How to strengthen a hammock in the country. A hammock for a summer house is an ideal place to relax for adults and children (20 photos). Video: how to make a wicker hammock

Related Categorized Posts

26 incredible inventions for the kitchen. An invaluable treasure for any housewife! The kitchen is a place where you can safely experiment every day. To make your culinary experiments easier and more successful, inventors and...

15 original ways decorate a holiday pie: turn an ordinary dish into a masterpiece! Holiday pie - not only tasty dish, which the hostess is proud of. This pie is full of creativity! Even…

These good advice will help your children grow up rich and successful. It's amazing how simple it is! Dani Johnson grew up in a poor family, gave birth to her first child at 17, found herself on the street at 21,...

A hammock is a place to relax, a bed hovering above the ground, it will always be welcome and personal plot, both in the house and in the apartment. When not unfolded, the hammock takes up minimal space, and if installed, it turns into “the coolest bed.”

Mobility is the advantage of a hammock. If you have a couple of suitable supports, then turning a small bundle into a comfortable bed, an air chair, is not difficult. On the street, it is important that the hammock does not come into contact with the ground, so crawling insects are not a threat. This was appreciated by Indians, Mexicans and Brazilians. Later, this product will also appeal to Europeans.

A hammock is usually installed in the following places that are most suitable for this:

• on a personal plot between trees;
• on the open terrace;
• on a large loggia or balcony;
• in a residential attic;
• in a spacious living room.

However, a hammock can be installed in any corner of a private house or city apartment, if desired... A hammock saves space. You can even place small furniture or a bed under it. It can be matched to the design, and it will become the highlight of the interior.

Varieties

The hammock is 1.8 - 2.4 meters long and 1.1 - 1.4 meters wide. All that remains is to choose a suitable space indoors or outdoors for hanging.

You can limit yourself to the minimum - a hammock chair is perfect place for reading, drawing, working with a laptop, etc. It’s uncomfortable to sleep in, but many will enjoy rocking and relaxing. Moreover, it can simply be hung from the ceiling or in a doorway.

There are models with an increased width of up to 1.7 - 2.0 meters for two or even three people. But these models require additional attachment points.

Another option is children's hammocks. They are shorter than usual.

Options with canopy, with mosquito net Great for setting up while hiking or sleeping outdoors.

Availability of side wooden slats, suggests that this model good for larger people.

Maximum weight is the main characteristic. You should be interested in this parameter first of all.

Manufacturers divide hammocks for outdoors and indoors. But this is more conventional, since the hammock you like can be hung anywhere.

Hammocks with a solid fabric base are more comfortable and are the main choice. They are mainly used indoors, where the microclimate is usually comfortable.

Mesh products are used more often outside, in hot weather, as they have excellent ventilation, while fabric ones become too warm. But lying on the mesh ones is not very comfortable because the mesh digs into the skin and leaves marks.

Another significant nuance of choice is fabric. Natural cotton and linen are more preferable for products installed indoors. These materials irritate the skin less, do not rub, and absorb well.


Synthetics - nylon, polyester, etc. are resistant to decomposition, dry quickly, are easy to clean, and this is their advantage when used on outdoors where they are preferable.

An excellent solution for outdoor hammocks is the so-called sailing fabric - strong and durable.

How to install

The easiest way is to hang a hammock between trees, but the thickness of the trunk should be at least 20 cm.
Suspended in the shade of trees, it is a wonderful place to relax.
The supports for the hammock must be of adequate strength.

You can dig in poles for hanging a hammock. But, the immersion depth of the pillars must be no less than 0.9 meters. In this case, the pillars must be covered with stones to this depth or concreted.

The standard distance between supports is up to 3 meters.

If there are no trees or poles, you can use a standard hammock stand made of wood or metal.

Fastening is done under some tension. Over time, the threads stretch and sag occurs.
It must be remembered that the tighter the hammock is pulled, the greater the load on the supports.

The standard suspension height is 1.0 – 1.5 meters. The higher the suspension, the greater the torque that affects the pillars (trees) fixed only in the soil, the more durable they must be.

The fastening points must be located from the edge of the canvas at a distance of at least 0.3 meters.

To secure the hammock, nylon ropes with a cross-section of 10 mm or more can be used. To prevent the ropes from rubbing against the support, eyelet, or carabiner, plastic thimbles should be used under them.

For attachment to various supporting structures, including for a solid wall, additional devices are available - anchor bolts, staples, carabiners, eyes, thimbles...

How to make a hammock with your own hands

Some simple tips about how to make a hammock yourself, having suitable material in stock.

Mexican version of a hammock.

This hammock will be sticky. To get some elasticity, you need to put a mat between the layers of material.

How to make the Brazilian version.

Doing all this with your own hands is not difficult, especially if you have sewing machine And free time which can be spent on handicrafts. The result is a hammock - a chair-bed floating in the air - an excellent place to relax.

The history of the origin of hammocks dates back to the Mayan tribe. It was they who came up with the idea of ​​getting off the ground and resting, swinging in the air. They made similar beds from tree bark and called them “hamak”.

Sofas, chaise lounges and armchairs are banal and boring pieces of furniture for everyone. Therefore, everyone who has a dacha or a private house I just have to have a hammock. After all, resting in it allows you to relax all the muscles of the body, and is also a great place for reading and drinking tea. Currently, there is a huge selection of ready-made hammocks of various types, but you must agree that relaxing in a hammock made with my own hands doubly nice. Therefore, let's talk about how to create a hammock with your own hands.

Types of hammocks

Manufacturers of hammocks, competing with each other, are constantly improving their products and producing more and more new types. Currently the most popular are considered the following types hammocks:

Hanging hammocks are traditional look. Its popularity is due to the fact that it is light in weight and easy to install and dismantle.

Frame hammocks can have a wide variety of shapes. They differ in that they can be installed absolutely anywhere; you don’t need to look for trees or poles for them. Their strength is also their advantage.

Non-standard hammocks - differ in their interesting design. The most popular models of custom hammocks are: a chair hammock, a hammock swing and a hammock with a canopy.

Technology for creating a hammock with a frame with your own hands

Making a frame

To make the frame you will need:

• two beams 245*10*5 cm;
• two beams 180*10*5 cm;
• two beams 120*10*5 cm;
• eight bolts M10*160mm;
• four bolts M10*140mm;
• 24 M10 washers;
• 12 M10 nuts.

The work of making the frame consists of the following steps:

Making the base

First way

You don't need any special skills to make a hanging hammock. You just need to have:

• sewing machine;
• a piece of thick fabric of a suitable color;
• strong rope (40 m);
• needles for sewing machine №90-120;
• triangle;
• scissors;
• measuring tape;
• knife

Step 1. Prepare the base.

When choosing fabric for the base, preference should be given to fabrics with a fabric width of 3.6 m. You can calculate the length of the hammock as follows: add 60 centimeters to the height of the tallest family member, which will be used for allowances.

The first step is to straighten the edges using scissors. Next, markings must be applied on both narrow sides of the fabric every 18 cm. According to the markings, the fabric is cut by 30 cm. These cuts are necessary for the subsequent creation of a drawstring (the folded edge into which the rope will be pulled). Then all the edges of the fabric are hemmed, making a hem of 10 cm. In the places of the cuts, additional zigzag stitches should be made for greater strength.

Step 2. Making the drawstring.

The drawstrings will be located on both narrow sides of the canvas. The cuts made in advance in 2 layers are folded and then stitched with double seams.

Step 3. Making loops and preparing the rope for installation.

The rope is threaded through the drawstrings so that there is a margin of 180 centimeters. And from all the slots they pull out one meter. The two ends of the rope are tied on one side with a “bayonet with two hoses” knot. At the same time, 4 loops that are in the middle are pulled forward a little, straightened, and tied behind top part bend, then collected together and wrapped with rope. To wrap these loops you will need about 10 meters of rope.

The transverse winding begins after all the loops have been laid and the rope has been secured. It is better to make a longitudinal loop from a thinner rope; the length of this loop should be about 0.5 meters. The longitudinal loop ensures reliable fastening of the ends of the winding. The final turns should be pressed against each other as much as possible and should not overlap each other.

Before starting to wind the longitudinal part of the fixing loop, a rope is pulled into it. When the fixing loop is completely wrapped, both ends of the rope are combined and wrapped together. After two turns are made, the ends of the rope are tied into a strong knot.

Step 4. Fastening.

The hammock can be attached to two nearby trees. Also, reliable fastenings can be pillars dug in nearby or a stand made by yourself.

Step 5. Design.

To make relaxing in a hammock even more enjoyable, you can sew pillows for it. Pillows that have a contrasting color to the hammock look beautiful. You can use holofiber, padding polyester or down as a filler for pillows.

Second way

You will need:

• about 3 meters of tarpaulin (you can use other durable material);
• 22 eyelets;
• tools for installing eyelets;
• 35 meters of rope having a diameter of 6 mm;
• 2 metal rings;
• drill with 12 mm drill bit;
• beams from hardwood(2 pcs.) size 30*50mm, the length of the bars should be equal to the width of the hammock;
• sewing machine.

Step 1. Create the base.

If the hammock will be under open air, then when choosing a fabric it is better to choose a material that is resistant to getting wet, for example, tarpaulin. If there is a roof over the hammock, then you can use any thick fabric.

The edges of the selected fabric are folded 6 cm and hemmed. To make hemming easier, the hem is ironed. It is better to place a hemmed hem with bottom side, so he will be invisible.

If the fabric is thick enough, then side edges you don't have to hem it.

Step 2. Installing eyelets.

Before installing the eyelets, mark their attachment points with chalk or a pencil.

The eyelets should be located on the narrow side of the material at the same distance from each other. 11 elements must be installed on each side.

Round holes are cut out in the places marked for the eyelets.

They don't have to be perfectly round, just the right size. Once the holes are cut, you can begin installing the eyelets themselves, using special tools.

Step 3. Making a wooden spacer.

Spacers are bars with holes for pulling the rope. The spacers are designed to keep the hammock from collapsing under load.

The length of the bars, as already mentioned, should match the width of the hammock, and the holes should be exactly opposite the eyelets. The timber must have a thickness of at least 25 mm and a width from 50 to 120 mm. Finished bars must be sanded and varnished.

Step 4. Attachment

The first step is to install the slings; for this you can make a special frame, but you can do without it. On a hook fixed in the frame, install metal ring. The base material of the hammock is laid out on the floor and secured with something heavy. Next, the spacer is installed.

Each sling is threaded through a separate grommet, then into the hole in the spacer, and then into the ring, after which the sling is returned back. After the slings are threaded through all the holes, the ends of the rope are tied.

To create a small decorative effect You can braid the ends of the rope into a ring. The same operations are performed with the opposite end of the hammock. The finished product is installed on any suitable supports.

Advice ! If you use supports for the hammock that you dig in yourself, then the distance between them should be greater than the length of the hammock so that over time, when it sags, you do not have to reinstall them, because it is much easier to tension the hammock itself.

And we decided to try it out on our next trip. If you are not a sailor or a climber, then you have a legitimate question: “How to hang a hammock between the trees?” You have to somehow tie a knot so that it holds tightly and can be untied. This is what I want to talk about today.

There are a lot of different ways and knots with which you can hang a hammock. And for starters, probably the most famous knot that allows you to tie a non-tightening loop is bowline.

Bowline.

This knot is very simple to knit, holds securely and is not difficult to untie afterwards.

To prevent the rope from sliding down the tree trunk, simply wrap it around the tree several times and then tie a knot.

To be safe, do not forget to tie a control knot at the end of the rope. Even if the main knot weakens for some reason, the control knot will not allow the main one to come undone.

In general, there are a lot of different knots that allow you to securely fasten the rope to a support. I highly recommend you consider different variants and choose the most suitable one for yourself.

Noose noose.

For example, the simplest noose noose will also allow you to securely tie a rope to a tree.

An easy to untie running simple knot.

Well, one more for the heap untied running simple knot, which tightens the noose around the tree. It is very easy to knit, and to untie it, just pull the free end of the rope.

To prevent this knot from accidentally coming undone, insert the free end of the rope into the resulting loop.

The bark of many trees is very rough and, naturally, when rubbing against it, the rope deteriorates a little. In addition, on other trees, on the contrary, the bark is quite delicate, and in this case it is already damaged by the rope.

To avoid such troubles, you can make a couple of ribbons from a wide and strong sling. The ends of the ribbons need to be folded and stitched to form loops, and total length each tape would be about a meter (more is possible).

The resulting ribbons will be wrapped around the tree trunk, and the hammock rope can be secured to the loops. This can also be done in different ways.

Methods for hanging a hammock using sling tapes.

You can put one end of the tape through the loop of the second. You will get a tightening loop. You need to insert a short strong stick into the loop of the second end of the ribbon and throw a loop of hammock rope over it, as in the picture.

If you have a free carabiner, you can wrap the ribbon around the tree and connect the ends with this carabiner. And we hook the loop of the hammock to it.

With the help of sling tapes you will protect the tree bark from damage and the rope from premature wear.

By the way, the loop at the end of the hammock rope should not be tightened with such methods of suspension. It can be tied with the same bowline or a figure eight knot.

Knot for adjusting rope tension.

To easily adjust the tension of the hammock, you can use the method described in last article , using a small plate with two holes. But if there are no devices, you can just as easily use a simple knot like this.

It moves easily along the rope by hand, but if a load is applied to it along the rope, it tightens itself and does not move. At the same time, once the load is removed, it can again be easily moved by hand.

Summer is the time for vacations and trips to the country. What's a cottage without a hammock? How to hang a hammock in the country and which place is best to choose for this is of interest to every lover of rural nature.

Choosing a hammock

A hammock is a product for relaxing and sleeping outdoors. There are several types of hammock:

• wicker, in the form of a mesh;
• solid, like a big towel.

Hammocks come in different textures and materials of manufacture: from canvas, from individual pieces of fabric, woven from plain or multi-colored threads, high density, knitted from rope rope. To choose the right hammock, you need to decide where it will hang: indoors, outdoors or under a canopy.

This determines what material the hammock will be purchased from. If for home or closed terrace, That Any will do material. For the outdoors, you need a heavy-duty, waterproof and comfortable hammock. It is made from polypropylene fiber. If it will be removed under unfavorable weather conditions, then you can choose any one, it all depends on taste and color. A hammock can be hung not only on a tree or between poles, but also as independent design. There are prefabricated hammocks consisting of metal frame and the hammock itself.

Return to contents

Installing a hammock at the dacha

Before hanging a hammock, you need to decide on its location.

1. At home. The place to install the hammock is chosen to be open. This could be an attic, where the ends of the hammock are attached to a beam or wall using a self-tapping hook.
2. On the street. Typically, a hammock is placed between two trees, tied to the trunk.

You can also hang a hammock between two posts dug into the ground with a canopy over it. Here you can use two types of fastening:

1. Tying the ends of the hammock with a rope to the posts.
2. Using self-tapping hooks. They are screwed into the posts, and the rope or hooks at the end of the hammock are attached to them.

To properly hang a hammock in the country, if there are no trees near the house, you need:

1. Choose a place where the hammock will be located.
2. Measure the length of the hammock and add 20-30 cm. This will be the distance between the pillars to be dug in.
3. Dig two holes 1.20-1.30 m deep and place two prepared posts. They must be at least 15-20 cm in diameter. Otherwise, the posts may break off or crack. Align them vertically and bury them, or better yet, fill them with cement mortar.
4. Allow the cement to harden for 24 hours (if cement was used to install the pillars).

Then hooks are screwed into the supports at a height of 1.70-1.80 m, depending on how long the hammock is and how much it will sag from the ground. Do not forget that over time the hammock can stretch, thereby reducing the distance from its lowest point to the surface of the earth. In this case, this distance should be no less and no more than 40-50 cm. If the hammock is stretched out, then redo the fastenings and hang it again.

Scheme for fixing the hammock rope to the carabiners, tied with a grepwein knot.

If you don’t want to tinker with the poles and they don’t fit into the landscape of your dacha, then you can install a frame hammock. To do this, when choosing it you need to consider:

• what kind of base does it have - wooden or metal?
• what are the dimensions of the product (you must first measure the location);
• what is the material from which the hammock is made (it is necessary that it does not fade in the sun, does not lose elasticity and structure, and does not get wet).

When installing a frame hammock, you need to choose flat surface. It should not be near an open fire (barbecue, barbecue fire), as air currents can cause sparks to hit it and cause harm.

There is such a type of hammock as a hammock chair. It is small in size, suitable for both open and closed spaces. Takes up little space and can be located in ordinary room. It can be mounted on a beam or ceiling as a swing (with two fastenings) or in the form of a pear (with one fastening). Hanging a hammock is not difficult: you just need to screw a hook into the base and secure it with a rope or a catching device. It must be remembered that the larger the hook is screwed in, the more reliable the hammock chair will be.

He may have frame base. In this case, it is easy to move it from one place to another.
It can be mounted on a tree and used as a swing. Eat different kinds hammock chairs:

• with footrest;
• in the form of a chair or high chair with a metal or wooden frame;
• wicker;
• made of burlap or other material with the ends tacked on top.