Homemade products for cleaning and caring for wooden furniture. How to clean wooden furniture at home How to clean wooden furniture

Following these simple but useful tips, you can say goodbye to water, ink, and polish stains on your wood furniture.

Deep cleaning polishing

You can regularly dust your wood furniture and buff it until it shines, but over time, the polish and dust combine to form a dark film on tables, chairs and shelves. To make your furniture look the best way, it is necessary to carry out from time to time deep cleaning. Now we will tell you how, while maintaining the finish, you can make wooden furniture look “like new.”

Start by dusting to remove surface dirt. Now you are ready to remove light stains. Start with the mildest cleaner and use stronger ones if necessary. Try mixing weak solution water and soap for washing dishes. Dip a soft cloth into it, wring it out and wipe the piece of furniture. The fabric must be damp, not wet. Do not soak the wood too much in the solution, so rinse the piece of cloth you use frequently. Take a second, clean cloth and wipe the furniture dry.

Now you know how to clean wooden furniture, stained or otherwise dirty.

Removing old polish

Knowing how to clean old wood flooring with years of accumulated polish will help you restore antique furniture. Place two tea bags in boiling water. Let the tea cool until room temperature, take a soft cloth, dip it in tea to make it damp, and wipe wooden surface. The tannins found in tea are great for preserving appearance wood You will be surprised at how shiny it will be.

Removing Water Stains

We offer you a way to remove water rings from a wooden surface, for example, after someone has placed a hot or cold drink directly on the table. Place a small amount of non-gel toothpaste on the stained area and rub soft cloth until the stain is removed. To remove more stubborn stains, mix in equal proportions baking soda and toothpaste. After this, remove the toothpaste from the surface using a clean damp cloth and dry thoroughly.

Elimination of complex contaminants

To remove, for example, ink marks, mix 1 tablespoon baking soda and 1 teaspoon water to make a thin paste. Apply it to the stain and begin to gently rub the stain with a soft cloth until it disappears. Then wipe the surface with a clean damp cloth and dry thoroughly.
Once your furniture is clean, give it a coat of wood polish to maintain the finish and add shine. You can also use commercially prepared lemon oil. You can also make your own simple polishing solution by mixing 1 cup olive oil and 1/4 cup white vinegar. Pour the resulting liquid onto a soft piece of cloth and rub into the wood.

Wooden furniture needs regular care. This is no secret to anyone, but it should be understood that wooden furniture is extremely sensitive to the effects of various chemical and organic substances, and therefore requires a delicate and careful attitude. In this article we will tell you how to competently eliminate defects that have arisen and maintain furniture in perfect condition for many years.

Wooden furniture, due to its exquisite texture and aesthetic characteristics, requires special care. And if the furniture frame itself can be preserved for decades, then the lack of proper care significantly conceals the luxury of its appearance.

Caring for furniture requires not only attention, but also special knowledge. Obviously, you need to turn to specialists for restoration work, but some tips will help you keep your furniture looking attractive.

Furniture surface care

It is absolutely not enough to simply wipe dust from the surface of the furniture and protect the surfaces from direct contact with sun rays. But it is also unacceptable to use care products excessively, since in the end you can get completely unexpected and not the most pleasant results.

There is an opinion that it is necessary to frequently use furniture polish. But this is an erroneous statement. As a result of frequent use of polish, the pattern of the wood is obscured and the unique character of the texture is lost. The polish is used occasionally and only after thorough cleaning to refresh the wood and give it a noble matte shine.

Polished surfaces

Polishing on wood can be refreshed with olive oil, to which lemon juice or wine vinegar has been added in a 1:2 ratio of oil and acid. For example, you can take 1 tablespoon of oil and 2 tablespoons of vinegar. It is better not to apply the mixture directly to a cloth, but to spray it. Use a velvet or flannel cloth or cotton pad to wipe the surface of the furniture. Vinegar cleans wooden furniture from dirt, and oil prevents the surface from drying out and creates a uniform, noble shine.

Polished furniture surfaces should not be wiped with a damp cloth at all. They lose their shine, and over time, unsightly abrasions form on protruding raised areas. For preventive purposes, wipe the polished surface with a woolen cloth slightly moistened in burdock oil. Experts say that with proper care, polishing will not lose its properties even after a hundred years have passed from the date of manufacture of the furniture.

If there is a need to wipe the furniture with water or wipe off spilled liquid from the table, you need to add ammonia to the washing water in a proportion of 1 part alcohol to six parts water. It is not recommended to wipe varnished surfaces with water only.

Care of lacquered furniture. You should not use soap solutions to wash it, as this can ruin the varnish. The best remedy For cleaning, water with a small amount of ammonia is considered (to 6 parts of water you need to take 1 part of alcohol). It is not recommended to wipe furniture with water only.

Scratches on furniture

If your wooden furniture is scratched by a sharp object and the scratch is clearly visible, you can remove it using crushed colored pencil leads or children's crayons. Select the desired color, apply strokes across the scratch, blend with cardboard and wipe off excess with the edge of a plastic card or hard cardboard. To give uniformity, wipe the area of ​​the shaded scratch with lemon oil or add a drop of furniture gloss. Today furniture stores offer a large assortment furniture grout. This option is more reliable, although sometimes it is quite difficult to choose the right color.

In general, lemon oil is an ideal product for polishing furniture; in addition, it acts as a natural antiseptic and has a pleasant aroma.

Scratches can be filled with shoe polish of a suitable color. After the cream has dried, polish the area with furniture shine.

Scratches can also be eliminated using mastic specially designed for this purpose. The mastic is dissolved over low heat (4 parts wax in 3 parts turpentine), then the mixture is stirred well, pour in 2 parts alcohol, stir well again. Before applying the mastic, wipe the area where the mastic is applied with a woolen cloth soaked in aviation gasoline. Then mastic is applied with a cotton swab and rubbed again with a woolen cloth. Prepared mastic can be stored for a long time in a glass jar with a tight screw-on lid.

Stains on polished furniture

You can try removing stains from polished furniture with dried tea leaves wrapped in a bag. For these purposes, you need to take large-leaf tea leaves, and not disused tea bags.

Protecting furniture from indoor humidity

You can protect furniture from dampness using wax paper. Rear walls cabinets and sideboards must be covered with wax paper, which absorbs moisture well from the air and prevents the walls of the furniture from drying out.

Caring for oak furniture

Noble and expensive oak wood, alas, is not particularly well protected from aggressive influences. Particularly noticeable on the surface of oak furniture greasy spots. They should be cleaned with warm beer. The beer mixture must be prepared in advance. Boil a glass of beer with 1 tablespoon of powdered sugar or well-dissolved granulated sugar and 20 grams of wax. For these purposes, you can buy wax in hardware stores or crumble wax candles. The mixture is boiled in a water bath. The mixture is still hot, but not too hot, evenly applied to the fabric, lightly squeezed and greasy stains are carefully wiped off with vertical movements. There is no need to rub the greasy stain. After the surface has dried, the furniture is polished with a woolen cloth.

Water stains If stains from wet glasses have formed on the top of a wooden table, these stains can be wiped with the juice of fresh walnut, that is, a cut slice of nut. When the oil released from the nut slices dries, wipe the surface with a cloth. A water stain that has penetrated into the inner layers of wood leaves a whitish sheen. It should first be wiped with regular wheat flour, and then polished with vegetable oil.

Hot cookware stains If wooden furniture is in the kitchen, then stains from hot dishes become almost inevitable. Whitish stains from dishes are the most difficult to remove. Sometimes efforts to remove a stain are completely fruitless. But you can try the following methods. 1. Coat the stain with Vaseline and leave overnight. In the morning, buff the stain with a cloth. 2. Old stain grease with a mixture of vegetable oil and table salt, and after three hours wipe with a woolen cloth. After a few more hours, polish the stained area with a cloth.

Wax stains

The frozen stain from wax dripping onto the surface of the furniture is carefully cut off with a hot knife blade. The knife heats up under the jet hot water, the stain is cut off, and the trace of wax is washed away with a cloth soaked in gasoline. If the stain is still noticeable, apply furniture polish to it.

Iodine stains

Iodine stains can be easily removed from lacquered furniture by scrubbing the surface with half a fresh potato.

Cleaning unpolished furniture

Unpolished furniture is even more vulnerable to various elements. But it can be wiped with a damp swab dipped in water, and washed with warm water and soap.

Cleaning darkened metal fittings Metal parts can be cleaned using the following mixture: ammonia(30 g), chalk or tooth powder (15 g), water (50 g). Stir the mixture well, moisten a flannel cloth and wipe the parts. Then polish to a shine with a cloth. As alternative method You can use baking soda, onion juice and lemon juice for cleaning. Use the mixed mixture first, then polish with chalk moistened with a mixture of ammonia and water in the proportion of 4 parts chalk, 1 part ammonia and 1 part water.

Preventing the appearance of borer beetles Unfortunately, owners of wooden furniture are often forced to deal with a situation where woodworms damage wooden furniture. Bugs breed in dusty, cluttered rooms that are rarely and poorly ventilated. If any furniture is already infested with beetles, it should be taken out of the apartment, since it is impossible to keep track of the insects and sooner or later they will render all the remaining furniture unusable.

It is better to immediately place newly purchased furniture in a well-ventilated room and immediately treat the surfaces with a solution of sodium fluoride or sodium fluoride (200–250 g per bucket of hot water). The solution must be placed carefully and used only after complete cooling.

You can treat furniture with a composition of turpentine (100 parts), wax (5 parts), paraffin (5 parts), creolin (3 parts).

It is best to repeat the treatment in July and January. If the furniture is already affected by woodworms, then 3-4 treatments should be carried out per year.

Updating old unpolished furniture

To renew the surface old furniture, inherited from grandmothers or parents, you can use a wax-turpentine mixture. Place the planed wax in a jar with turpentine, melt the mixture in a water bath until the fractions are mixed. Then apply the composition to the furniture and polish it with a cloth as it dries.

Remember that furniture requires strict storage conditions. By following the manufacturer's recommendations, you will extend the life of wooden furniture by several decades.

Published: 10/19/12

Previously added materials:

It is quite natural that over time, dirt will clog into the pores of wood whose surface has not been treated. To remove it, you cannot do without the usual cleaning products and procedures that you use in everyday life.

This applies most of all to wooden grillages and benches in the sauna, as well as any etched wooden surfaces. You are unlikely to be able to remove stubborn grease stains with just one cleaning. Of the possible bleaching agents, only oxalic acid is relatively harmless to use if you strictly follow the instructions for its use.

Selection of doses.

And although this acid is quite common in nature and even tastes good (rhubarb, sorrel), for bleaching it is used in such a concentration that it must be handled with care. Therefore, its excess must be removed with a large amount of old newspapers, wearing rubber gloves. Never throw away these newspapers outdoors or in wastewater. Pre-treatment produce ammonia only for fresh air. Ammonia is used to remove fat from a wooden surface.

PRO TIP: It goes without saying that only rubber gloves should be used when handling chemicals. And even if the gloves have holes, it is still advisable to work in them. But it’s better to buy new ones if they leak air when inflated. If you inflate the gloves, they will return to their original shape. This way you can dry them inside out.

Thanks to this wetting agent, oxalic acid does not run off, but intensively moisturizes the wood. Therefore, the moistened sponge must be squeezed out very well so that it washes away only the dirt and remnants of ammonia. Apply bleaching liquid only to horizontal surfaces.

How to assess the degree of drying.

If you want to get results within 30-40 minutes, you can speed up the drying process by exposing the surface to warm air. If the result satisfies you, then treat all surfaces with Kaiser Natron, dissolving one sachet in 5 liters of water. This product (you can buy it at a pharmacy) acts on wood in such a way that it becomes very pleasant to the touch.

TOOLS AND MATERIALS REQUIRED:
Whitening powder
Ammonia
Artificial bristle brush
Plastic bowl
Dish sponge
Heat dryer
Abrasive material

Bleach powder, ammonia and acid-resistant utensils

The effect of ammonia on the respiratory and olfactory organs is undesirable

You can remove dirt with a kitchen sponge and brush.

Brilliant results will be ensured professional products“For wooden floors” and proven traditional methods, but before we start, we will introduce you to our partners http://magia-pola.ru/catalog/vinyl_tile/, they have the largest and most vibrant catalog in Russia

Wooden floors are more susceptible to contamination than flooring with modern protective and decorative coatings. However, there are several ways to properly clean floors, depending on the type of board and its treatment. I'll tell you about this.

What should you consider?

Any problem is solved taking into account the type of board, its coating and the type of contamination.

The parquet floor should not be wetted with water, otherwise it will quickly become unusable.

Excessive moisturizing is unacceptable, even if the planks are varnished, since the parquet floor is laid from equally small planks. They are tightly fitted one to another. This cladding is concrete or wooden base has many joints in which water is retained and destroys the wood over time.

The “For Parquet” product will provide high-quality cleaning and will not damage the expensive wooden flooring.

The means are also selected specially- specifically for parquet. They form a shiny protective film, polish the boards and close the cracks.

Varnished plank floors also require a special approach to cleaning.

And the boardwalk is made from large boards. Their sizes are different. And in order to clean the plank floor, its own nuances are taken into account. Namely, whether it is painted or not. Therefore, care wood covering depends also on its processing:

All joints can be cleaned with a regular vacuum cleaner with a floor attachment.

• You need to vacuum the floor first, that is, use dry washing. This applies to all wood flooring. After all, it is very difficult to wash out dust in cracks and joints, even using the most effective cleaning agent;
• Then wet cleaning begins wood floors.

How to clean plank floors

Ideally, you can wash the board covering only with your hands and a soft cloth, but not with a mop!

Wood cannot be cleaned with dry cleaning agents., with abrasives, undissolved soda. Hard brushes and rags will also scratch it.

A fleecy cotton cloth will remove all dirt without damaging the varnish.

When choosing which rag is best to wash the floor with, we will prefer cotton. It wrings out well, is soft, and adheres to the surface as much as possible. The result is a perfectly clean floor.

For daily cleaning You just need to lightly moisten the mop head.

Ordinary cleaning – pure water and a damp (not dripping) mop.

General– using diluted floor cleaner. The flooring is generously moistened with it, the cracks are washed out, and then the wet surface is wiped dry.

Method 1. How to wash an unpainted floor

Unpainted flooring is the most difficult to maintain - wood absorbs dust and moisture.

Before washing, unpainted floors must be freed from debris with a vacuum cleaner. Particular attention is paid to the joints of the boards. After all, it is in these irregularities that dirt is deposited and is especially noticeable. And it’s not easy to wash it out even with a brush.

Unpainted wood deteriorates from moisture: it swells and bends.

Then the stains are examined, because different contaminants are removed in different ways.

Professional compounds will cope with many stains

Proven old ways:

• Baking soda powder eliminates black marks from shoes (it can be used on unpainted surfaces). You need to sprinkle baking soda on the dark mark, and then wipe the area with a damp sponge. And the grains of soda will be sucked in by the vacuum cleaner.
• Alcohol or vodka You can remove any stain from wood. Then use a sponge and soda to clean off the mark.
• A solution of ammonia You need to wash the sticky stains first, it will easily remove them. Then remove the remaining sticky substance with a spatula.

Having eliminated all stains, you can begin general washing.

Here's what's best for cleaning floors if they're unpainted:

• take lime and sand(you need to mix 50g and 150g respectively);
• add 4 liters of water to the mixture;
• then with a soft brush wash unpainted boards.

This solution will perfectly clean unpainted wood flooring and also disinfect it. After drying, vacuum the floor.

Baking soda and vinegar are age-old products for cleaning and disinfecting plank floors.

Soda solution– more accessible remedy. Dilute half a pack of baking soda with 4 liters of water. Then wash the boards with a brush.

Vinegar and ammonia(2 tablespoons in 5 liters of water) - this composition can be used to wash the floors in the store and at home. It will ideally remove dirt from an unpainted wooden surface.

Let's look at how to properly wash floors after renovation.:

• Sweep with a broom various garbage;
• Go through a vacuum cleaner to completely clean the boardwalk from construction dust. Now the ingrained dirt is already visible on it, as well as stains from paint, glue, plaster;

Makes your work easier special remedy and a hard sponge.

• We use products from the “Everything for Repair” line. Using these universal developments, you can quickly eliminate all repair debris.

People's Councils, how to wash floors after renovation, they offer proven compositions from available ingredients:

• sandpaper carefully wipe off traces of glue without removing the paint;
• brush clean off drops of plaster and lime;
• a glass of kerosene or gasoline in a bucket of water will refresh the wood after repair;
• diluted vinegar will immediately eliminate the pungent kerosene smell.

After washing, the surface is waxed - this is its protective layer.

The cleaned flooring is treated with a moisture-protecting agent with the addition of wax or silicone (the price of this composition is reasonable).

Method 2. How to clean painted plank floors

Brightly colored flooring may fade if not washed properly.

Painted floors are easier to clean. After all, dirt does not eat into the wood due to the monolithic layer of paint:

• Dilute vinegar or ammonia in water(1 spoon per 1 liter) and moisten a mop sponge or rag with the resulting solution;
• The mop should glide without leaving the surface. The correct way to wash the floor is to move the mop like a sailor: “figure eight”;
• For shine You can make a solution of 2 tablespoons of vinegar, 1 tablespoon of preparation for the shine of cabinet furniture and 2 liters of water.

It is not recommended to rub the surface with wax or oil-containing substances, since painted wood does not absorb them, and instead of shine, sticky dirt will soon form.

Household chemicals are the solution to the problem of how to quickly clean the floors at home.

Stains from painted boards are removed locally with alcohol. Then “For the floor” products are used - they thoroughly wash the entire surface.

Such moistening is permissible only during “general” cleaning, and not daily

Urine mark can also be washed. You will need:

• Dry cloth. Urine from a baby or pet gets eaten into wood structure. Therefore, it is immediately collected with a dry cloth.
• Dish detergent. Then gently wash the stain with dish soap.
• Ammonia. Next, wipe with ammonia diluted in a glass of warm water. It will return shine and uniformity to the surface.
• Vinegar. But washing the floor with vinegar and water (1:10) will eliminate bad smell and will refresh the color of painted boards.

The use of chlorine-containing products on a painted surface is undesirable: the smell will disappear, but the surface will brighten forever.

The final stage is to wipe the floor dry.

How to wash parquet

How to clean wooden floors? Clean parquet floors regularly better water with vinegar.

Expensive, exquisite parquet flooring must be washed from dirt carefully and preferably with your own hands. After all, its protection from damage is important. Often parquet flooring is not varnished, but simply rubbed carefully and regularly.

Lacquered parquet flooring should not be cleaned with dry powders to avoid scratching the varnish. And you need to regularly refresh it with polish.

For frequent washing you can purchase a special steam mop (pictured) so that the coating does not get wet

Moisture will penetrate even with a water-repellent coating: into microscopic crevices, cracks, holes. Then the wood will become deformed, the floor will begin to creak, and the parquet boards will fall out.

Method 3. Professional parquet care

Only gel formulas - and no powders!

Now there are many products for such plank floors. And the instructions for their use guarantee desired result. Of course, they make labor-intensive wet cleaning much easier.

When fighting stains, it is better to beat the product until foam forms - it will wash the surface without penetrating deep into the surface.

You should wash the floor with a slightly damp cloth - the foam cleans well without excess moisture.

The selected solution must be marked “for parquet”.

New formulas eliminate greasy stains and stubborn old dirt.

Such compositions cope, in addition to effectively removing dirt, with several more tasks:

• Form a protective wax or silicone film;
• Gives a glossy polymer shine;
• Leave no streaks;
• Gives wood moisture resistance;
• Does not require rinsing;
• Effective even in cold water;
• Non-toxic and safe.

The usual use is to dilute the composition in water and wash the floor.

It will protect and renew wooden floors from scratches.

Conclusion

Now, having learned the recommendations and tips, you can easily wash the floor with a brilliant result, and admire the well-groomed wooden floor for a long time. And now I suggest you familiarize yourself with the video in this article - it gives a clear example of how to wash such flooring. We can discuss your questions and ideas in the comments - write!

Each apartment, house or office space has furniture that differs from each other in quality, technical characteristics, materials from which it is made, etc.

From time to time it is necessary to clean the furniture, as dust, dirt, and greasy stains settle on it, which can sometimes be quite difficult to get rid of.

In order not to damage the surfaces of the furniture during cleaning, you should know what products can be used and how to wash it correctly. In this article we will talk about popular ways to care for polished and other furniture at home.

Do you need to clean your wooden furniture? What are the most common methods? First of all, it is worth noting that wooden furniture requires constant care. Wood is one of the most popular materials in furniture production.

Wooden furniture samples must be cleaned every day (wipe dust), once a week general cleaning to remove stubborn stains. In this case, you should use a special soft brush and exclusively natural cleaning products.

The most common recipes for caring for wooden furniture The following techniques include:

1. Baby soap should be added to 500 ml of water and stirred. With this composition, you can begin to clean dirty areas using a regular cloth. Once cleaning is complete, you will need to wipe the furniture with a dry cloth.
2. A mixture of water and lemon essential oil is applied to a sponge and cleans the surface of the furniture. Essential oil is an excellent component for polishing furniture. In addition to excellent cleaning properties, essential oil lemon has a pleasant smell that will remain on the furniture for some time.
3. Mix 50 ml olive oil with 100 ml vinegar. The prepared solution is poured into a spray bottle, gently sprayed onto the furniture and wiped with a cloth. After this procedure, polished furniture will look like new.
4. Add 50 ml to 50 ml of water lemon juice. This is an excellent furniture care product that does not leave streaks. First you need to clean the furniture with a cloth soaked in this solution, and then wipe it with a dry sponge or cloth.
5. Add 10 ml of ammonia to 60 ml of water, wipe the surface of the furniture with the solution. This product can cope with the most difficult stains.
6. One of the most popular ways to combat white stains on furniture after hot dishes is Vaseline. They need to treat the problem area and leave it overnight, and polish it in the morning.

You can clean polished furniture at home using available products.

One of the most famous traditional methods are the following products.

1. . You need to take 1 potato tuber, peel it and cut it in half. Any dirt on the furniture should be wiped off. raw potatoes, and then wipe dry with a dry cloth.

Polished furniture does not need to be cleaned with a damp cloth, as the polish wears off and disappears former shine. Lacquered furniture Do not clean with soapy solutions, as this may damage the surface.

1. Burr oil. To wash furniture with it, you need to apply this product to a cotton swab and wrap it in a cotton cloth so that the oil can drain onto the surface of the furniture. You need to wipe the furniture with this rag, clean off any remaining oil with a dry cloth, and polish it with a flannel.
2. Flour and vegetable oil . You can clean furniture perfectly with this composition.
3. Salt and vegetable oil. If there are stubborn stains left on the furniture from or any other hot product, wipe them with a cloth soaked in oil and salt. You can apply salt and oil to the stain and wait a few hours, then remove this mixture and wipe the stain with a rag.
4. Vinegar. This product is ideal for cleaning heavily soiled furniture.
5. Brine from under sauerkraut . Apply it to stains and wipe off with a rag.

Of course, that's not all known methods cleaning polished furniture with improvised means, but the most basic and popular.

Concerning upholstered furniture, then its care will depend on the type of fabric used in its production.

How to clean this furniture to keep the upholstery in great condition? For example, removable covers can be washed in a washing machine at a certain temperature.

In other cases, you will need to use sponges and brushes for quality cleaning.

Sofas in front wet cleaning should be vacuumed every week.

Corners and seams should be cleaned monthly with a brush. It accumulates in these places large quantity dust.

When cleaning furniture with long piles, you will also need a brush. It is recommended to use natural cleaning products that will not cause a negative effect.

If there are traces of wax on the furniture, they can be cleaned without damaging the surface of the furniture. To do this, you need to heat the knife in boiling water and use the blunt side to clean off the dried wax. Next, use a gasoline rag to wipe the area where the wax mark was.

If, for example, you stained a table with ink, then cleaning such stains at home will be as easy as shelling pears. To do this, you need to take heated beer and pour it over the stain, wait until everything dries, spread wax on the stain and polish.

Besides, in various stores for sale wide choose products that are ideal for cleaning polished furniture at home.

In order to keep your furniture clean, you should adhere to a few simple rules.

1. Regular care of furniture is a guarantee of its cleanliness and beauty.
2. Refusal household chemicals When caring for furniture at home, it will help avoid allergies.
3. The use of soft fabrics and sponges when caring for furniture will help prevent scratches and damage.
4. A soft brush will help to thoroughly clean furniture that has threads.
5. Avoid alcohol, cologne and acetone when cleaning furniture, as they dull the surface.

If, over time, polished furniture has faded or changed color, you must adhere to the following tips:

• wipe off dust, clean the furniture surface with warm water and wipe with a dry soft cloth;
• next step is preparation special solution, consisting of linseed oil and turpentine, as well as table vinegar;
• mix all the components, moisten a cotton swab in the resulting solution and treat the furniture surface with it;
• Furniture should be cleaned quickly enough so that its surface does not heat up. In this case, the oil reacts with other components, oxidizes and returns the furniture to its former shine and beauty.

Sticking to these simple recommendations, you will be able to maintain all the furniture in your home in perfect order, and it will look like new. And it costs a lot, because to buy new furniture due to education old stains, which can be easily dealt with, would simply be unwise.