Unusual crafts made from tires. Crafts from tires: flower beds, flower beds, figures, garden furniture. Do-it-yourself swan for a garden for a flower bed: master class

In our article we will talk about DIY garden tire crafts. In the photo in the first part of the article - useful crafts that will make life is more convenient any summer resident. In the second part we have collected for you the most bright decorative crafts made from tires- flowerpots, swans, hanging pots for hanging flowers and master classes on their production.

Part I. Useful DIY crafts from tires

Non-slip tracks

Number one in our hit parade is tire tracks. First of all, you no longer have to deal with grass growing on your walkways. Secondly, Reliable protectors will prevent you from slipping. Thirdly, with such paths you will not bring dirt into the house.

Tire tracks are durable, and they are not difficult to make: cut off the treads and use nails (or better yet, self-tapping screws) to attach them to several cross sticks.

Reliable steps

Anyone who has ever fallen from a ladder will appreciate the reliability of the coating on these steps.

Textured border

Tires most often have quite beautiful drawing. It can be used to decorate the lower part of a small utility room. At the same time, you will protect the walls from inevitable dust and dirt.

Before making such a craft from tires It is important to make sure that the length of the protectors with the same pattern is enough to decorate the entire room.

Cheap tire seat

Who would have thought, but tires are convenient to use as garden “ottomans” - however, they are quite hard. These DIY tire crafts are easy to make, the only drawback is that they are quite heavy and not very convenient to drag.

Convenient bike parking

Do you have a family of avid cyclists? Make a bike rack out of tires for the whole family. And most importantly, when a new cyclist arrives, it will be very easy to expand.

Part II. DIY decorative crafts from tires

Ground flowerpots

A “daisy” is cut out from the top of the tire, then the tire is turned inside out. It remains to paint it, and the flower container will be ready. If the tire is not removed from the base, you can make a flowerpot with a leg.

The most time-consuming operation is the eversion of the tire. There is a little trick: when you turn the tire about halfway out, press on it to make an oval - then the work will become easier.

Combine several tires, experiment with the shape of the petals and coloring, and your crafts - flowerpots made from tires - will be unlike others.

Tire swans

Swans are a classic craft made from tires. The technology is about the same. The photo shows instructions for this DIY garden tire craft.

1. Draw a cutting diagram on the tire.

2. Cut the tire according to the pattern (first the head, then the tail and feathers).

3. Turn the tire out.

4. Make a beak and paint it red.

5. Place the 2 halves of the head together, insert the beak between them, and fasten them with self-tapping screws.

6. Raise your head and press it down a little. Secure the resulting fold with self-tapping screws.

7. Color the swan and decorate the eyes to cover the screws.

Tire cutting options may vary slightly. Choose the one you like best.

Exotic birds made from tires

It's always nice to make something beautiful and useful out of a junk item. A clear example of such creativity is beautiful flower beds from tires. They are not difficult to build, but their benefits are enormous. But the imagination of dacha masters is not limited to this. From old wheels, which often just lie on the road and pollute the environment, they make street furniture, sculptures for the garden, and even rebuild small children's towns.

Such a simple and unsightly material at first glance, like old car tires, in fact, seems to be specially created so that every summer resident can feel like a real artist and decorate his plot with real designer flower beds and original author’s sculptures. Without exaggeration, you can cut anything out of tires. Such crafts are on par with those made from plastic bottles all year round will delight the eyes of the owners and guests of the dacha, and most importantly, will not require special financial investments.

It’s also nice that the benefit of the idea of ​​​​making crafts with your own hands from tires is double: on the one hand, we recycle a wheel that polluted the environment, and on the other, we get an original one. garden decoration or a flower bed.

Crafts made from used rubber tires amaze with their variety and the richness of the imagination of their authors. Here are the most common ones:

A small flower bed. The easiest way to make flower beds from tires is to leave the tire as is, just decorate it brightly and fill it with soil. Nothing complicated. Even a weak woman or child can cope with this, and such a flower garden will look wonderful.

Flower beds made from old tires in the form of various objects. Make them more difficult. The tire is cut into two unequal parts and the larger one is turned inside out. It is worth noting that the edges of tires can be made various shapes, it's all just a matter of imagination and sleight of hand. Using this technique, flower beds are made in the form of a mug, flower, or vase. A huge rubber cup made from tires looks very funny. And some craftsmen thus build an entire tea set on their site.

Flower beds and sculptures in the form of animals and fairy-tale heroes. A funny frog made of tires, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it’s easier to list what they don’t do from this available material. The only condition- think through the composition from the very beginning, so that there are no unpleasant surprises later.

Multi-tiered flower beds made from several tires. The simplest one to make is a three-tier one, but the number of parts can be greater. Several tires of the same or different sizes are placed on top of each other or in a checkerboard pattern. A tire well looks impressive, stylized to look like a real one and equipped with all its inherent attributes: a chain, a shaft with a visor, a bucket. This flower bed can also be used as a vertical bed for growing berries and vegetables.

A strawberry bed made from tires will take up minimal space and give a rich harvest. It is also perfect for growing seedlings, herbs, and peppers. From such a flower bed you can make a fence for a raspberry or currant bush, or make several of them and use them to delimit the garden into cultural zones. It is also worth mentioning that a well made from tires is often made not only decorative, but is used to disguise a drainage pit or septic tank.

Experienced craftsmen and craftswomen know many secrets that help them create garden sculptures and flower beds made from tires with your own hands. They understand better than anyone how to make unique and inimitable handicrafts from old, useless trash. Here are just a few of these secrets:

• Imported tires are best suited for the job, as the rubber on them is softer and easy to cut. But in their absence, domestic products will do. In principle, they are quite easy to process and allow you to give crafts from them different shapes.
• Tires intended for use on winter roads are more pliable, easier to cut and easier to process than those used in summer.
• The longer the tire has been used and the more it is worn, the thinner, softer it is and the easier it will be to work with: cutting and turning.
• Before you start creating a craft, the material needs to be prepared: thoroughly cleaned of dirt, and degreased before painting.
• For cutting car tires use sharp knife, with a thin spine. You can check how well it is sharpened by running the blade along a notebook sheet, holding it suspended. If the knife does not cut or tears the paper, it is not sharp enough.
• Cutting a car tire for garden crafts It’s more convenient if you periodically lubricate the knife with machine oil. This will make it easier to fit into the rubber. Used oil will also work.
• When you need to cut out some shaped elements, markings are applied to the tire. It will help you achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, in as a last resort, marker.
• The durability of the craft depends on what paint you use to paint the rubber. Suitable for old wheel tires: car paints, as well as any paints for street work.
• Before painting the tire, it is recommended to prime its surface. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
• Paints in aerosol cans speed up the painting process to 20-30 minutes, and the painted layer itself is made more uniform.
• Decorative finishing can be made from scrap materials. For example, cover the surface with pebbles, bottle shards, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed made of tires not only from the outside, but also from the inside. This way they will look more aesthetically pleasing, and the black rubber will not be visible from the inside.

Of course, every master has his own secrets, and it is impossible to list them all. And when you take up this fascinating business - tire sculpture, you will certainly have them too.

Several master classes on making crafts from old tires

As mentioned above, crafts made from tires are varied. Their appearance and purpose are limited only by the imagination of the master. We invite you to familiarize yourself with the basic models. After reading them, you will learn how to make a flower bed from tires with your own hands and you will be able to create original, unique and useful garden accessories yourself.

A simple flower bed in the shape of a flower

A small flower bed made like a daisy from one tire is the simplest basic model. You can make several such flower beds, arrange them sparingly and decorate the approach to the house. Sometimes they are placed on asphalt or tiled areas.

We will need:

1. One old tire.
2. Sharp knife.
3. Marker or chalk.

Mark the cut location with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that could damage the knife. Usually they are inserted into tires for trucks.

We cut the tire along the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Leading the knife along the thickening, cut out a circle from the back of the tire.

Then, along the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (end of the tread).

After that, the tire must be turned out. The flowerbed is ready. All that remains is to paint it, giving it a more attractive look, fill it with soil and plant plants.

For greater clarity, watch the following video:

Garden flowerpot from an old wheel

You can make a beautiful garden vase from an old wheel in a short time.
Such flowerpots look better in pairs in front of the house, on opposite sides of the door or porch. Let's look at a step-by-step master class on how to make them.

We will need:

1. Tire with disk.
2. Sharp knife.
3. Chalk or marker.

Using chalk or a marker, mark a zigzag line along the entire frontal circumference of the tire, along which we will begin cutting. Thanks to her, the flowerpot will look like large flower with many petals.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in machine oil (used oil will also work).

After the wheel is cut, we check whether there are any uncut sections left and proceed to turning it out. It is better to do this together with an assistant, slowly, in parts.

After we managed to turn out the tire for the future flower bed, it turned out that there was a tube in the wheel. It needs to be cut out and thrown away.

The flowerpot is ready. Its bowl was made from the main part of the wheel. There is no need to remove the disk from the tire. It serves as a raised platform and stand for the vase, and the remains of the tire at its base provide additional support.

All we have to do is clean, degrease and decide how to beautifully paint our new garden vase. When you pour the earth into the bowl, do not forget to put a gasket on its bottom so that the earth does not spill out and make several holes in it to drain the water.

Video instructions for making a flowerpot:

Swan from an old tire

The most popular garden sculptures made from tires are swans. They are usually placed near an artificial pond, which gives the area a stunning look. You can plant grass in the bird itself, then it will seem that it is peeking out from behind the vegetation. Detailed information will help you make it step-by-step instruction with photo.

We will need:

1. Sharp knife.
2. Electric drill for making holes for entering the rubber of the knife.
3. Sander or file.
4. Jigsaw.
5. Chalk or marker (marker is better).
6. Wire 5-6 mm in diameter (hard, to shape the neck of a "swan").
7. Plastic clamps (for shaping the head).
8. Roulette.
9. Gloves.

According to the diagram, we mark the contours of the future swan on the surface of the tire using the following video, in which the author uses dimensions in inches, calling them inch in the international measurement system. Inch (1 inch) = 2.54 cm.

How beautiful and neat our sculpture will turn out depends on the accuracy of the markings.

Let's start cutting. At the initial section, we drill 3-4 holes at a distance of 3-5 cm with a drill and cut the tire between them with a knife. We insert a jigsaw into the resulting cut and begin to cut out the swan.

After all the contours are cut out, we turn the tire out. We try to do this carefully, since careless movements in the thinnest places can tear it.

To make the bird’s figure look more neat, we smooth all the cuts along the contour with a sander.

To shape the neck of a swan, we insert a wire into it. To do this, drill holes in the center of the neck and to the end of the body every 20 cm. We impose the wire and fix it in the holes with soft staples.

Forming the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps we give the swan’s head the shape.

Our tire swan is ready. It remains to paint it and make a stand.

The swan can be dyed White color or do not paint at all, leaving black. We make the beak red. Swans look very nice in a pair: black and white.

Without a stand, soft rubber swans will not stand. You can simply take any tire and paint it, for example, blue. Thus, it will symbolize the pond. Or you can take the time to make it curly.

We make the figured stand in the same way. We mark the outline on the tire along which we will cut, cut the tire along it, turn it inside out and paint it.

Using a similar technique, you can make any shapes from tires: animals, birds, fairy-tale creatures.

But, if you don’t want to bother with complex markings and cutting, you can do it simpler. For example, assemble a cute frog from whole tires.

Making a frog from tires is very simple. The body and head are assembled from one or several larger tires, eyes are assembled from small wheels, for example from a baby stroller, and paws are assembled from rubber scraps.

Flowerbed chamomile

It’s hard to come up with a decoration that’s easier to make than this flowerbed. Despite the fact that it requires several car tires, it can be assembled in literally 15-20 minutes, it looks nice, neat and will never be out of place.

We will need:

1. Three old tires of the same size.
2. A sharp knife or grinder.

We cut all the tires in half, having previously marked the cut locations. Before cutting, find out if there are metal cords in the rubber. A knife won’t take them, so use a grinder.

To give the future flower bed an aesthetic appearance, you can paint the tires. It is better to do this in advance, immediately after cutting.

From 5 halves we form a fence in the shape of a flower and cover it with earth.

Video about the process of creating a daisy flower bed:

[Ratings: 19 Average rating: 3.6]

For modern applied art, a variety of available materials are used; you can even make crafts from old car tires for the garden and dacha. How? We will talk about this in the article.

It turns out that by showing your creativity, you can create masterpiece works of art for the garden from ordinary old tires.

The service life of these garden figures large enough, since the rubber is durable material, which withstands temperature changes and dampness. In addition, rubber is easy to process and can take on the most bizarre shapes.

By spending a little of your precious time, you can make a flowerbed from tires, figures of various animals (swans, elephants, horses, parrots, turtles, etc.), children's swings or sandboxes, decorative statues, flowerpots, exercise equipment for sports and much more.

Options for garden figures made from car tires

To work you will need the following tools: electric jigsaw, jigsaw file with reverse teeth, knife, electric drill with 3 mm drill, wire cutters - pliers and metal saw, grinder.

The materials needed are: a metal rod 1-1.2 meters long, pieces of thin wire, chalk for markings, brushes and paint, black (if the swan is black), white (if the swan is white) and red for the beak.

You'll need: 4 ordinary tires, 2 lids from plastic cans and a metal strip.

Tires need to be dug into the ground at different levels in ascending order, then painted in green color. The caterpillar antennae are bent from a metal strip and secured with self-tapping screws. The “eyes” must first be painted and dried, and then also secured with self-tapping screws.

1.

2.

3.

4.

5.

You'll need two tires of different diameters (one for the body, the other for the head), linoleum, pipe, plywood or wood, thick rubber and facade paints.

The bunny's body and head are connected using a pipe. The holes in the tires are cut using a grinder. On the section of pipe between the head and body, it is necessary to drill a hole in the pipe for easier assembly and transportation. The bunny's bow is cut out of iron or wood and attached to a pin in a drilled hole.

Plywood is secured to the tire rim using self-tapping screws. At the same time, the circumference of the plywood is lubricated with sealant for strength. Linoleum is glued on top of a sheet of plywood using liquid nails. On the inside, the same sequence of procedures is performed.

The paws (front) and ears are cut from thick rubber. You can use the same tires for this. For support, two medium-diameter tires are used as the hind legs, which are dug into the ground. Now you can start painting. It is necessary to paint in two layers.

Recently, the boundaries of applied art have expanded to unprecedented proportions and even more improvised materials have been used.

To decorate summer cottages or garden areas In homes and playgrounds, it is beneficial to use decorative crafts based on tires.

Because rubber is very pliable and allows you to create unique modifications of flower beds, furniture elements, flowerpots and even amazing figurines resembling animals.

How to learn how to make all these delights?

To begin with, you can familiarize yourself with existing photos crafts made from tires to make sure this idea is real. A creative approach allows you to transform a dull tire into an element that complements the landscape decor.

To do this, you just need to use your imagination and arm yourself necessary tools. You will definitely need a knife with a well-sharpened blade, gloves; it is convenient to use chalk and paint to mark the contours. It is advisable to start by creating a sketch of the object planned for implementation.

All kinds of crafts from car tires are created quite easily because it is easy to work with. It is ideal for use based on open spaces. Its characteristics allow it to withstand variability environment and weather component.

The charm of invented elements for a summer house or playground can give off their warmth for many years. But do not forget that rubber can become very hot when exposed to the sun.

Therefore, furniture elements made from it added to the decor should be covered with something, otherwise it will be very uncomfortable to sit on them. In any case, there are more benefits. They are very easy to care for. Occasional washing with soapy water will be required.

What can you create?

To decorate the selected area, you can make crafts from tires with your own hands. For example, these could be amazing figurines in the form of animals. Complete similarity is not necessary in this situation, since it is difficult to achieve.

However, you just need to make holes in several tires, bend them here and there, and now you have a charming image of a bear cub, giraffe, dog, huge elephant, small turtle, donkey, frog or bloodthirsty crocodile, terrifying the visitors of your impromptu zoo.

If this doesn’t seem enough, there is an opportunity to continue the flight of fantasy and try to portray Luntik, Fixies or other cartoon characters. Children will especially like this. It is important to remember that as a finishing touch it is necessary to complement the products with authentic painting. The crocodile should be green, the bear brown, and so on.

In principle, this may not be very simple for everyone. Then you can only limit yourself simple products. Crafts made from tires for the garden also look very good. The easiest way is to create a flower bed for different flowers.

However, with a little more creative effort, it is possible to make unique versions of flowerpots and flowerpots. They are convenient for adding soil and replanting plants.

Summer residents have long noticed that it is beneficial to use tires to form compost wells by installing tires on top of each other. And it’s easy to make swings, stylish fences, steps, children’s sandboxes and even chairs.

How to use them to decorate a playground?

In fact, it is children's crafts made from tires that are the easiest to create. This is due to the fact that children's imagination has no boundaries and they will be interested in everything. Even if the product slightly resembles a lion or other animal, it will cause a storm of emotions, and will force children to spend a lot of time playing with it.

Based on a few old tires, you can create decorations for the playground, creating a unique atmosphere of a fairy-tale town. Kids will enjoy spending their time here, and it will help boost their intelligence development.

Let's look at several products for children

Now we will actually conduct a master class on DIY tire crafts based on creating a sandbox. Children love to use sand for their games, because of this they will be happy about the fact that such a place appears.

However, for this product it is best to take a tire from KAMAZ, since it is of sufficient size. It must be properly installed on required area and start painting.

To complete it you will have to fill it with enough sand. Children are allowed to be involved in this process, as they will find it interesting.

Image of the sun based on a tire, bottles

It will help decorate almost all playgrounds and gardens. To make it you will need a car tire, some plywood, required amount self-tapping screws, several half-liter plastic containers to create an imitation of star rays.

To create a solid image similar to the sun, it is necessary to mount plywood on the surface of the tire, to outside add bottles, placing them in a circle, decorate the necessary places with yellow paint, draw a smile on the plywood and you're done.

Photo crafts from tires