Ceramic tiles Braas (Braas). Ceramic tiles Braas Ceramic roof tiles Braas

CPU tiles, manufactured using existing technology, were first made in 1919 in the UK by Redland (currently part of the BRAAS MONIER Building group, which also includes BRAAS-DSK1 Russia). Redland provides a 100-year guarantee on its shingles. Guarantee period expires only in 2019, while it has lain on roofs for 96 years. The climate of Great Britain is less severe than Russia, but more humid - an island state, you understand, and deep temperature transitions through “zero” also occur there. But, even under these conditions, I repeat, our British colleagues have a 100-year guarantee. I think this speaks to good performance such roofing material, like cement-sand tiles.
In Germany, a similar plant was launched in 1954; our German colleagues provide a 30-year guarantee on CPU tiles. But in Germany, it certainly didn’t lie on the roofs for 100 years. In Russia, our plant started up in 1996, and our roof tiles lasted only 18 years. This period is too short for final statistics.
But, if we talk about technical and operational characteristics, it is important to note that in fact it does not matter in what climate the tiles are used, what is important is the transition of temperature through the zero mark, and not just a transition, but, as mentioned above, a deep transition , i.e. downgrading to “good” minuses. So, we test our CPU tiles for these transitions at intervals of 3 years (the test is carried out by VNIISTROM), and these tests show that our tiles can withstand 1000 such transitions. I would like to note that in Russia only we (the BRAAS-DSK1 company) conduct such tests.
Long-term observations of our Western colleagues on the changes occurring with central tiles during their use on the roof show that erosion (thinning) of tiles occurs at a rate of 1 mm every 40 years. The tiles are suitable for use under these conditions as long as they can withstand the roofer’s weight of 100 kg, and the tiles will withstand this weight even if they are thinned to 6 mm. If the initial strength of the tile is 200 kg per 12 mm of tile thickness, then through simple mathematical calculations it turns out that wear of 6 mm will be achieved in 240 years (6mm x 40 years). Thus, the calculated service life of the tiles greatly exceeds the 100 years we stated.
As for ceramic tiles, the formation Russian market happened only 10-12 years ago, and it’s too early to talk about the experience of using these tiles in our climate. We rely only on the experience of our colleagues from other countries. The warranty on German ceramic tiles BRAAS is 30 years. Other manufacturers give up to 50 years. The experience of using tiles in other countries suggests that they can be used in different climates.

From parameters roofing many depend performance characteristics private house. First of all, the task of the coating is to resist precipitation. In addition, do not forget about such properties as sound insulation and thermal insulation. Do you want to achieve the optimal combination of all these properties? Then pay attention to the fact that the price of Braas ceramic tiles best meets consumer requirements. Just imagine that the manufacturer declares the possibility of use at a temperature of -60°C. It is not for nothing that large quantities of such goods are purchased from Scandinavia. As for fire resistance, it is also capable of impressing the most demanding consumer; the products can withstand heat up to + 190°C.

Production of ceramic tiles Braas

In any country in the world you can buy Braas ceramic tiles, because a powerful branch dealer network has been created to sell them. The amazing low cost of sheets is due to successful technological solutions that allow the use of inexpensive raw materials. Let us note that the “output” is a product of decent quality, capable of competing with more elite samples. By the way, the affordable price for Braas ceramic tiles is the result of successful logistics, because production sites have been established in the Russian Federation trademark. It is quite natural that domestic products are sold on more attractive terms.

Potential buyers should be warned that care must be taken to create a powerful rafter system, capable of supporting massive sheets. As for the permissible laying angles, they can range from 20-60 degrees. Practical experience proves that it is possible to use the material at smaller angles of inclination, up to 16 degrees. But we need to take care to create better, reliable waterproofing. So, let's proceed to a more specific listing of the benefits of coverage:

• during operation, substances harmful to human health are not released - the material is made from completely pure raw materials;
• pay attention to the attractive, harmonious appearance, sheets of many shades are available to order, ideally matching wood, brick, and various architectural styles;
• you will not have to invest significant additional funds in providing thermal insulation;
• Having decided to buy Braas ceramic tiles, you can be completely confident that the appearance of the mansion will be preserved for decades - the samples adequately resist ultraviolet radiation;
• if any element is damaged as a result of careless handling, it is easy to replace it without involving a specialized specialist for this purpose;
• The service life, reaching half a century, is of particular importance.

Favorable price for Braas ceramic tiles

For the sake of objectivity, we need to talk about the difficulties that consumers expect when working with such samples. Affordable price on ceramic tiles Braas comes with several disadvantages. However, they cannot be classified as critical. Be prepared to handle with extreme care during transport and installation - the material is very fragile. The owner of the cottage will have to take care of creating good ventilation of the roof structure. To summarize, we can say that the advantages significantly outweigh the minor negative aspects that have to be encountered during the unloading and installation process. To avoid any annoying misunderstandings, avoid haste, then each copy of the consignment will remain safe and sound.

Ceramic tiles Braas is produced by the world leader building materials for roofs pitched type– Braas Monier Building Group. It has a representative office in 4 dozen countries. Natural Braas tiles are produced at 99 production sites. These figures speak for themselves, since the materials are not produced for long-term storage.

Sales volumes worldwide amount to approximately 1.5 million euros annually.

Features of the production of Braas ceramic tiles

• Scrupulous selection and quality control of raw materials for the production of Braas ceramic tiles and other roofing materials.
• The pigment is added to the resulting dense mixture, so that the materials do not fade throughout use.
• Rolling tiles involves maximum compaction.

• To form an optimal bond between the dye and the material, the tiles are painted raw.
• Drying is carried out in special chambers at hard temperature conditions which provides the required strength.

• For a smooth, impressive and durable surface natural tiles Braas is undergoing final painting.

Assortment of natural Braas tiles

Braas roofing is usually classified according to its profile:

Ruby

This profile is characterized by a groove lock, which gives the roof excellent waterproofing parameters. This type Designed for roofs with a small slope. Color palette profile "Ruby" - as wide as possible.

Agate

This profile allows you to install high-pitched roofs. It is characterized by a distinct wave expression. Color solutions- few in number and represented in the most current shades.

Pomegranate

This profile has a traditional shape and is equipped with a groove lock. Optimal angle for the use of “Grenade” - 30 degrees. A unit of material has big sizes, which facilitates the installation of Braas tiles.

Emerald

These tiles have a diamond shape, and the Braas roof from them is characterized by the original scaly appearance. Groove locks provide excellent waterproofing. The model is relevant for roofs with complex geometry.

Sapphire

This is a traditional roofing material for Mediterranean houses and also for northern Germany. The optimal tilt angle is a little more than 20 degrees.

Opal

Otherwise, this model is called a “beaver tail”. It is relevant for complex roofs architectural form. Allows you to use two types of installation: standard and double. Produced in a wide color palette.

Topaz

Traditional forms allow the model to be used in restoration work. She shapes optimal waterproofing for roofs with slopes of 28 degrees.

Tourmaline

If you want your home to have the visual appearance of a slate roof, buy tiles Braas models"Tourmaline". This type of roofing has additional benefits. Since the resulting roof is flat and smooth, it is always clean and well maintained. The model is relevant for buildings in the high-tech style.

Galeand

This model is characterized by a curved profile in Mediterranean style. This texture creates a pleasant and soft exterior of the building. This model– matte and has few color options.

Sirius

The model has a traditional appearance and a groove lock. The price of Braas “Sirius” tiles is as affordable as possible in comparison with other profiles, since it is light in weight and produced using simplified technology. The dimensions of the material units are large, which makes installation easier and faster.

Advantages and disadvantages of Braas ceramic tiles

The advantages of this material include:

• Stylish and incredibly aesthetic appearance.
• High heat and sound insulation.
• Excellent level of fire safety.
• The price of Braas ceramic tiles is in a wide range: from 1800 rubles per square meter up to 6 thousand rubles per square meter. This way, every buyer can find material that is adequate to the allocated budget.
• Resistance to any environmental influences.
• Incredible durability - at least 100 years.
• Thoughtful equipment additional elements allows you to create the most beautiful and functional roof.

Since Braas roofing material is an improved analogue of traditional tiles, we can say that the shortcomings have not been identified for several hundred years.

Cost of Braas tiles

Stages of arranging a roof with Braas tiles:

• Installation roof railings and installation of scaffolding.
• Measuring work.
• Alignment

Inexpensive, high-quality tiles with a classic wave-shaped profile.

Ceramic tiles are rightfully considered the best option roofing covering. General principles its manufacture has been preserved for centuries. However, the production process does not stand still. Every year the performance characteristics of tiles improve. IN Lately it is very popular in our country.

The Stroymet company offers you big choice ceramic tiles from the Russian division of Braas DSK-1, manufactured using innovative technology, as well as products from foreign representative offices of BRAAS. Most models of ceramic tiles of this brand are named after precious and semi-precious stones. And this cannot be called an accident. After all, many stones are truly considered real masterpieces, just like Braas products. Ceramic tile roofing is not afraid of high and low temperatures, fire, precipitation and exposure sun rays. This makes it reliable and durable. You can get detailed advice from Stroymet specialists (by phone or e-mail) for all types of products, as well as place an order and buy Braas tiles.

On our website you can choose a builder to install cement-sand tiles.

We check the builders that you find on our website when they are posted on the site and at least once a year. Periodic testing is carried out on real objects. If we identify poor-quality work, we seek to correct the shortcomings. When serious mistakes we remove the builder from the site. We offer two ways to find a builder:

Choose a builder yourself from the list, which is available at the link. The number of builders is determined by you.
Send an application to all builders in the selected specialization. No more than three builders will contact you within 24 hours. A specially designated UNIKMA employee monitors all applications and will help if difficulties arise.

Our builder selection service has been operating for over 10 years. All this time, our goal has been and remains the desire to help our customers buy good material and properly installed on your home.

Since 2018, we are ready to offer you our new service - turnkey roofing according to UNIKMA standards. Now roof construction will be much easier for you. We have made a big step forward in standardizing construction technology pitched roofs from metal tiles, flexible tiles, ceramic and cement-sand tiles, as well as roof insulation. We have certified foremen from among the builders on our website and can recommend them as builders who can build according to the agreed specifications and according to our Standards. To make it easier and more convenient for you, we assign a special manager for you who will help with choosing a builder, measuring, calculating and organizing control over the construction of your roof.
If you are interested, request a call back from our specialist.

Still have questions? Contact anyone in a convenient way, and we will help you find a builder.

In order to quickly and conveniently receive your order, we suggest you use the UNIKMA delivery service!

We have our own fleet of vehicles, and this allows us to ensure delivery of materials within the agreed time frame. And if all our cars are already rushing to customers, then our partners will definitely come to the rescue, and you will receive your order on time!

With us, you don’t have to worry about your materials - drivers are responsible for the order from the moment it is loaded into the car until it is delivered at the site.

You can also pay for your order on the spot if the payment amount is less than 100 thousand rubles.

From us you can get a calculation of roofing materials and components for your roof. We carry out calculations of roofs of varying degrees of complexity according to what you have: a house project, a roof plan or a drawing with dimensions.
It is important to understand that in any case the most correct calculation The builder who will install your roof can do it for you. If you don’t have a builder, we will do the calculations ourselves.

Attention! Our specialists cannot know what installation technology your builder will use. Therefore, the calculation result must be checked by your builder before ordering materials and components.
To order a calculation, send us a roof plan by email.