Types of LED ceiling lights for the home. How to choose the right LED ceiling chandeliers for your home LED ceiling lights for your home with backlighting

The times when apartment ceilings were a dull white surface with a front door located in the middle are a thing of the past. Instead, multi-level complex plasterboard and tensile structures, which effectively accommodate LED ceiling lights for the home. An overview of the market for modern LED products will help in choosing the optimal model that is stylistically consistent and takes into account the height of the room.

How to choose LED ceiling lights for your home: lighting requirements

LED products are available in a huge range. It is very difficult to choose suitable lamp models among the thousands of options offered. Moreover, it is necessary to take into account not only original design and design lighting fixtures, but also their compliance with certain requirements: efficiency, safety and level of illumination.

The modern market offers a huge range of LED lamps for various purposes.

The allocation of lamps into separate groups depends on the following factors:

• scope of use – office, industrial, decorative, landscape, architectural, emergency;
• installation location – ceiling, wall, furniture;
• design – built-in, overhead, linear, with built-in and external driver;
• shape – round, square, rectangular, triangular;
• purpose of the premises - for the living room, bedroom, children's room, hallway, kitchen, bathroom, etc.

In addition, LED lamps are available with a built-in converter and with an external one. As a rule, built-in drivers are mounted in overhead lamps, since they have a larger body. Some lamps have designs; in other models, instead of a lamp, a matrix of several LEDs is used. Such models are the latest and fairly reliable option.

When choosing LED ceiling lamps, special attention should be paid to the degree of illumination for a particular room and the ability to regulate it. To do this, you should consider devices with a dimming function, as well as models with a built-in motion sensor.

To correctly determine the power of wall-ceiling LED luminaires planned for installation, it is necessary to use certain rule. If, before replacing the light source, an 80 W incandescent lamp was used, then a similar level of illumination can be obtained using a 12 W LED lamp.

Designs of overhead LED ceiling lamps for home

The advantage of using overhead lamps is that there is no need to pre-prepare a recess for mounting them. They are mounted on a flat ceiling surface using self-tapping screws. Moreover, the ceiling structure can be made of any material: concrete, plasterboard, wood. The absence of fragile parts in such lamps prevents accidental damage to the lampshade.

Manufacturers produce models of overhead LED ceiling lamps in round and square shapes. They are installed mainly in rooms technical purpose: kitchen, bathroom, toilet. It is possible to use them to illuminate the living room and children's room. The choice of a specific model depends on the style and dimensions of the room.

When planning the lighting of a room, focus on the power, size and color of the lighting of the surface-mounted lamp. The glow colors of such lamps can range from standard white, warm and cold shades to warm yellow light.

Helpful advice! If you plan to use overhead LED square ceiling lamp in a combined bathroom, pay attention to the level of moisture protection of the device.

In the interior spacious rooms It is customary to use dimensional models. Large overhead LED ceiling lights 595x595x50 mm are more often used in office premises. However, if your home has a billiard or sports room of impressive size, such a device can be used to illuminate it. A photo of overhead LED ceiling lights for the home illustrates the possibility of using them as a replacement for Armstrong-type ceiling tiles.

LED ceiling lights for home: recessed models

If the replacement of all old light sources coincides with the time of repair, it is advisable to use recessed LED ceiling lights. Even at the project development stage, it is possible to provide for the placement of lamps and carry out the appropriate preparatory measures. Thanks to this, thoughtful lighting can highlight all the advantages of the interior.

Recessed LED luminaires for suspended ceilings

The design of built-in devices consists of a lamp and special fastenings, which are holder brackets with springs. Thanks to simple mechanism fastenings, lamps are easy to install and remove. If the ceiling space is small, it is recommended to use designs with a thinner housing and an external driver. Models with a volumetric body are suitable for structures with a large ceiling gap.

The recessed round LED ceiling lamp with a diameter of 280 mm with a large luminous flux of 2240 Lumens has a thin body and a laconic design. The diffuser is made of durable acrylic polymer, due to which the lamp emits soft light. This model can be used as the main lighting of the room space.

Helpful advice! The use of ultra-thin LED recessed panels with a thickness of about 1 cm makes it possible to create fairly compact lighting systems.

For an interior whose design is dominated by strict geometry, it would be appropriate to use square-shaped LED ceiling lights for lighting. Depending on the power of the LEDs, several such lamps can be built into one or several rows. Some people prefer to supplement the main light source with small LED ceiling spotlights of the appropriate shape located around the perimeter.

Layout reception central lighting with recessed LED ceiling lamps (photo examples illustrate this) allows you to achieve high-quality illumination of the entire room and place light accents on individual decorative elements. A combination of several types of lighting operating in different modes, significantly saves energy costs.

Installation diagram of built-in point

Use of recessed LED ceiling lights in the interior

With the help of recessed spotlights, you can not only illuminate the room with high quality, but also create certain zones, each of which requires different lighting intensities. In addition, spot lighting can be used to delimit space or provide nuanced illumination of decorative elements, setting the tone for the overall interior.

Spot devices consist of two parts: the built-in part is mounted into the ceiling surface, and the front part remains visible. Manufacturers offer many design options spotlights: with matte, transparent, reflective glass, with crystal mini-shades, with gold, silver, matte frame. In a word, you can choose a lamp design to suit any interior style.

Exist rotary models lamps, the design of which provides for rotation of the body. Thus, their glow can be directed to a particularly successful decorative composition. For high ceilings, spotlights have been developed - spots. They can be single, double, or form an entire lighting system. Spots can be rotated in all directions, like a spotlight, changing the area of ​​illumination.

A very popular option is to use spotlights built into furniture. For this purpose they mainly use round shapes lamps with a thin body. Installation involves preparing the hole required diameter, into which the lighting fixture is inserted. Main application: lighting working area kitchen surface, illumination of the contents of cabinets, dressing rooms and pantries.

The use of spotlights in the bathroom involves choosing sealed models with a certain degree of moisture protection and a reduced operating voltage. These parameters can be seen on the product packaging. In addition, it is very important to choose a glow color that is close to natural, since this particular room is used for hygiene and cosmetic procedures.

Helpful advice! It is not recommended to connect LED lamps to a switch with a backlight function. This will contribute to unstable operation of the lamps and shorten their service life.

When using spot lighting for a stretch ceiling, you should take into account a number of nuances regarding the operating conditions of the tension surfaces. To do this, it would be useful to consult with the sales manager of this product.

LED ceiling lights for stretch ceilings

The technical characteristics of LED ceiling recessed luminaires for suspended ceilings must meet certain requirements. Lighting, first of all, should be evenly diffused and create a comfortable atmosphere. You should avoid using massive lamps for structures that are modest in size: they will only enhance the impression of limited space.

Manufacturers offer very wide choose options

The limitless variety of LED spotlights for suspended ceilings allows you to find models applicable to any style. It should be noted that among them there are two main groups: devices with internal and external location lamps. The internal layout of the light source provides directional light, creating a unique effect.

When choosing the type of lamp, you should take into account the temperature and power limitations of the devices. In this sense, in combination with a suspended ceiling, it is preferable to use devices with an external source. The external placement of the lamp in the luminaire creates diffused light and allows the use of devices with a variety of decorative elements: chrome frame, crystal pendants, glass shades etc. Such lamps do not emit excess heat and cannot cause deformation of the tension covering.

Using spotlights with a flickering effect in stretch ceilings, they create the light illusion of a starry sky. Using such light sources you can create a beautiful ornament or pattern. For owners of multi-level structures, designers recommend using lighting for each tier of the ceiling. Using LED ceiling lights with a control panel will make lighting adjustment comfortable and quick.

Price of spot recessed LED ceiling lights

Before ordering and purchasing LED products, you need to arm yourself with certain knowledge in order to really evaluate all the advantages of the chosen lighting. First of all, pay attention to the manufacturer of LED devices. Products from well-established manufacturers will be of high quality and will last a long time.

Helpful advice! When choosing LED products, give preference to lamps from trusted manufacturers.

Main and decorative lighting projects using point light sources make such lamps extremely popular. High fire safety allows them to be used even for lighting poorly ventilated rooms. Laconic design, compactness and versatility of use are the main criteria for choosing such products.

You can buy spotlight recessed LED ceiling lights at lighting equipment sales outlets or on manufacturers' websites. The price depends on the design, materials used, number and type of lamps and many other factors. The cost of the simplest square lamp with a plastic shade and one lamp can be up to 350 rubles. More advanced models with two light bulbs reach a price of over 10,000 rubles.

Online catalogs contain photos and prices of LED lamps for suspended ceilings. This makes it convenient for consumers to familiarize themselves with the range and cost of products. In addition, consultation with professionals will allow you to right choice lamps for use in one or another ceiling construction material.

Specialists can also offer an overview of recessed LED ceiling-wall luminaires for rational organization various types of lighting. All lighting devices are provided with a manufacturer's warranty. Discount systems and product return conditions have been developed.

Applications of Armstrong recessed LED ceiling lights

The design of Armstrong LED ceiling lamps is a group of LEDs combined into a common circuit and fixed in the lamp block. Depending on the number of diodes in the device, lamps can have different power. The devices are fastened by inserting them into sections of the suspended ceiling structure.

The main area of ​​use of Armstrong 600x600 mm LED ceiling lights are public, commercial and industrial premises: supermarkets, train stations, schools, workshops, etc. However, they can also be used as lighting for the residential sector. Typically these are spacious bathrooms, spacious hallways or rooms for sporting events.

Helpful advice! LED lights Armstrong type create cold White color glow, which does not distinguish them among devices that promote maximum home comfort.

The price of Armstrong type ceiling lamps is quite high. Therefore, their use is beneficial to those who will receive real savings in energy consumption if they are used. Purchasing cheap Armstrong 600x600 mm LED ceiling lamps is possible if you purchase a large batch of products, which is only possible for large institutions.

It is worth noting that in addition to a number of positive technical characteristics, Armstrong ceiling lamps can be used for both built-in and surface mounting. This versatility makes them popular among other models. The price of an LED ceiling overhead lamp 600x600 mm is from 900 rubles.

Review of LED ceiling chandeliers for home

Whatever lighting method you choose, the lighting design will be incomplete without installing an elegant chandelier that matches the overall theme of the interior. And if in the hallway, bathroom and bathroom the presence of a chandelier is not at all necessary, then rooms such as the living room, bedroom, nursery and kitchen need a central source of lighting. The design of modern LED chandeliers is so diverse that it is quite difficult to group them even by style.

An example of the use of ceiling LEDs in the interior of a living room

Based on the mounting method, chandeliers are divided into pendant, built-in, and panel. The choice of lighting fixture depends not only on general design premises, but also on the height of the ceilings. An elegant and elegant chandelier with a low suspension will look too pompous on a ceiling whose height is less than 2.5 m. In such a room, it is more advisable to use built-in or panel fixtures.

It is possible to install not one chandelier in the center, but two or three identical devices on one center line. This design of the ceiling can visually lengthen the room. For the kitchen-dining room, a method of lighting the area is used dining table or the use of several lighting fixtures with stylish shades above the bar counter or kitchen island. Typically, such lamps can be adjusted in lighting height.

LED selection ceiling chandelier for home with a remote control will allow you to control the light flux without leaving your cozy chair. As a rule, such lighting devices have several operating modes, including smooth and step adjustment. Some models have the option of turning on separate groups of lamps, which also allows you to achieve a certain level of illumination.

The option of using a central chandelier for suspended ceilings is not excluded. The main requirement for such lamps is the use LED sources Sveta. Reflecting from the glossy surface of the ceiling, multi-colored highlights create a spectacular glow. You can decorate a children's room with a themed chandelier, trying to choose a model that matches the additional lamps.

LED lamps offer a lot of possibilities. With their help, they are created unique systems lighting, the main criteria of which are effectiveness, comfortable perception and safety.

Have you decided to replace incandescent lamps with more economical diode devices? The prospect of getting well-organized lighting and at the same time saving on utility bills is very tempting. Isn't that right? But you don’t know how to choose LED ceiling lamps and which manufacturer to choose?

We will help you figure out LEDs for ceiling lights. The article discusses the types of devices, their pros and cons. Selection criteria are given optimal option taking into account the expected effect of the new light bulbs.

The visual illustrations and video recommendations attached to the article will help you make your choice. The transfer will contribute the best manufacturers with a reputation in the lighting market. With our tips in mind, you can make an informed purchase.

The operation of the products is based on the principle of electric luminescence. A current flow passes along the boundary of two different semiconductors. At this moment, electromagnetic radiation is released, which lies in the color spectrum visible to the human eye.

Structurally, the lamp consists of a housing, inside of which there are semiconductor light sources, a diffuser lens, a cooling radiator and a driver.

A light bulb with white LEDs lasts less. It makes more sense to purchase a module with one strong or several weak elements of blue color, coated with phosphor. Such products will work for the stated period and provide a bright light flow that is pleasing to the eye.

The first LEDs had a distinctly red glow and were extremely expensive. When blue elements were invented, lamps became significantly cheaper and became available for the widest use in industry and everyday life.

Types of ceiling lamps

Ice lamps for ceiling lighting are produced in the most unusual configurations and differ in the type of base. Screw products have a thread at the bottom for screwing in and are marked with the letter “E”. Next to it are usually numbers showing the base diameter of the threaded connection.

For domestic use, screw LED modules E14 and E27 are most often used. These are universal elements suitable for most ceiling lighting fixtures, both modern and vintage.

The second type of base is called a pin base and is marked with the letter “G”. Structurally, it consists of two small metal antennae that act as electrical contacts. With their help, the lamp is tightly attached to the lamp socket and held securely there during the entire working period.

The marking of pin-type lamps after the letter “G” may contain other letters and/or numbers. They all mean Extra options configurations and more clearly outline the area of ​​intended use of the LED element

The remaining bases, designated by the letters B, R, P, S, K, T, W, have a more narrowly specialized focus and are used much less frequently in everyday life.

What to look for when choosing?

Ceiling lamps based on LEDs differ according to the following important criteria:

• supply voltage;
• operating current level;
• base power;
• light output efficiency;
• shade (temperature) of the supplied light flux;
• radiation angle;
• shape and size;
• period of degradation.

All these nuances must be taken into account when purchasing. Only they will help you make the right choice and purchase a device that exactly meets all the requirements that the client places on a home lighting system.

The shape of LED lamps is so diverse that it is not difficult to find an element that is ideal for any ceiling lamp configuration.

If you ignore any of the above points, the expenditure of financial resources on the purchase will be in vain, and it will not be possible to create the necessary level of coziness and comfort in the living space. general household use have operating power from 3 to 15 watts.

Similar indicators for modules intended for industrial use reach up to 100 W. The emitted light flux demonstrates high intensity even at minimum costs electrics allows you to illuminate rooms of any size.

Lamps have from one to several dozen LEDs. This makes it possible to provide diffused or directional light, depending on the individual needs of the client

The efficiency of products is 90% and in this parameter LED products are significantly ahead of any other light sources.

Criterion #1 - temperature of the light produced

The glow spectrum of all supply sources is divided into three main groups according to. The first includes elements that produce warm white light ( Warm White), very similar to the effect of a classic incandescent lamp.

They operate in the temperature range from 2700K to 3200K and are recommended for use in residential areas.

Warm LED lamps for ceiling lamps can create a cozy atmosphere in the room, conducive to comfortable rest and pleasant communication

The second group includes the spectrum from 3500K to 5000K. This light is called normal or daylight white ( Neutral White) and visually resembles the glow of the morning sun of good brightness.

It is perceived as neutral to the eye and is excellent for use in technical rooms houses or apartments, offices, classrooms and classrooms, production workshops, etc. Experts indicate that neutral lighting helps increase productivity, helps concentrate attention and does not lead to eye fatigue.

Lighting with neutral LED modules emphasizes the sparkling cleanliness of the bathroom and gives sanitary fittings an elegant and bright shine

In the range from 5000K to 7000K there are cool white lamps that produce very bright daylight ( Cool White). IN living rooms they are practically not used.

These modules are mainly used in hospital buildings, laboratories, corridors and technical premises.

Criterion #2 - radiation angle indicator

So important parameter, like the radiation angle of lamps different manufacturers ranges from 20 to 360 degrees. This means that the LEDs shine brighter in the center, and reduce the illumination level towards the edges of the dispersion angle.

Modules with a wide spectrum of dispersion differ from conventional LED lamps in that they have a front matte lens, rather than a transparent one, through which you can see interior design products

This principle of operation allows us to ensure high-quality light supply to a specific space, spending significantly less power on the task. If there is a need to increase the useful illuminated area, an additional diffusion lens is built into the lamp.

Criterion #3 - marking of the size range

All manufacturers of LED ceiling products produce lamps of fundamentally different sizes and configurations.

The most common forms are the following:

• A– corresponds to the type of classic incandescent lamp;
• B– resembles an oval with a blunt end;
• C– looks like a candle flame;
• C.A.– called a “candle in the wind” and has a pointed edge slightly bent to the side;
• CW- looks like a candle twisted in one direction;
• G– is a traditional ball;
• E– is an elongated ellipse;
• R– equipped with a reflector (reflector);
• BR– has a convex reflective surface and a slightly larger size than the R-module;
• M.R.– equipped with a mirror reflector;
• PAR– has a reflector of an unusual parabolic shape;
• T– made in the form of a tube, on the surface of which working LEDs are located.

It is these ice lamps that are most popular and are most often used for arranging household and home comfortable lighting systems.

Criterion #4 - glow degradation time

A decrease in the intensity of a lamp's glow over time is a natural process caused by clouding of the crystals during prolonged use. Professionals call this degradation. When this happens, the efficiency of the lighting element decreases and the light saturation of the flux is noticeably weakened.

For LED products famous brands The light intensity decreases towards the end of the stated service life. Unnamed Chinese-made modules are more susceptible to this and may begin to fade at the very beginning of their operation.

Advantages and disadvantages of LED lamps

Lamps powered by LED elements have a whole range of unique advantages that allow them to be used not only exclusively for lighting, but also to create an original and unique atmosphere in the premises.

With the help of these progressive means you can give bright accents even himself simple interior and do an ordinary room stylish and exclusive.

Advantages of LED products

The operating temperature is so low that the device can be placed in close proximity to materials that are flammable or prone to melting.

With the help of LED lamps, you can brightly and unusually arrange the lighting of a stretch ceiling. LED elements will give the fabric a pleasant glow and create an overall radiance effect.

The option to adjust the direction of the light flow makes it possible to create zonal lighting in the room, emphasizing the style and originality of the design solution.

In this option, some places will be illuminated brighter, while others will go into the shadows and acquire some intimacy and intimacy.

If the ceiling lamp is used for background lighting, it is better to equip it with lamps low power With different temperatures radiation. When you need to direct the beam to a certain area, you will need a spotlight with a mode for adjusting the direction of the light supply

Another undeniable advantage is the resistance of LEDs to cyclic load. They can easily withstand huge amounts of activation and immediately flare up in full force when turned on and immediately go out when the user presses the “off” button.

LED products are completely environmentally friendly and incredibly durable. Unlike conventional energy-saving modules, they do not contain mercury, are not afraid of shocks, vibrations and low temperatures

The ability to consume electricity economically also adds points to Led light bulbs. They consume 20 times less electricity than similar classic devices, while producing lighting of the same power.

The service life of LEDs is measured in hundreds of thousands of hours. They burn for a record long time without replacement, without forcing the owner to constantly spend money on buying new lamps. The absence of UV radiation is one of the very attractive features of LEDs.

Working indoors even for a long time, they do not provoke fading of furniture upholstery, do not contribute to the fading of wallpaper and do not cause cracking of paint on paintings. It is these moments that make ice products attractive and encourage users to give them preference.

Disadvantages of LED ceiling products

LED products also have disadvantages, although not to the same extent. large quantities as dignity. The most important thing that is reproached for LED elements is the initial high price. Of course, this applies to devices produced under well-known and popular brands.

LED lamps cannot be screwed into closed lighting fixtures. Being subjected to constant overheating, they lose brightness and fail much earlier than the manufacturer promises.

Unbranded Chinese versions are readily available, but should be purchased with great caution. And you shouldn’t expect that cheap options will meet all the parameters and last a long time. The price reduction here is achieved by saving on components, which, naturally, has a bad effect on the quality of the products.

Sensitivity to elevated room temperatures somewhat limits the scope of use of ice products and does not allow their use in baths, saunas and other similar places

In addition, LED products may not operate correctly with switches equipped with LED backlight. They flicker or begin to glow faintly when the device keys are turned off and create inconvenience for people who are in the room at that time.

Top list of the best manufacturers

The market for progressive LED equipment is saturated with offers from various brands. The leading positions in the segment are occupied by several brands that have proven themselves to be producing reliable, high-quality, durable and environmentally friendly products.

No. 1 - Philips brand products

The company produces a wide range of LED lamps for. The line includes modules that differ from each other in power, intensity luminous flux, color temperature and energy efficiency.

Lamps from Philips from the Essential series are suitable for surface-mounted ceiling luminaires. They provide daylight indoors, do not cause eye fatigue and create a soft, pleasant atmosphere around

Products from Philips are considered one of the most reliable and environmentally friendly, almost always fully exceed the service life declared by the manufacturer, and are sold for very reasonable money.

The manufacturer has official representative offices all over the world, so buy a real one original product from Philipps, and not a Chinese counterfeit, is a no-brainer.

No. 2 - Osram LED modules

Products from a German company are no less popular. This is one of the oldest brands operating in the manufacturing of lighting equipment. First entered the market in the spring of 1906 and since then has been increasing production and providing customers quality elements for comfortable, economical lighting.

Osram LED lamps, designed for installation in ceiling luminaires, are characterized by record low energy consumption and immediately after switching on they supply 100% luminous flux without the traditional ignition delay

Today Osram is part of the industrial sector of the international concern Siemens and is considered one of the leading manufacturers of innovative high-level lighting products.

The company's annual turnover exceeds 5 billion euros. Lamps of the German brand are produced at 48 modern enterprises, deployed in 17 countries around the world. The brand spends 5% of all profits on progressive research that helps improve LED products.

No. 3 - lamps from Foton Lighting

Foton Ligting Ltd is located in London. It produces and sells various types of elements necessary for modern systems lighting. The brand's priority is the production of advanced, innovative and high-tech products.

Ceiling lamps from Foton Lighting are recognized as favorites in the budget segment of the market. The combination of reasonable price, reliability and impeccable quality has made them a competitive product that immediately stands out among analogues from other manufacturers

The product range is very wide and includes both basic standard models and creative products that satisfy the most extraordinary customer requirements for lighting systems.

No. 4 - Gauss products from the Vatron company

The trademark is owned by the young but very promising Russian company Vatron, founded in 2009 by the former development director of the Wimm-Bill-Dan corporation Denis Frolov. At the dawn of its founding, the company sold compact Chinese fluorescent lamps under the personal brand Gauss.

Products manufactured under the Gauss brand are of high quality, serve reliably for many years and have a company guarantee. By purchasing them from an official representative, the client can exchange the lamp for a new one within 3 years if it suddenly burns out

In 2010, Vatron acquired a co-owner, Ilya Sivtsev. A little later, both managers decided to refocus on the implementation of elements for LED lighting.

This thoughtful move brought the entrepreneurs a solid profit and allowed them to buy an abandoned plant in the Tula region to organize the production of their own LED products.

Effective investment in development, the creation of an advanced research laboratory and the organization of a research and production center allowed the company to begin producing progressive LED products.

By 2015, Vatron took control of about 18% of domestic Russian market lighting fixtures and related elements. Today the company produces modules of various shapes and designs and does not give up its leadership position in the budget segment of LED products.

No. 5 - Kreonix brand LEDs

The Russian manufacturer of LED equipment and related elements KREONIX Ltd offers customers about 400 types of progressive products manufactured according to the basic needs of consumers.

Kreonix provides a 3-year warranty on its products. During this period, the buyer will exchange the lamp for a new one if some of the LEDs in the old one have burned out (5% or more) and the brightness of the light flux has decreased by at least 10%

Modules are made in our own factory or purchased from popular and reliable Chinese factories, branded and sold at domestic market under its own brand.

Among the advantages of the products are record-breaking economical electrical consumption, the absence visible to the eye flickering, impressive service life. And also modern, attractive and functional design, allowing Kreonix lamps to be integrated into ceiling lamps of any design, even the most complex.

You will get acquainted with guidelines for choosing all types of light bulbs for spotlights, which we highly recommend reading.

Conclusions and useful video on the topic

A detailed and accessible description of the LED lamp for ceiling lights. Recommendations for use.

Full review LED light bulbs for ceiling lighting system. Pros and cons of the models, differences in the material from which the base is made.

What is the advantage of an aluminum case over glass, plastic and ceramic.

Practical advice on choosing LED lamps for home use. What you need to pay attention to when purchasing. Which lamps are more suitable for ceiling lighting?

LED lamps, designed to create comfortable ceiling lighting that is safe and does not strain your eyesight, can be purchased in company stores.

The high cost is compensated by the long service life and minimal electrical consumption. By purchasing LED modules, you will provide your home with high-quality light and will forget for a long time about what a burnt out light bulb is.

Please write comments, ask questions, and post photos in the block below. Tell us about how you chose diode light bulbs For suspended ceiling. Share useful information on a topic that may be useful to site visitors.

If you want to secure your home or office high-quality lighting, the LED ceiling lamp will become ideal option. The device is suitable for office or residential premises. The device is environmentally friendly and is suitable for suspended ceilings.

LED lamps are:

• Invoices. Models are installed on ordinary ceilings. The lamps are suitable for the hallway, kitchen, bedroom. They differ in shape and color of the lampshade.
• Mortise. They are installed on stretch ceiling. Recessed LED ceiling lights do not generate heat, which will allow the material to remain intact. They are suitable for lighting arched openings.

LED ceiling lights have different colour housings. White, matte color is popular. Depending on the purpose of the room, choose the type of lighting. Neutral, cool white, or warm colors are suitable for offices and apartments.

Where to buy diode lamps

Svetex company offers LED lamps and luminaires for home and work.

They differ:

• excellent quality;
• high lighting capabilities;
• long life of diodes;
• low energy consumption;
• simple installation.

To install LED ceiling lamps you do not need any special technical skills. In the Svetex store, customers will find safe lighting devices. They do not contain mercury, so LEDs can be installed in any room. You can order LED ceiling lamps at any time.

Our delivery service will deliver your order to any city in Russia. For orders over 3,000 rubles, delivery within Moscow is free!

See prices and delivery conditions on this page. Also we have installation service purchased lighting.

Our catalog offers LED ceiling lights, which are becoming increasingly popular in modern design. They are gradually replacing previously used incandescent lamps, as well as fluorescent and halogen lamps. This is due to their technical characteristics, environmental friendliness and ease of installation.

What are LED ceiling lights used for?

• long period of operation (more than 10 years);
• energy efficiency, allowing you to reduce electricity consumption up to 10 times;
• absence of IR and UV radiation;
• simplicity and ease of use;
• warm and soft radiation level;
• no buzzing or flickering;
• environmental friendliness (no toxic substances and heavy metals);
• affordable price.

Why is it profitable to buy LED devices in our store?

According to the method of fastening, structures can be:

• Invoices. Most often, these are devices with a small lampshade; they are installed on the surface using self-tapping screws or other similar types of fasteners.
• Hanging. Can be hung from ceiling structures on cords, pipes, chains.
• Built-in. Can be installed on suspended ceilings, suspended surfaces made of plasterboard or other similar materials.
• Mixed. Can be installed different ways on the ceiling or walls, suspended or overhead.

Based on their intended purpose, LED ceiling lighting is divided into:

• decorative, to create a stylish and original interior;
• specialized, designed for specific tasks(for Armstrong ceilings or housing and communal services facilities);
• smart systems having remote control, automatic adjustment functions, color temperature adjustment, and other “smart” functions;
• universal, which is distinguished by its discreet design and simplicity of construction to fit any interior.

Nowadays we have a large assortment. Many domestic and foreign manufacturers produces similar products today. Choosing the right product for your interior is actually not so simple, since modern tendencies When organizing lighting in a home, they require that the energy consumption systems used not only be stylish and original, but also cost-effective and safe. Let's try to choose the best LED lamps for the home.

Requirements for organizing home lighting

Cost-effectiveness when using LED lamps begins with the choice of base. To be able to use energy-saving lamps in the future, you should initially purchase lamps with E14, E27, GU5.3 or GU10 sockets. Do not install lamps with other markings in the socket. The most popular types of LED lamp sockets are E27 and E14.

When choosing LED lamps, you need to pay attention to their dimmability, since different rooms required various characteristics(direction and power of rays).

When replacing regular old lamps with LED lamps, you should use the rule of multiplication by 6. So, if the power of the old lamp was 80 W, then it is enough to purchase an LED lamp instead with an energy consumption of only 12 W - it will create a similar level of illumination.

LEDs cannot be connected to illuminated switches. The lamps will operate unstable, which reduces their use time.

If you have not previously dealt with LED lamps, then it is better to buy products famous manufacturers(PHILIPS, PAULMAN, BIOLEDEX, OSRAM). When using them, at least there is a guarantee that specifications indicated in the passport will correspond to the actual performance of the product.

Attention! The original barcode is applied to cardboard box, not on a sticker.

An exclusive option - if the house has its own swimming pool. It can be illuminated in an original way with underwater LEDs, so as not to fall into the water in the dark. When the pool is illuminated, safety is increased.

Never use 220 V voltage to power LED water lamps. Modern models can be powered by 12 or 24 V step-down transformers.

If you plan to use many spot LEDs of different colors on the ceiling, connect them to different switches. At a certain point in time, you will be able to save electricity, but not lose light.

On the market today there are not only lamps with a certain number of LEDs, but also combined solutions. For example, by doing individual order, can be made automatic system lighting. Agree that guests will not remain indifferent to such a service when, after opening the front door, magnificent lighting in the corridor automatically lights up.

Photocells can also be built into LED circuits. The sensors send a signal to the electrical circuit when a moving object appears on the road. Photocells will help turn on the lighting when it gets dark. If you have a certain budget, your smart home can turn on the LED lighting system automatically. To do this, it will be enough to equip it with a time relay.

What effects can LED lamps create indoors?

LED lamps in a room can generate intersecting, lunar, directional and diffused light. The combination of effects can provide originality, inimitability and uniqueness to the interior.

An object on which multi-colored light rays fall simultaneously looks attractive. Here are some examples of what LED lamps can look like:

With the help of LED lamps you can create the effect of casting shadows from certain items in room. To do this, you need to correctly calculate the location of the lamp relative to the positioned object.

Contrasting lighting can be created above indoor plants. It will favorably emphasize the advantages of your greenhouse or winter garden. To some extent, LEDs can be used for lighting on which flowerpots are installed, although fluorescent lamps are more acceptable for these purposes.

In general, with the advent of LEDs, apartment and house owners have a great opportunity to create an attractive interior.

Don't be afraid to get creative and play with colors to make your design more stylish.

Cost of LED lamps

You can buy a budget LED ceiling lamp for 800-5000 rubles. Raster classic models will cost the buyer 1,500 rubles. Built-in products – 3000 rubles, table lamps can be bought for 1500-3000 Russian rubles.

Instead of a conclusion. Modern LED lamps for the home have different price and quality. Agree, to create a comfortable and elegant atmosphere in a room you cannot do without modern LEDs. Not only do they save money electrical energy, but will also complement the room design with unique elements. Fans of eclecticism, modernism, hi-tech, functionalism and classicism will find suitable models of LED lamps on the market. Choosing them for your home is actually not an easy procedure and should be approached responsibly. Make your life more comfortable, more economical and more colorful!