home · Other · Insulation of saunas and baths with ISOVER products. Isover: Which thermal insulation is better: based on stone wool or fiberglass

Insulation of saunas and baths with ISOVER products. Isover: Which thermal insulation is better: based on stone wool or fiberglass

Isover Sauna is a multifunctional fiberglass-based insulation with a thermal and steam reflective side. The main purpose is thermal insulation of baths and unheated rooms with high humidity, but if desired, you can buy it for pitched roofs, protection of pipe communications, air ducts and equipment. According to reviews, the maximum effect of insulation with this building material is observed in cold climates, and significant savings in energy resources for heating are achieved. Installation of Isover mineral wool is not difficult; all work can be done by one person; a regular construction stapler is used for fixation.

Isover Sauna insulation is produced in the form of light, elastic mats made of fiberglass threads, laminated on one side with polished aluminum foil. To enhance the tensile strength characteristics of the reflective coating, a fine-mesh reinforced mesh is used. The structure of the insulation allows threefold compression; packaging with thick shrink film is very convenient to transport. After unpacking, Isover quickly accepts the required form and retains it throughout its entire service life. This brand is resistant to temperature changes and protected from moisture and hot steam, when correct installation it prolongs the durability of walls and ceilings in a sauna or bathhouse.

Description of material

The advantages of Izover Sauna include sound absorption, hygiene, safety, minimal thermal and steam conductivity. The insulation is resistant to rotting and other biological influences. Installation of Izover mineral wool on wooden walls baths and saunas can reduce heat loss by almost three times (from 52 to 18 W/m2) and, importantly, protects them from the penetration of hot wet steam. To the main operational characteristics foil insulation includes:

  • Thermal conductivity coefficient is within 0.041 W/m K.
  • Density – 11 kg/m3.
  • Recommended base material is wood.
  • Flammability group – G1.
  • Standard sizes: width – 1200 mm, length – 12500 and 6250, thickness – 50 and 100.

Insulation Isover Sauna matches international standards quality EN 13162 and ISO 9001, customer reviews are mostly positive. A huge advantage is the saving of time during the construction process, since the layers of thermal insulation and vapor barrier are laid simultaneously. Mats do not release toxins under the influence of temperature changes and belong to the low-flammable group of building materials.

Installation nuances

Manufacturer's declared scope of application: interior walls baths and saunas, but according to reviews, Izover foil insulation of this brand is often used to protect floors and ceilings, creating a kind of “thermos effect”. Opinions are divided: the density of the mats, in principle, is not high enough to insulate the lower horizontal floors, but in practice, buying a homogeneous insulation in bulk helps save money. How colder region, the thicker the mineral wool you need to buy, this is also true for periodically heated buildings. The main rule for installing Izover is to lay the foil side inside the room; violation of this condition is considered a gross technology error. The rolls are unpacked no earlier than 30 minutes before the start of work; after removing the packaging, the mineral wool should take its volume.

Fastening is carried out exclusively on wooden sheathing, it is advisable to slightly press the edges of the thermal insulation. The reinforced aluminum layer is fixed with staples; it is recommended to glue the seams and joints with reflective tape. It is advisable to think over the placement scheme and cut the mats in advance; the main requirement is to completely fill the space between the battens. Important nuance: between the foil layer of thermal insulation Isover Sauna and external finishing a mandatory air gap of 15-25 mm is provided. To protect against conventional heat loss storage facilities or dachas, it is advisable to buy a thinner Izover, this is especially true when arranging suspended ceilings. An insulation thickness of 50 mm in this case will be quite sufficient.

Reviews from people

“I live in a cold region, for the arrangement of the sauna I chose Isover foil insulation with a thickness of 100 mm, laid mats on the floor, walls and ceiling. After the first year of operation, I disassembled the casing and checked the condition of the material; the shape and density had not changed.”

Pavel, Moscow.

“I advise you to purchase foil Izover for self-insulation of sauna walls based on my own experience, it can be cut into pieces without any problems the right size and is simply fixed to the sheathing with staples. It is worth placing a membrane on the ceiling under the insulation, then the bathhouse will be protected to the maximum. According to reviews, such cladding reduces heating costs by three times, but I cannot confirm this, since I did thermal insulation work immediately after the walls are built.”

Roman Startsev, Moscow region.

“I provide construction services To the population, I confidently recommend Izover insulation for saunas and baths. The material has many advantages: it is easy to cut and fix, the insulation characteristics are quite durable, the surface is well protected from steam and heat loss. In addition to the cost of the roll, the costs include the purchase of foil tape; I do not recommend leaving the joints open. The most problematic area is the ceiling of the steam room; it is important to ensure its maximum tightness and not forget about the ventilation vents.”

Alexey, Novosibirsk.

“For thermal insulation of the sauna, I bought rolls of Izover glass wool with a reflective layer, overall I was satisfied with the material. I attached the mats to the walls myself; there were no problems during installation and operation. Steam protection is reliable, heat loss is minimal. I think the only negative is the high cost, the price per roll was 1,500, 1 m2 cost 210 rubles, and this does not include adhesive tape and staples.”

Philip, Yekaterinburg.

Price

Although the bathhouse is quite warm design, one room in it needs insulation. We are talking about a steam room, in the walls and ceiling of which an isover sauna is installed. And this material does its job, leaving inside the warmth that is so necessary for this room. This is one of the main reasons for using Isover insulation for a bath.

Isover sauna insulation is a material of mineral origin. Consists of many fibers intertwined. Therefore, the weight of each fabric is quite small, which is achieved by the presence of air space between the thinnest threads. All together gives dense insulation that perfectly maintains the temperature inside the room..

Each canvas has a reflective screen in the form of foil. During the manufacturing process, the metallized component is firmly attached with mineral fibers.

A strong connection is achieved by baking non-woven fabric in special ovens. The foil screen does not peel off from the base even with prolonged exposure to high temperatures.

Does not affect the strength of the connection and the steam present in the given bathhouse.

Foil insulation is available in two versions:

  • 5 cm thick;
  • 10 cm thick.

The thickness of each layer of thermal insulation isover sauna 50 mm is quite enough to retain the warm air left inside the steam room. In this case, no material is required for installation. additional elements. Isover sauna 50 insulation is simply inserted between wooden blocks frame.

The canvas has a width of 120 cm, so before installation it should be cut into two equal parts. For this, a construction or stationery knife with a blade length of at least 100 mm is used. Halves 60 cm wide are necessary so that the frame of the walls or ceiling does not have large sagging. The distance between the bars in this case should be no more than 59 cm. The joints and the slats themselves should be sealed with special metallized tape.. Thus, the aluminum heat-reflecting screen will be solid and monolithic.

Cost of Izover for a bath

The cost of thermal insulation for an isover sauna directly depends on its thickness. But this is not the only factor influencing the price. of this product. Much depends on the company offering this product to the buyer. When comparing the performance of different sites, it is worth highlighting the following data:

  • foil insulation for isover baths 50 mm thick with a price from 1,658 rubles;
  • foil insulation for isover baths 100 mm thick with a price from 1850 rubles.

When purchasing thermal insulation, you should more carefully study the sellers' offers. This is important because the product may not be in the company's warehouses.

Reviews about Isover sauna insulation

Isover sauna quality products are enjoyed in great demand from builders and owners country houses. Many people share their impressions about this material. To finally make sure of the reliability of thermal insulation for baths, you should listen to customers.

I was very pleased with the thermal insulation of Isover for baths. There is no need to invent new methods of vapor barrier for walls and ceilings. Everything is convenient. The roll already contains both insulation and a reflective screen. Installs quickly and does not require additional investments in fasteners. The vapor permeability is amazing. The only disappointment is the price of the roll. I wish it was cheaper.

Zinaida. Naberezhnye Chelny

My husband and I built a bathhouse at our dacha. And we decided to try isover for a bath. I liked this foil thermal insulation because it is convenient to work with. My husband quickly insulated the ceiling and walls. Problems arose only with the joints. The adhesive tape came off the surface of the metal screen in several places, but they took another one and fixed everything. The thermal insulation itself serves faithfully. It is always warm in the steam room, and even in the bathhouse itself, no matter what the weather is outside.

Olga. Moscow

On the advice of friends, I decided to buy an isover when I built a bathhouse. I insulated the steam room so that it wouldn’t blow and you could steam in peace. I'm pleased with the result. He insulated everything quickly. The material is easy to work with. Flying fiberglass particles cause inconvenience. I do not recommend laying sheets without special gloves and a respirator. Otherwise, I have no complaints.

Sergey. Kostroma

In buildings such as baths and saunas, there is no constant heating, therefore, for thermal insulation of walls, floors and ceilings, it is recommended to use special material, which can not only provide effective heat and vapor protection, but also create an optimal indoor climate. For these purposes, the universal lightweight insulation Izover Sauna, which is available in compact rolls, is best suited. A modern thermal insulator is a fiberglass cotton sheet different thicknesses(50 and 100 mm), which is covered on one side with a mirror reflector (aluminum foil).

Characteristics

The width of the product is 1200 mm, while the length of the roll and the area completely depend on the thickness of the web:

  • in mats, the layer of which is 50 mm, roll length – 12,500 mm, area – 15 m2;
  • with a layer of 100 mm, roll – 6,250 mm, area – 7.5 m2.

Main properties and characteristics Isover insulation Sauna:

  • light weight;
  • compactness ( roll material highly compressed in volume);
  • quality guaranteed by the following standards: European EN 13162, international ISO 9001, Saint-Gobain group;
  • low vapor and thermal conductivity, perfect for wet rooms;
  • high sound insulation;
  • fire safety created by a non-combustible base (belongs to the category of low-flammable (G1));
  • environmentally friendly, ensuring complete safety for human health (mats do not emit any harmful substances);
  • hygiene;
  • resistance to rotting and microbial formation;
  • ease of transportation, storage and installation;
  • durability.

On modern Russian market the price of Izover Sauna 50 ranges from 1,550 to 2,000 rubles. Although the cost of this insulation is higher than similar materials from other manufacturers, it is justified by high technical indicators, quality, efficiency and a long period of operation. Insulation Sauna 100 mm provides reliable protection rooms in which heating is completely absent, and is also indispensable for regions with harsh climates. Thanks to excellent technical indicators and quality, sauna insulation with Izover rolls is the most optimal and effective option to date.

Fiberglass cotton mats have a low coefficient of thermal conductivity (0.041 W/m*K), so their presence significantly reduces the cost of energy resources such as firewood, coal, gas and electricity, which are used for heating. Numerous positive reviews about Isover Sauna, which can be read on the Internet, are the main confirmation of its effectiveness.


Thermal insulation of a sauna using Isover

Fiberglass mats are laid with a mirror layer towards the room. At the same time, between them and interior decoration There must be a space (air gap) of approximately 15-25 mm, which will ensure good air circulation and enhance the effect. The distance between the insulator and the interior trim is determined by the thickness of the spacer beam.

Correct laying of the Izover canvas is carried out between the sheathing guides, and the insulation is fastened using a construction stapler. Thermal insulation will meet all requirements only when the space between the sheathing guides is completely filled with mats. After all installation and fastening work is completed, the joints and seams are taped with special tape made of aluminum foil, thus ensuring tightness. Before you buy an Isover Sauna, you need to decide on the type of insulation, since sheets of different thicknesses are designed for different conditions operation. For example, the material with a layer of 50 mm is used for thermal insulation of warehouses, metal hangars, as well as in private housing construction: cottages, houses, dachas.

Imagine country holiday with friends in Russia and without a sauna or bathhouse is simply impossible. It's just an age-old tradition of taking a sauna to actually feel alive and enjoy "relaxation for body and soul."

But the presence of a sauna or steam bath requires looking after them, maintaining them and constantly monitoring the condition of the entire building. And it is very important that a bath or sauna is provided with thermal insulation, without which, no matter how strange it may sound, baths and saunas simply cannot function properly. We recommend starting with Izover products.

The insulation for saunas and baths from this company belongs to the “Isover Sauna” series, the installation of which is extremely simple and fast, and is the most effective among all insulating materials of this direction. Using the presented material, it’s quite simple to do it yourself.

1 Product Description

Simply put, the mats of the “Sauna” series allow you to “kill” two tasks with one shot: insulating a sauna or bathhouse, and making a vapor barrier in them.

It is thanks to this that the installation of this thermal insulation material doesn't take much time, but construction works associated with it are easy and without the need to involve specialists (although this is recommended). These are presented on the market in a wide range.

1.1 Advantages of insulation

The advantages of this thermal insulation material are presented as follows:

  • The material provides extremely reliable thermal protection due to the fact that it has a low thermal conductivity coefficient;
  • Serves as a good vapor barrier;
  • Quite well reduces the level of various noises in the room;
  • Belongs to the group of low-flammable and relatively safe materials (G1), manufactured on a non-flammable basis;
  • The material retains absolutely all its characteristics in its original form throughout its entire service life;
  • Great variability in the sizes of insulating mats (50 - 100 - 150 or more millimeters), the width can reach up to 12500x1200x50 mm;
  • The insulation of this series is absolutely safe for the health of both people and animals. Including the material is used even in places with serious hygienic and environmental requirements;
  • The material is easy to install and can be attached to structural components using a conventional stapler;
  • The insulation is easy to both deliver and store, due to its delivery in an initially compressed state;
  • Numerous positive reviews;
  • The quality of the goods is maintained in accordance with the prestigious European standard type"EN 13162".

2 Characteristics and properties

The insulation material of the “Sauna 50/100” series from the Isover company specifications look like this:

  • Thermal conductivity according to the constant 10 3 is approximately 0.041;
  • The material belongs to the “G1 NG” fire safety class;
  • The width of the material is in the range of 100 – 1200 millimeters;
  • Material length 12500x1200x50 mm;
  • The thickness of the material can be either 50 millimeters or 100 millimeters (standard indicators for thermal insulation materials);
  • The maximum temperature at which the material can operate is +200 degrees Celsius, but most optimal temperature is 100 degrees Celsius;
  • The weight of rolls of material is no more than 0.75 kilograms;
  • There is one thermal insulation mat per package.

Insulation ISOVER Sauna- This is fiberglass-based thermal insulation with a foil coating on one side. Polished for better durability aluminium foil secured with fine mesh. This reduces the risk of tearing the foil layer along or across. Sauna thermal insulation is available in the form of mats. It is used for insulation of walls, floors along joists and ceilings (floors) of rooms with high humidity. For its production, soda, sand, limestone and a small amount of a binder are used.

Isover Sauna provides reliable thermal protection of the room due to the foil coating. The foil reflects about 95% of the heat back into the room. 5% of the heat passing through it is retained by mineral glass wool. All Izover products have a low thermal conductivity coefficient - 0.041 W/mK, thanks to a large number voids with air between the fibers. Its density is 30 kg/m3.

The use of foil insulation solves two problems at once - insulation and vapor barrier, since the steam that settles on the surface of the foil in the form of condensation drains from it, due to which the glass wool is reliably protected from water. In addition to all this, the absence of the need to install a vapor barrier saves time and labor costs for the construction or repair of a bathhouse or sauna.

Positive characteristics of Izover mats:

  • ecologically safe material, both for humans and the environment;
  • have a long service life (subject to the installation and use rules);
  • non-flammable and frost-resistant;
  • are not interested in insects and rodents as a source of food;
  • resistant to alkalis and many acids;
  • do not shrink throughout the entire service life.

ISOVER insulation not only perfectly retains heat inside the sauna, but is also good sound insulation. Rolls are available in thicknesses of 5 and 10 cm, lengths of 12.5 and 6.25 m, and width of 1.2 m. One package can cover 15 or 7.5 m2. Thermal insulation Sauna from the Izover company has the first degree of flammability (G1), while its base is non-flammable. The destruction of the material begins after the temperature exceeds +400°C. Izover Sauna insulation is used only for insulating wooden surfaces.

Nuances of installing insulation

To install the mats, it is necessary to equip the frame. The recommended distance between the posts is 60 cm. The Izover thermal insulation roll is cut into 2 halves of 60 cm each. This method will ensure reliable fixation of the foil insulation without the use of additional fasteners. The rolls are installed between the racks in a spacer, so that the glass wool completely covers the entire space, without cracks or gaps. Recommended for cutting sharp knife with a blade at least 15 cm long.

Isover mats are installed with the foil side facing the inside of the room. All joints between the rolls are taped with aluminum tape. Thanks to it, moisture will not be able to penetrate into mineral wool. A ventilation gap of 1.5-2.5 cm must be left between the foil insulation and the interior finishing so that accumulated moisture can drain and erode rather than accumulate. To do this, it is necessary to equip a counter-lattice with beams 1.5-2.5 cm thick. Then proceed to attaching the finishing coating.

When working with insulation, you should use products personal protection. Dust generated by fiberglass insulation can cause harm to human health - skin irritation, respiratory tract and mucous membrane of the eyes.

Reviews of Izover products


“A couple of years ago we decided to buy a small a private house with a bathhouse. As it turned out, in order to heat it in winter, a lot of firewood is needed, since the beams have dried out and cracked. There are cracks and drafts everywhere, although we have sealed them most. We immediately realized that we needed to insulate it. Having listened to the reviews of friends, we decided to purchase an Izover Sauna, since this insulation has excellent quality, characteristics and completely affordable price. For our small bathhouse we only needed two rolls. I laid them strictly according to the instructions, cut them in half and placed them in a spacer in the frame. Installation of all mats went quickly and without problems. Now the bathhouse heats up 2 times faster.”

Egor, Ekaterinburg.

"I professional builder And this is not the first time I have used Izover insulation for saunas and baths. I can say exactly what it is quality material With good characteristics and density, and I always leave only positive reviews about it on websites. With proper and competent installation, it can last more than 30 years. The main thing is to ensure complete tightness of all joints using aluminum tape and create a ventilation gap for ventilation. Then the insulation will not deteriorate and the lining will not rot. Izover mats can be easily cut with a regular knife. By the way, when working with it, you must definitely use personal protective equipment, otherwise skin irritation and coughing are guaranteed.”

Alexander, St. Petersburg.

“Reading reviews about the effect of the ISOVER Sauna foil thermal insulation layer, I didn’t fully believe that it could give such a great result. But since my bathhouse needed repairs, I decided to check it out. I bought 100 mm thick thermal insulation, since in our winter it often falls below -30°C. I hired specialists for installation, since I simply don’t have time to do it. I was surprised how quickly all the work was done. It turns out that the rolls do not need to be secured with anything; they are simply inserted into the frame. Already in the first fire of the bath I noticed the result. It heated up faster than before, and the steam lasted a long time.”

Maxim, Nizhny Novgorod.

“We insulated the floor, walls and ceiling in the bathhouse with a sauna. We chose this particular insulation because it is both affordable and positive feedback a lot about him. We carried out all the installation work ourselves, since we already have similar experience. Glass wool is elastic, with good density. After unpacking I quickly straightened it out. The mats are easy to insert into the frame. It is convenient that they do not need to be secured with anything, since they themselves sit tightly and securely in the frame. Now to heat up comfortable temperature it takes much less fuel and time. We are very pleased with the result, we don’t regret the effort spent at all.”

Marina, Moscow region.

Price

Table with prices per roll at which you can buy Sauna thermal insulation from the Izover company:

For convenient transportation, the thermal insulation of the Sauna from the Isover company is compressed 3 times in the packaging. After unpacking, glass wool acquires its original structure within a few minutes due to the elasticity of the material. It can only be transported in covered transport so that it is not exposed to precipitation and dirt. Insulation from the Izover company provides reliable thermal insulation of any room and reduces heating costs. Isover has two eco-labels, including foil insulation.