C8 corrugated sheets - technical characteristics, description, price. Requirements for geometric accuracy

Corrugated sheet C8-1150 is one of the most universal profiles, widely used in modern construction. C8 corrugated sheet is the most economical corrugated sheet; it is used as a wall facing material, as well as for the construction of fences and installation suspended ceilings. Despite the fact that it load bearing capacity relatively small, galvanized C8 corrugated sheets are often used for installation roofing coverings pitched roofs with an inclination angle of more than 30-40°.

C8 wall corrugated sheeting - appearance

Production of C8 corrugated sheets: main dimensions and quality requirements for finished products

C8 corrugated sheets for fences and roofing are made by cold rolling in accordance with GOST 24045-94 and TU 1122-079-02494680-01 from thin sheet steel, with a thickness of 0.5 to 0.7 mm. The following raw materials are used:

1. Cold rolled steel coils grades 01 and 220-350 according to GOST R 52246-2004 with zinc protective coating according to GOST 14918.
2. Galvanized steel with polymer coating according to GOST R 52146-2003 and steel with paint coating according to GOST 30246.

The line on which galvanized C-8 corrugated sheets are produced includes the following equipment:

• an unwinder on which a roll of sheet steel is installed;
• forming machine (often called a rolling mill);
• guillotine shears;
• receiving device;
• oil station;
• remote control with automatic control system.

The entire production process is fully automated; the function of shift personnel is to control the production process and monitor the operation of the equipment.

Profiled sheet S-8 – profile dimensions

Profiled sheet c-8 has a surface with corrugations in the form of trapezoids with a height of 8 mm, a base width of 62.5 mm and a distance between corrugations of 52.5 mm. On modern rolling mills producing C8 corrugated sheets, sheet sizes finished products can be from 0.5 to 12 m.

The standard regulates the following requirements for the characteristics of metal profiled sheet C8:

1. Corrugated roofing sheet C8 on the front side may have minor abrasions and damage that do not affect the integrity of the protective coating.
2. Profiled sheet S-8 may have the following deviations: profile height ±1.0 mm, sheet width ±8.0 mm and sheet length ±10.0 mm.
3. The corrugated sheet for the S-8 fence should not have a crescent shape of more than 1.0 mm per 1.0 m of profile length for a sheet length of up to 6.0 m and no more than 1.5 mm for a sheet length of more than 6.0 m.
4. 8 mm corrugated sheeting should not have sheet waviness in flat areas of more than 1.5 mm and 3.0 mm on the bends of the sheet edges.

Galvanized corrugated sheet C-8 is marked in accordance with the requirements of GOST 24045-94. Thus, the designation “profiled sheet S-8-1150-0.5” is deciphered as follows:

• C - wall;
• 8 — profile trapezoid height, mm;
• 1150 - useful (working) profile width;
• 0.5 - metal thickness original workpiece from rolled steel;

Application of C8 corrugated sheets

Profiled sheet C8 is not used in load-bearing structures, since the ability of a profiled sheet to withstand load depends on the height of the wave, and 8 mm is smallest value. Therefore, such corrugated sheeting is mainly used for the following tasks:

• finishing of building facades;
• production of sandwich panels;
• production of auxiliary buildings on sites by private developers: warehouse, barn, utility block, shower, toilet and others;
• construction of fences in areas where strong gusty winds are not typical.

To solve these problems, C8 profiled sheet with a polymer coating is especially relevant. It is aesthetically pleasing and has a longer service life than the galvanized version. Thus, polyester applied to C8 corrugated sheeting extends its service life from 10-15 years to 20-30, that is, approximately twice. If you use pural as a coating, then the service life of the profiled sheet can easily reach 50 years or more.

In addition to the increased service life, C8 corrugated sheeting with a polymer coating made of plastisol is resistant to mechanical damage, since the protective coating is applied in a layer of 200 microns. This profiled sheet is good for use in areas characterized by hail, frequent dust storms and other atmospheric phenomena that can damage the surface of the material.

Profiled sheet S-8 with a PVDF polymer coating is not so protected from mechanical damage, but it is chemically resistant to acids, alkalis and other active substances. Therefore, such corrugated sheeting is used in industrial regions, especially if production is chemical, near busy highways and on the banks of salty reservoirs.

In addition, S-8 polymer corrugated sheeting can be double-sided, so the fence will look equally good both outside and inside. In addition, double-sided coating extends service life.

Profiled sheeting S-8 - technical characteristics and dimensions

Profiled sheet C8, due to its low weight, is very convenient to install. For example, when building a fence from corrugated sheet C8-1150-0.6, the weight of one square meter fencing will be only 5.57 kg. The same applies to roofing, and the lower the weight of the roofing covering, the cheaper the rafter system.

The cutting dimensions of C8 corrugated sheets can be from 0.5 to 12.0 m, which makes it possible to reduce to a minimum the number of installation joints when using this material for roofing of residential buildings. How much corrugated sheet C8 weighs can be seen in the table below.

The working width of the C8 profiled sheet is determined as the difference between the full width and the amount of the installation longitudinal overlap with adjacent sheets.

When calculating the purchase volume of C8 corrugated sheets, the weight of the batch is determined as follows: the mass of C-8 corrugated sheets is multiplied by the length (area) of the sheet and by the total number of sheets.

The table below shows the data necessary to calculate the strength of structures made from C8 corrugated sheets.

C8 corrugated sheets - price, purchase, calculations

You can buy C-8 profiled sheets in any store of the construction hypermarket chain or directly from one of the many manufacturers by placing an order by phone or email.

Notes

1. The table shows the cost of profiled sheets made from rolled steel grade 01 in accordance with GOST R 52246-2004 (ON steel in accordance with GOST 14918-80).
2. For painted profiled sheet S-8, the price is indicated for a profile with a polymer coating made of polyester.
3. When calculating the costs of C8 corrugated sheeting, the price per sheet is determined by multiplying the price of one linear meter by the length of the corrugated sheet.

In the table below, the cost of C8 corrugated sheets is indicated based on average market prices. You can buy C8 corrugated sheeting by first checking its cost at the time of purchase from the seller or a regional representative of the corrugated sheeting manufacturer.

S-8 corrugated sheeting with a polymer coating is more expensive than galvanized sheeting, and the price can differ by 20% or 200% - it all depends on the type of polymer used. Thus, the most expensive pural costs 500-550 rubles per 1 m² with a metal profile thickness of 0.5 mm, which is more than twice the price of a simply galvanized version. On the other hand, the price for C8 corrugated sheeting with polyester coating is shown in the table, and the difference is only 30%.

When buying a C8 profiled sheet, the price of which is significantly lower than the market average, be sure to request a certificate in order to check the origin of the product using the batch number.

Sometimes corrugated sheeting manufacturers sell substandard products at reduced prices. Such material can be used for installing a fence on the internal boundaries of the site or building sheds and various outbuildings. However, do not purchase C8 polymer corrugated sheeting if its surface is damaged - in this case it will corrode very quickly and will not last very long.

By combining C8 corrugated sheets of various colors and shades, you will make the house attractive and elegant, and the fencing personal plot made from this material will be quite durable and reliable.

The Metallotorg company sells high-quality C8 corrugated sheets, manufactured in accordance with GOST, according to affordable prices. Delivery is carried out throughout Moscow and the region. Pickup from a warehouse in Moscow (convenient access roads near the Moscow Ring Road).

Descriptions of technical characteristics, drawings, price lists with the cost of profiled sheets can be found on our website. You can order C8 corrugated sheets either directly on the website by filling out a special form, or by calling the indicated telephone numbers. Profiled sheets are sold at retail and wholesale.

We guarantee you the quality and completeness of delivery, compliance with contractual terms and mutually beneficial terms of cooperation.

Price of products

Our company offers you to buy galvanized C8 corrugated sheets with a polymer or paint coating at the most favorable prices. When purchasing in bulk, a discount is provided, the size of which you can check with our managers.

Application of profiled sheet C8

The profiled sheet of marking “C8” is one of the best materials for the construction of fences and cladding of vertical surfaces (interpretation: the letter “C” in the marking indicates that the material is intended for the construction of partitions, fences and walls, the number “8” is the wave size in mm). It is light in weight, fairly stable geometry and high-quality protective coating against corrosion, ultraviolet radiation and other negative impact. It is easy to install, durable and economical. With low cost and excellent quality characteristics, C8 corrugated sheet has gained wide popularity in country and agricultural construction, finishing and facade works.

The height of the wave largely determines the properties of the sheet to withstand surface loads. Since the C8 profiled sheet has the smallest wave size, it cannot be used as load-bearing element designs.

The main areas of use of C8 corrugated sheets:

• facade finishing;
• erection of fences and other similar barriers;
• cladding of walls and partitions;
• installation of roofing in one-story buildings, provided that the roof has a large slope;
• construction of auxiliary and outbuildings (outbuildings, showers, toilets, sheds, etc.);
• installation of canopies, canopies;
• territory improvement work;
• production of sandwich panels.

Quality Standards

Galvanized corrugated sheet C8 is manufactured by the cold-rolling method in accordance with GOST 24045-94. Manufacturing material - thin sheet galvanized steel 0.5 - 0.7 mm.

Release forms:

• with zinc protective coating (according to GOST 14918), steel grades 01, 220-350 (cold rolled coil in accordance with GOST R 52246-2004);
• made of galvanized steel, type of coating - polymer (requirements are set out in GOST R 52146-2003);
• and made of galvanized steel, type of coating - paint and varnish (GOST for LKP 30246).

Quality requirements for the material:

• Minor abrasions and minor damage to the front side that do not affect the integrity of the protective layer;
• permissible deviations: 1 mm for profile height, 8 and 10 mm for sheet width and length;
• crescent shape of a sheet up to 6 m - no more than 1 mm per 1 meter of length, if the length of the sheet itself exceeds 6 meters - no more than 1.5 mm per 1 m.

In our company you can buy profiled wall sheet C8 with any coating. The quality of materials fully complies with established standards.

Technical properties of C8 corrugated sheets

Profiled sheet C8 is made with a corrugated surface. Corrugations (waves) have a trapezoidal shape. Wave height - 8 mm. At the base the width is 62.5 mm. The distance between adjacent waves is 52.5 mm. The sheet size varies in a wide range from 0.5 to 12 m. Working width is 1150 mm (defined as the difference between the sheet width and the longitudinal overlap during installation).

The weight of C8 corrugated sheeting is calculated per square and linear meter (in kg). It depends on the thickness of the steel sheet. Weight for some brands of corrugated sheets:

• S8-1150-0.4 - 4.45 kg per p/m, 3.87 kg per sq.m;
• S8-1150-0.5 - 5.42 kg per p/m, 4.72 kg per sq.m;
• S8-1150-0.6 - 6.41 kg per p/m, 5.57 kg per sq.m.

Sheets can be coated with a polymer or paint coating, which performs a dual function - protective and decorative. Available to buyers wide palette colors according to the RAL palette.

C8 corrugated sheeting has a low wave in the shape of a trapezoid - 8 mm, the width of the external shelf (B) is 62.5 mm, the internal one (A) is 52.5 mm, the installation width of the sheet is 1150 mm. The galvanized coating protects the structure of the steel, and the polymer coating determines the color and appearance during operation. The main demand is for steel thickness 0.33 / 0.40 mm.

Cost of corrugated sheeting grade C8-1200

Purchasing C8-1150 corrugated sheeting is a correct and balanced decision, since the price per sheet differs significantly from similar analogues, and the cost per square meter usable area is reduced due to the maximum sheet width (1200 mm) in the line of wall profile brands. Today it is the undisputed leader in the market of corrugated sheets for fences.

Current prices from 07/08/2019

Polymer coated
Steel thickness	Price per linear meter	Price per square meter
0.35 mm	248 rub.	206 rub.
0.40 mm	298 rub.	248 rub.
0.45 mm	328 rub.	273 rub.
0.50 mm	358 rub.	298 rub.

*Calculation example: For 20 meters of fence you need 18 sheets (installation width of the sheet - 1150 mm)

Application of corrugated sheet C8-1150

Galvanized corrugated sheet C8 with a polymer coating solves a wide range of problems, from light roofing to external reconstruction of buildings and installation wall structures. This brand is rightfully the most popular material among builders and professional fence installation teams.

Main Application:

• construction of fences (with one-sided and two-sided polymer coating)
• building façade cladding and installation internal partitions
• construction of temporary and permanent structures (cabins, shopping pavilions)
• production of panels with mineral wool filling

Where to buy C8-1150 grade corrugated sheeting from the manufacturer?

You can purchase galvanized and polymer-coated C8-1150 corrugated sheets from us, on terms that will be beneficial to you. Our company is a manufacturer; we offer for purchase not only standard colors, but also any others from the RAL catalogue. We produce only high-quality profiled sheets of grade C8-1150 from steel from proven metallurgical plants. We guarantee that our products meet all modern construction standards.

The right choice of manufacturer guarantees you high quality and the optimal price.

Photo materials on the topic of profiled sheet C8

Produced according to the standards for thin galvanized steel grade 01 according to GOST R 52246-2004; galvanized steel with polymer coating GOST R 52146-2003. the most popular and most suitable look profile for fence construction.

New SteelArt colors (steel art):

Available colors

Related products

Profile pipe

Fence plank

Caps for poles

Characteristics

The information provided is for reference only and is not a public offer.

Range profile sheets incredibly large, which allows consumers to make perfect choice. Most economical option is corrugated sheet C8. It is used to create sandwich panels, walls and fences. The low price of a material is not an indicator of poor quality. The profile sheet of this brand has many advantages that provide high demand. In our company you can buy C8 corrugated sheeting of any type, taking into account the purpose of the material.

Features of C8 corrugated sheeting and its application

Like all other types of profile sheets, C8 grade corrugated sheets are made from steel alloys. Therefore, its strength and durability indicators are quite high. However, the height of the corrugation is only 8 millimeters, which does not allow the sheets to withstand increased loads. The scope of application of this material is extensive.

It is widely used for:

• facade finishing,
• production of sandwich panels,
• creating fences,
• construction of economic structures near country houses and dachas.

In this case, it is necessary to take into account some restrictions associated with the features of this profiled sheet. For example, fences made of this material are installed only in places where structures do not have to withstand powerful gusts of wind.

In the production of C8 profile sheets, all types are used protective layers. You can buy galvanized material if aesthetics are not important. Low price C8 profiled sheet will allow you to create a structure without significant costs. The assortment also includes sheets with polymer coatings, making it possible to provide coatings with not only durability, but also attractiveness.

Purchasing C8 profiled sheets from our company

Purchase of any building materials for Moscow residents now it does not cause any difficulties. This product is widely available in specialized stores. However, our company presents professional sheets in the most complete range, which makes it possible to purchase materials for any purpose.

Our company managed to create ideal conditions for clients. To make buying building materials convenient and profitable, we:

• We offer a large assortment goods,
• We carry out orders in any volume,
• We will arrange delivery of the order,
• We use flexible system discounts

Our reasonable prices making these quality products accessible to everyone.

In this article we will look at the instructions for simple example reflection of production operations in 1C 8.3 “for dummies”, starting from the receipt of materials and ending with the release of finished products.

In our this step by step example We will be releasing products in 1C 8.3 - a chair.

Before we produce anything, we need to purchase materials (boards, nails and varnish). V 1C: Accounting this operation is reflected in the document “Receipts (acts, invoices)”. The type of operation in this case will be “Goods (invoice)”. Materials arrive on the tenth count.

We will not fill out this document in detail. If you have any difficulties, we recommend reading or watching the video:

Specification

You can go to the specifications of an item from its card in the directory (submenu “More”).

From the list form, you can create a new specification and specify an existing one as the main one.

Let's create a new specification and fill out its tabular part.

By default, the first specification created will automatically be set as the main one for this product. In our case, the production of one chair requires 1 board, 100 grams of nails and 800 milliliters of varnish.

Write-off of materials

Most often, materials in 1C 8.3 are written off for production either or:

• TN is usually used in cases where there is no connection to a specific finished product. For example, we write off Consumables, general business expenses, etc.
• The production report for a shift writes off materials for a specific product.

Request-invoice

This document is located in the “Production” section.

Fill in the organization and division in the header of the document. Next, add all write-off items and their quantities to the materials table.

The cost account will be entered automatically when posting the document. If you need to change it, for example, instead of the main production, specify general business expenses, set the flag in the item “Cost accounts on the “Materials” tab.” In the column of the table of materials that appears, make all the necessary changes.

In our example, we will write off only three own material. We will not use customer materials.

When posted, this invoice requirement will generate three movements along.

For a detailed article on this operation, read the article or watch the video using stationery as an example:

Release of finished products using the Shift Production Report

Now let's look at how to make a similar write-off, but with reference to a specific product. This is usually done using the “Shift Production Report” document. It is also located in the “Production” section.

In the header, select the organization, division and cost division. The default cost account is 01/20.

On the first “Products” tab, add a line and select our “Carved Chair”. Immediately after this, the main specification and accounting account will be automatically entered. If necessary, the values ​​in these columns can be changed.

We will not fill out anything on the services and return waste tab. Let's move on to filling out the materials.

On the last tab “Materials”, click on the “Fill” button and all data will appear here automatically from the specified specification. In our case, three materials were added: board, nails and varnish.

This document generated four entries: one for the production of “Carved Chair” products and three for the write-off of materials (boards, nails, varnish) into production.

Conclusion

If you compare the movements of the demand invoice and the production report for a shift, it is easy to see the difference between the purpose of these documents.

• The invoice requirement generates only transactions for writing off materials for production (Dt 20.01 – Kt 10.01).
• The production report for the shift makes absolutely identical write-off entries, but also releases finished products (Dt 43 - Kt 20.01).

In this regard, do not write off materials to production using an invoice requirement if you are already writing them off with a production report for the shift. Otherwise, this material will simply be written off twice.

The 20th account itself is closed at the end of the month with the corresponding regulatory operation to close the month.

We briefly reviewed the process of releasing finished products and accounting for production costs in 1C 8.3. Next, you can sell these inventory items to our customers using the document.