Installer of low-current systems, educational and methodological literature. Installation and maintenance of low-current systems. How does an installer of low-current systems undergo training in our center?

The training module “Low-current networks” is used as a component in a number of advanced training courses at the ARMO Training Center, and is also used in advanced training courses at MGSU.

Objectives of the module “Low-current networks”

Give students an idea of low current systems ah, the order of their design, installation and commissioning. The module covers systems fire alarm, fire alerts, telephone network, computer network, video surveillance system, access control system and dispatch system engineering equipment. The stages of the project, the organization of networks and channel metrics, and the main low-current systems are considered. The module includes regulations, intended for self-study.

The module was developed by the director of the ARMO Training Center, Ph.D. A.I.Falkov

The module includes three presentations:

1. Part 1. Composition project documentation and design procedure low current networks. Presentation in PDF format, 1.2MB Open...

2. Part 2. Channel metrics. Rules for laying low-current networks and channel metrics various types. Presentation in PDF format, 0.9MB Open...

3. Part 3. Review of low-current networks. Overview of building networks of various types - residential, office, industrial. Presentation in PDF format, 3.2MB Open...

Applications of the module “Low-current networks”

The module is accompanied by documents for self-study:

1. Government Decree Russian Federation dated February 16, 2008 N 87 Moscow “On the composition of sections of design documentation and requirements for their content.” Open...

2. RD 25.952 Guidance document. Systems automatic fire extinguishing, fire, security and fire-security alarms. Design standards. Open...

3. GOST R 50775-95 (IEC 839-1-1-88) State standard Russian Federation "Systems alarm system" Open...

4. RD 78.145-93. Systems and complexes of security, fire and security and fire alarm system. Rules for production and acceptance of work. Open...

5. SNiP 3.01.04-87 Acceptance into operation of completed construction facilities. Basic provisions (with Amendment No. 1). Open...

6. GOST 2.601-2006. one system design documentation. Operational documents. Composition and completeness operational documentation. Open...

7. GOST 28384-89. Telephone stations. Parameters of informational acoustic signals of voice frequency. Open...

8. Norms fire safety NPB 88-2001 "Fire extinguishing and alarm installations. Design standards and rules" (approved by order of the Main Directorate of State Fire Service of the Ministry of Internal Affairs of the Russian Federation dated June 4, 2001 N 31) (with amendments and additions). Open...

9. GOST R 51241-2008 Access control and management means and systems. Classification. Are common technical requirements. Test methods/ Open...

10. GOST 24402-88 Teleprocessing of data and computer networks. Terms and Definitions. Open...

The DPO Academy offers training in the design and installation of low-current systems. Professionals in this field must navigate the capabilities of a wide range of equipment in order to select the optimal one for each system. Also, craftsmen must have certain skills and knowledge in order to effectively maintain communications and repair them if necessary.

We offer installation courses for installers in Yekaterinburg in the following areas:

• ACS,
• CCTV,
• fire alarm and fire alarm system,
• telephony, internet and others.

Come improve your skills

Sign up for design courses in Yekaterinburg, which are conducted by experienced specialists. Our programs will help improve the level of professionalism, correctly prepare accompanying documentation, and learn the rules and safety standards. Upon completion of the courses, you will receive an appropriate certificate that will help you take a higher-paying position.

Use the form provided on the page to sign up for training in the installation of low-current systems. You can also contact our specialists by phone. The constant development of technology has made it necessary for specialists in the field of installation of any low-current systems to regularly undergo retraining in order to keep abreast of all the new products in the industry and provide services at a high professional level.

We guarantee high quality education

The Academy of DPO has been training designers and installers for many years and has only positive reviews. We strive for our students to receive maximum information, after completing the courses they have the opportunity to use all the achievements of innovative technologies in their work, to be able to service not only communications created by themselves, but also to understand the features of a configuration developed and implemented by another specialist. Comprehensive comprehensive training – unchanged business card DPO Academy.

Class schedule

Please check with the managers for the exact cost of training.

Training in installation of low-current systems. Training course for specialists in the field of design and installation modern systems video surveillance.

Purpose of the course:

• provide systemic knowledge about the process of translation and distribution TV signal;
• introduce various systems video surveillance and their structural elements;
• teach to work with wiring diagrams, determine parameters and select equipment depending on the task;
• develop skills in installing and configuring equipment necessary for a specialist installer of low-current systems.

Learning outcome

Knowledge:

• principles of analogue and digital television signal formation;
• main components and structure of CCTV;
• types of television cameras, lenses and their characteristics;
• protection, control and switching devices for video cameras;
• sequence of installation of wired and wireless video surveillance systems.

Skill:

• design CCTV systems that perform specific tasks;
• select, install, configure, synchronize, and put into operation video surveillance system equipment;
• install additional power supplies and elements of the video surveillance network.

Duration of training for installation of low-current systems:

• The theoretical part of the course is designed for 52 ac. hours of preparation;
• practical lessons for practicing skills of connecting and setting up equipment - for 12 ac. hours;

Target audience of the course:

• electrical engineering personnel wishing to obtain additional specialization;
• security officers interested in obtaining comprehensive knowledge about the capabilities of video surveillance systems;
• employees of enterprises specializing in providing technical means security;
• anyone who wants to become a specialist in the installation of low-current systems and video surveillance.

Documents upon completion of the course:

• a certificate of the established form with the qualification of an electrician of video surveillance systems.

Initial training requirements:

• elementary basic knowledge in the field of electrical engineering.

Course curriculum

Lesson 1

Subject. Television signal its transmission:

• Methods and means of transmitting a television signal, types of cable.
• TV signal parameters. Frame format, number of lines, frame rate.
• Formation of a television signal. Color signal systems.
• Analog and digital television signal.

Lesson 2

Subject. Purpose and capabilities of CCTV:

• CCTV systems.
• Tasks of closed circuit television.
• Composition, structure and main components of CCTV.

Lesson 3

Subject. TV cameras:

• Television camera device.
• Receiving a television signal.
• CCD charge-coupled device (matrix). Image sensor.
• Main types of cameras and their characteristics.

Lesson 4

Subject. TV camera lenses:

• Types of lenses.
• Optical and photometric parameters of lenses.
• Image quality, lens resolution.

Lesson 5

Subject. Video-to-image conversion devices (monitor):

• Cathode ray tube monitors, plasma and liquid crystal monitors.
• Monitor quality parameters.
• Using monitors.

Lessons 6 and 7

Subject. Switching, control and protection devices for video cameras:

• A device for rotating and tilting a video camera.
• Housings and camera bodies. Thermal housings.
• Screen divider. Multiplexer.
• Video switcher.
• Video recording device
• Control panels and infrared illuminators.
• Video capture cards.
• Software video signal registration.
• Video motion detector.
• Video amplifier distributor.
• Video generator (overlay device) additional information to the image).
• Video corrector (a device that corrects unequal losses in the frequency range and/or phase errors during video signal transmission.
• Synchronization tools (linking equipment to one power source).

Lesson 8

Subject. Installation of video cameras:

• Mounting the video camera on a bracket.
• Hidden video cameras, video peephole.
• Installation of a street camera.
• Installation of an outdoor color camera in a sealed housing.
• Installation of a wireless camera.

Lesson 9

Subject. Installation and configuration of the DVR:

• Installation of an analog recorder, switching on and setting up.
• Setting up a digital video recorder.
• Usage personal computer as a video recorder.

Lesson 10

Subject. Installation of a wired video surveillance network:

• Pad cable lines in a tray, in a plastic box, open method.
• Installation of additional power supplies.
• Installation additional elements video surveillance networks.

Lesson 11

Subject. CCTV system design:

• Viewing area and basic requirements for its selection.
• Estimation of required image detail.
• Calculation of the lens for a given viewing angle.
• Selection of equipment for CCTV system.

Lesson 12

Subject. Installation of CCTV system:

• Installation of a wired CCTV system.
• Installation wireless system CCTV.
• Setting up the server station and putting it into operation.

Lesson 13

Subject. Examples of CCTV systems:

• Analogue CCTV systems.
• Digital CCTV systems.
• Manufacturers of equipment for video surveillance systems.

Lesson 14

Subject. Learning how to use a CCTV camera ( practical part).

Lesson 15

Subject. Studying the construction of an analogue video surveillance system (practical part).

Lesson 16

Subject. Studying the construction of a wireless video surveillance system. Software(practical part).

The training module “Low-current networks” is used as a component in a number of advanced training courses at the ARMO Training Center, and is also used in advanced training courses at MGSU.

Objectives of the module “Low-current networks”

To give students an idea of ​​low-current systems, the procedure for their design, installation and commissioning. The module covers fire alarm systems, fire warnings, telephone networks, computer networks, video surveillance systems, access control systems, and utility dispatch systems. The stages of the project, the organization of networks and channel metrics, and the main low-current systems are considered. The module includes regulatory documents intended for self-study.

The module was developed by the director of the ARMO Training Center, Ph.D. A.I.Falkov

The module includes three presentations:

1. Part 1. The composition of design documentation and the procedure for designing low-current networks. Presentation in PDF format, 1.2MB Open...

2. Part 2. Channel metrics. Rules for laying low-current networks and metrics for various types of channels. Presentation in PDF format, 0.9MB Open...

3. Part 3. Review of low-current networks. Overview of building networks of various types - residential, office, industrial. Presentation in PDF format, 3.2MB Open...

Applications of the module “Low-current networks”

The module is accompanied by documents for self-study:

1. Decree of the Government of the Russian Federation dated February 16, 2008 N 87, Moscow “On the composition of sections of project documentation and requirements for their content.” Open...

2. RD 25.952 Guiding document. Automatic fire extinguishing, fire, security and fire-security alarm systems. Design standards. Open...

3. GOST R 50775-95 (IEC 839-1-1-88) State standard of the Russian Federation “Alarm systems”. Open...

4. RD 78.145-93. Security, fire and security-fire alarm systems and complexes. Rules for production and acceptance of work. Open...

5. SNiP 3.01.04-87 Acceptance into operation of completed construction facilities. Basic provisions (with Amendment No. 1). Open...

6. GOST 2.601-2006. Unified system of design documentation. Operational documents. Composition and completeness of operational documentation. Open...

7. GOST 28384-89. Telephone stations. Parameters of informational acoustic signals of voice frequency. Open...

8. Fire safety standards NPB 88-2001 “Fire extinguishing and alarm installations. Design standards and rules” (approved by order of the Main Directorate for Fire Safety of the Ministry of Internal Affairs of the Russian Federation dated June 4, 2001 N 31) (with amendments and additions). Open...

9. GOST R 51241-2008 Access control and management tools and systems. Classification. General technical requirements. Test methods/ Open...

10. GOST 24402-88 Teleprocessing of data and computer networks. Terms and Definitions. Open...

The PromProfAlliance training center invites individuals and groups of students from organizations to train as installers of low-current networks. The programs are designed to master a profession from scratch, improve qualifications, including after a long break in professional activity, retraining of specialists in related specialties.

Training is provided for installers of low-current systems in the following areas:

• fire alarm;
• CCTV;
• ACS;
• SOUE;
• telephony;
• Internet, etc.

What do low-current systems installer courses teach?

• Design of television, Internet, radio systems for specific purposes.
• Device and types of equipment, methods of its installation.
• Selection, installation, configuration, synchronization, launch.
• Installation of additional power supplies.
• Detection of defects and repair of cables, parts, equipment.
• Safety precautions during work.
• Standards of acceptance documents (GOST, SNiP, RD, PB, etc.).

How does an installer of low-current systems undergo training in our center?

Provided different shapes taking courses. You can choose full-time, correspondence or distance learning of theoretical and practical material. Classes are taught by highly qualified specialists in this field. They are underway different quantities hours, depending on the program. If you want to study without interrupting your main activity, you can attend a weekend group or master the material remotely at any time. Low-current systems installer courses end with certification; testing can also be taken online without coming to the center. Citizens with primary, secondary and higher professional education are accepted.

Certificate for installer of low current systems

Systems with low power consumption cannot be called vital, but today it is impossible to imagine any office, enterprise or residential building without them. After training, you will be able to design, install and repair them, allowing the equipment to operate properly and manage its functionality. To do this, you need a certificate as an installer of low-current systems. After completing the courses at our center, you can receive it in person, by mail or by courier. Graduates are also given a protocol from the certification commission. Thanks to the permit, you will be able to perform the relevant work without fear of being fined by inspection authorities.