You will need bottles different sizes- 2l, 1l and 0.5l. Cut with scissors or sharp knife The bottom of each bottle is 3-4 centimeters high. Then, in the center of each resulting “saucer”, drill a hole corresponding to a pre-prepared threaded rod.

It is better to place the saucers on the rod between two washers and two nuts. If you simply use a metal pin, a wooden knitting needle or something like that as a rod, then the saucers can be mounted on hot glue.

The bottom of a 2-liter bottle will act as the base of the stand, so simply turn the saucer over to stabilize the entire structure.

2. Boxes for pastries and cakes made from plastic bottles.

Cakes and cupcakes tend to get stale, and it can be difficult to bring such beauty to guests safe and sound. Not scary! Make these crafts from plastic bottles do it yourself - boxes for sweets. A cardboard circle and half a bottle make a box for one cake, and two halves of a bottle can hold delicious macarons!

3. Small box - a case made from plastic bottles with your own hands.

Cut from two liter bottles bottoms 5 - 7 cm high. C inside hand sew on a small zipper.

4. DIY organizers and stands made from plastic bottles

Plastic bottles provide enormous opportunities for organizing your workplace. From bottles you can make a variety of organizers for magazines and correspondence, tools and sewing accessories, stands for stationery and cosmetics, boxes - baskets for toys and other small things. We simply cut off the neck of the bottles, and then - at your discretion. Some simple options Below will give you ideas.

5. DIY curtains made from plastic bottles.

Unusual DIY crafts made from plastic bottles - curtains or light partitions for zoning space. Such curtains look like floating transparent flowers, shimmering in sun rays. Interesting decor not only the interior of the house, but also the veranda or terrace at the dacha. A detailed master class with photographs can be viewed.

DIY crafts from plastic bottles for the garden and cottage.

1. DIY bird feeders and drinkers.

You won’t surprise anyone with such a craft made from bottles. In the surrounding parks and forests, as well as on balconies, you can see various feeders made from bottles and milk cartons everywhere, especially in winter time. But perhaps you will still be interested in taking a look at what other feeders you can build with your own hands from plastic.

2. Vertical garden on the wall

Empty concrete walls houses, garages or fences are just begging to be decorated. It would be a good idea to create a vertical garden made of plastic bottles with your own hands on bare lifeless walls!

You will need a couple dozen two-liter plastic bottles, scissors, rope (twine or wire) and two washers per bottle. The process is shown schematically in the figure:

For drainage, you can make a couple of holes in the bottom of a container - a bottle, and place small pebbles, sand or a special filler in front of the soil. And in such hanging gardens you can grow a whole garden: herbs, spices, flowers, berries and medicinal plants!

3. Caps for seedlings.

Half a plastic bottle makes excellent seedling caps that will protect young sprouts from wind and bad weather.

4. Boat made from plastic bottles.

An extraordinary invention is a boat made of plastic bottles, which is practically in no way inferior to a factory model made of wood or rubber. If you have a desire to acquire such a boat almost free of charge in order to plow the nearby lake or river, you will find a master class.

5. DIY flower beds made from plastic bottles

To decorate the garden and fence off flower beds or beds, you can use halves of plastic bottles. Moreover, seedlings can grow under the bottles. Such garden crafts from plastic crafts Even children can do it with their own hands.

6. The nozzle for the hose is a waterer made from a plastic bottle.

Beautiful garden idea for soft watering of plants in the garden. Take a plastic bottle and make many small holes in it. Then place the bottle on wheels, such as those from an old cart, toy stroller, or roller skates. Attach a hose to the neck and turn on the water. Small jets from the holes will water the plants like rain, and the wheels will allow the watering attachment to be mobile.

Can human waste in the form of plastic bottles become interesting project for home and garden? How can they! American designer Garth Britzman created an unusual canopy made of plastic bottles with his own hands for parking cars.

Such a canopy made of plastic bottles provides shade, which is important for preventing the car from heating up, but it will not save you from rain. In addition, the canopy below looks bright thanks to the tinted water at the bottom of the bottles.

How to make a canopy from plastic bottles with your own hands?

1. Build as a base for the canopy wooden frame of four vertical bars and horizontal crossbars.
2. Stretch a mesh, fabric or wire, over the crossbars - we will hang bottles on the stack.
3. Prepare plastic bottles with caps. In this canopy project, 1500 liter bottles of various drinks were used. Remove labels and wash bottles.
4. Think it over color scheme your canopy. This could be a specific pattern, image (smile, sun, symbol) or simply an abstract pattern, a gradient transition of shades, and so on. It is not easy to imagine the whole picture. However, based on the desired result, start filling the bottles with colored water. You can pour water to the very bottom. You can color water with either food coloring or water-soluble paints.
5. Make two holes in the middle of each lid and tie a strong thin rope or fishing line. You can punch one hole at a time, thread a rope and tie a large knot on the back of the lid.
6. Screw the caps with the rope onto the bottles and begin hanging them by the mesh according to the diagram. Bottles can also be hung on different heights, this will give the canopy volume. Bottles can be glued together. Then the canopy made of plastic bottles will not be so blown around by the wind and get tangled in the threads.

7 ways to use plastic bottles in the garden

1. Make a plant watering system

Majority garden plants you need to water at the roots, especially if you combine watering with fertilization. A plastic bottle can be turned into a drip irrigation system that can deliver moisture and nutrition directly to the roots of plants over a long period of time. Make several small holes along the entire length of the bottle with any convenient tool. Bury at the same time as planting the seedlings. Water from the bottle will slowly flow to the roots. This simple device solves the problem of withered leaves and prevents fungi and mold from developing.

This system can be used in open ground and in flower pots, slightly changing the design. Cut the bottom of the bottle so that the neck buried in the ground does not reach the bottom. Fill the reservoir with water if you leave the plants without watering for a long time. From the bottle, water will slowly seep into the ground and nourish the flowers.

2. Make flower pots

Old bottles and containers will act as a mold for pouring homemade flower pots. Take plastic bottles of an interesting shape and cut off the top. Prepare cement mortar and fill the molds about a third full. Then insert another smaller plastic container inside to create a bowl. The next day, the inner inserts can be removed to make a drainage hole in the bottom (using a drill or any convenient tool). After another couple of days, you can remove the outer plastic shell.

3. Make a system for growing seedlings

It’s not enough to just pour soil into a jar and stick the seeds in there. They still need to be germinated. For everything to sprout, make drainage holes in plastic jars, fill the containers with soil and plant the seeds. Place the jars on a tray covered with small stones or pebbles. Close cling film to make a mini greenhouse. The high-speed system for seedlings is ready.

4. Make a self-watering system for seedlings

The methods of growing seedlings can be improved and a structure can be made from plastic bottles that will save you from the need for watering. Cut the bottle in half. Punch a hole in the lid. Take a thin cord 25 cm long, fold it in half, tie a knot approximately in the middle to form a loop on one side. Thread the loose ends of the string through the hole in the lid and close it. Place the top of the bottle, cap down, into the bottom part. Fill with water so that the ends of the rope are immersed in it. Lay the soil, plant the seeds, water the plants to saturate the soil with water. Ready!

5. Grow onions in a plastic bottle

Create a versatile vertical bed for fresh herbs. Cut off the neck of a large plastic bottle and make holes in the body (not too low). Fill the soil up to the first hole, cover them with bulbs inserted with roots inside the bottle. Continue filling the soil. Fill the entire container and place it on a tray. Don't forget to water and harvest fresh greens.

6. Make a wasp trap

Find vespiary in the garden or on suburban area It can be difficult, and clouds of insects interfere with work and rest. Make out unnecessary bottles traps. Cut off top part bottle, place it neck down in the second part (without a cap). Pour some honey into the bottom. The wasps will be able to descend, but not get out.

7. Make another irrigation system

It's simple. As children, we splashed water by punching several holes in the bottle cap. If you make holes in the bottle itself and attach it to the hose, you will get a watering can with a wide range of action.

Useful tips

7. Lift the fabric and thread the string through it.

Master class from plastic bottles. Mobile phone holder.

You can also make a good and very useful holder from a plastic bottle. mobile phone. You need it when you urgently need to charge your phone, you find an outlet, but there is nowhere to put the phone.

Prepare a 0.5 liter plastic bottle and pierce a hole with a knife to further cut off the unnecessary part of the bottle.

Using scissors or a utility knife, cut out a circle for the fork.

All that remains is to insert the cord from the charger and plug into the outlet.

Master class from a plastic bottle. Chandelier.

You will need:

50 plastic bottles (volume 0.5 l)

Flower wire

Regular wire

Bulb

Spray paint

Glue (preferably a glue gun)

Scissors

Stationery knife

1. Prepare plastic bottles and remove labels from them.

2. Cut each bottle into the shape of a flower (see picture). To do this, use a stationery knife.

3. Spread the "petals" of the flowers.

4. Once you've completed steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint or you can take a little more time and paint each flower acrylic paints. You can choose any color. You can also vary the colors by making some flowers one color and others another.

5. Make a circle out of regular wire. Wrap the jute and use a glue gun to glue it to the wire. You will have the base of the chandelier to which the flowers will be attached.

6. Using floral wire, attach each flower to the circle you made from the wire.

There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.

This is what the first layer looks like.

7. Repeat all steps to make several layers. IN in this example 3 layers were done.

8. Use jute to attach the chandelier to the ceiling (see picture).

What you can do from plastic bottles. Waterer.

Simply make holes in the cap of a plastic bottle with an awl or nail.

Products made from plastic bottles. Funnel.

Plastic products from bottles. Money box.

1. Prepare a plastic bottle. Rinse it off hot water with soap and leave to dry.

2. From colored cardboard, cut out details such as ears, eyes, snout and nostrils.

3. Use glue or double tape to attach all the parts.

4. Wrap the bottle with patterned paper.

5. For the legs, you can use empty spools that need to be glued to the bottle.

6. Make a cut at the top for coins.

We make a dispenser for plastic bags from a plastic bottle

You will only need one 3-liter plastic bottle in which to store your plastic bags.

Simply cut off the bottom of the bottle so you can slide the bags in, and the neck so you can carefully remove one bag at a time.

You can use sandpaper to make the edges of the bottle more even and smooth.

Making bracelets from plastic bottles

You will need:

Plastic bottle

Adhesive tape (the width of the bracelet depends on the width of the tape)

Double-sided tape

Felt (or other material)

Scissors

Stationery knife

Decorations

1. First, wrap some adhesive tape around the bottle. Make several "rings" as shown in the picture. Everything needs to be done carefully and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.

2. Using a utility knife, carefully cut off each ring.

3. Carefully remove the adhesive tape.

4. Glue double-sided tape to the resulting plastic bracelet.

Useful tips

Plastic products are used everywhere because they require less investment to create than products made from other materials.

However, discarded plastic can take hundreds or even thousands of years to decompose, so it is important to recycle it or avoid plastic altogether.

The second option is very difficult to implement today, so recycling comes to the fore. Plastic can be sent to special factories for recycling it, or you can make useful things out of it.

In this collection you will learn how to make various useful things for your home and garden from plastic bottles.

1. DIY ottoman made from plastic bottles step by step

You will need:

Plastic bottles

Foam rubber

Knitting needles

Ruler

Scissors

Sewing machine

1. Wash and dry several plastic bottles covered with caps. Gather all the bottles in a circle and secure them together with tape.

2. Cut two circles from cardboard to cover the top and bottom of all connected bottles. Tape these circles to the connected bottles.

3. Prepare two rectangular pieces of foam rubber and one round piece. Rectangular pieces should be used to cover the side of the collected bottles, and a round piece should be used to cover the top part. Secure everything with tape.

4. Make a cover for your seat from any fabric. If you like to knit, you can knit a cover.

2. We make a faucet extension from plastic bottles with our own hands

It will be more convenient for children to wash their hands.

3. DIY products made from plastic bottles: pocket for a rag/sponge

1. Cut the bottle into the desired shape.

2. Sand the edges with sandpaper.

3. Hang on the faucet.

4. How to make a bag from plastic bottles

Photo instructions

Video instruction

5. What can be made from plastic bottles: cups for storing cosmetics

6. Feeder made of plastic bottles for a cat or dog

There are many ways to make bird feeders, but this one is designed for cats and dogs.

You will need:

2 large plastic bottles

Scissors

1. In the middle of one bottle you need to make holes slightly larger than the neck of the other bottle.

2. The second bottle needs to be cut in half crosswise.

3. Fill the bottom with food.

4. Connect the parts and open the lid.

7. Vase for sweets: master class on crafts from plastic bottles

You will need:

Plate, round plastic or thick cardboard

6 two-liter plastic bottles

Wooden or plastic rod (you can use a straight branch of suitable diameter and length)

Super glue

Spray paint and glitter (optional)

1. Making the base for the craft. To do this you need a plate, ceramic or glass plate. In the middle of the plate you need to enlarge the hole to 10 mm using a drill.

2. You will also need to use a drill to make holes in the center of the three plastic bottle pieces you will be using. It's easier to drill from the inside out.

3. Cut off the bottom of each of the 6 plastic bottles. Place 3 parts on the rod and secure with glue. Glue the remaining parts to the base (plate) around the rod. If you wish, you can spray paint everything.

It is worth noting that the rod is held on the base thanks to a plastic part that is glued to the plate, as well as to the rod itself.

4. If you wish, you can decorate your vase.

8. DIY wicker baskets from plastic bottles (master class)

And here is a version of a wicker basket made from plastic cocktail tubes:

9. Garden crafts made from plastic bottles (photo): broom

1. Remove the label from the plastic bottle.

2. Using a utility knife, cut off the bottom of the bottle.

3. Start making cuts on the bottle, leaving 1 cm between each.

4. Cut off the neck of the bottle.

5. Repeat steps 1-4 with 3 more bottles. Leave one bottle with a neck.

6. Place all the cut neckless bottles on top of one necked bottle. You will have a blank for a broom.

7. Cut off the top of one bottle and place it over the resulting blank.

8. Make two holes through all the bottles and insert wire into them and wrap the ends.

9. Insert a stick or rod into the neck and secure with a nail. You can also use glue.

Video instruction

10. Modular boxes: description of crafts made from plastic bottles

You will need:

Several large plastic bottles or canisters

Stationery knife

Scissors

Marker or pencil

Strong thread.

1. Cut a suitable hole from a bottle or canister using a utility knife and/or scissors. It should not be too small for everything to fit, or too large for the plastic structure to fall apart.

2. Start connecting the bottles with a strong thread. Start with two, then add two more already connected to them, and so on. Tie strong knots. You can also try using hot glue or superglue (Moment glue).

3. Assemble a design that is convenient for you. You decide how many rows and “floors” to make. However, it is worth knowing that the higher the structure, the less stable it is. You may need to secure the entire structure with rope again.

4. It's time to put scattered things on the shelf.

June 15th, 2017

Plastic products are used everywhere because they require less investment to create than products made from other materials. However, discarded plastic can take hundreds or even thousands of years to decompose, so it is important to recycle it or avoid plastic altogether.

The second option is very difficult to implement today, so recycling comes to the fore. Plastic can be sent to special factories for recycling it, or you can make useful things out of it. In this collection you will learn how to make various useful things for your home and garden from plastic bottles.

1. DIY ottoman made from plastic bottles step by step

You will need:

Plastic bottles

Foam rubber

Knitting needles

Ruler

Scissors

Sewing machine

1. Wash and dry several plastic bottles covered with caps. Gather all the bottles in a circle and secure them together with tape.

2. Cut two circles from cardboard to cover the top and bottom of all connected bottles. Tape these circles to the connected bottles.

3. Prepare two rectangular pieces of foam rubber and one round piece. Rectangular pieces should be used to cover the side of the collected bottles, and a round piece should be used to cover the top part. Secure everything with tape.

4. Make a cover for your seat from any fabric. If you like to knit, you can knit a cover.

2. We make a faucet extension from plastic bottles with our own hands

It will be more convenient for children to wash their hands.

3. DIY products made from plastic bottles: pocket for a rag/sponge

1. Cut the bottle into the desired shape.

2. Sand the edges with sandpaper.

3. Hang on the faucet.

4. How to make a bag from plastic bottles

Photo instructions

Video instruction

5. What can be made from plastic bottles: cups for storing cosmetics

6. Feeder made of plastic bottles for a cat or dog

There are many ways to make bird feeders, but this one is designed for cats and dogs.

You will need:

2 large plastic bottles

Scissors

1. In the middle of one bottle you need to make holes slightly larger than the neck of the other bottle.

2. The second bottle needs to be cut in half crosswise.

3. Fill the bottom with food.

4. Connect the parts and open the lid.

7. Vase for sweets: master class on crafts from plastic bottles

You will need:

Plate, round plastic or thick cardboard

6 two-liter plastic bottles

Wooden or plastic rod (you can use a straight branch of suitable diameter and length)

Super glue

Spray paint and glitter (optional)

1. Making the base for the craft. To do this you need a plate, ceramic or glass plate. In the middle of the plate you need to enlarge the hole to 10 mm using a drill.

2. You will also need to use a drill to make holes in the center of the three plastic bottle pieces you will be using. It's easier to drill from the inside out.

3. Cut off the bottom of each of the 6 plastic bottles. Place 3 parts on the rod and secure with glue. Glue the remaining parts to the base (plate) around the rod. If you wish, you can spray paint everything.

It is worth noting that the rod is held on the base thanks to a plastic part that is glued to the plate, as well as to the rod itself.

4. If you wish, you can decorate your vase.

8. DIY wicker baskets from plastic bottles (master class)

And here is a version of a wicker basket made from plastic cocktail tubes:

9. Garden crafts made from plastic bottles (photo): broom

1. Remove the label from the plastic bottle.

2. Using a utility knife, cut off the bottom of the bottle.

3. Start making cuts on the bottle, leaving 1 cm between each.

4. Cut off the neck of the bottle.

5. Repeat steps 1-4 with 3 more bottles. Leave one bottle with a neck.

6. Place all the cut neckless bottles on top of one necked bottle. You will have a blank for a broom.

7. Cut off the top of one bottle and place it over the resulting blank.

8. Make two holes through all the bottles and insert wire into them and wrap the ends.

9. Insert a stick or rod into the neck and secure with a nail. You can also use glue.

Video instruction

10. Modular boxes: description of crafts made from plastic bottles

You will need:

Several large plastic bottles or canisters

Stationery knife

Scissors

Marker or pencil

Strong thread.

1. Cut a suitable hole from a bottle or canister using a utility knife and/or scissors. It should not be too small for everything to fit, or too large for the plastic structure to fall apart.

2. Start connecting the bottles with a strong thread. Start with two, then add two more already connected to them, and so on. Tie strong knots. You can also try using hot glue or superglue (Moment glue).

3. Assemble a design that is convenient for you. You decide how many rows and “floors” to make. However, it is worth knowing that the higher the structure, the less stable it is. You may need to secure the entire structure with rope again.

4. It's time to put scattered things on the shelf.

11. DIY house made from plastic bottles (video)

12. How to make a house/greenhouse from plastic bottles with your own hands

1. Remove labels and wash bottles.

2. Cut off the bottom of each bottle and unscrew the caps.

3. Place the bottles on a long, straight branch, stick or rod.

4. Make a wooden frame for the house (greenhouse).

5. Repeat steps 1-3, making required amount rods with bottles. After this, all the rods need to be attached to the frame of the house.

*Alternatively, you can simply connect using wire required quantity bottles and attach the bottles collected in a row to the frame of the house. In this case, there is no need for a rod and no need to remove the caps from the bottles.

* The greenhouse can be made more airtight by covering it with bubble wrap.

Video instruction

Surely the inventors of plastic bottles had no idea how widely people would use them. Today, craftsmen have learned to make a huge number of useful things from plastic bottles with their own hands, from toys to a boat or a house. We will limit ourselves to considering crafts that will help you beautifully decorate your plot, garden or vegetable garden.

Unusual qualities of homemade products from plastic bottles

Plastic bottles are extremely popular among those who like to create garden crafts. The explanation for this is simple: on the one hand, the material is easily accessible, on the other hand, it is easy to work with. It’s no wonder that among the fans of the “genre” there are a huge number of women.

Note that plastic containers take an extremely long time to decompose like garbage, but they serve endlessly in the rain and sun in the yard. It's nice to make something fun and useful out of something that was supposed to be thrown away. The presence of numerous interesting examples further provokes creative and inventive souls to create something better and different.

Plastic bottles come in many colors; crafts made from them can be painted and enriched with a variety of decorative elements, which most often are also improvised materials. The use of both small and large empty bottles with a volume of 0.5 to 5 liters allows you to create the most different combinations figures. The author of the text sets himself the task of offering you the most interesting examples and familiarize yourself with the techniques of working with plastic bottles yourself using the example of several descriptions. Thus, you can both choose interesting and beautiful homemade products to repeat, and learn how to implement your own ideas.

Please note: it is very important to choose a place for the figurine in the garden where it will harmoniously fit into the surrounding environment.

Bright crafts and decorations made from bottles in the yard

The most bright decoration there are flowers in the yard. From plastic containers they turn out wonderfully and a considerable number of examples have already been invented. Do you want to build your own bottle tree? It's possible!

Probably the easiest crafts to make from plastic bottles are mushrooms. Making mushrooms with your own hands is extremely simple and very similar to real ones. The mushroom cap is the bottom of the bottle, its stem is the top of the container. They should be colored as you wish. It is most convenient to fasten both parts with a self-tapping screw.

To get the characteristic protrusions on the fly agaric leg, you can use two bottle necks to make it. Weed can be created from the side of a green container.

The blue lake in the yard is most realistically made from plastic bottles. Its surface, even in the absence of wind, is covered with characteristic ripples. Making such a pond is as easy as shelling pears. You need to paint at least 100 bottles with blue paint from the inside, and then bury them in the ground, neck down. Flowers and

Funny figures of animals and people for the garden from plastic containers

We all enjoy decorating our garden with crafts from animals, gnomes and people. A considerable number of different figures for the site have already been invented. Interestingly, even when copied, every creative invention has features introduced by the author. Nothing prevents you from leaving “your own mark on history” by inventing an original gnome.

All sorts of different animals in the yard and garden

Here are several options for turtle designs. All of them are made from the bottom of a bottle, which resembles an amphibian shell. Using paints and other decorative elements, you can create a turtle with its own face.

A caterpillar in a garden is quite appropriate. In this design, it will not turn into a butterfly, but it will not be able to harm either. You can make an insect from the bottoms, lids and bodies of plastic containers. The easiest way is to assemble the top parts of the bright green bottles in sequence. There may be a wire inside that is bent on both sides of the figure.

Funny gnomes for your yard can be made from a variety of containers. Perhaps you can’t do without the use of paints here. Decor occupies a special place in the design of gnomes: give free rein to your imagination and try to use everything that comes your way. This is exactly the case when you can compose something unusual and your own.

The land has not been plowed with the help of horses in the country for a long time, but the presence of their figures is appropriate and welcome. The horse's body is most often made from five-liter eggplants, and the legs, neck and muzzle are made from smaller containers. A horse is very similar to a donkey, so when making it, you can use the donkey assembly instructions that follow.

Pigs in the country made from plastic bottles are a classic of the genre. Of course, a 5-liter container is best for making a well-fed pig. It is often used as a flowerpot. The techniques for assembling the pig are exactly the same as for the donkey. A description of this follows.

A bright spot on the site will be a figurine of a fox or a bear, covered with orange paint. We already realized that big five liter bottles Well suited for both the already mentioned and other animal crafts. Here again, imagination and scenery are required. Assembly is the same as the donkey making guide that follows below.

We can say with complete confidence that you can build any animal from plastic bottles. Choose a sample to your liking and create!

Here are a few more examples of using plastic containers to make animals. Frogs, hares, bears and sheep - everything is like in a real forest.

Hunting trophy from a plastic container

If you are unable to hunt even with a camera, you can hang a hunting trophy from a plastic canister in your dacha house. In addition to the container for making a horned head, you will additionally need about 30 multi-colored corks, a piece of wire with a diameter of 3 mm and self-tapping screws.

Instructions for assembling a hunting trophy:

Funny donkey made from plastic bottles for your garden

As the pictures suggest, donkeys are a little different. I came up with my own collective image and prepared a master class for you:

1. To assemble the craft, we prepared 8 bottles. Subsequently, another one was needed, Brown, for making an animal's mane.
2. The neck of a 5-liter eggplant was cut off and the bottle caps for the feet were screwed on with self-tapping screws. Driving the screws into different places, you can adjust the tilt of the plugs. It is necessary to use at least three screws to secure one cover.
   
   
3. Cut off the neck of the head container.
4. Cut out the blank for the donkey's neck from the middle part of the bottle. In side view it has the shape of a trapezoid. On the sides of the part we leave two protrusions for which the neck will be attached.
5. We fasten the neck to the head with two self-tapping screws. They will be inside the torso.
6. We bend the neck to the head and fasten the parts with another screw.
   
   
7. Now we attach the neck to the body with two self-tapping screws. They will be inside the torso.
8. We turn the neck towards the body and fasten it with two more screws from below.
   
   
9. This is what the donkey frame looks like at this stage.
10. Cut out ear blanks from a green bottle. For one ear you will need a quarter of a bottle cut lengthwise. At the bottom of the ear we cut protrusions for attaching to the head, in accordance with the image.
11. We bend the sides of the protrusions so that they fit into the narrow slots prepared in the head.
    
    
12. We mark the slots on the head with a marker in accordance with the size of the ear. Their size should correspond to the width of the protrusions on the ear with curved edges. We make the slots.
13. We insert the ear protrusions into the slots on the donkey's head. After installation, the bent parts will straighten and securely hold the ear on the body of the animal’s head.
    
    
14. This is what our ward looks like with ears. Paint it with gray paint and leave it to dry overnight.
15. Cooking donkey mane from a brown bottle. The length of the workpiece corresponds to the length of the neck. To attach the part to the neck, cut out three protrusions in accordance with the image. We imitate hair by cutting through the part with a step of 2mm and not reaching its edge by 15mm.
16. We bend the edges of the protrusions for subsequent fixation to the neck. We make two blanks for the mane.
    
    
17. On the neck we mark three slots with a marker in accordance with the location of the protrusions on the parts of the mane. Their width should correspond to the size of the protrusions on the parts of the mane with curved edges. We make slits.
18. We bend the edges of the protrusions on the parts of the mane and sequentially insert them into the slots on the animal’s neck.
    
    
19. It is convenient to make the donkey's harness and tail from garden border tape. It is necessary to cut a 15mm wide strip from it and attach it to the body of the craft with five self-tapping screws. Eyes will suit old toy. We attach them using double-sided tape. We paint the inside of the muzzle and ears with white paint. We paint the nostrils and mouth with red and black paints.
    
    
20. You can harness it! We use a plastic box as a cart. The wheels are good from a used children's toy. They can be mounted on axles made of welding electrodes. We make shafts from thin branches. For good stability in windy weather, sand should be poured into the bottles of the donkey's legs.

Do-it-yourself products will definitely come in handy on the farm

Our articles about useful homemade products for your own yard from plastic bottles

You can read that or in our articles. Here is a list of several more articles about useful garden products:

Interesting examples of creations from containers for household purposes

As you can see, quite monumental structures can be built from plastic bottles. However, many of us, having assessed the scale of the work and a large number of bottles, ready to say the words from the old joke: “I won’t drink that much.” It’s up to you to decide which homemade products are good, but we offer a master class on how to make a prosaic broom from plastic bottles with your own hands.

Step by step guide to the sequence of actions:

When assembling the craft, we set the goal of using fewer bottles and getting a panicle of sufficient rigidity. However, it turned out to be not wide enough. To solve this problem, you should use the entire length of the bottle for blanks.

In this case, you will need twice as much container. In this option, to ensure sufficient rigidity of the broom, it will have to be tied with twine, as in the photo.

Along with the broom, we made a dustpan from plastic container. To implement this idea, it is better to use a thick plastic canister. We cut out the part according to the image, place it on a wooden handle and get a scoop. The scoop does not dig the ground, but it is suitable for sand and cement and works in tandem with our broom!