Bathroom design with stall. Combined bathroom: use space wisely. Bathroom design with shower: photos of rooms in different styles

The modern rhythm of life involves the use of functional and small-sized things in interior design.

So recently there has been a fashion for shower cabins, which are installed in apartments instead of standard bathrooms.

This solution has many advantages, but first of all it saves space. However, due to the fact that the cabins intended for water procedures have a bright and stylish design, many people get lost because they don’t know how to properly design shower room interiors.

It is worth noting that many are afraid to install this modern device in the bathroom, because they think that in this case they will not be able to bathe small children or wash clothes by hand, but there are shower models where all this is provided.

And besides this, some cabins have a number of functions, thanks to which you can arrange a spa at home every day.

By the way, in foreign countries, many people do not use ordinary baths at all, do not soak in the foam for hours, but only take a shower twice a day.

That's all because utility resources and services there are expensive, and it has long been known that modern cabins help save water.

Large bath with shower

Despite the fact that the shower cabin takes up little space, it can usually be seen in private houses or apartments, where a fairly large area is allocated for the bath and toilet.

In this case, the owners have a lot of options and there are no special difficulties.

Huge booths, equipped with everything you need to not only wash yourself, but also relax, are often installed right in the middle of the bathroom.

Cylindrical showers with an unusual design are usually located in the center.

Lovers of the classics usually leave the bathroom and place a cabin in the other corner, and at the same time use both one and another piece of plumbing. Rectangular booths are usually placed against the wall.

Large bathtubs are also often equipped with cubicles without trays.

Small bathroom with shower

Owners of Khrushchev apartments always suffer because the bathroom space barely allows room to turn around.

And then the interior is created taking into account as many free meters as possible and visually expanding the space.

Shower cabins have always been popular because these useful “structures” save space in the bathroom and the amount of water spent, because in order to draw a bath, much more water is needed. In addition, you can take a shower in just a few minutes, but getting out of the bath in such a short time is unlikely to be possible.

Modern varieties, pros and cons.

We can talk endlessly about modern shower cabins, because in stores they are presented in various price categories, shapes, sizes, colors, styles, etc. Showers are very often used in small rooms where there is simply no space for a bath.

Today, shower cabins can not only be of different sizes, but also with and without a tray. Showers with a tray are difficult for those who have difficulty climbing (retired people, disabled people). In this case, you can choose a booth with a drain in the floor. This option is suitable for absolutely everyone, and in addition, the likelihood of injury is eliminated, because the coating is selected so that the surface is not slippery.

But pallets, on the contrary, promote sliding and do not eliminate the risk of falling.

Remember, all modern shower cabins are of good quality and among all the variety there will definitely be one for your room. suitable option.

Choosing a bathroom design with a shower.

When talking about the design of a bathroom with a shower, you need to pay attention to which particular cabin will suit you best. If you prefer modern, then excellent option There will be glass shower cabins, giving an atmosphere of comfort and modernity.

A special feature that is worth paying attention to is the price category. Glass shower cabins naturally cost more than the usual plastic ones, but they also look more aesthetically pleasing. You can diversify your bathroom design by installing a shower cabin of various shapes.

For example, corner showers will save space and fit perfectly, because the corners in all rooms are the same, even in the smallest bathroom and just a huge room.

Rectangular shower cabins can be called classic, as they are suitable for any room, but not too small in size. Such showers are installed along any wall, depending on its size.

Ring or round shower enclosures are the most interesting option, especially if they are made of glass. Yes, a cabin of this shape can be installed anywhere if the bathroom has sufficient space. Thanks to such an interesting shape, ring cabins create the impression of a waterfall when taking a shower, which is why they most often have interesting color schemes.

Five-wall shower cabins are also an interesting variety and are quite spacious, so this option can most often be seen in large rooms, where there is room not only for such a cabin, but also for free movement around the room to other important interior items. On our website you can see photo designs using various booths.

About design features using shower cabins.

The design of a room with a shower cabin has some peculiarities, since today the shower cabin plays the role of not only a “necessary” component, but also important element decor. In this regard, considerable attention should be paid to the choice, because it depends on how harmonious the design of the entire room will look.

The size of the rooms also deserves special attention, because you need to select a shower stall based on this starting point. It will not be possible to install a large shower in a small room, so you will have to look for the most best option to size. This does not mean that the cabin cannot be beautiful and interesting. Even small showers have different shapes and are made from various materials.

Another point that you need to pay attention to is the material from which the cabin is made. It can be glass and plastic, and even specially processed metal. What exactly suits you is a purely personal matter and the result depends only on what kind of atmosphere you want to achieve.

A shower stall in a bathroom is a beautiful decorative element, but it is also practical and convenient. Thanks to the cabin, you can maximally refine the room reserved for the bathroom and install in it not only a shower stall, a sink and a shelf for accessories, but also take care of household appliances, etc.

If we are talking about, then a shower will be very useful, because in this case there is not much space to install. And if you choose between a sit-down bathtub and a shower stall, many choose the second option, because it looks more aesthetically pleasing and is not inferior in comfort.

Bathroom design with shower photo.

How to decorate a bathroom with a shower installed in it? This question often arises both among owners of private houses and among residents of standard city apartments. But in your own home, bathrooms are usually spacious, and therefore arranging all the necessary accessories in them is much easier than in a cramped shared bathroom, as well as coming up with a design and finishing. Unfortunately, on the Internet you can most often find sketches and designs for premises, the vast area of ​​which remains a pipe dream for most apartment owners.

A small one with a shower cabin, the design for which is much more difficult to come up with, is almost not discussed. But various engineering communications also pass through this room, requiring a certain camouflage, which also complicates the design process.

It is about bathrooms with a shower stall, organized in small areas, about the possible difficulties of their design, taking into account certain nuances, that will be discussed in this publication.

In order for the finished bathroom, fully equipped with all the necessary accessories and finished, to look as originally intended by the owners, preparatory measures must be carried out that will streamline all further stages of work.

Drafting

First of all, a project is drawn up for the bathroom, in which the bath will be replaced with a shower. Usually this process aims to make the room more spacious or combine the bathroom with the toilet, so that, if possible, even expand the kitchen or hallway, depending on the layout of the apartment.

The main task of design is to be able to fit everything you need into a limited area

When developing a preliminary project, you need to remember that it is quite possible that adjustments will have to be made to it in the future after all communication pipes are opened. Masking boxes may be added to the sketch, since, depending on the project, there may be a need to relocate and extend water and sewer pipes.

Preparing the premises

Having thought through and completed on paper an approximate “layout” of the location of all items, you can move on to the next stage of work. It can be carried out in different ways:

• Removing all old bathroom accessories.
• Dismantling the partition between the bathroom and toilet, if it is decided to combine them into one room. This process should be carried out only after agreement with regulatory authorities.

Next, after dismantling all the elements, you need to get rid of the debris and thoroughly clean the walls and floor of dust. If the walls are tiled or finished with other decorative materials, they also need to be removed immediately.

If it is decided not to move the toilet, but to leave it on same place, then it is recommended to dismantle it last. If you can live without a bathroom for some time, then it will be much more difficult to do without a toilet.

Planning and installation of utilities

When the room is free of everything superfluous and unnecessary, it becomes possible to freely inspect the condition of the old pipes and, based on the bathroom design, think about how best to lay out the pipes by making the appropriate drawing.

If the repair is carried out only in the bathroom, and the sewer riser remains in the toilet, then it is recommended to hide both the water supply and drainage pipes in the walls. To do this, grooves are cut into which communications are installed - this will also help save some of the space.

In addition, it is recommended to install at least one socket in the bathroom, since very often this element is not enough to turn on a hairdryer. It may also be needed for a washing machine if it is planned to be installed in this room. Electrical cable You also need to hide it in the wall, having previously enclosed it in a corrugated tube, and purchase a special socket itself, with increased moisture protection.

After all the pipes and cables have been installed, the grooves are sealed with cement-sand or gypsum plaster mortar.

If the bathroom is combined, then all water supply and sewerage communications are usually combined and compactly mounted near the central sewer riser. It will still not be possible to move it, so the entire communication node can be disguised at once with a plasterboard box.

Particular attention is paid to the method of connecting the shower stall itself to the sewer riser. Some pallets have a very low drain pipe, so to connect it to the waste pipe you will have to either bury it in the floor or raise the booth itself to the required height. The pallet is raised using special adjustable legs, or a brick pedestal is laid out on which the shower stall is installed.

If the bathroom is combined and a shower cabin is installed instead of a bathtub, then some prefer not to install a box, which can spoil the interior design, but to install a masking wall made of plasterboard with an elegant shutter door. This option is especially suitable when, when combining a bathroom and toilet, the central sewer pipe ends up in the middle of the rear wall of the room.

It is necessary to leave an inspection window so that utility workers have free access to pipes, valves and meters. Well, an elegant door will cover the entire interweaving of pipes, so the door should be selected last, to match all the existing finishing.

It is also necessary to take into account that the inspection window must open freely, which means it cannot be blocked by any bathroom accessory.

In order to create such a wall or box, you will need to purchase a special galvanized metal profile and moisture-resistant drywall.

It is recommended that before starting installation of the frame, you need to think carefully, and best of all, even draw the location of each of its elements so that the structure is strong, and the window for access to the pipes is of sufficient size and located in a convenient location.

Waterproofing bathroom surfaces

Even before installing the masking box, after sealing the grooves and removing debris from the room, the floor must be covered with waterproofing. This must be done especially carefully around all pipes of any purpose passing through the ceilings (feed-through sleeves).

When waterproofing, pay special attention to corners and pipe passages

It is very important to waterproof the joints of walls and floors well, covering the walls with the composition to a height of no less than 120÷150 mm, and in places where plumbing fixtures are installed, even above the level of connection points (plumbing “sockets”). In these places, a special sealing tape must be glued, and only after these strips have dried, it is necessary to cover the entire surface of the floor with a waterproofing compound.

The future bathroom is completely waterproofed

Waterproofing will save apartment owners from unnecessary troubles in the event of an emergency, for which, unfortunately, it is impossible to fully insure. Water spilled on the floor surface will not flow to neighbors living on the lower floors. To prevent water from leaving the bathroom, the door must be equipped with a threshold, which also needs to be waterproofed.

Waterproofing the bathroom floor – the most important stage renovation!

There are several types of materials used for these purposes. A special publication on our portal will help you understand their diversity, choose the most optimal one and become familiar with the main technological methods of implementation.

How to choose a shower stall

Having prepared the room for the installation of all the necessary accessories, you can start choosing the purchase of a shower stall. In order not to be mistaken with the dimensions, you must first take accurate measurements of the area where the cabin is planned to be installed, and accurately determine the area that can be allocated for it.

Moreover, if you plan to purchase a booth, even if it has an almost triangular shape in plan with a small semicircular protrusion, then you should still take a square as a basis. The model you like in the store should be measured there from all sides, so that at home you can transfer these dimensions to the place for installing the cabin.

Prices for River shower enclosure

River shower corner

Currently, the assortment of specialty stores offers a variety of shower stalls - from the simplest to those equipped with numerous additional options. Naturally, their prices also vary widely. In addition, they can be different types, shapes made from various materials.

Shower stalls are mainly divided into two types based on their basic design - open and closed. What they are should be of interest first of all.

Open showers

Open showers are those that are limited by side walls but do not have a ceiling.

There can be two or three walls in the booths of open models; they can be installed in the front part of the structure and against the walls. In addition, there are options that have only front walls, which are attached to a frame mounted on the wall.

Such cabin models are considered economy-class products, since they are generally equipped with only a basic set of functions. They are often also called “shower enclosures”. Cabins that do not have back walls require enhanced sealing at the junction of the tray with the wall, the same as when installing a regular bathtub.

The absence of some additional functions is also explained by the fact that they will be useless in a structure of this type, since it does not have a ceiling, and, for example, “aromatherapy” or “sauna” will be effective only in an enclosed space.

Open booths are produced that can be installed without a pallet, but such models should still not be installed in high-rise apartments, since even if high-quality waterproofing is done, there is a possibility of flooding in the lower floor apartments.

In addition, the floor will have to be raised with a screed by at least 70 ÷ 80 mm in order to lay the waste pipe in this layer and mount the drain. Such a screed, even without taking into account the still necessary finishing of the floor, will significantly increase the weight of the floor structure, which can be extremely dangerous, especially for old houses.

It is not advisable to purchase a booth with a tray that has low sides, as this can also lead to flooding of the lower floors.

The only way to correct the situation (except for the screed) is to install the pallet in a well-waterproofed podium, which is usually made of brick. It is already possible to hide the drain pipe in it and lead it to the sewer, observing the obligatory slope of 2 - 3 degrees.

It is better to use such options for bathrooms of private houses, when the water from the pan is immediately drained into the sewer pipe.

Closed cabins

Closed type showers are otherwise called boxes. They differ from shower enclosures in that they have a tray, walls on all sides and a roof. Such cubicle cabins can be equipped with only the main function - a shower, or be multifunctional.

They are given a variety of shapes - in plan they can be a rectangle, circle, semicircle, triangle, etc. Their dimensions along the perimeter or diameter depend on the parameters of the pallets, which, in turn, can also differ in height and material of manufacture.

Bath with shower

Another option that will take up not much more space in the room than a regular bathtub. This is a whole complex that allows you to lie in hot water and relax or invigorate with a shower.

“Symbiosis” of bath and shower

This compact accessory is produced in different variations, and can be equipped only with a shower or have many other functions, including original lighting and even the ability to listen to music.

Sometimes such a cabin can have a rectangular shape, like a regular bath. There are also corner options, but they will require more space than a standard accessory.

Homemade shower cabins

Such a shower cabin can be built by the apartment owner himself, but it would still be better to purchase a ready-made shower tray. Of course, you can fold it yourself, but you shouldn’t load the ceiling - it’s enough to make a podium around the perimeter from brick.

Two walls or one, as planned by the designer, can be made of brick and covered with tiles or built from glass blocks.

The size of a homemade shower stall will depend on which tray is suitable for a particular room.

On sale you can find glass blocks of different colors and textured patterns, so you can choose them to suit every taste. These elements are also quite easy to install - the main thing is to constantly monitor the verticality of the masonry.

All that’s left to do is build a partition

Installing walls in a bathroom is almost the same as erecting partitions from different materials, including glass blocks. How - read in a special publication of the portal.

Shower trays

As mentioned above, the tray determines the shape of the shower stall. It can be square, rectangular, triangular, oval, or have an asymmetrical shape. Another defining parameter of this element in the cabin design is depth. Pallets can be deep - up to 450 mm, shallow - from 100 to 180 mm, and flat, only 30 mm deep.

Typically, pallets are equipped with an anti-slip textured coating. They are selected according to color, which should be in perfect harmony with all the accessories of the cabin or with the color scheme of the interior design of the walls, floor and ceiling.

Pallets are made from different materials - it can be cast iron, steel or acrylic.

• Cast iron enameled pallets are highly reliable and can be installed on a steel frame or a brick podium. They are perfect for homemade shower stalls.

• Steel pallets are also coated with enamel, but they are less durable because they have thin walls. When installing them on a frame or an empty podium inside while taking a shower, the sound of falling water will be very loud. Therefore, in such cases it is recommended to coat the back side of the pallet polyurethane foam, which will create a noise-absorbing layer. Steel pallets are less durable than cast iron, but if handled carefully they will last at least 10–12 years.

Steel pallets are inexpensive and quite practical with careful care

• Acrylic trays have recently become the most popular, as this material is highly hygienic, pleasant and quite warm to the touch. The acrylic tray is lightweight and quite durable if installed properly. If scratches appear on it, they can be easily rubbed off with fine-grained sandpaper.

The shallow tray is mounted in a special frame. If this option is chosen for a homemade shower stall, then a podium must be installed for it, exactly according to the shape of the bottom.

Some trays can also be used as a shallow bathtub. In such varieties it will be necessary to install a “drain-overflow” system.

• You can also build a homemade pallet if it is small around the perimeter and in height, that is, it will not overload the ceiling. For cladding it is recommended to use mosaic tiles, as it will create a non-slip surface.

When embedding a sewer pipe into a homemade pan, you must remember that it must be located at a slope of at least 2 ÷ 3 degrees.

Shower walls and doors

These shower enclosure guards are made from impact-resistant glass or acrylic. Acrylic walls and doors can have varying degrees of transparency and vary in color, but glass is easier to clean, since water does not linger on it and quickly drains without leaving marks. In addition, it does not become cloudy over time, unlike clear acrylic panels.

Doors in the shower can be hinged or sliding, consisting of two or four leaves. Sliding type doors have a higher degree of tightness in the closed position. The doors move using rollers and do not require additional space to open them.

Prices for popular shower cabins

When choosing a stall with a hinged door design, you will need to think in advance about installing other accessories in the bathroom, since they should not interfere with the doors, otherwise they can be accidentally damaged.

Additional functions of shower cabins

A few words need to be said about the additional functions of shower cabins, since some of them are also reflected in the interior design.

• Backlight. The finished shower cabin can be equipped with lighting, which is carried out using special waterproof lighting fixtures. This feature allows you to shower without turning on the main lighting in the bathroom. In addition, specially designed lighting has a therapeutic effect on the human condition (in medicine this concept is called chromotherapy).

In this case, the lighting can come not only from the walls and ceiling of the cabin, but also the streams of water coming out of the shower head are colored. Colors can be changed using the remote control, depending on your mood and which body system should be affected.

• Aromatherapy. This function allows you to fill the cabin with aromas with healing effects. To achieve this effect, steam and water are passed through a chamber containing an aromatic balm. The aromatherapy function can only be installed in cabins closed type, otherwise the desired effect will not be achieved.
• Tropical shower. This function simulates pouring rain, and this effect is achieved using a nozzle specially installed in the ceiling of the cabin. “Tropical Shower” relaxes the muscular and nervous systems well, so it is recommended to take it before bed.

The “tropical shower” nozzle is usually mounted in the roof of the shower stall

• Cold and hot shower. This function has the opposite direction: if a summer shower relaxes, then a contrasting one will invigorate and increase efficiency. During the procedures, cold and hot water are automatically supplied alternately in a predetermined temperature range.
• Hydromassage. Hydromassage devices can be horizontal and vertical. A horizontal hydromassage can be installed in a deep tray, which is essentially a whirlpool bath.

Vertical hydromassage is the one for which nozzles supplying air and water flows are installed on the side walls of the cabin. The quality and variety of available massage functions depends on the number and location of nozzles. Hydromassage can improve well-being, normalize blood circulation and have a positive effect on intestinal function.

• Turkish bath. If this function is provided in the booth, then inside it you can create a special microclimate with 100% humidity at a temperature of 40÷60 degrees. This option is achieved using a steam generator that generates and dissipates steam inside the cabin.

It should be noted that to achieve the effect of the hydromassage function and create a microclimate Turkish bath, the pressure in the water pipes must be no less than 2÷3 Bar.

In addition to these functions, shower cabins can also be equipped with voice control, music, detergent dispensers and much more.

By purchasing a shower cabin with abundance various functions, you need to immediately count on high energy consumption. Connecting the cabin to electricity must be done with a separate cable, which must be grounded, so you should invite a specialist for installation and connection.

Is it possible to install a shower stall yourself?

Practice shows that this is a rather difficult, but still quite feasible task. Advice on this is given in an article on our portal specifically dedicated to this issue.

Video: variety of shower cabin models

Bathroom finishing

The surfaces of a bathroom with a shower stall installed in it are most often tiled with ceramic tiles, since this material is ideal for this room. However, there are other options.

Wall decoration with plastic panels

The range of PVC panels is very diverse

For finishing the walls in the bathroom, they are perfect large assortment can be found in hardware stores. An important condition for their installation is the maximum possible evenness of the wall surfaces. This is necessary especially if the bathroom space is very small and installation will have to be done using glue.

The advantage of choosing plastic panels is that they are more affordable and any novice craftsman can install them, and this is especially important for saving money, of which quite a lot is spent during repairs.

An important condition for the quality of installation of this material is the tight connection of the panels to each other and careful sealing of all joints.

The most “budget” option for wall decoration in the bathroom is PVC panels

When you buy high-quality panels and follow the technology for laying them, you will get a beautiful, durable, hygienic coating that will last for many years. How to do it yourself - in a special publication on our portal.

“Classic” wall decoration – ceramic tiles

Cladding with ceramic tiles is a more labor-intensive job, since you need to master the technology of its laying. Therefore, in order to get an impeccable result, you often have to invite a master veneerer, and his work will not be cheap. It is especially important to carry out the process according to all the rules if you intend to decorate the walls with tiles with an ornamental image or fit panels into the main masonry.

If you still decide to try your hand at this work, then the walls will need to be leveled to perfection. This task can be dealt with by using sheets of plasterboard, which are mounted on the wall using a construction adhesive mixture. Such leveling is possible if the walls do not have excessively large differences. For surfaces in the bathroom, only moisture-resistant plasterboard with green color front surface.

Use drywall to level the walls!

Ideally smooth gypsum boards will level the surface and become a good basis for further finishing, including ceramic tile cladding. In conditions of limited bathroom space, it is more advantageous to apply directly to the surface. How this is done is in a separate article on the portal.

Floor finishing

The floor in the bathroom can be tiled with ceramic tiles, covered with a moisture-resistant laminate, or decorated with a self-leveling epoxy coating.

Ceramic tiles on the floor must also be laid skillfully, otherwise level differences may form. This will not look aesthetically pleasing, and in addition, it can lead to injuries, since it is easy to trip on the protruding tiles or scratch your foot.

If the shower tray has low sides, then flooring made only from ceramic tiles.

Tiling the floor - how difficult is it?

The process cannot be called simple, but if you strictly follow all the technological recommendations, you can do it yourself. To decide on it, it is recommended to study the special publication of our portal.

• The floor can be decorated with laminate if a closed shower stall with high tray walls is installed. With this option, the risk of water overflowing and hitting the floor surface will be much lower.

Laminate has an advantage over ceramic tiles in that its surface is much warmer and less traumatic, which is very important when getting out of the shower.

The “disadvantage” of this coating is its shorter service life. But if you purchase material with a higher resistance class, lay it and use it carefully, and do not walk on such a floor in shoes with hard soles, then laminated coating can last quite a long time.

• A self-leveling epoxy or polymer floor is suitable for a bathroom that has a shower stall with any tray, since it performs two functions at once - both waterproofing and decorative coating. The disadvantage of this type of floor is that to install it you will have to invite a professional, whose work will be quite expensive. And the set of materials for such filling itself will cost a “good” amount.

A modern approach to finishing a bathroom - self-leveling epoxy flooring

A self-leveling polymer floor with patterns, fillers or even a three-dimensional design will look very advantageous in the bathroom. In addition, the problem of waterproofing is immediately completely solved. To learn more about the technology and evaluate your capabilities, read the special publication of the portal.

Bathroom ceiling

The ceiling in the bathroom is decorated using different materials - it can be plastic panels, suspended ceiling, slab, painted, decorated with polystyrene foam tiles, made of plasterboard suspended structure and others.

The most important element of a bathroom interior is a beautifully designed ceiling.

The ceiling in the bathroom - a special approach

Each type of ceiling finish has its own advantages and disadvantages, both during installation and during operation. To find out, read the special article on the portal.

Design options for bathrooms with shower

In order to imagine what different options for shower cabins might look like in the interior of small bathrooms standard apartments, it is proposed to consider several possible design solutions in more detail.

Option No. 1

In this case, the combined bathroom is arranged in a room whose area is usually reserved only for the bathroom.

The compact arrangement of all the necessary elements contributed to the fact that a fairly large area of ​​the room remained free. For this purpose, a simple compact shower cabin without additional functions with a medium-depth tray was chosen, so it does not weigh down the interior. Its matte-transparent walls, as well as a mirror that reflects the opposite wall, help expand the space.

For the walls and floor, two types of light-colored tiles were used, which harmonize perfectly with each other. A narrow ceramic border with an ornament that includes both colors used in the interior is used as a decorative decoration, which both unites and separates them.

Light colors, as well as floor tiles laid diagonally, visually expand the room.

To prevent the room from appearing narrow due to the height of the ceiling, white tiles are laid not to the entire height of the wall, but in the form of a wide insert, which is framed by a narrow border of ornamental tiles. The upper part of the walls is decorated with a stripe of the same color as Bottom part interior - it seems to make the ceiling lower, and the room does not seem too narrow. Combining color between floor planes and panels also expands the space.

The central sewer pipe has a shelf design that is not only functional, but also fits perfectly into the design.

We can say about this interior that the designer thought through every detail of its design - from the color scheme to the placement of all accessories. Moreover, a space has been prudently left where, if desired, the apartment owner can easily install a washing machine and secure a towel rack.

Option No. 2

In this case, free space in the bathroom appeared due to the combination of two rooms - the bathroom and the toilet. When demolishing the wall between these rooms, part of it was prudently preserved for converting it into a partition medium height separating the bath and toilet areas. The compactness of this element makes it almost invisible in the interior; moreover, its preservation made it possible to preserve the location of the heated towel rail, which was simply replaced with a smaller version.

The interior uses two shades of the same warm color, which makes the room lighter, and the white ceiling echoes the interior elements, which look like light spots against the background of a dark orange tone. The border separating the color zones is a kind of “highlight” that adds aesthetics to the design and emphasizes the panel area.

Such a color scheme, although thought out in warm sunny tones, still requires more intense lighting, since the dark orange tint of the panels and floor does not support it, but rather absorbs it. Therefore, only the white ceiling and accessories located on a dark background look like light spots.

For this bathroom, a compact, simple shower cabin without additional functions with transparent walls was chosen, which contributes to the effect of expanding the space, and the rounded shape of its doors softens the lines of the interior. Smooth lines and warm colors can put a person in the mood for relaxation, which is good for the evening hours, when water treatments are taken before bed, but does not at all contribute to the mood for increased performance.

It should be noted that such a design is not well thought out in terms of color scheme, since the room requires additional lighting. The arrangement of all interior elements is successful, quite compact and occupies a small area. The rest of the room can be used to install other traditional bathroom items and appliances.

Option #3

The interior in this case is made in cool colors. Although the room is quite bright and does not require additional lighting, the chosen gray and white finish looks rather dull and “official”. There is thoughtful neatness in the interior, thanks to the rational arrangement of all accessories, however, there seems to be a lack of home comfort. If a facing material of this shade is chosen and the room is already decorated in similar style, then a bright warm colored rug placed on the floor and a colored panel on the wall will help correct the situation. These details will add warmth, comfort and light to a dull, monochromatic interior.

The layout of the room is successful, but the design style is somewhat “cold”

The positive aspects of this design include the horizontal arrangement of rectangular tiles on the walls and diagonal ones on the floor provided by the designer. This solution visually expands the space and makes the room more voluminous.

In the option under consideration, a shower cabin has been chosen, which has a massive shape and a greater number of functions. It is the center of the interior and the first one, upon entering the room, attracts attention, and the remaining elements seem to support its presence, filling the space.

In general, the interior is decorated with professional precision and calculation. The only drawback is its monotony and coldness of color.

Option No. 4

This small bathroom is located in small apartment, the so-called “Khrushchev”. Having this small room, you have to think through the installation of each of the elements with special care, and the shower cabin with its compactness can be called the only rational solution.

Managed to fit literally “on the spot”

In this interior, despite its small area, the sewer line and pipes running next to it are perfectly camouflaged with the help of a built-in duct. Moreover, the box fits perfectly into the design, without standing out and, it would seem, not taking up space at all. The shower stall successfully found its place between the wall and the protruding part of the box. Although it does not look compact in a small room, it looks very aesthetically pleasing and neat. The semi-circular sliding doors of the cabin have frosted glass, and this additionally contributes to the visual expansion of the space, since they close the corner of the room in which the booth is installed, thereby blurring the boundary of the wall.

The room is decorated in light colors, and tiles the color of baked milk are used. This approach, together with the white color of all accessories, enhances the lighting of the room.

In the interior shown, the area is used as rationally as possible with a well-chosen color and arrangement of all the elements necessary for this room.

Option No. 5

Another room that seems to make it impossible to place in it everything necessary for hygiene procedures. However, the skillful designer did an excellent job here too, choosing compact accessories and successfully placing them in the space.

There was even space in the room for a pencil case, a washing machine and a mobile trolley bedside table, on which detergents and towels were conveniently placed.

Moreover, a shower cabin was chosen for this bathroom, which has a deep tray that can be used almost like a full-fledged bathtub. In addition, the cabin is equipped additional functions, as well as a seat, which makes water procedures as comfortable as possible.

The walls and floors were decorated using ceramic tiles of contrasting colors. Dark blue cladding material is used for the panels, and top part The walls are made white, which makes a small room that does not have natural light quite bright. A narrow border, separating two colors and having them in its ornament, softens the sharp transition from the dark lower area of ​​the wall to its upper, light part.

We can say about this interior that it contains everything necessary for receiving procedures. Moreover, despite the small space, quite a lot of space is left for free passage to any of the accessories.

In conclusion, I would like to note that in order for the interior created in the bathroom to be used for as long as possible, it is very important to carry out preliminary preparation of the room, as well as choose the right accessories for it. Having followed all the recommendations for arranging this room, the owners will receive a comfortable bathroom that will last for decades.

To conclude the publication, here is another interesting design option for a bathroom with the installation of a shower stall.

Video: bathroom interior with shower

Taking a shower in a beautifully designed and comfortable shower room, where the arrangement of shelves for storing bathroom accessories is well thought out, where there is a beautiful and convenient mixer that allows you to easily regulate the water temperature, and high-quality finishing materials, is very pleasant. This procedure brings no less pleasure than a bath with foamy water and sea salt. If the shower is also equipped with hydromassage, the effect increases many times over. And in order for the technical equipment and design of the room to be truly high-quality, its arrangement must begin to be thought out even before the start of repair work.

Unfortunately, it is rarely possible in standard apartments to accommodate both a bath and a shower; most often, only one of them remains. At the same time, many people prefer a bathtub, because it also allows you to take a shower - thanks to the horn mounted on the wall. But it should be said that this solution only allows for a rinsing procedure. No hydromassage systems and sufficient free space Unfortunately, no, moreover, often trickles of water tend to slip onto the floor through the gap between the wall and the curtain. All these are little things, but they happen and do not allow you to fully enjoy taking a shower in the bathroom. Therefore, today in the article we will look at how you can arrange a full-fledged interior of the shower area in the bathroom.

Shower room design photo

Is it worth making a shower room?

By giving up a bath and preferring a shower stall or just a shower room, it is often possible to free up additional free space. It, in turn, can be used under a washing machine or a sink with a mirror, thereby creating more free space in the dressing and undressing area. Which is good news, especially in small bathrooms.

Shower room design photo

It is worth saying that in both cases it will now be possible to take a shower fully, because the shower area will already be optimal in size and neither the constantly opening curtain, nor the wall, nor the narrow bathtub, etc. will interfere.

A shower without a bathtub in the bathrooms of typical apartments allows for the most ergonomic use of the space in this room. At the same time, without compromising comfort and pleasure, their type will simply change - to a place of relaxation in a bathtub with foam, unprecedented rest, relaxation and pleasure will be provided by a shower equipped with a hydromassage system, or with a “sauna” function.

Shower cabins bathroom design

Shower stall or shower room?

Many compatriots prefer to purchase ready-made cabins, because they allow you to get the desired result in your own bathroom in the shortest possible time, since installing a shower cabin does not require serious renovation work. It is enough to dismantle the old bathroom and install it in the free space.

Shower room design photo

Also, it should be noted that modern shower stalls can have different shapes: round, semicircular, square, rectangular, etc. Larger models can also have a high tray, which also serves as a bathtub. Also, such cabins can be equipped with additional functions, the most important being various hydromassage modes and, of course, the “sauna” mode. But they also have their disadvantages - the main one is their bulky appearance. The more options, the more powerful it looks, and the energy costs it produces are not small.

Equipping a shower room in a bathroom allows you to get a very stylish design, since the location of every detail is carefully thought out before work. The most modern finishing materials are used to furnish the walls, floors and ceilings. Unlike a cubicle, there is no bulky tray or frame; this shower looks more elegant and stylish. Connoisseurs of high aesthetics and quality design Of course they prefer shower rooms. They have another important advantage: they have a unique design.

Shower room design photo

The main disadvantage is that implementation requires quite serious repair work, often involving the installation of a hidden plumbing and drainage system.

Bathroom interior with shower room

How to create a comfortable design in a shower room?

If you still decide to get rid of the bathtub, and instead of a shower stall you prefer a full-fledged, stylish and beautiful shower room, then let's look at various options for implementing such a solution.

It should be said that there are two main ways to solve the problem. This is the creation of a zoning partition or the construction of a completely closed area, when a door is also installed next to the partition. Which option should I choose? - this issue is decided individually; the configuration and size of the room will affect the result.

Shower room photo

In small rooms, it is most appropriate to use one partition, and the door can be replaced with a curtain, if necessary. This will allow you to get rid of the swing door, which also requires extra bed. A good alternative is a sliding door like a wardrobe. This solution is convenient if the shower is wide - from wall to wall. For single small showers, modern and convenient solution will use a glass or plastic accordion door.

In more free bathrooms, you can make a more spacious shower with doors.

Ideal place for a ball shower there would be a niche that already has walls; it is enough just to carry out communications to the right place and install doors, or you can do without them altogether.

Shower room design photo

What are the types of partitions and doors?

A bathroom partition can be made from various materials; the most common technique involves using a frame and plasterboard, which is subsequently covered with tiles or mosaics - just like all other walls and floors.

Shower room interior photo

Another method, which has long been known and is being revived today, involves the use of modern glass blocks. Glass blocks in the bathroom interior will look very appropriate, because they have a translucent appearance, are not afraid of water and reflect and transmit light well. So the presence of such a partition in the bathroom will allow you to avoid installing additional lighting for the shower area and the bathroom design will turn out to be interesting.

Shower room interior photo

The same applies to the use of completely glass partitions. Perhaps, of all the options, this is the most modern solution, which in addition does not hide space at all. Moreover, such a solution in combination with quality tiles or mosaic, chrome faucet, hinges and door handles, looks quite stylish and expensive. The only drawback is that after a shower, the water dried on the glass leaves marks. Therefore, in order to ensure proper appearance and maintain the same transparency, you will have to periodically wipe the glass. This problem concerns only completely transparent glass, the problem is easily solved by using frosted glass.

Often in apartments and houses the bathroom is combined. This is justified from the point of view of saving space (one less wall), and from a functional point of view too. But developing a bathroom design is not easy: you need to correctly place the plumbing fixtures, and sometimes even household appliances (water heater and washing machine). More on all the intricacies of this difficult task below.

Ergonomics of the bathroom

To make using plumbing fixtures convenient, it must be placed at a certain height, maintaining minimum tolerances to walls and other objects:

When developing the design of a bathroom, these dimensions must be kept in mind, but they can and should be adjusted. They are calculated for the average height and average body size of a person. When deciding on the exact location of a particular piece of furniture, “try on” the distances for yourself. If you are comfortable, you can install at this distance.

How to arrange everything

In addition to plumbing fixtures, a modern bathroom also contains Appliances. For lack of any other place, a washing machine and sometimes a boiler are placed here. So, in addition to the toilet, sink and bathtub/shower, you have to look for space for two more large items.

Looking for a place for a typewriter

One option is to choose a machine and a sink so that the washing machine is hidden under the washbasin. The disadvantage of this solution is that the sink will be higher than usual, and you will have to look for a narrow machine. If there are tall people in the family, having plumbing fixtures located a little higher is not a big deal, and the space savings are significant. The photo below shows one of the options for this bathroom design. The sink used was rectangular - there are many of these today.

A machine under the sink is a way to save space in the bathroom

If it is impossible to lift the washbasin, the machine is placed where it “fits in”. To prevent the space above it from wandering around, you can make shelves on top. If there is a need to hang a boiler, above the machine is the right place for it.

Above the washing machine - a reasonable solution

If space is very limited, look at top-loading washing machines. They are smaller in size and can fit into a small space.

Bath or shower stall

The bathtub certainly has the advantage of being able to soak in warm water. But it takes up a lot of space and in some cases such convenience can be neglected by installing or making a shower stall.

If you don’t want to say goodbye to the bathroom, we will “fit in” it and all the necessary items. The most obvious way is to place the sink so that one edge is above the bathtub. But at the same time, you need to make sure that using the washbasin is convenient.

If you just use a small washbasin, this will cause significant inconvenience: splashes will fly in all directions, and there will be nowhere to put accessories. In such cases, they make a tabletop (as in the photo above), and cover it with mosaics or tiles. This design takes up less space, and the functionality is even higher.

Another option is to install a corner bath, thereby freeing up one corner for installing a washing machine or toilet.

Corner bath - more compact

Another option is to use the bathroom non-standard shape. For example, like the one in the photo. And there was a place for the car...

A non-standard shaped bathroom is also a solution

If you still can’t fit a bathtub into the bathroom, install a shower stall (). Moreover, it is not at all necessary to buy a ready-made one; you can make it yourself and install the doors.

A homemade shower stall fits well into the end of a long and narrow bathroom. You can simply fence off about a meter from the wall by installing doors. Moreover, the doors can be made of glass (tempered glass). They do not divide a small space and the bathroom design is more harmonious.

In square rooms, part of the area is blocked off by installing a dividing wall. With this decision, you need to remember that the minimum size of a shower stall is 90*90 cm. This is not enough - you can’t wave your hands too much in such a nook, so if possible, do at least a little more.

Where to put the bidet

Using the bathroom is much more convenient if it has a bidet. It is optimal if it can be placed next to the toilet (the distance between two earthenware products is at least 40 cm). If there is not enough space nearby, you can install it on the opposite wall. The main thing is that there is water supply and drainage there.

The best bidet location

The problem is that with all approaches, this plumbing item takes up about a meter of usable space. If the total area of ​​the bathroom is only 4-5 sq.m. that's a lot. In this case, you can install a hygienic shower. Warm/cold water is supplied to the toilet, a mixer and a flexible hose with a special nozzle are installed. This option is slightly inferior in functionality to a bidet, but is also very convenient.

Hygienic shower near the toilet - convenient and space-saving

Fashion trends in decoration

The same trends are observed in the design of bathroom walls - combining tiles different colors and shades. Just like with tiles, manufacturers produce tiles in collections whose design is designed so that they are combined with each other.

Bathroom design using tiles from one collection

The design styles of bathrooms have also changed - they are increasingly decorating the room with a modern style, in the spirit of minimalism or hi-tech. When creating such an interior, rectangular shaped plumbing fixtures and a minimum of colors are used. All these styles are characterized by neutral tones for the walls - white, gray, beige. And against this background there may already be several bright elements from a compatible range.

Minimalist style in bathroom design - no unnecessary details

However, modern plumbing itself can be decor. There are quite decorative forms with graceful outlines.

Bathroom design in photo

Mosaic on walls and floors is one of the most fashionable trends now

For romantic people - a pink bathroom with floral decor

A shower stall in a small bathroom is a way to “get” more space

Minimalism in everything...

And again the mosaic... The bathtub is successfully separated from the washbasin - there will be less splashes

Interesting tile layout for the bathroom - both light and not boring

Mosaic panels - decoration of any interior

Shower doors can also be made of colored glass to match or install dividing walls to create a more comfortable atmosphere

A corner toilet is still a rare phenomenon, but sometimes irreplaceable

Small bathroom design - art

Self-leveling floors with or without a pattern are another novelty in recent years

For those who prefer a modern style, square or rectangular plumbing fixtures are more suitable

Mosaic in combination with matching tiles - stylish and beautiful

There is natural stone on the walls, unusual furniture and glass sink - stylish interior

Pink matte tiles in the bathroom - another view

Lush greenery on a white background - a simple and effective tile layout (the opposite side is completely green)

Unusual design - brick wall

In Khrushchev-era or small apartments, the owners make a conscious decision to remove the wall between the bathroom and the bathroom in order to expand and reduce waste on finishing work. A popular option is the interior of a bathroom with a shower combined with a toilet; photos of design projects will help you create your own layout.

Zoning and layout of a combined bath and toilet

First of all, the smartest solution would be to install a cabin instead of a bulky bathtub. This will help you get an extra square meter on which you can place the desired item, washing machine, linen cabinets or various utensils that will be needed in the household. On the contrary, you can leave this area unused for a spacious stay.

If it is difficult for you to part with the bathtub, then the problem can be solved by purchasing a shower that has a deep tray. Thanks to it, you can provide comfortable conditions for taking a shower.

An interesting option is. This design does not take up much space. Therefore, it is ideal for a combined bathroom.

If you have a rectangular room, the entrance to which will be on the wide side of the wall, try to place the shower stall on one side of the door and the toilet on the other. Then it will be easier for you to arrange the rest of the plumbing and furniture in a place convenient for you.

A sink with beautiful and unusual drawers can be placed in the center of the room. It can be complemented by a mirror with an unusual ornament, or with any complex lines.
In a room that has a narrower, rectangular shape, and the entrance to it is from a narrow wall, it is best to place furniture in one row, installing it along the wall.

It is important to note that when choosing plumbing fixtures, pay attention to their sizes. For example, a neat small toilet or shower looks much better and more aesthetically pleasing.

To visually separate the bath space from the toilet area, you can use different techniques:

• Contrasting tiles are laid out in different zones. For one area you can choose a lighter material, for another - darker.
• An image on the wall can visually separate a room. This could be a drawing on a tile, panel or...
• You can place an object between the shower and toilet. This could be a washbasin with a cabinet, a washing machine.

The most convenient layout– square. It can easily place all the necessary furniture and plumbing along the walls, thereby making the task easier with correct arrangement. In addition, if desired, you can leave a decorative wall to separate the toilet from the main area in an original way. If you do not want to use complex decorations, visually separate the toilet from common room, then a good way to install it opposite the shower stall, the main thing is to choose the right shape of the plumbing.

Bathroom interior with shower

The interior of the room plays a big role. Each apartment owner chooses the shades and colors that he likes best, which suit the entire interior.

It is important to note that it is better to make the bathroom light, as dark colors can visually make the room smaller. This does not mean that the tile color should only be white or light shades.

We also draw your attention to the fact that when visually expanding the space, it is good to use such shades of tiles as:

• green,
• blue,
• pink,
• light brown,
• beige,
• lilac,
• coffee.

You can also expand the area of ​​the room using mirrors or additional lighting.

Don't be afraid to experiment. Now on sale a large number of original ideas, for example, mosaics based on a selected photo or drawing, various decorative stones, do not limit yourself only to choosing boring, monochromatic tiles.

Every person dreams of a spacious, roomy bathroom, so that there is nothing superfluous there, and there is a separate toilet. But many people cannot afford to purchase large apartments, and they have to huddle in a small apartment with a small bathroom combined with a toilet.

The interior of the bathroom shown in the photo with a shower combined with a toilet allows you to implement the idea of ​​rearrangement, which will help make the room comfortable.

It is important to know how to correctly and competently arrange all the necessary plumbing fixtures for further comfortable spending time in a small room with a toilet and shower. Even a small room can be easily made cozy and functional.

Planned bathroom renovations often turn into renovations. In an effort to create coziness, expand the usable area, and modernize the decor, many abandon the standard large-sized bathroom model in favor of a more ergonomic design. The issue of designing a bathroom with a shower cabin for small spaces is especially relevant.

Choose a beautiful one functional model- half the battle. Fitting it harmoniously into the existing space and creating an organic bathroom design is not an easy task. A shower cabin can play a key role in the interior or become an easy addition to any design.

A shower is a must for any bathroom. It's hard to imagine the opposite. Increasingly, apartment owners prefer full-fledged shower cabins instead of standard bathtubs.

It is not without reason that there is a trend towards the popularity of these technical means, because they have a number of significant advantages:

• Efficiency of water procedures. If there is a classic bowl, the shower unit is present and is used much more often in the bathroom itself. Here the dependence is directly proportional to the time spent. Sometimes the bustle of everyday life significantly limits the duration of water procedures. Taking a shower is much faster.
• Saving water resources. Using a shower significantly reduces water costs. The cabin does not have to be filled with a large volume of water. The pressure of the flowing resource is adjusted as needed. The washing process does not take long.
• Increase usable space. The shower cabin is simply a godsend for a small bathroom. The use of compact models allows you to significantly save space.
• Safe to use. The use of anti-slip coatings on the shower tray allows us to talk about minimizing the risk of injury when taking water procedures.
• Functionality. Latest developments allow you to choose among the variety of models offered. Equipping the cabins with all sorts of additional functions will satisfy the needs of the most demanding buyer.
• Aesthetics. Manufacturers care about the appearance of shower cabins. Ergonomics and original design allow you to create a unique environment and embody the design.

Shower cabin, with a fairly significant set positive qualities, requires careful care. Embossed surfaces and joints need regular cleaning, otherwise the design aesthetics will quickly lose the required attractiveness.

Types of shower cabins

When preparing to renovate a bathroom with a shower stall, you first need to find a model that meets the requirements. The choice is great and requires a serious approach and careful study of useful characteristics.

Any shower stall is a structure that limits the washing area. Conventionally, models are divided into open and closed.

Open showers

This model is often called a shower corner. It is equipped with side walls, but does not have its own base or rear panels. The model is mounted directly to the walls and ceiling of the bathroom, which become its continuation. An open shower cabin is economical, usually has only the most necessary functionality, without frills.

Installing such a model requires preparatory measures. Mandatory conditions include waterproofing and leveling the main surfaces of the bathroom: floor, walls, ceiling.

The need for additional actions is associated with creating a tight seal for the future shower enclosure. The work is carried out with high precision. Even an insignificant gap can regularly upset the owner with leakage and accumulation of water outside the shower space. In the absence of high-quality waterproofing, this is fraught with problems with neighbors.

The design is simple, so the range of functions is extremely limited. Installation of an open shower cabin is carried out exclusively in a corner of the room, or in a niche. It is possible to install this model of cabin directly on the bathroom floor. Saving space and money is guaranteed.

An open shower stall, equipped with transparent internal doors, can significantly free up space and create the effect of lightness, weightlessness, and elegance. Efficiency of use and visual space are important for limited spaces.

The absence of a pallet requires high-quality waterproofing and drainage equipment. These actions “eat up” several centimeters of the height of the room. Particular attention should be paid to the choice of tiles for the floor. Anti-slip options are most preferable.

It is better to make the drain ladder from high-quality stainless steel so it will last longer.

Enclosed showers

A closed cabin or shower box is a separate structure that has its own walls, floor, and ceiling. Functionality and tightness are guaranteed by the features of the model. Shower boxes are made from a variety of materials, differ in size, shape, and the presence of additional features.

Cabin trays vary in depth (3-45 cm) and are made from:

• Acrylic;
• Cast iron;
• Become;
• Ceramics.

Pallets made of acrylic are the most popular. They are light, durable, retain heat, and do not lose their color. The presence of a metal frame ensures rigidity. Scratches and other minor operating defects are simply corrected with a special paste.

Cast iron is heavy, but retains heat well. Steel creates a lot of noise from the flow of flowing water. Both options are coated with enamel, which is overly susceptible to mechanical damage: chips, scratches. Ceramics are hygienic and require minimal effort to maintain. A cold surface and fragility significantly impairs the properties.

Walls and doors are made of impact-resistant glass and acrylic. They open in a sliding, hinged way. Roller rail structures are compact and have high tightness. Swing doors require additional space.

Additional functions of enclosed shower cabins

Additional functionality allows you to get a number of significant advantages:

• Hydromassage;
• Aromatherapy;
• Bath;
• Tropical rain;
• Cold and hot shower;
• Chromotherapy;
• Ventilation;
• Voice control, telephone, radio;
• Lighting, mirrors, shelves, dispensers, seats, handrails, etc.

The hydromassage function is the most popular. Elastic jets of water supplied by nozzles promote relaxation, improve blood circulation, metabolism, and help in the fight against overweight, cellulite. Caution should be exercised by hypertensive patients, cancer patients, and during periods of exacerbation of chronic pathologies.

Hydromassage is divided into vertical and horizontal. Water is supplied by nozzles located in a special way. It is possible to regulate the pressure of the jets and air. The number of nozzles and the ability to regulate will tell about the quality of hydromassage procedures. The possibility of turning, adjusting pressure, direction, and the availability of high-quality filters must be specified when purchasing.

The function of the bath is obtained by creating high air humidity at a relatively low water temperature. The steam generator distributes the smallest particles with a fan, creating a bath microclimate. The function only works at a certain pressure in the pipes.

Aromatherapy distributes a pleasant scent around the perimeter of the cabin. Tropical rain disperses tiny droplets of water, helping to relieve stress. A contrast shower alternates hot and cold jets, providing stress relief and strengthening the body. Chromotherapy tints water with LED light. Color perception helps improve the health of the body.

A variety of other useful functions can be selected according to personal needs. Many properties of a closed shower cabin are simply not used by the owners, so it is better to choose the necessary set in advance.

The variety of possibilities creates the need to supply electricity. It is better to allocate a separate line with mandatory grounding.

Small bathroom with shower

The available space influences which bathroom interior design with shower you prefer. Perhaps limited space will indicate a complete abandonment of the standard bathroom, or replacement with a more compact model.

For modest-sized rooms, it is preferable to choose shower enclosures. It will save a lot of space and can accommodate a classic bathtub and toilet. An open shower stall is installed in a corner space that is usually little used. If the bathroom is combined, perhaps the layout of the space will be better.

Availability of a niche suitable sizes allows you to install a closed compact model. The ability to establish the necessary communications will be a determining factor. You should pay attention to models with sliding doors.

Transparent booth options or those painted in light colors are preferred. This will make the space look less busy light shades will add volume. It is better to choose a pallet of medium depth. It is able to cope with its main function and will not burden the interior.

Bathroom finishing small size It is better to do it with light materials. The combination of a darker floor, the lower end of the walls and very light central and upper borders, separated by a low-contrast border, is a classic design model for a small space.

Having a mirror is a must. Reflective surfaces can expand space. Even the ceiling can be mirrored, but it is better to give preference to film because it is not dangerous.

If it’s difficult to give up a classic bathroom, but you want to have a shower, you can choose something in between: a bathroom equipped with shower panels. Externally it resembles a regular cabin. You can also equip the bathroom with sealed screens on rails.

Spacious bathroom with shower

Having enormous space allows you to make informed choices. Focus completely on the design of the shower cabin, bathroom interior.

Here you definitely won’t have to sacrifice the necessary elements of a comfortable bathroom for the sake of placing a multifunctional cubicle. However, often in a large bathroom the shower is also placed in the corner. This location is convenient and provides the best ergonomics. Rational use of space always provides a lot of additional opportunities.

The ability to purchase an autonomous monoblock is a significant advantage of a spacious bathroom. A separate shower stall has a number of significant advantages. A wide range of additional functions can diversify water procedures and additionally take care of beauty and health.

When choosing a spacious shower stall, you need to think not only about rational use, but also about proper placement in the interior of the bathroom. The presence of unconstrained space allows you to place the block not only in the corner, but along the perimeter of the wall or even in the center.

The large area of ​​the bathroom allows you to freely arrange all the elements. Here it is better to resort to zonal division space. Delineate the place for water procedures, storage of accessories, bathroom, bathroom. Large spaces allow you to freely accommodate a couch or chair.

Design features of a bathroom with a shower

A successful bathroom interior with a shower cabin is easier to create for those with a significant amount of space. In any case, it is necessary to think through all possible options, perform measurements and calculations. Drawing up a project will greatly simplify the task.

It is also possible to rationally use a small space and at the same time harmoniously fit a shower stall into the interior. You should take a closer look at the existing options, design, clarify the dimensions, and installation possibilities.

Decide what items will be in the room, their configuration and location. After all, the shower stall will take up enough space in any case. A convenient approach to the sink, washing machine, cabinet, and toilet should be provided. The presence and location of the boiler and heated towel rail are also important.

Stand-alone models require more space and are more difficult to fit into the interior. You will have to think through the design in detail, compare the appearance of the candy bar with the expected picture of the room. When done poorly, such models look somewhat ridiculous against the general background. Like a spaceship in the middle of an open field.

Prefabricated models that assume the absence back wall booths - they are replaced by stationary ones, tiled, they fit into the interior much easier. If the booth is transparent, it looks organic with any design. It is more difficult for a colored frame to support the overall design theme of a bathroom with a shower. You will have to try to choose finishing materials to match or choose universal ones.

Finishing, repair, design

When choosing a bathroom style, you should decide on the main goal - calm relaxation or recharging with energy. The space can be made light, calm, classic or bright, dynamic. When choosing a style, it is better to be guided by modern trends, since the shower stall has a fresh flow and it is much more difficult to beat it. Minimalism, hi-tech, modernism go well with small spaces. In a large space you can embody loft, classic or even baroque.

It is better to hide communications in the walls, and if the bathroom is combined, put them in a common box. The box is made of plasterboard, leaving a window with a shutter door. A cabinet with communications can be decorated by connecting it into a common interior line. By creating niche shelves on the box, you can additionally solve the issue of storing small items.

Selection of plumbing unusual shapes and colors will give the space originality. The main thing is that the non-standard ones chosen fit into overall design. The combination of ceramic tiles and mosaics can refresh the interior. The finishing materials can be anything, the main thing is that they meet the requirements of moisture resistance and hygiene.

A shower stall is not a luxury, but a necessity. A bathroom equipped with a shower can be functional, beautiful, and meet all modern requirements. Various models will find their home in a space of any size, of every possible design. Having a shower in the bathroom will help make everyday life simpler and make self-care easier.

The desire to rest comfortably and relax in the bathroom of your dreams is the idea of ​​all women who change the interior of their home. Ideas on how to redesign a room or create a model of a bathroom interior should be entrusted to professionals in this field. When choosing furniture for a small room, ideal option There will be a bathroom with a shower, which is not only comfortable, but also functional.

Features of the interior of a bathroom with shower

The design should be considered from the point of view of convenience and coziness; the color scheme and location of all items are important. Do not choose annoying colors for the bathroom, or too many bright accents, the choice should be made on calm, warm shades. The color of the walls and floor is chosen based on the size of the bathroom; light-colored tiles and mirror inserts will visually increase the area of ​​the room. In Khrushchev or big apartment the bathroom should be rationally arranged, equipment should be compact, not taking up extra centimeters of space. Decorating the walls with a pattern or ornament that matches the style of the room will look harmonious with the rest of the interior. The interior of a bathroom with a shower will look elegant, combined with a minimalist style.

The parameters of the bathroom of a small apartment, as in a Khrushchev-era building, speak for themselves - at best it is 6 square meters. You will need to place all the furniture and plumbing fixtures rationally and without frills. Given the limitations of square meters, there is no point in considering a bathroom and a bathroom separately; the only suitable option is to combine these items in one area. The design of a bathroom with a shower will combine beautiful booths made of tempered glass, which is resistant to mechanical damage. The bath space can be diversified by installing unusual washbasins, where the water will turn on automatically when you raise your hand.

The main thing when planning a bathroom is to arrange everything ergonomically for the owners. The number of square meters and the shape of the bathroom will help determine the options for placing plumbing fixtures. For example, the chosen wall-hung washbasin will significantly save space and adapt to the style of any bathroom. Glass or marble they will attract attention. Ideas for replacing a regular sink with a wall-hung one are now relevant for any project. She will be able to blend seamlessly with the person standing underneath her. washing machine and hanging cabinets for small items above it. Options for planning a bathroom with minimum square meters can include a shower stall with or without a tray, hydromassage functions or with a drain in the floor. Everything is determined on the spot, taking into account the parameters of the room and the planned interior items.

Bathroom layout in Khrushchev

In addition to the wishes of the residents, it is worth noting that in Khrushchev they try to use every square meter of the bathroom to its advantage. The design of a small bathroom with a shower is considered from the point of view of minimalism; the combination of several items should fit harmoniously into the interior.

Standard set of equipment and accessories for a bathroom in Khrushchev:

• bathtub or stall with tray;
• wash basin;
• a pencil case for storing all bath accessories;
• mirror with hanging cabinet;
• toilet;
• hangers for towels and clothes;
• laundry basket;
• heated towel rail.

If the room area is too small (less than 3 square meters), you should choose only the most necessary accessories. A bathroom with a shower would be appropriate for such an interior; glass or frosted doors will visually expand the space of the room. Decorating an entire room in a Khrushchev-era building with ceramic tiles is practical and modern. A contrasting finishing solution can be a combination of two or three color schemes against the background of one room. Ideas for tiling a bathroom may include making a built-in hatch, it will be closed from children and store household chemicals. Also, a cubicle combined with a bathroom will save space, for example, for a washing machine or additional installation bidet. Cabins in the bathroom are a radical option for changing the interior.

Advantages of a shower stall in the bathroom

Having decided to change the bathtub to a shower stall, you should think about whether this option will not suit those who like to soak in warm water. Bathroom cubicles are designed for a small area; they occupy the corner part of the room, separated by glass doors. When choosing a tray, you need to pay attention to its depth; if you have a child, it is recommended to use a deep tray in which you can wash him. Ideas with frosted glass, like partitions with the main room, are suitable for those who strive for privacy. A bathroom with a shower will save the amount of wasted water, as practice shows. By using a non-slip tray, a person can eliminate the possibility of slipping and getting injured. Unlike taking a shower in the bathroom, even with a special curtain, a shower stall will save the owners from unnecessary stains, and the tiles will remain clean and dry. Hydromassage functions of the cabin or a tropical shower, being part of the package, can relax a person and get rest.

Taking a shower will be more hygienic, as dirt will be immediately washed off the body. Another advantage is the speed of cleaning; such bathrooms are equipped by people leading an active lifestyle. Expensive models can afford to have a radio or telephone inside the bathroom.

Tile design for bathroom with shower

Before choosing accessories and plumbing fixtures, you should consider color scheme ideas. To visually expand an area of ​​2 square meters, you can make mirrored walls or decoration light colors. It is unacceptable to use dark colors - blue, dark gray or brown, as this will narrow the visible space in the room.

The shower stall is almost always made in white, so soft blue or yellow colors will look contrasting against its background. Plumbing fixtures can match the chosen tile color. You can zone a shared bathroom and shower stall with a tray using vertically laid tiles, which will separate these two zones. If there is a shower stall, the drawings lose their relevance and are replaced by smooth transition lines in shades or an ornament along the dividing line of the zones.

When choosing harmonious finishing materials for the bathroom, you need to know that you should not combine more than three tones in one room. In most cases, make the ceiling light and the walls more dark shades. Fashion trends dictate a departure from the classic white color, introducing rich pastel colors as part of the interior. When developing a room design, it is taken into account that the lack of demarcation between the shower area and the rest of the space will visually increase the area. Vertical stripes have the same effect of making a bathroom appear larger. If a decision has been made to delimit zones in the shower, this can be done with thin stripes of contrasting shades.

Shower location

A bathroom with a shower of 5 square meters must be planned to the nearest centimeter in order to correctly install the necessary equipment, especially if the installation takes place in a Khrushchev-era building. Placing a toilet and a shower stall in a bathroom 1.5–2 square meters wide would be an ideal option. A shower corner in a Khrushchev building frees up space for a full-fledged room. The ideas of creating combined options in small spaces are widely known; the addition of a washing machine or laundry basket is also being considered. It would be ergonomic to install a shower stall with a tray next to the sink. R The dimensions of the cabin are ideally 80 by 80 centimeters, and the sink is no more than 50. A shower with meter width and length parameters will take up too much space in the room.

Rational placement of equipment and furniture for small items is possible by adhering to the following rules:

• a prerequisite for the location of plumbing fixtures in the bathroom is a distance of 30 centimeters;
• separation of the bathroom area from the corner with the cabin;
• For owners with children, it is more profitable to purchase a cabin with a pallet;
• availability of free space for changing clothes in the bathroom up to 90 centimeters;
• determining the size of the corner depending on the composition of the household.

Bathroom layout with bath and shower (4.8 m?)

Bathroom layout with bath and shower (5.2 m?)

Bathroom layout with bath and shower (5.5 m?)

Bathroom layout with bath and shower (6.3 m?)

Bathroom layout with bath and shower (6.7 m?)

Bathroom layout with bath and shower (6.9 m?)

Bathroom layout with bath and shower (7.2 m?)

Bathroom layout with bath and shower (7.7 m?) Bathroom layout with bath and shower (8.4 m?) Bathroom layout with bath and shower (9.5 m?) Bathroom layout with bath and shower (9.9 m?) Bathroom layout with bath and shower (13.8 m?)

Selection of finishing materials for the shower

Taking into account financial capabilities, the owner chooses a finish for his bathroom that will be the envy of friends and relatives. An inexpensive and common cladding option is ceramic tiles. It is durable, moisture-resistant, ergonomic to care for, and safe for children and adults. Designers decorate the bathrooms of classic versions in Khrushchev, resorting to patterns and designs, ornaments or bright moments, like accessories. Decorating a room in white tones with shades of gray and brown will demonstrate the French Provence style, with its elegant interior lines. At the same time, above the tray in the booth, you can make a color completely different from the general interior, focusing attention on the most important thing.

The decor of a bathroom in Khrushchev can be made using various colors; the shape and size of the tiles can expand or reduce the space. Mosaic patterns are often used for small spaces, a standard solution for a 2-meter bathroom. They can completely decorate the entire bathtub, dividing it into two tones, or make a decorative niche or recess.

More expensive material For room design, porcelain stoneware is more expensive and durable. It goes well with moisture-resistant plaster, shading it. Porcelain tiles presented different colors and drawings, you can cover several areas of the bathroom.

Marble products are used by designers to decorate a washbasin or the floor of the shower stall itself; it will add luxury and sophistication to the interior of the room. The marble surface is susceptible to scratches, but is excellent at withstanding heavy objects falling.

Bathrooms equipped with shower cabins have become increasingly popular lately.

It doesn’t matter so much whether you live in a private house or an apartment - you can install and stylishly decorate a shower in almost any room. The only difference is the size of the bathroom.

With private houses, everything is simple - a spacious room allows you to implement many design ideas, correctly arrange equipment and accessories.

In apartments of multi-storey buildings, as a rule, bathrooms are small - you don’t see a separate bathroom there so often.

But what should owners of small apartments do who want to decorate a bathroom with a shower in accordance with the latest fashion trends? You will learn the answer to this question from this article.

Shower stall for the bathroom – choose the right one!

While preparing the room for installing a shower stall in the bathroom, you have probably already looked at several interesting models.

However, there is no need to rush into purchasing - a hastily purchased cubicle may simply not be the right size for your bathroom. Therefore, you should first take measurements of the place where you plan to install it, accurate to the millimeter.

The next step is to choose a shower stall for the bathroom. They come in different colors, shapes, materials from which the frame and pallet are made - these are all very important points that cannot be ignored.

Not only the appearance of the entire bathroom, but also the amount of money spent depends on the selected characteristics. We will look at two main types of structures:

Open showers. This design consists only of a pallet and side walls. The cabin is not equipped with any special functions - they are simply not needed here. This is the most common shower enclosure, fixed to the wall with the front walls.

Enclosed showers. This design is more advanced, has a deep tray and roof, and is protected on all sides by walls. Often, such boxes are multifunctional and can have a rectangular, round or triangular shape.

Compact and stylish design options for a bathtub with a shower stall

In conditions of limited space, all objects and elements used should be as compact and mobile as possible.

Take a few ideas for optimal placement of a shower stall in a small bathroom:

Combined bathroom, equipped with minimal space. Typically, such a small area of ​​the room is allocated only for the bathroom.

However, if you approach the issue professionally, even a small room will fit everything you need. To achieve this result, you should choose the simplest possible shower stall, without additional parts or specific functions.

The tray should be shallow and the walls transparent. Otherwise, the space may feel crowded. A mirror placed opposite the booth will benefit a small space - making it visually wider.

Expanding the space by properly combining the toilet and bathroom. Most effective method increase the space - make one room out of two. The wall that previously divided the bathroom will become an excellent partition in the newly formed room, if it is not completely demolished.

When decorating such a bathroom, I often use warm colors. To add originality to the interior, you can use several shades of the same color.

You can install a very ordinary shower cabin - maximizing the free space in such a room is much more important than the additional functions of the cabin. Give preference to smooth transitions and rounded shapes - this will significantly soften the interior.

Bathroom in light cool colors. Such a room may not seem very attractive at first glance, but even it has its own zest and design idea.

Decorating walls, floors and ceilings in gray, white and beige tones is a sign of a strict and official style. In such a bathroom you will not find home comfort, but it shouldn’t be here.

Such an interior speaks of the neatness and efficiency of the owner of the house. One of the undoubted advantages of this design option is the ability to select and install a large shower stall, which has a number of additional functions.

Shower stall in the interior of a Khrushchev-type bathroom. The room reserved for the bathroom in old Khrushchev apartments is not large in size, but even it can be optimized and decorated, taking into account the wishes of the owners.

The shower stall in such a room will occupy most of the space. Therefore, you should choose light colors for decoration and decoration - they will visually increase the size of the bathroom and it will not seem too cluttered. Semicircular frosted shower doors will cover part of the wall, making the room seem larger.

Small but stylish bathroom with shower. It probably seems to you that the small dimensions of the room will not allow you to realize the modern design of a bathroom with a shower stall that you like? Remember - competent zoning space just works wonders!

A shower stall located in the corner will not take up much space, which means that the remaining area can be used to place a bedside table, towel holders, and even to install a washing machine.

To decorate the walls, you can use ceramic tiles in two contrasting shades. This technique will certainly attract the eye and become a unique highlight of the interior.

How can a shower cabin surprise us?

Enclosed shower enclosures almost always come with several additional features. Among them are:

• Backlighting (creates an intimate atmosphere, allowing you not to use the main lighting in the bathroom, can have a chromotherapy effect);
• Aromatherapy (the cabin is filled with your favorite aromas);
• Heavy rain (water jets of incredible power pass through a special nozzle);
• Contrast shower (frequent changes in temperature energize and have a positive effect on work activity);
• Bathhouse (humidity in the cabin rises to a maximum, and the temperature ranges from 40 to 60 degrees)

As you can see, if you take a professional approach to creating the interior of a bathroom, it will accommodate not only a shower stall, but also many other important little things.

Your favorite modern shower design will last longer if you take the time to proper preparation premises and think through all the details in advance.