How to make a paper doll stand. Stand and not be afraid! MK Stand for dolls. How to make a stand for Monster High dolls from cardboard

Girls have always loved to play with dolls. And if earlier ordinary baby dolls were popular, then Barbie, now Monster High has become the ultimate dream of many little princesses. Girls collect entire collections, so the question often arises of how to make a stand for Monster High dolls so that they can be placed all on a shelf. In this form, they will not lose their appearance and will delight the owner even when she is not busy with them.

The Monster High collection will become wonderful decoration girl's room. And you can make it from various available materials. It can be wire, cardboard, plastic and much more. Let's look at some of them.

How to make a stand for Monster High dolls: master class

You probably have a few old jars in your pantry that grandmothers used to use to preserve vegetables. Such covers can become the basis for a stand.

1. We take a nylon cover and an unnecessary handle. We make a hole in the center of the lid, the width corresponding to the diameter of the handle. We insert it there. It's better to use an awl. And for a more reliable fixation, you can use silicone glue.
2. We take an ordinary plastic bottle and cut off a small piece of a convex shape at the bottom.
3. We light a regular candle and scorch the cut out piece on all sides to create a small structure in the form of a seat. This element will serve as a chair on which the doll will sit. The problem of how to make a stand for Monster High dolls is almost solved.
4. Using a glue gun, glue the structure to the handle. We take a beautiful woolen thread, fix it near the seat and wrap it tightly around the handle.
5. The lid can be decorated in different ways. You can knit a cover for it from the same yarn that was used to wrap the handle, you can decorate it with ribbons or cover it with colored cardboard or self-adhesive paper. The seat itself can be wrapped with tape so as not to damage the doll.

The stand can be used as a hanger for clothes or bags while playing.

How to make a stand for Monster High dolls from cardboard?

You can also make a good doll stand out of cardboard. minimum costs. Take corrugated cardboard or old box, cut out three circles with a diameter of about 10 centimeters. We glue them together using PVA. We glue circles of the same diameter from ordinary white cardboard on top and bottom.

We wait until the stand dries well. Then we take a wooden sushi stick, measure the place where the holder will be located, and lightly press with the sharp end of the stick. We take an awl and very carefully make a hole the diameter of the stick. We insert the stick inside. For better fixation, you can use super glue.

Decorating the stand

Cut from colored or corrugated paper a long strip, about a centimeter wide. We coat it with PVA glue and begin to carefully glue the stick in a spiral. From the same corrugated paper we make a square with a side of about 15 centimeters. Carefully place it on the stand, having previously smeared the bottom with PVA glue, piercing it with a stick so that the center of the stand coincides with the middle of the square.

Lightly coat the side and back parts of the stand with glue and bend the corrugated paper so as to hide all the cardboard joints and partially cover the bottom of the stand. We cut out another circle with the same diameter of about 10 centimeters from corrugated paper and glue it to the bottom of the product.

Now you know another way to make a stand for Monster High dolls from scrap materials. You can use wire to create a support for the doll.

Stand made of plaster and wire

Another very convenient, but more expensive option is to make a stand from plaster. Such products have more weight, are stable and neat. appearance. Let's take a closer look at how to make a stand for Monster High dolls from wire and plaster. You will need:

1. Dry gypsum powder.
2. Small diameter metal tube.
3. Copper wire for support.

First of all, make a stand for the doll out of wire. Use wire three times the length of the stand itself. Form it into a ring or handles for support and pass the end through metal pipe. Now you can start making the base.

To do this, take a pre-prepared mold. It can be round or square. According to the instructions, dilute the plaster and pour it into the mold. Then plunge into it bottom part racks. After complete hardening, the product can be removed from the mold, all irregularities can be smoothed out and covered with velvet.

Now you know how to make a stand for Monster High dolls with your own hands. Of course, for these cute monsters you can buy a variety of stands with special symbols in the store, but by showing your imagination, you can make even more interesting compositions by decorating them with flowers, ribbons, lace and other decorative elements.

Today, collecting dolls made by hand, to order, as well as those purchased from limited editions or simply popular ones has become widespread. Of course, no one wants to store such a collection in a desk drawer. Beauty should please the eye, be visible, and not gather dust on the mezzanine. Therefore, real collectors have a need to make a doll stand with their own hands. So that not only the collection surprises with its originality, but also the holder matches the favorite one hundred percent.

Possible materials

The doll stand must meet following requirements, regardless of the materials for its manufacture:

• stability so that it does not fall on its side from the weight of the doll;
• simplicity so as not to distract attention from the doll itself;
• accuracy;
• ease of use.

Possible materials for making stands:

• tree;
• wire;
• cardboard;
• newspaper tubes;
• gypsum;
• computer disk;
• seaming cap, etc.

Let's consider different ways creating stands using various materials as examples.

The most natural material

We will talk about making a wooden stand for dolls. The material is the most environmentally friendly, but also the most difficult for beginners, and even for masters without specific equipment. But in other way, wooden base You can always make it to order or buy ready-made. For example, you can use it as a stand wooden frame or a wooden hot stand.

If to make a wooden stand it is possible to make the base yourself, then for this you need to take a flat block suitable size and weight. If necessary, cut it out the desired shape base with a jigsaw. Thoroughly sand the workpiece on all sides.

Stepping back a little, drill a hole from the edge or in the center for wooden stand. The location for the hole and its size depend on how the doll will be attached to this stand and how thick the stand is. If desired, paint the workpiece with paint or burn a pattern with a soldering iron. Then open with varnish.

Master class on making a wooden stand for a Tilda doll.

Necessary tools in the photo:

Materials:

• Chinese stick;
• finished wooden stand;
• wire;
• silk thread;
• knitwear or fleece;
• PVA glue;
• acrylic paint.

Drill a hole in the center of the workpiece, suitable in thickness Chinese stick so that it sticks well to the base.

Drill holes in the stick (not all the way through) from opposite sides at distances of 0.5 cm and 1 cm below the edge.

Make a wire blank, as in the photo:

Insert one end of the wire into one hole, and the other from the opposite side into the other. Tighten the joint with silk thread.

Straighten the wire saddle and try it on the doll.

Cut a piece from the fabric that fits the size of the wire saddle:

Sew the part directly onto the structure.

If desired, decorate, open with varnish.

Paper coasters

This type of coaster is made from cardboard (2 mm thick) or newspaper tubes. Let's look at how to make a base from these materials.

For a cardboard stand you will need:

• cardboard;
• office paper or napkin;
• PVA glue;
• glue Moment;
• sandpaper;
• acrylic paints;
• acrylic lacquer.

Depending on the desired thickness and size of the stand, cut 6-10 pieces of cardboard. Cut out identical circles from the pieces.

Glue the circles together with Moment glue and place under a press for an hour. Use sandpaper to smooth out any uneven areas on the sides.

Cover the workpiece with crumpled office paper and dry it in the oven. If desired, paint and varnish. Make a hole for the holder.

Base made of newspaper tubes. Prepare newspaper tubes. To do this, cut a newspaper page into 4 strips. Start winding the newspaper strip onto the knitting needle from the corner. If the knitting needle is covered with newspaper, move it aside and continue winding. When the newspaper runs out, glue the tip with PVA glue.

Take the first tube and wind it onto future stand. When the first stick is finished, the stand can be removed. Wind up enough tubes so that the diameter of the base is sufficient for a stable stand.

Make several such disks, but each one is slightly smaller than the previous one.

Assemble the stand onto the stand. For this, everyone new disk stick well to the previous one.

Decorate the resulting pyramid as desired.

Construction material

In this master class we will look at how to make a stand for a doll from plaster. The main materials are plaster, thick wire, metal tube.

Take a wire 3 times longer than the height of the stand. Fold it in half, form a ring for the stand, and then a holder according to the size of the doll. Pass the ends of the wire through a metal tube.

To make the base, choose any unnecessary plastic mold. Dilute the gypsum in the required proportion (indicated on the package) and pour it into the mold. Insert the stand, leave to dry at room temperature. After a few hours, remove from the mold, but leave to dry for a while. The glue does not stick to wet plaster, and the base can easily be damaged.

Decorate as you wish. You can paint it with paints, cover it with fabric or corrugated paper.

Such holders are often used for Barbie and Monster High dolls.

Disc stand - master class on video:

Video on the topic of the article

A few more video ideas:

Hello, dear friends!

I searched the Internet for articles and videos about how to easily make a stand for Barbie-type dolls, tried to do it as they advised - from plastic bottles and jar lids.
All this does not look very aesthetically pleasing in practice.
They also suggested using alabaster - I didn’t bother. No time.

I liked the idea of ​​​​making a stand with a base made of corrugated cardboard, one hashi and wire.

But, during the making of the stand, other ideas came to mind.
And it turned out that everything is very simple and beautiful!

We need:
- corrugated cardboard;
- glue;
- Khasi (do not share!);
- a round thing that you can circle so as not to have to worry about using a compass (I took part of a stand from a doll);
- a plastic ring for curtains in the bathroom (can be replaced with wire);
And
- a ruler, for those who find it difficult to measure by eye;
- for decoration - this is everyone’s fantasy, but the easiest way is colored cardboard.

1. The preparation of the stand is done in an elementary way.
In my case, we trace a round stand on cardboard (I made 3 circles, more is possible), cut it out, and glue it together.

2. We immediately decorate - this is at your discretion: I used colored cardboard to decorate one stand (this is a very simple option); for the other - self-adhesive film (this is a very durable option).

We also trace our circle on colored cardboard and cut it out.

3. Glue this circle of colored cardboard on top of a stack of corrugated cardboard.

4. We measure out the space for our support for the stand. Using a ruler, measure the middle, step back 1/4 from the edge, take the hashi and press it onto the cardboard from above.
A mark remains and along the middle of this mark we make a slit with a knife.

4. Insert the Khasi into the slot from below until it stops.

5. We put the ring on the doll’s waist.

6. Then we put the ring with the doll on the hasi.

The doll stands steadily. The main thing is not to widen the slot for Khasi. But if you constantly take it, the khasi slot may become loose.

Therefore, it holds more tightly if the top, bottom of the stand and the hashi itself are covered with self-adhesive film (insert the hashi and then glue the bottom).

And the very place where the hashi is inserted into the stand is also sealed with film around it (I mean on the top of the stand).

Also, for beauty, we will paste around the side of the stand.

I took the film under the tree. I really liked the result! You can also take a marbled film, etc. or even decorate with stickers.

The master class is dedicated to those who make dolls. The stand is an irreplaceable thing. If you are making dolls for yourself and your family, it will allow you to neatly organize the space where the dolls are placed. If you are selling your dolls, then it is simply impossible to do without a stand (if the doll does not stand on its own)! Often stands are made of wood, but not everyone has this option. We will look at the easiest way.

Materials and tools:
- cardboard;
- paper;
- scissors;
- glue stick;
- wire;
- pencil;
- brush;
- acrylic black paint.

Step 1. Cut out 11 circles of the required diameter from cardboard. The number of circles depends on the height of the stand and the thickness of the cardboard. I used chocolate and cookie boxes.

Step 2. We put two circles aside, the rest (in our case nine) are glued together.

Step 3. Now that the glue has dried, we make a small hole where the holder itself will be inserted.

Step 4. We make a holder from wire. Everything is individual here! If the doll is small, like mine, a single thickness of wire is enough. If the doll is large, the wire can be twisted into several folds or a braid made of wire (it is elastic enough for this). So, measuring the width of the doll’s waist, we bend the “legs” of the holder. Then we measure the desired height.

Step 5. Cut off the excess wire, but leave an extra few centimeters on the holder. Now we insert the end of the wire into the hole in the stand and bend these few extra centimeters on the back side. We seal, thereby securing the holder, with one of the two remaining circles.

Step 6. Take our sheet of paper and crumple it as intensely as possible.

Step 7. Cover the stand with crumpled paper.

Step 8. On the back side of the stand, trim off the excess paper and glue the edges.

Step 9. The high point of our last lap has arrived! It should be a few millimeters smaller in diameter than the others. Glue it to the bottom of the stand.

Nowadays, dolls have become extremely popular not only among children, but also among most adults who prefer to collect them. Some series of dolls (for example, Monster High) are sold with ready-made plastic stands, which are decorated with individual attributes for each doll. But it’s not cheap, and it’s much more interesting to do such a thing yourself. Therefore, in our article we will talk about how to make a stand for a doll from a wide variety of materials with your own hands.

You can make a stand from almost any material that you have at hand. This could be plaster, paper, old discs, seaming caps and much more. There are countless options for creating a doll pedestal. But today we will tell you how to make beautiful and practical stands for dolls of the most popular series.

How to make an original doll stand with your own hands

And first, we will show a master class on making a wooden stand for tall, rare or porcelain dolls. Wooden stand, of course, is more durable and practical. Compared to paper or even plaster. To make such a stand we will need:

• pine board;
• silver aluminum tube;
• glue (epoxy resin);
• masking tape;
• galvanized wire with a diameter of 3 mm;
• drill and drill bit No. 10;
• jigsaw for wood;
• heat shrink tube with a diameter of 7 mm;
• wood stain.

So, using a plate or any other rounded material, we outline on the board the dimensions of the base of the future stand. Using a jigsaw, we cut out a circle along the already marked line, and mark a place for the tube on it.

We sand the circle using sandpaper and drill a hole in the intended place. To prevent epoxy resin from getting onto the surface of our base, it is necessary to seal the hole on both sides with tape. Next, with front side blank, make a hole in the tape using an aluminum tube. Knead epoxy resin according to the instructions.

Lubricate the end of the aluminum tube with resin, insert it into the hole made and let it harden. After this, remove the tape from both sides of the base. Now let's treat our base with stain. In order not to stain the aluminum tube, we wrap its bottom with tape. We undermine the workpiece with decorative impregnation and wait for it to dry completely.

We sand the circle with fine sandpaper and cover it with stain again. Dry and remove the tape from the aluminum tube. After this, you need to put the doll on the stand, measure and mark the extra piece of tube with a pencil, and then saw it off.

Now you need to bend the wire into a convenient supporting structure and put it on its edges heat shrink tube. Next, by heating it over a flame gas stove, you need to achieve uniform shrinkage over the entire surface.

The ends that are soldered to the tube wire can be clamped with pliers. Using scissors, we cut off all excess plastic at the ends of the wire and sand it with fine sandpaper to give it smooth surface our product.

Well, the stand is ready, all that remains is to test it in practice.

Another very common series of dolls is Barbie, which can be found in almost every home where there are girls of different age categories. Creating a stand for such a doll will not be difficult.

To do this you need:

• two caps from plastic bottles;
• old disk;
• aluminum tube;
• Super glue;
• a small piece of tin from an old coffee can.

In one of the lids, remove the bottom and a small piece of the side wall.

Now you need to line a rectangular piece of tin. And bend along the marked lines into three folds.

Then you need to grab the workpiece from the lid with this piece, as shown in the photo.

We insert the free ends of the tin piece into the aluminum tube. We drill a hole in the second cover and insert the second end of the tube there.

We glue the lid to the disk and decorate it with any material and accessories. The stand for the Barbie doll is ready!

Our next master class will be making homemade stands for Tilda dolls, which are increasingly appearing in the homes of many doll makers.

For this we need:

• A4 paper (14 pieces);
• copper wire that can be bent;
• PVA glue;
• brushes;
• threads; acrylic paints;
• acrylic lacquer;
• ruler with pencil;
• thermal gun.

Divide a sheet of paper lengthwise into 4 equal parts and cut. This is what we do with all the sheets. Now you need to divide each strip lengthwise into three more parts and bend along the intended lines.

We make a loop from the wire. The longer it is, the more convenient it is to wind strips of paper onto it. Longer, we take a folded paper strip, coat it with glue and before it has time to dry, we wind it onto our loop.

We glue the strips one by one, because this way they dry much faster. Each subsequent strip must be glued end-to-end with the previous strip, and so on, until the required volume is reached.

To ensure the strength of the base, it must be coated on all sides with some and allowed to dry.

Now we will make a holder. To do this, we bend the reins so that we get a supporting structure.

To make the holder look nice, you can wrap it with threads or paint it to your liking.

Using a heat gun, we attach the holder to a ready-made base, the top of which is coated with gold. acrylic paint. Everything is ready, you can place the doll.