequent operation,
• industrial floors subject to load,
• in addition, as part of the production of thermal insulation layers in the base of road surfaces.

CARBON SOLID type B

Meets the requirements of the Russian Federation Certification according to the indicators " Technical instructions the use of expanded polystyrene and geotextiles while increasing the density of the main construction site of the roadbed in the absence of removing the rail and sleeper grid.” Totally coincides " Reference manual the use of polymers in strengthening earthen coverings during the organization of repairs over communication routes.” In other words, TECHNONICOL XPS CARBON SOLID type B has important tasks and functions in creating heat-insulating layers in railway bases.

Extruded polystyrene foam TECHNONICOL CARBON ECO DRAIN

As we know, the translation DRAIN means drainage ditch. The manufacturer offers to builders slabs structurally supplemented with drainage grooves. Functional purpose TECHNONICOL XPS CARBON ECO DRAIN is determined by the following capabilities:

• Convincing thermal insulation properties;
• Creation drainage systems to counter precipitation or groundwater;
• Ventilation ducts on flat and sloping roof surfaces.

TechnoNIKOL PIR

For the “sweet”, let’s look at newest product which is based on polyisocyanurate foam. According to laboratory staff, the next generation of PIR boards have a unique, structured cellular texture. The design of the plate looks like a “sandwich” in the core of which there is polyisocyanurate foam on both sides glued with special layers of foil. Based on cells with a closed structure and a foil layer lining, PIR boards turned out:

• Perfectly with waterproof coefficient;
• Do not burn and do not support combustion, resist flame;
• Allows repeated mechanical loads;
• They have a record low thermal conductivity coefficient.
• PIR products remain with unchanged factory parameters after 50 years of operation.

Advantages of PIR TechnoNIKOL:

Since PIP boards are expected to be widely used in roofing, let's look at some of the advantages of the new approach. The manufacturer on the official website declares guarantees of energy efficiency and durability:

1. PIR materials do not change their dimensional geometry throughout their entire operation - they do not settle under the pressure of static or dynamic stress load;

2. New generation PIR heat insulator with no water absorption. TechnoNIKOL PIR simply contains 95% closed cells with rigid structure fixation.

Excellent waterproofing qualities and durable base:

1. Compressive strength indicators from 120 kPa;
2. Tests of 30 load cycles showed a loss of strength of no more than 0.5%;
3. The risks of damage to the waterproofing layer during installation are minimized.

The material is assigned a flammability value (G1), with this indicator installation is permitted roofing directly on the profiled steel deck. No limitation on surface size. Without strengthening protective measures against fire. The surface will not require the construction of fire barriers. TechnoNIKOL PIR does not support combustion processes; moreover, thermal insulation serves as a kind of protection for other layers of the roofing system.

Rumor has it that PIR is the best proposal for the global industry and the product is behind the main development of future building materials.

XPS Carbon from TechnoNikol is a series of thermal insulation boards made of extruded polystyrene foam, which you can buy at a good price from Euromet. Materials provide effective insulation buildings and structures are widely used. Among their advantages are profitable price, excellent characteristics and convenient use.

1. Increased thermal insulation efficiency compared to standard materials.
2. The material is completely safe from an environmental point of view. It does not release toxic substances. Absolute environmental friendliness makes both installation and operation of the insulation safe.
3. Long service life - over 50 years.
4. able to withstand increased loads without deteriorating performance.
5. The insulation practically does not absorb moisture. Thanks to this, the quality of insulation does not decrease over time.

In the production of XPS Carbon series insulation, a special recipe is used. It contains graphite nanoparticles. Thanks to this, extruded polystyrene foam acquires increased strength. The surface of the plates is milled. This simplifies further finishing work.

The thickness of various insulation materials required to achieve the same level of thermal insulation

XPS Carbon Series: Types of Extruded Polystyrene Foam

XPS Carbon ECO. Designed for private homes. Protected from water absorption and has excellent thermal insulation properties. Does not change shape or size, does not swell during use. It is resistant to both chemical substances, and to rotting. The color of the plates is silver, which is due to the content of graphite nanoparticles in the raw material. Thanks to it, excellent heat transfer resistance and increased strength are provided.

XPS Carbon PROF. Thermal insulation from TechnoNikol for use in professional construction. The density and weight of the material are reduced, but at the same time it is very durable. Purpose: insulation of floors built on the ground, foundations, flat roofs. Recommended for use in the construction of shopping and logistics centers. The series also produces a set of XPS CARBON PROF SLOPE slabs. With its help, you can create the required slope when insulating flat roofs. Various tilt angles are available, from 1.7 to 8.3°. The materials in the XPS Carbon PROF series are characterized by improved thermal insulation and strength properties due to the content of graphite in the raw materials in the form of nanoparticles.

XPS Carbon SOLID has increased strength, is characterized by excellent thermal insulation properties thanks to the content of graphite nanoparticles. It is used for loaded floors and foundations of general civil objects. Also recommended for use on objects transport networks(railway car roads, airfield runways, etc.).

XPS Carbon SP. Insulation is also called " Swedish stove" With its help, you can quickly equip a foundation with a subfloor with a heating system in it. The solution is used for insulating monolithic foundations with simultaneous laying of communications (including “Warm floors”).

XPS Carbon ECO Drain used if it is necessary to additionally insulate the foundation base. Allows you to arrange wall drainage, improve the outflow of moisture, and provide micro-ventilation of flat roofs.

XPS Carbon ECO FAS designed for plinth parts plaster facades. The plates have a milled surface, which increases adhesive properties. Can be used for insulation various designs in cases where it is important to ensure high-quality adhesion between the insulation and the insulated surface.

XPS Carbon PROF SLOPE RF is unique on Russian market decision. They are wedge-shaped slabs supplied in ready-made sets. Purpose - insulation of roofs with the installation of the required slope on a flat base. When arranging and repairing roofs, it allows you to increase the slope angle, change the direction in which water flows, create slopes in the valley areas, additional slopes along the perimeter of the roofs at the parapets for moisture drainage, slopes in the places where ventilation outlets and light domes are installed.

XPS Carbon SAND– filler material for sandwich panels. Can be used with panels to create insulated enclosing structures. The solution was developed specifically for sandwich panel manufacturers and can be used with various types of panels.

Fasteners

1. Fasteners “TechnoNikol” No. 01, No. 02. Fastening elements are made from HDPE. Purpose: installation of XPS series materials. Structurally, it is a spike installed on a flat area. The tenon has teeth, with the help of which fastening is carried out in thermal insulation board. The pads are covered with an adhesive layer. This layer is protected by a film containing silicone.

2. Telescopic fasteners “TechnoNikol”. Material - polymer raw materials, stabilized to maintain strength for maximum life. Structurally, the fastening element is a tubular rod (diameter 10 mm), narrowed at one end. At the other end, the rod is combined with a flange with a diameter of 50 mm.

3. Self-tapping screw “TechnoNikol”. Self-tapping screws are used to complete the plugs for passage elements, ventilation outlets, and other disc-shaped elements. Material - steel C 1022 (hardened, carbon). For corrosion protection, ELECTROPOLYSEAL® coating (manufactured by PPG Industrial Coatings, USA) is used. The diameter of the screws is 4.8 mm.

Certificate of official dealer of TechnoNIKOL