How to make a soap dish with your own hands from wood. Homemade soap dish for liquid soap. Hand-made lessons on creating interesting interior accessories

A DIY soap dish is an original element of the kitchen and bathroom interior, attracting the attention of others with its unique design. Compared to high-tech analogues equipped with a touch screen and magnetic holders, unusual accessories in the form of shells, rosebuds and wicker boxes look especially elegant. Exclusive household items designed to hold soap in tandem with others homemade parts furnishings - towel holders, shower curtains and rugs will allow you to create an individual interior genre for decorating a room for ablutions.

An original do-it-yourself soap dish is ideal for decorating not only bathrooms in the house, but also for decorating a washbasin or summer shower room located on the territory personal plot. If you are planning to make a soap stand intended for use on fresh air, then it is necessary to select raw materials that can withstand intense exposure to ultraviolet radiation and gusts of wind. Due to continuous contact with water, to create beautiful accessories it is necessary to use materials that have excellent moisture resistance and hygroscopicity. As a result correct selection raw materials and decorative elements You will be able to make a stylish and functional accessory.

Selection of materials for creating soap stands

A DIY soap dish allows you to add a personal touch to your shower room decor. In order for it to organically fit into the outline of the stylistic concept, it is necessary to correctly select the basis and Decoration Materials to create an original furnishing detail:

If the bathroom is designed in a manner Mediterranean style design, then to decorate the decoration you must use shells, pebbles, river sand, dried seaweed, sea stars and other themed decorations.
If the ablution room is decorated in the traditions of country, chalet, ethnic, colonial or eco-style, then preference should be given natural materials, personifying natural motifs: tree branches and logs, dried flowers, acorn caps, sunflower or pumpkin seeds.
If the shower room is decorated in a loft style, then you should select non-trivial items to decorate the soap dish for the bathroom: fragments drainpipe, clinker brick or unhewn board.

Unique DIY soap dish made from scrap materials for a long time will not lose its effectiveness pristine appearance, if her outer part Cover with quick-drying varnish, and line the inner cavity of the container with a moisture-absorbing gasket. If you want to place this accessory on a wall or any other flat vertical surface, then you should make a magnetic soap dish with your own hands or equip it with strong suction cups. Magnetic holders can withstand a heavy base with soap, and silicone suction cups can withstand lightweight products made of plastic or any other polymers.

When selecting materials to create a soap stand, you should study their performance properties in detail, since moisture is incompatible with polymer clay, metal and wood. These types of raw materials can be used to decorate decorative items intended to decorate the interior of a restroom, bath or kitchen.

Hand-made lessons on creating interesting interior accessories

A DIY soap dish will highlight the talented abilities of the owners of the house and will become an interesting piece of furniture. Most in a simple way To create an exclusive soap reservoir is to use plastic containers. These junk items household products have high levels of plasticity and moisture resistance. Therefore, they are great for creating a variety of decorative items: flower pots, garden figurines, food dispensers and containers for storing various things.

To make a beautiful tank in the shape of a flower with wide open petals, you need to prepare the following materials:

flambéing gun – gas burner, which allows you to easily and quickly change the shape of the plastic;
container from mineral water or carbonated drink;
sharp scissors;
ruler;
acrylic paint green and yellow color;
a thin and wide brush with medium-hard bristles made of squirrel hair.

From one plastic container you can make two bathroom accessories - a reservoir and a dispenser designed to hold soap in liquid and solid form. As a result of following the step-by-step instructions, you will be able to make an original soap dish with your own hands, photos of which can inspire true connoisseurs original accessories interior design to complete a simple master class:

Cut a plastic bottle into two halves. Bottom part should be used to create a stand, and the upper fragment of the container should be used for a dispenser.
Measure 7 centimeters from the bottom of the bottle with a ruler and make a mark on the plastic surface.
To the marked line, cut out the leaves of the flower into a triangular oblong shape. On sheet-shaped elements, it is necessary to make cuts diagonally on both sides.
Make small cuts in the mark area, where at the final stage of decoration you will need to carefully place the sharp-angled end part of the flower leaves.
Using a flambéing gun, at a remote distance from the bottom of the container, it is necessary to give plastic container the shape of the curved petals of the inflorescence.
All parts of the product must be coated with green and yellow paint. After the paint has dried, you need to cover the soap stand with acrylic varnish.

Before you make a soap dish with your own hands, you should determine the size of the tank that corresponds to the free space on the bedside table in the restroom or the shelf of a hanging shelf in the bathroom. If there is not enough free space to place it, it is necessary to supplement the product with silicone holders or magnets.

An alternative way to decorate this bath accessory could be to transform a ceramic flower stand. It will act as a base, which should be decorated in a chaotic manner with multi-colored fragments of ceramic or beveled tiles. To fix them, use tile adhesive and tweezers. The result will be an interesting accessory with a mosaic ornamental design.

A DIY soap dish is a great gift for friends, colleagues and relatives. This practical thing is an indispensable attribute of the bathroom and shower room. The Westwing shopping club presents a large collection of various stylish accessories interior made from quality materials.

21 chosen

For several months I admired the soap made and given to me Any. When the time came to try all this “yummy” food, I thought about how and what to store small masterpieces. Simple soap dishes are not the right shape, and it’s not interesting to put a hand-made exclusive into a simple store-bought plastic one. And I decided to make my own “soap dishes” for each piece of soap.
I already had some experience in creating Christmas balls from plastic bottles from water. And the material seemed suitable to me, and besides, it can be different colors. Here's what I ended up with...

Green leaf

I made it from the side of a green bottle. First, we prepare a large rectangle by cutting the bottle along the seam with a stationery knife and cutting off both edges. Then use regular scissors to cut out the required form future leaf. Finally, we need hot air treatment to deform the material the way we need it. To do this, hold the product high above the gas burner or just above the lighter. When starting heat treatment, it is important not to overheat, so as not to get burned, and only slightly bend all the pointed edges without touching the middle - there will be a bed for soap. You can place any rectangular or elongated piece in the finished soap dish.

Pink shell with pearl

Some water bottles have a ribbed surface that resembles the design of a shell in which a pearl grows. The shape of the neck of such a bottle (especially if it Pink colour), almost everything you need. We cut off the neck, cutting it off to form a wavy line along the edge of the “funnel”. We divide it diagonally into two parts (leaving only the connection at the very base). For greater similarity, both halves need to be flattened a little; to do this, put the workpiece under a press for a couple of hours (for example, under a stack of magazines). We process only the very edges with hot air to form a smooth and non-sharp line. Finally, it would be nice to cover the top “cover” with mother-of-pearl inside, lower with outer. I didn’t have real mother-of-pearl, but I did have a good varnish the color of pink mother-of-pearl. After drying the shell, all that remains is to place the soap “pearl” in it.

floating water lily

A water lily is made from the bottom of a bottle. Using a stationery knife, cut off the entire circle 2 cm above the legs. Then we move on to heat treatment. Hold carefully while heating inner surface the edges. If you heat it evenly from all edges, the water lily will turn out even. You can already use it. Moreover, not only as a soap dish, but also as a floating decoration, and even as a candlestick for a warming or other small candle.

Box with bows

Draw a rectangle on the bottle with adjacent rectangular sides. Cut according to outer edge, bend and sew adjacent edges with beautiful threads. We tie knots and bows at the ends of the threads. It’s good if there is some kind of design stamped on the bottle - on my soap dish there are pigeons “sitting” on the sides.

How to make a soap dish with your own hands from scrap materials that can always be found in household clutter.

When designing such a product, and then subsequently manufacturing it, you should always be guided by the following requirements:

Minimum number of parts
ease of manufacture
use of moisture-resistant material
protecting soap from exposure external environment, or in other words, provide a lid in the design of the soap dish
corresponding appearance

The isometric figure shows the box assembly diagram and its detailing.

1. Side wall.
2. Back wall.
3. Front wall.
4. Bottom.
5. Cylindrical metal pin 3 x 20 (mm).

Reference:
Cylindrical metal pins can be made from ordinary construction nails of the appropriate diameter.

SIDE WALL

LID

Specification of materials dimensions (length, width, thickness):

Rear wall 130 x 40 x 10 (mm)
front wall 150 x 50 x 10 (mm)
bottom 130 x 90 x 10 (mm)

The material used to make the washbasin soap dish is moisture-resistant plywood 10 (mm) thick.

How to make a soap dish with your own hands for or manufacturing technology:

1. Cut out blanks from plywood, strictly observing their dimensions, parallelism and perpendicularity of the edges.
2. Mark the center of the holes for the pins.
3. Drill holes to the desired depth.

Reference:
The centers of the holes in the parts to be joined must match exactly. The holes are drilled strictly perpendicular to the edges, otherwise difficulties may arise during assembly. When drilling, it is best to use a metal jig that you can make yourself.

4. Insert the glue pins into the holes in the side walls of the soap dish box.
5. Connect the back and front walls, the bottom with the side walls with glue pins.
6. Use clamps to compress the assembled box and allow the glue to dry.
7. Smooth the rough edges of the box and finish the least visible parts and finish with the front surfaces.
8. Surface finishing. Apply with a brush thin layer varnish After drying, sand the surface with fine sandpaper, then wax the surface.
9. Install the cover on the pins 3 x 20...30 (mm)

A soap dish is an essential attribute of any bathroom. Nowadays people are increasingly moving away from classic soap bars in favor of more convenient liquid soap, which can be poured into the dispenser. However, progress does not stand still, and now you can find on sale such a miracle of technology as a contactless soap dish. Just imagine - you put your hand up, and soap and magic immediately pour on it, and that’s all, isn’t it?

Magic is magic, and a contactless soap dish is a very real device that you can assemble yourself without much difficulty. By decorating such a soap dish in a beautiful case and replacing the previous manual dispenser, you can make the process of washing your hands fun and enjoyable even for the most dirty person. So, go ahead, get to work, or rather, get your soldering iron!

First, let's look at the diagram and try to understand how it all works. The whole circuit consists of two pieces - an IR signal transmitter and a receiver of the same IR signal. More precisely, these are two different schemes that are created for collaboration. Those. then, when nothing prevents the transmitter from illuminating the receiver with a signal, the relay is turned off, the soap does not flow.

As soon as we bring our hand, which needs to be washed, the visible connection between them is broken, the receiver loses the signal, the relay opens, the pump starts, the soap flows. This is the magic. Regarding the pump - I used a simple diaphragm pump bought on Aliexpress, you can use any one that is capable of pumping thick soap and is suitable in size.

Transmitter circuit

A few words about the IR signal transmitter. It is based on the NE556 chip, which is essentially a milked 555 timer. If a regular timer continuously generates pulses, this one creates bursts of pulses. For some time there are impulses, for some time they are not, and all this happens very, very quickly, you won’t have time to blink an eye. The frequency of the pulses themselves is 36 kHz. Electricity turns into infrared light thanks to IR LEDs HL1 and HL2, which can be easily found in remote controls remote control. For our purposes, one LED is enough, so the second one can be safely removed, but resistor R2 should definitely be changed to a higher resistance one, for example, 1 kOhm. The power of the emitted signal will depend on its rating. Because The distance from the receiver to the transmitter in our case is not at all great, excess power will only do harm.

Receiver circuit

So, we've sorted out the transmitter, now let's move on to the receiver. Its key link is the TSOP 1736 IR receiver. You can use any other similar receivers, the main thing is that they are designed for a signal frequency of 36 or 38 kHz; the easiest way to pick them out is from a dead TV. When the LED transmitting the signal shines on this same TSOP receiver, the voltage at its output is zero (log. 0), accordingly, the field-effect transistor VT1 is closed, the relay is de-energized, the pump is de-energized, and the soap dish is in standby mode. As soon as someone's palm gets in the way of the light transmitted by the transmitter, the TSOP receiver stops receiving bursts of pulses, the voltage at its output rises (logic 1), the transistor opens, supplies voltage to the relay, which, in turn, starts the pump. To stop the flow of soap, simply remove your hand. The HL1 LED signals the supply of soap. The operating principle is clearly shown in the following picture:

The supply voltage for both the receiver and transmitter is 12 volts. The good thing about the scheme is that it operates clearly, without any delays. You can substitute and then remove your hand without fear that a stray drop of soap will fall past. Photo of the device I assembled:

Happy assembly to everyone!

Discuss the article HOMEMADE SOAP DISH FOR LIQUID SOAP

When arranging the interior of a bathroom, it is necessary not only to resolve issues of proper finishing and installation of plumbing fixtures, but also to select the most functional and aesthetically attractive accessories. To make hygiene procedures comfortable and enjoyable, you should equip the room with a convenient soap dish.

Features of choice

Keeping soap on the sink is neither convenient nor hygienic. Therefore you need to take care of convenient accessories. The soap dish must be functional and made from quality materials. But we should not forget about appearance. Therefore, it is advisable to pay attention to the following nuances:

It is advisable to ensure a harmonious match not just with the style of the bathroom, but with the appearance of other accessories, for example, hangers, curtains or mirrors.

It is preferable to provide a unified stylistic solution. Therefore, it is recommended to purchase sets of soap dishes for the bathroom, which come complete with other fixtures and decorative elements.

It is also necessary to evaluate the size of the room. If your bathroom is spacious, then you can choose large structures, such as wall-mounted liquid soap dispensers. If there is little free space, then it is advisable to hide the dispenser under the sink or purchase compact soap dishes for solid soap.

Devices for liquid and solid soap

Types of soap dishes for the bathroom differ both in the type and shape of the substance used, as well as in the methods of fastening, manufacturing methods, etc. But most important parameter is precisely the characteristic of the detergent.

Structures for solid remnants

These soap dishes are a standard option as solid bars have been used in our homes for many years. It is difficult to imagine a bathroom where the sanitary fixtures did not include a soap container design.

The soap dish may have different shapes, color, fit into another item, be equipped with additional gadgets, for example original lighting. Plastic, wood, glass, and metal are used for manufacturing. This classic bathtub is placed on the sink or firmly fixed to it.

There are also modifications wall mount. This can be a regular suction cup model or a more advanced modification that requires fastening with special mounting kits, for example, a design with a chrome rim.

The soap dish is often removed and placed on the sink. It’s even more convenient to purchase combination sets in which the soap dish is just one of the accessories, for example, shower holders with built-in cells, a stand with cups and a compartment for soap.

Devices for liquid soap

This detergent is very convenient:

there are no remnants;
the surface of the sink or bathtub does not get dirty;
consumption is more economical.

A soap dish with a liquid soap dispenser looks like a plastic or glass bottle. The material can be transparent, darkened or colored to suit the interior style.

The container is placed on the sink, but can easily be moved to another part of the bathroom. Along with this option, there are modifications with wall method fastenings They are stationary and more suitable for spacious rooms.

Liquid soap dispensers vary in activation method. In some models, the piston is activated by pressing the hand or elbow, while in others it is enough to bring your hand to the hole. The sensor is triggered and a portion of detergent is squeezed out.

Mounting features

In the photo of soap dishes for the bathroom you can see a variety of ways to attach the structure:

Desktop. Solid soap can be placed in a rectangular, round or oval tray fixed on the sink. You can also put them on a special shelf. Models with a lid to transport or protect the soap from external influences are common, as well as products with an insert or bulge to prevent deterioration.
Wall-mounted and removable design.
Magnetic mount. A holder with a magnet is mounted on the wall, and a special metal element is inserted into the soap bar itself. The soap is attached to the holder, creating a floating effect and drying quickly.
Lightweight structures with vacuum suction cups, attached to a wall or mirror.

Material for production

The most inexpensive material is plastic. This soap dish will be light and easy to clean. It does not differ in durability, but due to the low cost, no one will require this parameter. It will be more durable metal structure made of stainless steel, as well as bronze or brass. In the latter cases, chrome plating can be additionally performed.

Glass products made from tempered material will be strong and durable. The advantage is their hygiene and aesthetic appeal. Replacing glass with acrylic will give the soap dish greater strength.

Specific types of accessories

An interesting solution for furnishing the interior could be a soap dish grater for the bathroom. It is a container into which a bar of soap is inserted. At the bottom there is a grater with a spring. When you press the lever, the grater cuts off chips that fall onto your hands. The main advantage of this model is the original appearance and dryness of the bar itself.

But there are also disadvantages:

poor dissolution of chips;
it falls out of your hands, which reduces the efficiency of the device.

The lattice design also captivates with its simplicity. It does not have a solid bottom. The soap dish is mounted on the wall above the washbasin or placed on its surface. Water from the soap flows through the grate, and therefore the bar dries quickly and does not become soggy.

You can even make a soap dish with your own hands, but in any hardware or construction store you can find wide choose these products. You can pick up suitable option not only in terms of functionality, but also in accordance with the style of the bathroom.